- 18 Oct, 2021 4 commits
-
-
Takashi Iwai authored
UAPI headers are built with -std=c90 and C++ style comments are explicitly prohibited. The recent commit overlooked the rule and caused the error at header installation. This patch corrects those. Fixes: bea36afa ("ALSA: firewire-motu: add message parser to gather meter information in register DSP model") Fixes: 90b28f3b ("ALSA: firewire-motu: add message parser for meter information in command DSP model") Fixes: 634ec0b2 ("ALSA: firewire-motu: notify event for parameter change in register DSP model") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20211018113812.0a16efb0@canb.auug.org.au Link: https://lore.kernel.org/r/20211018063700.30834-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
We've had an x86-specific SG-buffer handling code, but now it can be merged gracefully with the standard non-contiguous DMA pages. After the migration, SNDRV_DMA_TYPE_DMA_SG becomes identical with SNDRV_DMA_TYPE_NONCONTIG on x86, while others still fall back to SNDRV_DMA_TYPE_DEV. The remaining problem is about the SG-buffer with WC pages: the DMA core stuff on x86 doesn't treat it well, so we still need some special handling to manipulate the page attribute manually. The mmap handler for SNDRV_DMA_TYPE_DEV_SG_WC still returns -ENOENT intentionally for the fallback to the default handler. Link: https://lore.kernel.org/r/20211017074859.24112-4-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Following to the addition of non-contiguous pages, this patch adds the new contiguous non-coherent page allocation to the standard memalloc helper. Like the previous non-contig type, this non-coherent type is also directional and requires the explicit sync, too. Hence the driver using this type of buffer may need to set SNDRV_PCM_INFO_EXPLICIT_SYNC flag to the PCM hardware.info as well, unless it's set up in the managed mode. Link: https://lore.kernel.org/r/20211017074859.24112-3-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
This patch adds the support for allocation of non-contiguous DMA pages in the common memalloc helper. It's another SG-buffer type, but unlike the existing one, this is directional and requires the explicit sync / invalidation of dirty pages on non-coherent architectures. For this enhancement, the following points are changed: - snd_dma_device stores the DMA direction. - snd_dma_device stores need_sync flag indicating whether the explicit sync is required or not. - A new variant of helper functions, snd_dma_alloc_dir_pages() and *_all() are introduced; the old snd_dma_alloc_pages() and *_all() kept as just wrappers with DMA_BIDIRECTIONAL. - A new helper snd_dma_buffer_sync() is introduced; this gets called in the appropriate places. - A new allocation type, SNDRV_DMA_TYPE_NONCONTIG, is introduced. When the driver allocates pages with this new type, and it may require the SNDRV_PCM_INFO_EXPLICIT_SYNC flag set to the PCM hardware.info for taking the full control of PCM applptr and hwptr changes (that implies disabling the mmap of control/status data). When the buffer allocation is managed by snd_pcm_set_managed_buffer(), this flag is automatically set depending on the result of dma_need_sync() internally. Otherwise, if the buffer is managed manually, the driver has to set the flag explicitly, too. The explicit sync between CPU and device for non-coherent memory is performed at the points before and after read/write transfer as well as the applptr/hwptr syncptr ioctl. In the case of mmap mode, user-space is supposed to call the syncptr ioctl with the hwptr flag to update and fetch the status at first; this corresponds to CPU-sync. Then user-space advances the applptr via syncptr ioctl again with applptr flag, and this corresponds to the device sync with flushing. Other than the DMA direction and the explicit sync, the usage of this new buffer type is almost equivalent with the existing SNDRV_DMA_TYPE_DEV_SG; you can get the page and the address via snd_sgbuf_get_page() and snd_sgbuf_get_addr(), also calculate the continuous pages via snd_sgbuf_get_chunk_size(). For those SG-page handling, the non-contig type shares the same ops with the vmalloc handler. As we do always vmap the SG pages at first, the actual address can be deduced from the vmapped address easily without iterating the SG-list. Link: https://lore.kernel.org/r/20211017074859.24112-2-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
- 17 Oct, 2021 1 commit
-
-
Randy Dunlap authored
On m68k, compiling drivers under SND_ISA causes build errors: ../sound/core/isadma.c: In function 'snd_dma_program': ../sound/core/isadma.c:33:17: error: implicit declaration of function 'claim_dma_lock' [-Werror=implicit-function-declaration] 33 | flags = claim_dma_lock(); | ^~~~~~~~~~~~~~ ../sound/core/isadma.c:41:9: error: implicit declaration of function 'release_dma_lock' [-Werror=implicit-function-declaration] 41 | release_dma_lock(flags); | ^~~~~~~~~~~~~~~~ ../sound/isa/sb/sb16_main.c: In function 'snd_sb16_playback_prepare': ../sound/isa/sb/sb16_main.c:253:72: error: 'DMA_AUTOINIT' undeclared (first use in this function) 253 | snd_dma_program(dma, runtime->dma_addr, size, DMA_MODE_WRITE | DMA_AUTOINIT); | ^~~~~~~~~~~~ ../sound/isa/sb/sb16_main.c:253:72: note: each undeclared identifier is reported only once for each function it appears in ../sound/isa/sb/sb16_main.c: In function 'snd_sb16_capture_prepare': ../sound/isa/sb/sb16_main.c:322:71: error: 'DMA_AUTOINIT' undeclared (first use in this function) 322 | snd_dma_program(dma, runtime->dma_addr, size, DMA_MODE_READ | DMA_AUTOINIT); | ^~~~~~~~~~~~ and more... Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: alsa-devel@alsa-project.org Cc: linux-m68k@lists.linux-m68k.org Cc: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20211016062602.3588-1-rdunlap@infradead.orgSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
- 15 Oct, 2021 11 commits
-
-
Takashi Sakamoto authored
This commit copies queued event for change of register DSP into userspace when application operates ALSA hwdep character device. The notification occurs only when packet streaming is running. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20211015080826.34847-12-o-takashi@sakamocchi.jpSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Sakamoto authored
This commit is a preparation to notify parameter change of register DSP to userspace application. A simple queue is added to store encoded data for the change as long as ALSA hwdep character device is opened by application. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20211015080826.34847-11-o-takashi@sakamocchi.jpSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Sakamoto authored
This patch adds new ioctl command for userspace applications to read cached parameters of register DSP. The structured data includes model-dependent parameters. Userspace application should be carefully programmed so that what parameter is common and specific. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20211015080826.34847-10-o-takashi@sakamocchi.jpSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Sakamoto authored
This commit parses message and cache current parameters of input function, available for MOTU Ultralite, 4 pre, and Audio Express. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20211015080826.34847-9-o-takashi@sakamocchi.jpSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Sakamoto authored
This commit parses message and cache current parameters of line input function, available for MOTU 828 mk2 and Traveler. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20211015080826.34847-8-o-takashi@sakamocchi.jpSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Sakamoto authored
This commit parses message and cache current parameters of output function, commonly available for all of register DSP model. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20211015080826.34847-7-o-takashi@sakamocchi.jpSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Sakamoto authored
This commit parses message and cache current parameters of mixer output function, commonly available for all of register DSP model Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20211015080826.34847-6-o-takashi@sakamocchi.jpSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Sakamoto authored
In register DSP models, current parameters of DSP are always reported by messages in isochronous packet. When user operates hardware component such as rotary knob, corresponding message is changed. This commit parses the message and cache current parameters of mixer source function, commonly available for all of register DSP models. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20211015080826.34847-5-o-takashi@sakamocchi.jpSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Sakamoto authored
This patch adds new ioctl commands for userspace applications to read cached image about hardware meters in register DSP and command DSP models. The content of image differs depending on models. Model-specific parser should be implemented in userspace. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20211015080826.34847-4-o-takashi@sakamocchi.jpSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Sakamoto authored
Some of MOTU models allows software to configure their DSP parameters by command included in asynchronous transaction. The models multiplex messages for hardware meters into isochronous packet as well as PCM frames. For convenience, I call them as 'command DSP' model. This patch adds message parser for them to gather hardware meter information. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20211015080826.34847-3-o-takashi@sakamocchi.jpSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Sakamoto authored
Some of MOTU models allows software to configure their DSP parameters by accessing to their registers. The models multiplex messages for status of DSP into isochronous packet as well as PCM frames. The message includes information of hardware metering, MIDI message, current parameters of DSP. For my convenience, I call them as 'register DSP' model. This patch adds message parser for them to gather hardware meter information. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20211015080826.34847-2-o-takashi@sakamocchi.jpSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
- 14 Oct, 2021 7 commits
-
-
Takashi Iwai authored
Both snd_pcm_delay() and snd_pcm_hwsync() do the almost same thing. The only difference is that the former calculate the delay, so unify them as a code cleanup, and treat NULL delay argument only for hwsync operation. Also, the patch does a slight code refactoring in snd_pcm_delay(). The initialization of the delay value is done in the caller side now. Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20211014145323.26506-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
So far we used to read the current value of the mixer element dynamically at the first access, and the error from a GET_CUR message is treated as a fatal error (unless QUIRK_IGNORE_CTL_ERROR is set). It's rather inconvenient, as most of GET_CUR errors are no fatal, and we can continue operation with assumption of some fixed value. This patch makes the USB-audio driver to change the behavior at probe time; now it tries to initialize the current value of each mixer element that is built from a feature unit (those for typically for mixer volumes and switches). When a read failure happens, it tries to set the known minimum value. After that point, a cached value is used always, hence we won't hit GET_CUR message error any longer. The error from GET_CUR message is still shown as a warning normally, but only once at the probe time, and it'll keep operating. If the message is confirmed to be harmless, it can be shut up by QUIRK_IGNORE_CTL_ERROR quirk flag, too. Tested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20211014130636.17860-4-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The error from snd_usb_lock_shutdown() indicates that the device is disconnected, hence it makes no sense to show any further control message error in get_ctl_value_v2(). Return the error directly instead. Tested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20211014130636.17860-3-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The error message in get_ctl_value_v2() (for UAC2/3) is shown via KERN_ERR level but it was intended to be rather a debug message as seen in get_ctl_value_v1() (for UAC1). This patch downgrade the printk level. Tested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20211014130636.17860-2-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
A back-merge of 5.15 branch into 5.16-devel branch for further development of USB and ALSA core stuff that depends on 5.15 fixes. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Steven Clarkson authored
Apply existing PCI quirk to the Clevo PC50HS and related models to fix audio output on the built in speakers. Signed-off-by: Steven Clarkson <sc@lambdal.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211014133554.1326741-1-sc@lambdal.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Greg Kroah-Hartman authored
The Shciit Hel device responds to the ctl message for the mic capture switch with a timeout of -EPIPE: usb 7-2.2: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x1100, type = 1 usb 7-2.2: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x1100, type = 1 usb 7-2.2: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x1100, type = 1 usb 7-2.2: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x1100, type = 1 This seems safe to ignore as the device works properly with the control message quirk, so add it to the quirk table so all is good. Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: alsa-devel@alsa-project.org Cc: linux-usb@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/YWgR3nOI1osvr5Yo@kroah.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
- 12 Oct, 2021 4 commits
-
-
Jonas Hahnfeld authored
The device advertises 8 formats, but only a rate of 48kHz is honored by the hardware and 24 bits give chopped audio, so only report the one working combination. This fixes out-of-the-box audio experience with PipeWire which otherwise attempts to choose S24_3LE (while PulseAudio defaulted to S16_LE). Signed-off-by: Jonas Hahnfeld <hahnjo@hahnjo.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211012200906.3492-1-hahnjo@hahnjo.deSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Kai Vehmanen authored
The snd_hdac_bus_reset_link() contains logic to clear STATESTS register before performing controller reset. This code dates back to an old bugfix in commit e8a7f136 ("[ALSA] hda-intel - Improve HD-audio codec probing robustness"). Originally the code was added to azx_reset(). The code was moved around in commit a41d1224 ("ALSA: hda - Embed bus into controller object") and ended up to snd_hdac_bus_reset_link() and called primarily via snd_hdac_bus_init_chip(). The logic to clear STATESTS is correct when snd_hdac_bus_init_chip() is called when controller is not in reset. In this case, STATESTS can be cleared. This can be useful e.g. when forcing a controller reset to retry codec probe. A normal non-power-on reset will not clear the bits. However, this old logic is problematic when controller is already in reset. The HDA specification states that controller must be taken out of reset before writing to registers other than GCTL.CRST (1.0a spec, 3.3.7). The write to STATESTS in snd_hdac_bus_reset_link() will be lost if the controller is already in reset per the HDA specification mentioned. This has been harmless on older hardware. On newer generation of Intel PCIe based HDA controllers, if configured to report issues, this write will emit an unsupported request error. If ACPI Platform Error Interface (APEI) is enabled in kernel, this will end up to kernel log. Fix the code in snd_hdac_bus_reset_link() to only clear the STATESTS if the function is called when controller is not in reset. Otherwise clearing the bits is not possible and should be skipped. Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20211012142935.3731820-1-kai.vehmanen@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The recent support for the improved low-latency playback mode applied the SNDRV_PCM_INFO_EXPLICIT_SYNC flag for the target streams, but this was a slight overkill. The use of the flag above disables effectively both PCM status and control mmaps, while basically what we want to track is only about the appl_ptr update. For less restriction, use a more proper flag, SNDRV_PCM_INFO_SYNC_APPLPTR instead, which disables only the control mmap. Fixes: d5f871f8 ("ALSA: usb-audio: Improved lowlatency playback support") Link: https://lore.kernel.org/r/20211011103650.10182-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Hui Wang authored
We need to define the codec pin 0x1b to be the mic, but somehow the mic doesn't support hot plugging detection, and Windows also has this issue, so we set it to phantom headset-mic. Also the determine_headset_type() often returns the omtp type by a mistake when we plug a ctia headset, this makes the mic can't record sound at all. Because most of the headset are ctia type nowadays and some machines have the fixed ctia type audio jack, it is possible this machine has the fixed ctia jack too. Here we set this mic jack to fixed ctia type, this could avoid the mic type detection mistake and make the ctia headset work stable. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214537Reported-and-tested-by: msd <msd.mmq@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20211012114748.5238-1-hui.wang@canonical.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
- 11 Oct, 2021 2 commits
-
-
Takashi Iwai authored
Michael Forney reported an incorrect padding type that was defined in the commit 80fe7430 ("ALSA: add new 32-bit layout for snd_pcm_mmap_status/control") for PCM control mmap data. His analysis is correct, and this caused the misplacements of PCM control data on 32bit arch and 32bit compat mode. The bug is that the __pad2 definition in __snd_pcm_mmap_control64 struct was wrongly with __pad_before_uframe, which should have been __pad_after_uframe instead. This struct is used in SYNC_PTR ioctl and control mmap. Basically this bug leads to two problems: - The offset of avail_min field becomes wrong, it's placed right after appl_ptr without padding on little-endian - When appl_ptr and avail_min are read as 64bit values in kernel side, the values become either zero or corrupted (mixed up) One good news is that, because both user-space and kernel misunderstand the wrong offset, at least, 32bit application running on 32bit kernel works as is. Also, 64bit applications are unaffected because the padding size is zero. The remaining problem is the 32bit compat mode; as mentioned in the above, avail_min is placed right after appl_ptr on little-endian archs, 64bit kernel reads bogus values for appl_ptr updates, which may lead to streaming bugs like jumping, XRUN or whatever unexpected. (However, we haven't heard any serious bug reports due to this over years, so practically seen, it's fairly safe to assume that the impact by this bug is limited.) Ideally speaking, we should correct the wrong mmap status control definition. But this would cause again incompatibility with the existing binaries, and fixing it (e.g. by renumbering ioctls) would be really messy. So, as of this patch, we only correct the behavior of 32bit compat mode and keep the rest as is. Namely, the SYNC_PTR ioctl is now handled differently in compat mode to read/write the 32bit values at the right offsets. The control mmap of 32bit apps on 64bit kernels has been already disabled (which is likely rather an overlook, but this worked fine at this time :), so covering SYNC_PTR ioctl should suffice as a fallback. Fixes: 80fe7430 ("ALSA: add new 32-bit layout for snd_pcm_mmap_status/control") Reported-by: Michael Forney <mforney@mforney.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Cc: <stable@vger.kernel.org> Cc: Rich Felker <dalias@libc.org> Link: https://lore.kernel.org/r/29QBMJU8DE71E.2YZSH8IHT5HMH@mforney.org Link: https://lore.kernel.org/r/20211010075546.23220-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Cameron Berkenpas authored
The previous patch's HDA verb initialization for the Lenovo 13s sequence was slightly off. This updated verb sequence has been tested and confirmed working. Fixes: ad7cc2d4 ("ALSA: hda/realtek: Quirks to enable speaker output for Lenovo Legion 7i 15IMHG05, Yoga 7i 14ITL5/15ITL5, and 13s Gen2 laptops.") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208555 Cc: <stable@vger.kernel.org> Signed-off-by: Cameron Berkenpas <cam@neo-zeon.de> Link: https://lore.kernel.org/r/20211010225410.23423-1-cam@neo-zeon.deSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
- 10 Oct, 2021 1 commit
-
-
William Overton authored
The kernel already has support for very similar Pioneer djm products and this work is based on that. Added device to quirks-table.h and added control info to mixer_quirks.c. Tested on my hardware and all working. Signed-off-by: William Overton <willovertonuk@gmail.com> Link: https://lore.kernel.org/r/20211010145841.11907-1-willovertonuk@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
- 07 Oct, 2021 3 commits
-
-
Takashi Iwai authored
When a stream is in the implicit feedback mode, it's more or less tied with a capture stream. Passing SNDRV_PCM_INFO_JOINT_DUPLEX may help for user-space to understand the situation. Link: https://lore.kernel.org/r/20211007083528.4184-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
In the case of hot-disconnection of a PCM device, all file operations except for close should be rejected. This patch adds more sanity checks in the file operation code paths. Link: https://lore.kernel.org/r/20211006142214.3089-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
It seems that a few recent AMD systems show the codec configuration errors at the early boot, while loading the driver at a later stage works magically. Although the root cause of the error isn't clear, it's certainly not bad to allow retrying the codec probe in such a case if that helps. This patch adds the capability for retrying the probe upon codec probe errors on the certain AMD platforms. The probe_work is changed to a delayed work, and at the secondary call, it'll jump to the codec probing. Note that, not only adding the re-probing, this includes the behavior changes in the codec configuration function. Namely, snd_hda_codec_configure() won't unregister the codec at errors any longer. Instead, its caller, azx_codec_configure() unregisters the codecs with the probe failures *if* any codec has been successfully configured. If all codec probe failed, it doesn't unregister but let it re-probed -- which is the most case we're seeing and this patch tries to improve. Even if the driver doesn't re-probe or give up, it will go to the "free-all" error path, hence the leftover codecs shall be disabled / deleted in anyway. BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1190801 Link: https://lore.kernel.org/r/20211006141940.2897-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
- 06 Oct, 2021 1 commit
-
-
Werner Sembach authored
This applies a SND_PCI_QUIRK(...) to the TongFang PHxTxX1 barebone. This fixes the issue of the internal Microphone not working after booting another OS. When booting a certain another OS this barebone keeps some coeff settings even after a cold shutdown. These coeffs prevent the microphone detection from working in Linux, making the Laptop think that there is always an external microphone plugged-in and therefore preventing the use of the internal one. The relevant indexes and values where gathered by naively diff-ing and reading a working and a non-working coeff dump. Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211006130415.538243-1-wse@tuxedocomputers.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
- 05 Oct, 2021 2 commits
-
-
Kailang Yang authored
In power save mode, the recording voice from headset mic will 2s more delay. Add this patch will solve this issue. [ minor coding style fix by tiwai ] Signed-off-by: Kailang Yang <kailang@realtek.com> Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/ccb0cdd5bbd7486eabbd8d987d384cb0@realtek.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The Scarlett device series from Focusrite Novation seem requiring the sample rate validations as we've done for MOTU devices; otherwise the driver probes invalid audioformat entries that contain the sample rates that actually don't work, and this may result in an incomplete setup as reported recently. This patch adds the needed quirk flag for enabling the sample rate validation for Focusrite Novation devices. Fixes: fe773b87 ("ALSA: usb-audio: workaround for iface reset issue") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214493 Link: https://lore.kernel.org/r/20211004074050.28241-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
- 04 Oct, 2021 2 commits
-
-
Werner Sembach authored
This applies a SND_PCI_QUIRK(...) to the Clevo X170KM-G barebone. This fixes the issue of the devices internal Speaker not working. Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211001133111.428249-3-wse@tuxedocomputers.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Werner Sembach authored
The string "Clevo X170" is not enough to unambiguously identify the correct device. Fixing it so another Clevo barebone name starting with "X170" can be added without causing confusion. Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211001133111.428249-2-wse@tuxedocomputers.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
- 01 Oct, 2021 2 commits
-
-
Takashi Iwai authored
The commit d215f63d ("ALSA: usb-audio: Check available frames for the next packet size") introduced the available frame size check, but the conversion forgot to initialize the temporary variable properly, and it resulted in a bogus calculation. This patch fixes it. Fixes: d215f63d ("ALSA: usb-audio: Check available frames for the next packet size") Reported-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20211001104417.14291-1-colin.king@canonical.com Link: https://lore.kernel.org/r/20211001105425.16191-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Chris Chiu authored
The headphone mic is not working on Dell Latitude laptops with ALC3254. The codec vendor id is 0x10ec0295 and share the same pincfg as defined in ALC295_STANDARD_PINS. So the ALC269_FIXUP_DELL1_MIC_NO_PRESENCE will be applied per alc269_pin_fixup_tbl[] but actually the headphone mic is using NID 0x1b instead of 0x1a. The ALC269_FIXUP_DELL4_MIC_NO_PRESENCE need to be applied instead. Use ALC269_FIXUP_DELL4_MIC_NO_PRESENCE for particular models before a generic fixup comes out. Signed-off-by: Chris Chiu <chris.chiu@canonical.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211001062856.1037901-1-chris.chiu@canonical.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-