- 08 Sep, 2013 11 commits
-
-
Nathan Zimmer authored
commit 84a78a65 upstream. Correct an issue with /proc/timer_list reported by Holger. When reading from the proc file with a sufficiently small buffer, 2k so not really that small, there was one could get hung trying to read the file a chunk at a time. The timer_list_start function failed to account for the possibility that the offset was adjusted outside the timer_list_next. Signed-off-by:
Nathan Zimmer <nzimmer@sgi.com> Reported-by:
Holger Hans Peter Freyther <holger@freyther.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Berke Durak <berke.durak@xiphos.com> Cc: Jeff Layton <jlayton@redhat.com> Tested-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kevin Hilman authored
commit 3f0fa9a8 upstream. The use of WARN_ON() needs the definitions from bug.h, without it you can get: include/linux/regmap.h: In function 'regmap_write': include/linux/regmap.h:525:2: error: implicit declaration of function 'WARN_ONCE' [-Werror=implicit-function-declaration] Signed-off-by:
Kevin Hilman <khilman@linaro.org> Signed-off-by:
Mark Brown <broonie@linaro.org> Signed-off-by:
-
Hans Verkuil authored
commit 9504a923 upstream. The IO command size is 128 bytes for these new controllers as opposed to 64 for the old 8001 controller. The Adaptec out-of-tree driver did this correctly. After comparing the two this turned out to be the crucial difference. So don't hardcode the IO command size, instead use pm8001_ha->iomb_size as that is the correct value for both old and new controllers. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Acked-by:
Anand Kumar Santhanam <AnandKumar.Santhanam@pmcs.com> Acked-by:
Jack Wang <xjtuwjp@gmail.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com> Signed-off-by:
-
Eugene Surovegin authored
commit d220980b upstream. This solves a problem observed in kexec'ed kernel where 200ms timeout is too short and bootconsole fails to initialize. Console did eventually become workable but much later into the boot process. Observed timeout was around 260ms, but I decided to make it a little bigger for more reliability. This has been tested on Power7 machine with Petitboot as a primary bootloader and PowerNV firmware. Signed-off-by:
Eugene Surovegin <surovegin@google.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Benjamin Herrenschmidt authored
commit f5f6cbb6 upstream. /proc/powerpc/lparcfg is an ancient facility (though still actively used) which allows access to some informations relative to the partition when running underneath a PAPR compliant hypervisor. It makes no sense on non-pseries machines. However, currently, not only can it be created on these if the kernel has pseries support, but accessing it on such a machine will crash due to trying to do hypervisor calls. In fact, it should also not do HV calls on older pseries that didn't have an hypervisor either. Finally, it has the plumbing to be a module but is a "bool" Kconfig option. This fixes the whole lot by turning it into a machine_device_initcall that is only created on pseries, and adding the necessary hypervisor check before calling the H_GET_EM_PARMS hypercall Signed-off-by:
-
Paul Mackerras authored
commit bdbc29c1 upstream. On 64-bit, __pa(&static_var) gets miscompiled by recent versions of gcc as something like: addis 3,2,.LANCHOR1+4611686018427387904@toc@ha addi 3,3,.LANCHOR1+4611686018427387904@toc@l This ends up effectively ignoring the offset, since its bottom 32 bits are zero, and means that the result of __pa() still has 0xC in the top nibble. This happens with gcc 4.8.1, at least. To work around this, for 64-bit we make __pa() use an AND operator, and for symmetry, we make __va() use an OR operator. Using an AND operator rather than a subtraction ends up with slightly shorter code since it can be done with a single clrldi instruction, whereas it takes three instructions to form the constant (-PAGE_OFFSET) and add it on. (Note that MEMORY_START is always 0 on 64-bit.) Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
-
Takashi Iwai authored
commit fb615499 upstream. The recent commit to delay the release of kobject triggered NULL dereferences of opti9xx drivers. The cause is that all snd-opti92x-ad1848, snd-opti92x-cs4231 and snd-opti93x drivers register the PnP card driver with the very same name, and also snd-opti92x-ad1848 and -cs4231 drivers register the ISA driver with the same name, too. When these drivers are built in, quick "register-release-and-re-register" actions occur, and this results in Oops because of the same name is assigned to the kobject. The fix is simply to assign individual names. As a bonus, by using KBUILD_MODNAME, the patch reduces more lines than it adds. The fix is based on the suggestion by Russell King. Reported-and-tested-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit d3d3835c upstream. Yet another entry, just use the existing fixup for this machine, too. Reported-by:
"Nathanael D. Noblet" <nathanael@gnat.ca> Signed-off-by:
-
Takashi Iwai authored
commit 2ca320e2 upstream. Without the dynamic minor assignment, HDMI codec may have less PCM instances than the number of pins, which eventually leads to Oops. Reported-by:
Stratos Karafotis <stratosk@semaphore.gr> Signed-off-by:
-
Dave Kleikamp authored
commit 44512449 upstream. NFSv4 reserves readdir cookie values 0-2 for special entries (. and ..), but jfs allows a value of 2 for a non-special entry. This incompatibility can result in the nfs client reporting a readdir loop. This patch doesn't change the value stored internally, but adds one to the value exposed to the iterate method. Signed-off-by:
Dave Kleikamp <dave.kleikamp@oracle.com> [bwh: Backported to 3.2: - Adjust context - s/ctx->pos/filp->f_pos/] Tested-by:
Christian Kujau <lists@nerdbynature.de> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Ben Skeggs authored
commit 6ff8c76a upstream. Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
- 29 Aug, 2013 29 commits
-
-
Greg Kroah-Hartman authored
-
Kent Overstreet authored
commit e49c7c37 upstream. Journal writes need to be marked FUA, not just REQ_FLUSH. And btree node writes have... weird ordering requirements. Signed-off-by:
Kent Overstreet <koverstreet@google.com> Signed-off-by:
-
Kumar Amit Mehta authored
commit 5c694129 upstream. bio_alloc_bioset returns NULL on failure. This fix adds a missing check for potential NULL pointer dereferencing. Signed-off-by:
Kumar Amit Mehta <gmate.amit@gmail.com> Signed-off-by:
-
Tomas Winkler authored
commit dab9bf41 upstream. 1. MEI_INTEROP_TIMEOUT is in seconds not in jiffies so we use mei_secs_to_jiffies macro While cold boot is fast this is relevant in resume 2. wait_event_interruptible_timeout can return with -ERESTARTSYS so do not override it with -ETIMEDOUT 3.Adjust error message Tested-by:
Shuah Khan <shuah.kh@samsung.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
Tomas Winkler authored
commit 99f22c4e upstream. When powering up, we don't have to clean up the device state nothing is connected. Tested-by:
-
Tomas Winkler authored
commit 315a383a upstream. ME HW ready bit is down after hw reset was asserted or on error. Only on error we need to enter the reset flow, additional reset need to be prevented when reset was triggered during initialization , power up/down or a reset is already in progress Tested-by:
-
David Vrabel authored
commit 3bc38cbc upstream. If there are UNUSABLE regions in the machine memory map, dom0 will attempt to map them 1:1 which is not permitted by Xen and the kernel will crash. There isn't anything interesting in the UNUSABLE region that the dom0 kernel needs access to so we can avoid making the 1:1 mapping and treat it as RAM. We only do this for dom0, as that is where tboot case shows up. A PV domU could have an UNUSABLE region in its pseudo-physical map and would need to be handled in another patch. This fixes a boot failure on hosts with tboot. tboot marks a region in the e820 map as unusable and the dom0 kernel would attempt to map this region and Xen does not permit unusable regions to be mapped by guests. (XEN) 0000000000000000 - 0000000000060000 (usable) (XEN) 0000000000060000 - 0000000000068000 (reserved) (XEN) 0000000000068000 - 000000000009e000 (usable) (XEN) 0000000000100000 - 0000000000800000 (usable) (XEN) 0000000000800000 - 0000000000972000 (unusable) tboot marked this region as unusable. (XEN) 0000000000972000 - 00000000cf200000 (usable) (XEN) 00000000cf200000 - 00000000cf38f000 (reserved) (XEN) 00000000cf38f000 - 00000000cf3ce000 (ACPI data) (XEN) 00000000cf3ce000 - 00000000d0000000 (reserved) (XEN) 00000000e0000000 - 00000000f0000000 (reserved) (XEN) 00000000fe000000 - 0000000100000000 (reserved) (XEN) 0000000100000000 - 0000000630000000 (usable) Signed-off-by:
David Vrabel <david.vrabel@citrix.com> [v1: Altered the patch and description with domU's with UNUSABLE regions] Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Radu Caragea authored
commit 41aacc1e upstream. This is the updated version of df54d6fa ("x86 get_unmapped_area(): use proper mmap base for bottom-up direction") that only randomizes the mmap base address once. Signed-off-by:
Radu Caragea <sinaelgl@gmail.com> Reported-and-tested-by:
Jeff Shorey <shoreyjeff@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michel Lespinasse <walken@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Adrian Sendroiu <molecula2788@gmail.com> Cc: Kamal Mostafa <kamal@canonical.com> Signed-off-by:
-
Linus Torvalds authored
commit 5ea80f76 upstream. This reverts commit df54d6fa. The commit isn't necessarily wrong, but because it recalculates the random mmap_base every time, it seems to confuse user memory allocators that expect contiguous mmap allocations even when the mmap address isn't specified. In particular, the MATLAB Java runtime seems to be unhappy. See https://bugzilla.kernel.org/show_bug.cgi?id=60774 So we'll want to apply the random offset only once, and Radu has a patch for that. Revert this older commit in order to apply the other one. Reported-by:
-
Roland Dreier authored
commit 35dc2483 upstream. There is a nasty bug in the SCSI SG_IO ioctl that in some circumstances leads to one process writing data into the address space of some other random unrelated process if the ioctl is interrupted by a signal. What happens is the following: - A process issues an SG_IO ioctl with direction DXFER_FROM_DEV (ie the underlying SCSI command will transfer data from the SCSI device to the buffer provided in the ioctl) - Before the command finishes, a signal is sent to the process waiting in the ioctl. This will end up waking up the sg_ioctl() code: result = wait_event_interruptible(sfp->read_wait, (srp_done(sfp, srp) || sdp->detached)); but neither srp_done() nor sdp->detached is true, so we end up just setting srp->orphan and returning to userspace: srp->orphan = 1; write_unlock_irq(&sfp->rq_list_lock); return result; /* -ERESTARTSYS because signal hit process */ At this point the original process is done with the ioctl and blithely goes ahead handling the signal, reissuing the ioctl, etc. - Eventually, the SCSI command issued by the first ioctl finishes and ends up in sg_rq_end_io(). At the end of that function, we run through: write_lock_irqsave(&sfp->rq_list_lock, iflags); if (unlikely(srp->orphan)) { if (sfp->keep_orphan) srp->sg_io_owned = 0; else done = 0; } srp->done = done; write_unlock_irqrestore(&sfp->rq_list_lock, iflags); if (likely(done)) { /* Now wake up any sg_read() that is waiting for this * packet. */ wake_up_interruptible(&sfp->read_wait); kill_fasync(&sfp->async_qp, SIGPOLL, POLL_IN); kref_put(&sfp->f_ref, sg_remove_sfp); } else { INIT_WORK(&srp->ew.work, sg_rq_end_io_usercontext); schedule_work(&srp->ew.work); } Since srp->orphan *is* set, we set done to 0 (assuming the userspace app has not set keep_orphan via an SG_SET_KEEP_ORPHAN ioctl), and therefore we end up scheduling sg_rq_end_io_usercontext() to run in a workqueue. - In workqueue context we go through sg_rq_end_io_usercontext() -> sg_finish_rem_req() -> blk_rq_unmap_user() -> ... -> bio_uncopy_user() -> __bio_copy_iov() -> copy_to_user(). The key point here is that we are doing copy_to_user() on a workqueue -- that is, we're on a kernel thread with current->mm equal to whatever random previous user process was scheduled before this kernel thread. So we end up copying whatever data the SCSI command returned to the virtual address of the buffer passed into the original ioctl, but it's quite likely we do this copying into a different address space! As suggested by James Bottomley <James.Bottomley@hansenpartnership.com>, add a check for current->mm (which is NULL if we're on a kernel thread without a real userspace address space) in bio_uncopy_user(), and skip the copy if we're on a kernel thread. There's no reason that I can think of for any caller of bio_uncopy_user() to want to do copying on a kernel thread with a random active userspace address space. Huge thanks to Costa Sapuntzakis <costa@purestorage.com> for the original pointer to this bug in the sg code. Signed-off-by:
Roland Dreier <roland@purestorage.com> Tested-by:
David Milburn <dmilburn@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Anton Blanchard authored
commit f5944daa upstream. We want ppc64 to be able to select between optimised assembly checksum routines in big endian and the generic lib/checksum.c routines in little endian. The lpfc driver is forcing CONFIG_GENERIC_CSUM on which means we are unable to make the decision to enable it in the arch Kconfig. If the option exists it is always forced on. This got introduced in 3.10 via commit 6a7252fd ([SCSI] lpfc: fix up Kconfig dependencies). I spoke to Randy about it and the original issue was with CRC_T10DIF not being defined. As such, remove the select of CONFIG_GENERIC_CSUM. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
Martin Peschke authored
commit 924dd584 upstream. BUG: sleeping function called from invalid context at kernel/workqueue.c:2752 in_atomic(): 1, irqs_disabled(): 1, pid: 360, name: zfcperp0.0.1700 CPU: 1 Not tainted 3.9.3+ #69 Process zfcperp0.0.1700 (pid: 360, task: 0000000075b7e080, ksp: 000000007476bc30) <snip> Call Trace: ([<00000000001165de>] show_trace+0x106/0x154) [<00000000001166a0>] show_stack+0x74/0xf4 [<00000000006ff646>] dump_stack+0xc6/0xd4 [<000000000017f3a0>] __might_sleep+0x128/0x148 [<000000000015ece8>] flush_work+0x54/0x1f8 [<00000000001630de>] __cancel_work_timer+0xc6/0x128 [<00000000005067ac>] scsi_device_dev_release_usercontext+0x164/0x23c [<0000000000161816>] execute_in_process_context+0x96/0xa8 [<00000000004d33d8>] device_release+0x60/0xc0 [<000000000048af48>] kobject_release+0xa8/0x1c4 [<00000000004f4bf2>] __scsi_iterate_devices+0xfa/0x130 [<000003ff801b307a>] zfcp_erp_strategy+0x4da/0x1014 [zfcp] [<000003ff801b3caa>] zfcp_erp_thread+0xf6/0x2b0 [zfcp] [<000000000016b75a>] kthread+0xf2/0xfc [<000000000070c9de>] kernel_thread_starter+0x6/0xc [<000000000070c9d8>] kernel_thread_starter+0x0/0xc Apparently, the ref_count for some scsi_device drops down to zero, triggering device removal through execute_in_process_context(), while the lldd error recovery thread iterates through a scsi device list. Unfortunately, execute_in_process_context() decides to immediately execute that device removal function, instead of scheduling asynchronous execution, since it detects process context and thinks it is safe to do so. But almost all calls to shost_for_each_device() in our lldd are inside spin_lock_irq, even in thread context. Obviously, schedule() inside spin_lock_irq sections is a bad idea. Change the lldd to use the proper iterator function, __shost_for_each_device(), in combination with required locking. Occurences that need to be changed include all calls in zfcp_erp.c, since those might be executed in zfcp error recovery thread context with a lock held. Other occurences of shost_for_each_device() in zfcp_fsf.c do not need to be changed (no process context, no surrounding locking). The problem was introduced in Linux 2.6.37 by commit b62a8d9b "[SCSI] zfcp: Use SCSI device data zfcp_scsi_dev instead of zfcp_unit". Reported-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
Martin Peschke <mpeschke@linux.vnet.ibm.com> Signed-off-by:
Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by:
-
Martin Peschke authored
commit d79ff142 upstream. This patch adds wait_event_interruptible_lock_irq_timeout(), which is a straight-forward descendant of wait_event_interruptible_timeout() and wait_event_interruptible_lock_irq(). The zfcp driver used to call wait_event_interruptible_timeout() in combination with some intricate and error-prone locking. Using wait_event_interruptible_lock_irq_timeout() as a replacement nicely cleans up that locking. This rework removes a situation that resulted in a locking imbalance in zfcp_qdio_sbal_get(): BUG: workqueue leaked lock or atomic: events/1/0xffffff00/10 last function: zfcp_fc_wka_port_offline+0x0/0xa0 [zfcp] It was introduced by commit c2af7545 "[SCSI] zfcp: Do not wait for SBALs on stopped queue", which had a new code path related to ZFCP_STATUS_ADAPTER_QDIOUP that took an early exit without a required lock being held. The problem occured when a special, non-SCSI I/O request was being submitted in process context, when the adapter's queues had been torn down. In this case the bug surfaced when the Fibre Channel port connection for a well-known address was closed during a concurrent adapter shut-down procedure, which is a rare constellation. This patch also fixes these warnings from the sparse tool (make C=1): drivers/s390/scsi/zfcp_qdio.c:224:12: warning: context imbalance in 'zfcp_qdio_sbal_check' - wrong count at exit drivers/s390/scsi/zfcp_qdio.c:244:5: warning: context imbalance in 'zfcp_qdio_sbal_get' - unexpected unlock Last but not least, we get rid of that crappy lock-unlock-lock sequence at the beginning of the critical section. It is okay to call zfcp_erp_adapter_reopen() with req_q_lock held. Reported-by:
Mikulas Patocka <mpatocka@redhat.com> Reported-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Emmanuel Grumbach authored
commit eabc4ac5 upstream. As Arjan pointed out, we mustn't do anything related to PCI configuration until the device is properly enabled with pci_enable_device(). Reported-by:
Arjan van de Ven <arjan@linux.intel.com> Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Stanislaw Gruszka authored
commit 9186a1fd upstream. If channel switch is pending and we remove interface we can crash like showed below due to passing NULL vif to mac80211: BUG: unable to handle kernel paging request at fffffffffffff8cc IP: [<ffffffff8130924d>] strnlen+0xd/0x40 Call Trace: [<ffffffff8130ad2e>] string.isra.3+0x3e/0xd0 [<ffffffff8130bf99>] vsnprintf+0x219/0x640 [<ffffffff8130c481>] vscnprintf+0x11/0x30 [<ffffffff81061585>] vprintk_emit+0x115/0x4f0 [<ffffffff81657bd5>] printk+0x61/0x63 [<ffffffffa048987f>] ieee80211_chswitch_done+0xaf/0xd0 [mac80211] [<ffffffffa04e7b34>] iwl_chswitch_done+0x34/0x40 [iwldvm] [<ffffffffa04f83c3>] iwlagn_commit_rxon+0x2a3/0xdc0 [iwldvm] [<ffffffffa04ebc50>] ? iwlagn_set_rxon_chain+0x180/0x2c0 [iwldvm] [<ffffffffa04e5e76>] iwl_set_mode+0x36/0x40 [iwldvm] [<ffffffffa04e5f0d>] iwlagn_mac_remove_interface+0x8d/0x1b0 [iwldvm] [<ffffffffa0459b3d>] ieee80211_do_stop+0x29d/0x7f0 [mac80211] This is because we nulify ctx->vif in iwlagn_mac_remove_interface() before calling some other functions that teardown interface. To fix just check ctx->vif on iwl_chswitch_done(). We should not call ieee80211_chswitch_done() as channel switch works were already canceled by mac80211 in ieee80211_do_stop() -> ieee80211_mgd_stop(). Resolve: https://bugzilla.redhat.com/show_bug.cgi?id=979581Reported-by:
Lukasz Jagiello <jagiello.lukasz@gmail.com> Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Reviewed-by:
-
Terry Suereth authored
commit 8ffff94d upstream. Fixing support for the Silicon Image 3826 port multiplier, by applying to it the same quirks applied to the Silicon Image 3726. Specifically fixes the repeated timeout/reset process which previously afflicted the 3726, as described from line 290. Slightly based on notes from: https://bugzilla.redhat.com/show_bug.cgi?id=890237Signed-off-by:
Terry Suereth <terry.suereth@gmail.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Dan Carpenter authored
commit 909bd592 upstream. We want the data stored in "addr" and "qual", but the extra ampersands mean we are copying stack data instead. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Anthony Foiani authored
commit 99bbdfa6 upstream. Before this patch, I was seeing the following lockdep splat on my MPC8315 (PPC32) target: [ 9.086051] ================================= [ 9.090393] [ INFO: inconsistent lock state ] [ 9.094744] 3.9.7-ajf-gc39503d #1 Not tainted [ 9.099087] --------------------------------- [ 9.103432] inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage. [ 9.109431] scsi_eh_1/39 [HC1[1]:SC0[0]:HE0:SE1] takes: [ 9.114642] (&(&host->lock)->rlock){?.+...}, at: [<c02f4168>] sata_fsl_interrupt+0x50/0x250 [ 9.123137] {HARDIRQ-ON-W} state was registered at: [ 9.128004] [<c006cdb8>] lock_acquire+0x90/0xf4 [ 9.132737] [<c043ef04>] _raw_spin_lock+0x34/0x4c [ 9.137645] [<c02f3560>] fsl_sata_set_irq_coalescing+0x68/0x100 [ 9.143750] [<c02f36a0>] sata_fsl_init_controller+0xa8/0xc0 [ 9.149505] [<c02f3f10>] sata_fsl_probe+0x17c/0x2e8 [ 9.154568] [<c02acc90>] driver_probe_device+0x90/0x248 [ 9.159987] [<c02acf0c>] __driver_attach+0xc4/0xc8 [ 9.164964] [<c02aae74>] bus_for_each_dev+0x5c/0xa8 [ 9.170028] [<c02ac218>] bus_add_driver+0x100/0x26c [ 9.175091] [<c02ad638>] driver_register+0x88/0x198 [ 9.180155] [<c0003a24>] do_one_initcall+0x58/0x1b4 [ 9.185226] [<c05aeeac>] kernel_init_freeable+0x118/0x1c0 [ 9.190823] [<c0004110>] kernel_init+0x18/0x108 [ 9.195542] [<c000f6b8>] ret_from_kernel_thread+0x64/0x6c [ 9.201142] irq event stamp: 160 [ 9.204366] hardirqs last enabled at (159): [<c043f778>] _raw_spin_unlock_irq+0x30/0x50 [ 9.212469] hardirqs last disabled at (160): [<c000f414>] reenable_mmu+0x30/0x88 [ 9.219867] softirqs last enabled at (144): [<c002ae5c>] __do_softirq+0x168/0x218 [ 9.227435] softirqs last disabled at (137): [<c002b0d4>] irq_exit+0xa8/0xb4 [ 9.234481] [ 9.234481] other info that might help us debug this: [ 9.240995] Possible unsafe locking scenario: [ 9.240995] [ 9.246898] CPU0 [ 9.249337] ---- [ 9.251776] lock(&(&host->lock)->rlock); [ 9.255878] <Interrupt> [ 9.258492] lock(&(&host->lock)->rlock); [ 9.262765] [ 9.262765] *** DEADLOCK *** [ 9.262765] [ 9.268684] no locks held by scsi_eh_1/39. [ 9.272767] [ 9.272767] stack backtrace: [ 9.277117] Call Trace: [ 9.279589] [cfff9da0] [c0008504] show_stack+0x48/0x150 (unreliable) [ 9.285972] [cfff9de0] [c0447d5c] print_usage_bug.part.35+0x268/0x27c [ 9.292425] [cfff9e10] [c006ace4] mark_lock+0x2ac/0x658 [ 9.297660] [cfff9e40] [c006b7e4] __lock_acquire+0x754/0x1840 [ 9.303414] [cfff9ee0] [c006cdb8] lock_acquire+0x90/0xf4 [ 9.308745] [cfff9f20] [c043ef04] _raw_spin_lock+0x34/0x4c [ 9.314250] [cfff9f30] [c02f4168] sata_fsl_interrupt+0x50/0x250 [ 9.320187] [cfff9f70] [c0079ff0] handle_irq_event_percpu+0x90/0x254 [ 9.326547] [cfff9fc0] [c007a1fc] handle_irq_event+0x48/0x78 [ 9.332220] [cfff9fe0] [c007c95c] handle_level_irq+0x9c/0x104 [ 9.337981] [cfff9ff0] [c000d978] call_handle_irq+0x18/0x28 [ 9.343568] [cc7139f0] [c000608c] do_IRQ+0xf0/0x1a8 [ 9.348464] [cc713a20] [c000fc8c] ret_from_except+0x0/0x14 [ 9.353983] --- Exception: 501 at _raw_spin_unlock_irq+0x40/0x50 [ 9.353983] LR = _raw_spin_unlock_irq+0x30/0x50 [ 9.364839] [cc713af0] [c043db10] wait_for_common+0xac/0x188 [ 9.370513] [cc713b30] [c02ddee4] ata_exec_internal_sg+0x2b0/0x4f0 [ 9.376699] [cc713be0] [c02de18c] ata_exec_internal+0x68/0xa8 [ 9.382454] [cc713c20] [c02de4b8] ata_dev_read_id+0x158/0x594 [ 9.388205] [cc713ca0] [c02ec244] ata_eh_recover+0xd88/0x13d0 [ 9.393962] [cc713d20] [c02f2520] sata_pmp_error_handler+0xc0/0x8ac [ 9.400234] [cc713dd0] [c02ecdc8] ata_scsi_port_error_handler+0x464/0x5e8 [ 9.407023] [cc713e10] [c02ecfd0] ata_scsi_error+0x84/0xb8 [ 9.412528] [cc713e40] [c02c4974] scsi_error_handler+0xd8/0x47c [ 9.418457] [cc713eb0] [c004737c] kthread+0xa8/0xac [ 9.423355] [cc713f40] [c000f6b8] ret_from_kernel_thread+0x64/0x6c This fix was suggested by Bhushan Bharat <R65777@freescale.com>, and was discussed in email at: http://linuxppc.10917.n7.nabble.com/MPC8315-reboot-failure-lockdep-splat-possibly-related-tp75162.html Same patch successfully tested with 3.9.7. linux-next compiled but not tested on hardware. This patch is based off linux-next tag next-20130819 (which is commit 66a01bae29d11916c09f9f5a937cafe7d402e4a5 ) Signed-off-by:
Anthony Foiani <anthony.foiani@gmail.com> Signed-off-by:
-
Anatolij Gustschin authored
commit 52d5b9ab upstream. Commit 94ae9843 (usb: phy: rename all phy drivers to phy-$name-usb.c) renamed drivers/usb/phy/otg_fsm.h to drivers/usb/phy/phy-fsm-usb.h but changed drivers/usb/phy/phy-fsm-usb.c to include not existing "phy-otg-fsm.h" instead of new "phy-fsm-usb.h". This breaks building: ... drivers/usb/phy/phy-fsm-usb.c:32:25: fatal error: phy-otg-fsm.h: No such file or directory compilation terminated. make[3]: *** [drivers/usb/phy/phy-fsm-usb.o] Error 1 This commit also missed to modify drivers/usb/phy/phy-fsl-usb.h to include new "phy-fsm-usb.h" instead of "otg_fsm.h" resulting in another build breakage: ... In file included from drivers/usb/phy/phy-fsl-usb.c:46:0: drivers/usb/phy/phy-fsl-usb.h:18:21: fatal error: otg_fsm.h: No such file or directory compilation terminated. make[3]: *** [drivers/usb/phy/phy-fsl-usb.o] Error 1 Fix both issues. Signed-off-by:
Anatolij Gustschin <agust@denx.de> Signed-off-by:
-
Daniel Drake authored
commit 93dbc1b3 upstream. Being a low-level component, various drivers (e.g. olpc-battery) assume that it is ok to communicate with the OLPC Embedded Controller during probe. Therefore the OLPC EC driver must be initialised before other drivers try to use it. This was the case until it was recently moved out of arch/x86 and restructured around commits ac250415 ("Platform: OLPC: turn EC driver into a platform_driver") and 85f90cf6 ("x86: OLPC: switch over to using new EC driver on x86"). Use arch_initcall so that olpc-ec is readied earlier, matching the previous behaviour. Fixes a regression introduced in Linux-3.6 where various drivers such as olpc-battery and olpc-xo1-sci failed to load due to an inability to communicate with the EC. The user-visible effect was a lack of battery monitoring, missing ebook/lid switch input devices, etc. Signed-off-by:
Daniel Drake <dsd@laptop.org> Cc: Andres Salomon <dilinger@queued.net> Cc: Paul Fox <pgf@laptop.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Vyacheslav Dubeyko authored
commit 4bf93b50 upstream. Fix the issue with improper counting number of flying bio requests for BIO_EOPNOTSUPP error detection case. The sb_nbio must be incremented exactly the same number of times as complete() function was called (or will be called) because nilfs_segbuf_wait() will call wail_for_completion() for the number of times set to sb_nbio: do { wait_for_completion(&segbuf->sb_bio_event); } while (--segbuf->sb_nbio > 0); Two functions complete() and wait_for_completion() must be called the same number of times for the same sb_bio_event. Otherwise, wait_for_completion() will hang or leak. Signed-off-by:
Vyacheslav Dubeyko <slava@dubeyko.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Tested-by:
-
Vyacheslav Dubeyko authored
commit 2df37a19 upstream. Remove double call of bio_put() in nilfs_end_bio_write() for the case of BIO_EOPNOTSUPP error detection. The issue was found by Dan Carpenter and he suggests first version of the fix too. Signed-off-by:
-
Wladislav Wiebe authored
commit 9e401275 upstream. Already existing property flags are filled wrong for properties created from initial FDT. This could cause problems if this DYNAMIC device-tree functions are used later, i.e. properties are attached/detached/replaced. Simply dumping flags from the running system show, that some initial static (not allocated via kzmalloc()) nodes are marked as dynamic. I putted some debug extensions to property_proc_show(..) : .. + if (OF_IS_DYNAMIC(pp)) + pr_err("DEBUG: xxx : OF_IS_DYNAMIC\n"); + if (OF_IS_DETACHED(pp)) + pr_err("DEBUG: xxx : OF_IS_DETACHED\n"); when you operate on the nodes (e.g.: ~$ cat /proc/device-tree/*some_node*) you will see that those flags are filled wrong, basically in most cases it will dump a DYNAMIC or DETACHED status, which is in not true. (BTW. this OF_IS_DETACHED is a own define for debug purposes which which just make a test_bit(OF_DETACHED, &x->_flags) If nodes are dynamic kernel is allowed to kfree() them. But it will crash attempting to do so on the nodes from FDT -- they are not allocated via kzmalloc(). Signed-off-by:
Wladislav Wiebe <wladislav.kw@gmail.com> Acked-by:
Alexander Sverdlin <alexander.sverdlin@nsn.com> Signed-off-by:
Rob Herring <rob.herring@calxeda.com> Signed-off-by:
-
Chris Wilson authored
commit 884020bf upstream. After any "soft gfx reset" we must manually invalidate the TLBs associated with each ring. Empirically, it seems that a suspend/resume or D3-D0 cycle count as a "soft reset". The symptom is that the hardware would fail to note the new address for its status page, and so it would continue to write the shadow registers and breadcrumbs into the old physical address (now used by something completely different, scary). Whereas the driver would read the new status page and never see any progress, it would appear that the GPU hung immediately upon resume. Based on a patch by naresh kumar kachhi <naresh.kumar.kacchi@intel.com> Reported-by:
Thiago Macieira <thiago@kde.org> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=64725Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Tested-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Rafał Miłecki authored
commit d43a93c8 upstream. This bug (introduced in 3.10) in WREG32_OR made commit d3418eac "drm/radeon/evergreen: setup HDMI before enabling it" cause a regression. Sometimes audio over HDMI wasn't working, sometimes display was corrupted. This fixes: https://bugzilla.kernel.org/show_bug.cgi?id=60687 https://bugzilla.kernel.org/show_bug.cgi?id=60709 https://bugs.freedesktop.org/show_bug.cgi?id=67767Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Christian König authored
commit 112a6d0c upstream. When the message buffer is currently moving block until it is idle again. Signed-off-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Alex Deucher authored
commit 022374c0 upstream. Uses the wrong array size for some asics which can lead to garbage getting written to registers. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=60674Signed-off-by:
-
Ian Abbott authored
commit 3955dfa8 upstream. Commit dcd7b8bd ("staging: comedi: put module _after_ detach" by myself) reversed a couple of calls in `comedi_device_attach()` when recovering from an error returned by the low-level driver's 'attach' handler. Unfortunately, that introduced a NULL pointer dereference bug as `dev->driver` is NULL after the call to `comedi_device_detach()`. We still have a pointer to the low-level comedi driver structure in the `driv` variable, so use that instead. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Nicolas Pitre authored
commit ac124504 upstream. Commit f6f91b0d ("ARM: allow kuser helpers to be removed from the vector page") introduced some help text for the CONFIG_KUSER_HELPERS option which is rather contradictory. Let's fix that, and improve it a little. Signed-off-by:
Nicolas Pitre <nico@linaro.org> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
