- 08 Jul, 2024 3 commits
-
-
Bjorn Andersson authored
Merge the IPQ9574 interconnect binding through a topic branch, to make it possible to use the constants in the DeviceTree source branch as well.
-
Satya Priya Kakitapalli authored
SM8150 videocc needs AHB clock, so update the bindings for sm8150 to add the AHB clock. Fixes: df3f61d2 ("dt-bindings: clock: add SM8150 QCOM video clock bindings") Signed-off-by:
Satya Priya Kakitapalli <quic_skakitap@quicinc.com> Link: https://lore.kernel.org/r/20240509-videocc-sm8150-dt-node-v4-1-e9617f65e946@quicinc.comSigned-off-by:
Bjorn Andersson <andersson@kernel.org>
-
Abel Vesa authored
Allow the USB3 second and third GCC PHY pipe clocks to propagate the rate to the pipe clocks provided by the QMP combo PHYs. The first instance is already doing that. Fixes: 161b7c40 ("clk: qcom: Add Global Clock controller (GCC) driver for X1E80100") Signed-off-by:
Abel Vesa <abel.vesa@linaro.org> Reviewed-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240530-x1e80100-clk-gcc-usb3-sec-tert-set-parent-rate-v1-1-7b2b04cad545@linaro.orgSigned-off-by:
-
- 06 Jul, 2024 3 commits
-
-
Varadarajan Narayanan authored
Add interconnect-cells to clock provider so that it can be used as icc provider. Add master/slave ids for Qualcomm IPQ9574 Network-On-Chip interfaces. This will be used by the gcc-ipq9574 driver that will for providing interconnect services using the icc-clk framework. Acked-by:
Georgi Djakov <djakov@kernel.org> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
Varadarajan Narayanan <quic_varada@quicinc.com> Link: https://lore.kernel.org/r/20240430064214.2030013-3-quic_varada@quicinc.comSigned-off-by:
-
Chen Ni authored
Return of_clk_add_hw_provider() in order to transfer the error if it fails. Fixes: 09be1a39 ("clk: qcom: kpss-xcc: register it as clk provider") Signed-off-by:
Chen Ni <nichen@iscas.ac.cn> Reviewed-by:
-
Javier Carrasco authored
`lpass_audiocc_sc8280xp_regmap_config` and `lpasscc_sc8280x_regmap_config` are not modified and can be declared as const to move their data to a read-only section. Signed-off-by:
Javier Carrasco <javier.carrasco.cruz@gmail.com> Reviewed-by:
-
- 02 Jul, 2024 1 commit
-
-
Abel Vesa authored
In case of all pipe clocks, there is a QMP PHY clock that is feeding them. If, for whatever reason, the clock from the PHY is not enabled, halt bit will not get set, and the clock controller driver will assume the clock is stuck in a specific state. The way this is supposed to be properly fixed is to defer the checking of the halt bit until after the PHY clock has been initialized, but doing so complicates the clock controller driver. In fact, since these pipe clocks are consumed by the PHY, while the PHY is also the one providing the source, if clock gets stuck, the PHY driver would be to blame. So instead of checking the halt bit in here, just skip it and assume the PHY driver is handling the source clock correctly. Fixes: 161b7c40 ("clk: qcom: Add Global Clock controller (GCC) driver for X1E80100") Signed-off-by:
Taniya Das <quic_tdas@quicinc.com> Link: https://lore.kernel.org/r/20240628-x1e80100-clk-gcc-fix-halt-check-for-usb-phy-pipe-clks-v2-1-db3be54b1143@linaro.orgSigned-off-by:
-
- 26 Jun, 2024 3 commits
-
-
Chukun Pan authored
The mmc controller of the IPQ6018 does not support HS400 mode. So adjust the maximum clock frequency of sdcc to 200 MHz (HS200). Signed-off-by:
Chukun Pan <amadeus@jmu.edu.cn> Link: https://lore.kernel.org/r/20240620150122.1406631-2-amadeus@jmu.edu.cnSigned-off-by:
-
Bjorn Andersson authored
Merge SM8650 video and camera clock drivers through topic branch, to make available the DeviceTree binding includes to the DeviceTree source branches as well.
-
Jagadeesh Kona authored
Add support for the camera clock controller for camera clients to be able to request for camcc clocks on SM8650 platform. Signed-off-by:
Jagadeesh Kona <quic_jkona@quicinc.com> Reviewed-by:
Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by:
Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Tested-by:
-
- 25 Jun, 2024 6 commits
-
-
Jagadeesh Kona authored
Add device tree bindings for the camera clock controller on Qualcomm SM8650 platform. Signed-off-by:
-
Jagadeesh Kona authored
Update the order of SC8280XP camcc header file in SM8450 camcc bindings. Signed-off-by:
-
Jagadeesh Kona authored
Add support to the SM8650 video clock controller by extending the SM8550 video clock controller, which is mostly identical but SM8650 has few additional clocks and minor differences. Signed-off-by:
-
Jagadeesh Kona authored
Add support for videocc XO clk ares for consumer drivers to be able to request this reset. Fixes: f53153a3 ("clk: qcom: videocc-sm8550: Add video clock controller driver for SM8550") Signed-off-by:
Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240602114439.1611-4-quic_jkona@quicinc.comSigned-off-by:
-
Jagadeesh Kona authored
SM8650 video clock controller has most clocks same as SM8450, but it also has few additional clocks and resets. Add device tree bindings for the video clock controller on Qualcomm SM8650 platform by defining these additional clocks and resets on top of SM8450. Signed-off-by:
-
Jagadeesh Kona authored
Correct the videocc header file name in SM8450 videocc bindings. Fixes: 1e910b2b ("dt-bindings: clock: qcom: Add SM8450 video clock controller") Signed-off-by:
-
- 23 Jun, 2024 7 commits
-
-
Taniya Das authored
Update wait_val fields as per the default hardware values of the GDSC as otherwise it would lead to GDSC FSM state stuck causing power on/off failures of the GSDC. Fixes: 0afa16af ("clk: qcom: add the GPUCC driver for sa8775p") Signed-off-by:
-
Taniya Das authored
The RCG's clk src has to be parked at XO while disabling as per the HW recommendation, hence use clk_rcg2_shared_ops to achieve the same. Also gpu_cc_cb_clk is recommended to be kept always ON, hence use clk_branch2_aon_ops to keep the clock always ON. Fixes: 0afa16af ("clk: qcom: add the GPUCC driver for sa8775p") Signed-off-by:
-
Taniya Das authored
The GPU clocks/GDSCs have been marked critical from the clock driver but the GPU driver votes on these resources as per the HW requirement. In the case where these clocks & GDSCs are left enabled, would have power impact and also cause GPU stability/corruptions. Fix the same by removing the CLK_IS_CRITICAL for clocks and ALWAYS_ON flags for the GPU GDSCs. Fixes: 0afa16af ("clk: qcom: add the GPUCC driver for sa8775p") Signed-off-by:
-
Taniya Das authored
Update the force mem core bit for UFS ICE clock to force the core on signal to remain active during halt state of the clk. If force mem core bit of the clock is not set, the memories of the subsystem will not retain the logic across power states. Fixes: 08c51ceb ("clk: qcom: add the GCC driver for sa8775p") Signed-off-by:
-
Taniya Das authored
Update the GDSC wait_val fields as per the default hardware values as otherwise they would lead to GDSC FSM state to be stuck and causing failures to power on/off. Also add the GDSC flags as applicable and add support to control PCIE GDSC's using collapse vote registers. Fixes: 08c51ceb ("clk: qcom: add the GCC driver for sa8775p") Signed-off-by:
-
Taniya Das authored
The UFS hw ctl clocks are not used by any consumers on SA8775P, and these clocks are not using the correct clock ops to manage the hw ctl of the branch clock, hence remove these clocks. Signed-off-by:
-
Taniya Das authored
The RCG's clk src has to be parked at XO while disabling as per the HW recommendation, hence use clk_rcg2_shared_ops to achieve the same. Fixes: 160758b0 ("clk: qcom: add support for SM8350 GPUCC") Signed-off-by:
-
- 21 Jun, 2024 3 commits
-
-
Luo Jie authored
The clock controller driver of QCA8K depends on MDIO_BUS because of mdio_module_driver used to register the driver. This patch fixes the following undefined symbols. ERROR: modpost: "mdio_driver_register" [drivers/clk/qcom/nsscc-qca8k.ko] undefined! ERROR: modpost: "mdio_driver_unregister" [drivers/clk/qcom/nsscc-qca8k.ko] undefined! ERROR: modpost: "__mdiobus_write" [drivers/clk/qcom/nsscc-qca8k.ko] undefined! ERROR: modpost: "__mdiobus_read" [drivers/clk/qcom/nsscc-qca8k.ko] undefined! Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202406161634.B27sOs8B-lkp@intel.com/ Closes: https://lore.kernel.org/oe-kbuild-all/202406162047.QkUMa2fG-lkp@intel.com/Signed-off-by:
Luo Jie <quic_luoj@quicinc.com> Link: https://lore.kernel.org/r/20240617093806.3461165-1-quic_luoj@quicinc.comSigned-off-by:
-
Lukas Bulwahn authored
Commit 8cab0336 ("clk: qcom: Add QCM2290 GPU clock controller driver") adds the config CLK_QCM2290_GPUCC, which intends to select the support for the QCM2290 Global Clock Controller. It however selects the non-existing config CLK_QCM2290_GCC, whereas the config for the QCM2290 Global Clock Controller is named QCM_GCC_2290. Adjust the config to the intended one. Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@redhat.com> Fixes: 8cab0336 ("clk: qcom: Add QCM2290 GPU clock controller driver") Reviewed-by:
-
Elliot Berman authored
This symbol is selected by a couple drivers, but isn't used by anyone and hasn't been for years now. Drop it. No functional change intended. Signed-off-by:
Elliot Berman <quic_eberman@quicinc.com> Reviewed-by:
Mike Tipton <quic_mdtipton@quicinc.com> Reviewed-by:
-
- 13 Jun, 2024 14 commits
-
-
Konrad Dybcio authored
Add a driver for the GPU clock controller block found on the QCM2290 SoC. Reviewed-by:
-
Konrad Dybcio authored
Commit 134b55b7 ("clk: qcom: support Huayra type Alpha PLL") introduced an entry to the alpha offsets array, but diving into QCM2290 downstream and some documentation, it turned out that the name Huayra apparently has been used quite liberally across many chips, even with noticeably different hardware. Introduce another set of offsets and a new configure function for the Huayra PLL found on QCM2290. This is required e.g. for the consumers of GPUCC_PLL0 to properly start. Reviewed-by:
-
Bjorn Andersson authored
Merge the QCM2290 GPUCC binding through a topic branch to allow for it to also be merged into the DeviceTree branch.
-
Konrad Dybcio authored
Add device tree bindings for graphics clock controller for Qualcomm Technology Inc's QCM2290 SoCs. Reviewed-by:
-
Luo Jie authored
The clock controller driver of qca8386/qca8084 is registered as the MDIO device, the hardware register is accessed by MDIO bus that is normally used to access general PHY device, which is different from the current existed qcom clock controller drivers using ioremap to access hardware clock registers, nsscc-qca8k is accessed via an MDIO bus. MDIO bus is commonly utilized by both qca8386/qca8084 and other PHY devices, so the mutex lock mdio_bus->mdio_lock should be used instead of using the mutex lock of remap. To access the hardware clock registers of qca8386/qca8084, there is a special MDIO frame sequence, which needs to be sent to the device. Enable the reference clock before resetting the clock controller, the reference clock rate is fixed to 50MHZ. Reviewed-by:
-
Luo Jie authored
The previous wrapper qcom_cc_really_probe takes the platform device as parameter, which is limited to platform driver. As for qca8k clock controller driver, which is registered as the MDIO device, which also follows the qcom clock framework. To commonize qcom_cc_really_probe, updating it to take the struct device as parameter, so that the qcom_cc_really_probe can be utilized by the previous platform device and the new added MDIO device. Also update the current clock controller drivers to take &pdev->dev as parameter when calling qcom_cc_really_probe. Reviewed-by:
Stephen Boyd <sboyd@kernel.org> Tested-by:
-
Luo Jie authored
QCA8386/QCA8084 includes the clock & reset controller that is accessed by MDIO bus. Two work modes are supported, qca8386 works as switch mode, qca8084 works as PHY mode. Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Luo Jie authored
Add the clk_branch2_prepare_ops for supporting clock controller where the hardware register is accessed by MDIO bus, and the spin lock can't be used because of sleep during the MDIO operation. The clock is enabled by the .prepare instead of .enable when the clk_branch2_prepare_ops is used. Acked-by:
-
Krzysztof Kozlowski authored
Just like most of Qualcomm clock controllers, we can reference common qcom,gcc.yaml schema to unify the common parts of the binding. Reviewed-by:
-
Krzysztof Kozlowski authored
Just like most of Qualcomm clock controllers, we can reference common qcom,gcc.yaml schema to unify the common parts of the binding. Reviewed-by:
-
Krzysztof Kozlowski authored
Just like most of Qualcomm clock controllers, we can reference common qcom,gcc.yaml schema to unify the common parts of the binding. Reviewed-by:
-
Krzysztof Kozlowski authored
Just like most of Qualcomm clock controllers, we can reference common qcom,gcc.yaml schema to unify the common parts of the binding. Reviewed-by:
-
Krzysztof Kozlowski authored
Just like most of Qualcomm clock controllers, we can reference common qcom,gcc.yaml schema to unify the common parts of the binding. Reviewed-by:
-
Krzysztof Kozlowski authored
Just like most of Qualcomm clock controllers, we can reference common qcom,gcc.yaml schema to unify the common parts of the binding. Reviewed-by:
-
