Object requests that are part of an image request are subject to
some additional handling.  Define rbd_img_obj_request_submit() to
encapsulate that, and use it when initially submitting an image
object request, and when re-submitting it during callback of
an object existence check.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

Separate rbd_osd_req_format() into two functions, one for read
requests and the other for write requests.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

Add the ability to provide an array of pages as outbound request
data for object class method calls.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

This patch makes four small changes in the ceph messenger.

While getting copyup functionality working I found two bugs in the
messenger.  Existing paths through the code did not trigger these
problems, but they're fixed here:
    - In ceph_msg_data_pagelist_cursor_init(), the cursor's
      last_piece field was being checked against the length
      supplied.  This was OK until this commit: ccba6d98 libceph:
      implement multiple data items in a message That commit changed
      the cursor init routines to allow lengths to be supplied that
      exceeded the size of the current data item. Because of this,
      we have to use the assigned cursor resid field rather than the
      provided length in determining whether the cursor points to
      the last piece of a data item.
    - In ceph_msg_data_add_pages(), a BUG_ON() was erroneously
      catching attempts to add page data to a message if the message
      already had data assigned to it. That was OK until that same
      commit, at which point it was fine for messages to have
      multiple data items. It slipped through because that BUG_ON()
      call was present twice in that function. (You can never be too
      careful.)

In addition two other minor things are changed:
    - In ceph_msg_data_cursor_init(), the local variable "data" was
      getting assigned twice.
    - In ceph_msg_data_advance(), it was assumed that the
      type-specific advance routine would set new_piece to true
      after it advanced past the last piece. That may have been
      fine, but since we check for that case we might as well set it
      explicitly in ceph_msg_data_advance().

This resolves:
    http://tracker.ceph.com/issues/4762Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

This is a step toward fully implementing layered writes.

Add checks before request submission for the object(s) associated
with an image request.  For write requests, if we don't know that
the target object exists, issue a STAT request to find out.  When
that request completes, mark the known and exists flags for the
original object request accordingly and re-submit the object
request.  (Note that this still does the existence check only; the
copyup operation is not yet done.)

A new object request is created to perform the existence check.  A
pointer to the original request is added to that object request to
allow the stat request to re-issue the original request after
updating its flags.  If there is a failure with the stat request
the error code is stored with the original request, which is then
completed.

This resolves:
    http://tracker.ceph.com/issues/3418Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

This creates two new flags for object requests to indicate what is
known about the existence of the object to which a request is to be
sent.  The KNOWN flag will be true if the the EXISTS flag is
meaningful.  That is:

    KNOWN   EXISTS
    -----   ------
      0       0     don't know whether the object exists
      0       1     (not used/invalid)
      1       0     object is known to not exist
      1       0     object is known to exist

This will be used in determining how to handle write requests for
data objects for layered rbd images.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

In a few spots, whether the an object request's img_request pointer
is null is used to determine whether an object request is being done
as part of an image data request.

Stop doing that, and instead always use the object request IMG_DATA
flag for that purpose.  Swap the order of the definition of the
IMG_DATA and DONE flag helpers, because obj_request_done_set() now
refers to obj_request_img_data_set() to get its rbd_dev value.

This will become important because the img_request pointer is
about to become part of a union.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

An extra reference is taken when an object request is added as one
of the requests making up an image object.  A reference is dropped
again when the image's object requests get submitted.

The original reference for the object request will remain throughout
this period, so we don't need to add and then take away an extra
one.

This can be interpreted as the image request inheriting the original
object request's reference.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

Allow osd request ops that aren't otherwise structured (not class,
extent, or watch ops) to specify "raw" data to be used to hold
incoming data for the op.  Make use of this capability for the osd
STAT op.

Prefix the name of the private function osd_req_op_init() with "_",
and expose a new function by that (earlier) name whose purpose is to
initialize osd ops with (only) implied data.

For now we'll just support the use of a page array for an osd op
with incoming raw data.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

There are a bunch of functions defined to encapsulate getting the
address of a data field for a particular op in an osd request.
They're all defined the same way, so create a macro to take the
place of all of them.

Two of these are used outside the osd client code, so preserve them
(but convert them to use the new macro internally).  Stop exporting
the ones that aren't used elsewhere.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

In the incremental move toward supporting distinct data items in an
osd request some of the functions had "write_request" parameters to
indicate, basically, whether the data belonged to in_data or the
out_data.  Now that we maintain the data fields in the op structure
there is no need to indicate the direction, so get rid of the
"write_request" parameters.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

Fix printk format warnings by using %zd for 'ssize_t' variables:

fs/ceph/file.c:751:2: warning: format '%ld' expects argument of type 'long int', but argument 11 has type 'ssize_t' [-Wformat]
fs/ceph/file.c:762:2: warning: format '%ld' expects argument of type 'long int', but argument 11 has type 'ssize_t' [-Wformat]
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc:	ceph-devel@vger.kernel.org
Signed-off-by: Sage Weil <sage@inktank.com>

ceph_writepages_start() reads inode->i_size in two places. It can get
different values between successive read, because truncate can change
inode->i_size at any time. The race can lead to mismatch between data
length of osd request and pages marked as writeback. When osd request
finishes, it clear writeback page according to its data length. So
some pages can be left in writeback state forever. The fix is only
read inode->i_size once, save its value to a local variable and use
the local variable when i_size is needed.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Alex Elder <elder@inktank.com>

copy write checks in __generic_file_aio_write to ceph_aio_write.
To make these checks cover sync write path.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Alex Elder <elder@inktank.com>

There is deadlock as illustrated bellow. The fix is taking i_mutex
before getting Fw cap reference.

      write                    truncate                 MDS
---------------------     --------------------      --------------
get Fw cap
                          lock i_mutex
lock i_mutex (blocked)
                          request setattr.size  ->
                                                <-   revoke Fw cap
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>

An osd request currently has two callbacks.  They inform the
initiator of the request when we've received confirmation for the
target osd that a request was received, and when the osd indicates
all changes described by the request are durable.

The only time the second callback is used is in the ceph file system
for a synchronous write.  There's a race that makes some handling of
this case unsafe.  This patch addresses this problem.  The error
handling for this callback is also kind of gross, and this patch
changes that as well.

In ceph_sync_write(), if a safe callback is requested we want to add
the request on the ceph inode's unsafe items list.  Because items on
this list must have their tid set (by ceph_osd_start_request()), the
request added *after* the call to that function returns.  The
problem with this is that there's a race between starting the
request and adding it to the unsafe items list; the request may
already be complete before ceph_sync_write() even begins to put it
on the list.

To address this, we change the way the "safe" callback is used.
Rather than just calling it when the request is "safe", we use it to
notify the initiator the bounds (start and end) of the period during
which the request is *unsafe*.  So the initiator gets notified just
before the request gets sent to the osd (when it is "unsafe"), and
again when it's known the results are durable (it's no longer
unsafe).  The first call will get made in __send_request(), just
before the request message gets sent to the messenger for the first
time.  That function is only called by __send_queued(), which is
always called with the osd client's request mutex held.

We then have this callback function insert the request on the ceph
inode's unsafe list when we're told the request is unsafe.  This
will avoid the race because this call will be made under protection
of the osd client's request mutex.  It also nicely groups the setup
and cleanup of the state associated with managing unsafe requests.

The name of the "safe" callback field is changed to "unsafe" to
better reflect its new purpose.  It has a Boolean "unsafe" parameter
to indicate whether the request is becoming unsafe or is now safe.
Because the "msg" parameter wasn't used, we drop that.

This resolves the original problem reportedin:
    http://tracker.ceph.com/issues/4706Reported-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>

In ceph_sync_write(), if a safe callback is supplied with a request,
and an error is returned by ceph_osdc_wait_request(), a block of
code is executed to remove the request from the unsafe writes list
and drop references to capabilities acquired just prior to a call to
ceph_osdc_wait_request().

The only function used for this callback is sync_write_commit(),
and it does *exactly* what that block of error handling code does.

Now in ceph_osdc_wait_request(), if an error occurs (due to an
interupt during a wait_for_completion_interruptible() call),
complete_request() gets called, and that calls the request's
safe_callback method if it's defined.

So this means that this cleanup activity gets called twice in this
case, which is erroneous (and in fact leads to a crash).

Fix this by just letting the osd client handle the cleanup in
the event of an interrupt.

This resolves one problem mentioned in:
    http://tracker.ceph.com/issues/4706Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com>

add getattr/setattr and xattrs related methods.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Greg Farnum <greg@inktank.com>

We don't need to use up entropy to choose an mds,
so use prandom_u32() to get a pseudo-random number.

Also, we don't need to choose a random mds if only
one mds is available, so add special casing for the
common case.

Fixes http://tracker.ceph.com/issues/3579Signed-off-by: Sam Lang <sam.lang@inktank.com>
Reviewed-by: Greg Farnum <greg@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>

Implement layered read requests for format 2 rbd images.

If an rbd image is a clone of a snapshot, the snapshot will be the
clone's "parent" image.  When an object read request on a clone
comes back with ENOENT it indicates that the clone is not yet
populated with that portion of the image's data, and the parent
image should be consulted to satisfy the read.

When this occurs, a new image request is created, directed to the
parent image.  The offset and length of the image are the same as
the image-relative offset and length of the object request that
produced ENOENT.  Data from the parent image therefore satisfies the
object read request for the original image request.

While this code works, it will not be active until we enable the
layering feature (by adding RBD_FEATURE_LAYERING to the value of
RBD_FEATURES_SUPPORTED).
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

Call the probe function for the parent device if one is present.
Since we don't formally support the layering feature we won't
be using this functionality just yet.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

Add a flag to distinguish between object requests being done on
standalone objects and requests being sent for objects representing
rbd image data (i.e., object requests that are the result of image
request).
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

We're going to need some more Boolean values for object requests,
so create a flags bit field and use it to record whether the request
is done.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

Encapsulate the code that completes processing of an object request
that's part of an image request.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

Define a flag indicating whether an image request is for a layered
image (one with a parent image to which requests will be redirected
if the target object of a request does not exist).  The code that
checks this flag will be added shortly.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

Define a flag indicating whether an image request originated from
the Linux block layer (from blk_fetch_request()) or whether it was
initiated in order to satisfy an object request for a child image
of a layered rbd device.  For image requests initiated by objects of
child images we'll save a pointer to the object request rather than
the Linux block request.

For now, only block requests are used.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

There are several Boolean values we'll be maintaining for image
requests.  Switch from the single write_request field to a
general-purpose flags field, and use one if its bits to represent
the direction of I/O for the image request.  Define helper functions
for setting and testing that flag.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

For an image object request we will need to know what offset within
the rbd image the request covers.  Record that when the object
request gets created.

Update the I/O error warnings so they use this so what's reported
is more informative.

Rename a local variable to fit the convention used everywhere else.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

Compute the total number of bytes transferred for an image
request--the sum across each of the request's object requests.
To avoid contention do it only when all object requests are
complete, in rbd_img_request_complete().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

If any image object request produces a non-zero result, preserve
that as the result of the overall image request.  If multiple
objects have non-zero results, save only the first one.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

There is a new rbd feature bit defined for "fancy striping." Add
it to the ones defined in the kernel client.

Change RBD_FEATURES_ALL so it represents the set of all feature
bits (rather than just the ones we support).  Define a new symbol
RBD_FEATURES_SUPPORTED to indicate the supported ones.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

Right now the data for a method call is specified via a pointer and
length, and it's copied--along with the class and method name--into
a pagelist data item to be sent to the osd.  Instead, encode the
data in a data item separate from the class and method names.

This will allow large amounts of data to be supplied to methods
without copying.  Only rbd uses the class functionality right now,
and when it really needs this it will probably need to use a page
array rather than a page list.  But this simple implementation
demonstrates the functionality on the osd client, and that's enough
for now.

This resolves:
    http://tracker.ceph.com/issues/4104Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

Change the names of the functions that put data on a pagelist to
reflect that we're adding to whatever's already there rather than
just setting it to the one thing.  Currently only one data item is
ever added to a message, but that's about to change.

This resolves:
    http://tracker.ceph.com/issues/2770Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

This patch adds support to the messenger for more than one data item
in its data list.

A message data cursor has two more fields to support this:
    - a count of the number of bytes left to be consumed across
      all data items in the list, "total_resid"
    - a pointer to the head of the list (for validation only)

The cursor initialization routine has been split into two parts: the
outer one, which initializes the cursor for traversing the entire
list of data items; and the inner one, which initializes the cursor
to start processing a single data item.

When a message cursor is first initialized, the outer initialization
routine sets total_resid to the length provided.  The data pointer
is initialized to the first data item on the list.  From there, the
inner initialization routine finishes by setting up to process the
data item the cursor points to.

Advancing the cursor consumes bytes in total_resid.  If the resid
field reaches zero, it means the current data item is fully
consumed.  If total_resid indicates there is more data, the cursor
is advanced to point to the next data item, and then the inner
initialization routine prepares for using that.  (A check is made at
this point to make sure we don't wrap around the front of the list.)

The type-specific init routines are modified so they can be given a
length that's larger than what the data item can support.  The resid
field is initialized to the smaller of the provided length and the
length of the entire data item.

When total_resid reaches zero, we're done.

This resolves:
    http://tracker.ceph.com/issues/3761Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

In place of the message data pointer, use a list head which links
through message data items.  For now we only support a single entry
on that list.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

Rather than having a ceph message data item point to the cursor it's
associated with, have the cursor point to a data item.  This will
allow a message cursor to be used for more than one data item.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

A message will only be processing a single data item at a time, so
there's no need for each data item to have its own cursor.

Move the cursor embedded in the message data structure into the
message itself.  To minimize the impact, keep the data->cursor
field, but make it be a pointer to the cursor in the message.

Move the definition of ceph_msg_data above ceph_msg_data_cursor so
the cursor can point to the data without a forward definition rather
than vice-versa.

This and the upcoming patches are part of:
    http://tracker.ceph.com/issues/3761Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

The bio is the only data item type that doesn't record its full
length.  Fix that.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

We know the length of our message buffers.  If we get a message
that's too long, just dump it and ignore it.  If skip was set
then con->in_msg won't be valid, so be careful not to dereference
a null pointer in the process.

This resolves:
    http://tracker.ceph.com/issues/4664Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

This patch:
    15a0d7b libceph: record message data length
did not enclose some bio-specific code inside CONFIG_BLOCK as
it should have.  Fix that.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>