Merge tag 'asoc-fix-v6.1-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.1

Some more fixes for v6.1, some of these are very old and were originally
intended to get sent for v5.18 but got lost in the shuffle when there
was an issue with Linus not liking my branching strategy and I rebuilt
bits of my workflow.  The ops changes have been validated by people
looking at real hardware and are how things getting dropped got noticed.

For Lexicon I-ONIX FW810S, the call of ioctl(2) with
SNDRV_PCM_IOCTL_HW_PARAMS can returns -ETIMEDOUT. This is a regression due
to the commit 41319eb5 ("ALSA: dice: wait just for
NOTIFY_CLOCK_ACCEPTED after GLOBAL_CLOCK_SELECT operation"). The device
does not emit NOTIFY_CLOCK_ACCEPTED notification when accepting
GLOBAL_CLOCK_SELECT operation with the same parameters as current ones.

This commit fixes the regression. When receiving no notification, return
-ETIMEDOUT as long as operating for any change.

Fixes: 41319eb5 ("ALSA: dice: wait just for NOTIFY_CLOCK_ACCEPTED after GLOBAL_CLOCK_SELECT operation")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20221130130604.29774-1-o-takashi@sakamocchi.jpSigned-off-by: Takashi Iwai <tiwai@suse.de>

The table in the datasheet actually shows the volume values in the wrong
order, with the two -3dB values being reversed. This appears to have
caused the lower of the two values to be used in the driver when the
higher should have been, correct this mixup.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221125162348.1288005-2-ckeepax@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Currently the check against the max value for the control is being
applied after the value has had the minimum applied and been masked. But
the max value simply indicates the number of volume levels on an SX
control, and as such should just be applied on the raw value.

Fixes: 97eea946 ("ASoC: ops: Check bounds for second channel in snd_soc_put_volsw_sx()")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221125162348.1288005-1-ckeepax@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

These fixes were queued for v5.18 but due to me changing my scripting
they never actually got merged - pulling them up now.

Merge tag 'asoc-fix-v6.1-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.1

A clutch of small fixes that have come in in the past week, people seem
to have been unusually active for this late in the release cycle.  The
most critical one here is the fix to renumber the SOF DAI types in order
to restore ABI compatibility which was broken by the addition of AMD
support.

Add NULL check in dpcm_be_reparent API, to handle
kernel NULL pointer dereference error.
The issue occurred in fuzzing test.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Link: https://lore.kernel.org/r/1669098673-29703-1-git-send-email-quic_srivasam@quicinc.comSigned-off-by: Mark Brown <broonie@kernel.org>

With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed.

seq_copy_in_user() and seq_copy_in_kernel() did not have prototypes
matching snd_seq_dump_func_t. Adjust this and remove the casts. There
are not resulting binary output differences.

This was found as a result of Clang's new -Wcast-function-type-strict
flag, which is more sensitive than the simpler -Wcast-function-type,
which only checks for type width mismatches.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/202211041527.HD8TLSE1-lkp@intel.com
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: alsa-devel@alsa-project.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221118232346.never.380-kees@kernel.orgSigned-off-by: Takashi Iwai <tiwai@suse.de>

The addition of AMD_HS breaks Mediatek platforms by using an index
previously allocated to Mediatek. This is a backwards-compatibility
issue and needs to be fixed. All firmware released by AMD needs to be
re-generated and re-distributed.

Fixes: ed2562c6 ("ASoC: SOF: Adding amd HS functionality to the sof core")
Link: https://github.com/thesofproject/sof/issues/6615
Link: https://lore.kernel.org/alsa-devel/36a45c7a-820a-7675-d740-c0e83ae2c417@collabora.com/Reported-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Basavaraj Hiregoudar <basavaraj.hiregoudar@amd.com>
Reviewed-by: V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20221117232120.112639-1-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

As the devm_kcalloc may return NULL pointer,
it should be better to check the return value
in order to avoid NULL poineter dereference.

Fixes: 349dd239 ("ASoC: max98373: don't access volatile registers in bias level off")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20221116082508.17418-1-jiasheng@iscas.ac.cnSigned-off-by: Mark Brown <broonie@kernel.org>

Due to the hardware behavior, it takes some time for CBJ detection/impedance sensing/de-bounce.
The ClockStop_NotFinished flag will be raised until these functions are completed.
In ClockStopMode0 mode case, the SdW controller might check this flag from D3 to D0 when the
jack detection interrupt happened.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20221116090318.5017-1-shumingf@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>

Samsung Galaxy Book Pro 360 (13" 2021 NP930QBD-ke1US) with codec SSID
144d:c1a6 requires the same workaround for enabling the speaker amp
like other Samsung models with ALC298 codec.

Link: https://bugzilla.opensuse.org/show_bug.cgi?id=1205100
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221115170235.18875-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

The Samsung Galaxy Book Pro seems to have the same issue as a few
other Samsung laptops, detailed in kernel bug report 207423. Sound from
headphone jack works, but not the built-in speakers.

alsa-info: http://alsa-project.org/db/?f=b40ba609dc6ae28dc84ad404a0d8a4bbcd8bea6dSigned-off-by: Emil Flink <emil.flink@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221115144500.7782-1-emil.flink@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

snd_usbmidi_output_open() has a check of the NULL port with
snd_BUG_ON().  snd_BUG_ON() was used as this shouldn't have happened,
but in reality, the NULL port may be seen when the device gives an
invalid endpoint setup at the descriptor, hence the driver skips the
allocation.  That is, the check itself is valid and snd_BUG_ON()
should be dropped from there.  Otherwise it's confusing as if it were
a real bug, as recently syzbot stumbled on it.

Reported-by: syzbot+9abda841d636d86c41da@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/syzbot+9abda841d636d86c41da@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20221112141223.6144-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'asoc-fix-v6.2-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.1

A relatively large collection of fixes and new platform quirks here,
they're all fairly minor though - the widest possible impact is the fix
to the use of prefixes on regulator names which would have broken any
device that integrates regulators with DAPM and was used in a system
where it had a name prefix assigning to it.

The latest fix for the non-contiguous memalloc helper changed the
allocation method for a non-IOMMU system to use only the fallback
allocator.  This should have worked, but it caused a problem sometimes
when too many non-contiguous pages are allocated that can't be treated
by HD-audio controller.

As a quirk workaround, go back to the original strategy: use
dma_alloc_noncontiguous() at first, and apply the fallback only when
it fails, but only for non-IOMMU case.

We'll need a better fix in the fallback code as well, but this
workaround should paper over most cases.

Fixes: 9736a325 ("ALSA: memalloc: Don't fall back for SG-buffer with IOMMU")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/CAHk-=wgSH5ubdvt76gNwa004ooZAEJL_1Q-Fyw5M2FDdqL==dg@mail.gmail.com
Link: https://lore.kernel.org/r/20221112084718.3305-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

The DAI tx_mask and rx_mask are set by snd_soc_dai_set_tdm_slot()
and used by later code that depends on the TDM settings. So
__soc_pcm_open() should not be obliterating those mask values.

The code in __soc_pcm_hw_params() uses these masks to calculate the
active channels so that only the AIF_IN/AIF_OUT widgets for the
active TDM slots are enabled. The zeroing of the masks in
__soc_pcm_open() disables this functionality so all AIF widgets
were enabled even for channels that are not assigned to a TDM slot.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 2e5894d7 ("ASoC: pcm: Add support for DAI multicodec")
Link: https://lore.kernel.org/r/20221104132213.121847-1-rf@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Since commit bf2aebcc ("ASoC: sgtl5000: Fix noise on shutdown/remove"),
the device power control registers are reset when the driver is
removed/shutdown.

This is an issue when the device is configured to use the PLL clock. The
device will stop responding if it is still configured to use the PLL
clock but the PLL clock is powered down.

When rebooting linux, the probe function will show:
sgtl5000 0-000a: Error reading chip id -11

Make sure that the CHIP_CLK_CTRL is reset to its default value before
powering down the device.

Fixes: bf2aebcc ("ASoC: sgtl5000: Fix noise on shutdown/remove")
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20221110190612.1341469-1-detlev.casanova@collabora.comSigned-off-by: Mark Brown <broonie@kernel.org>

When KASAN is enabled, below log might be dumped with Intel EHL hardware:
[   48.583597] ==================================================================
[   48.585921] BUG: KASAN: slab-out-of-bounds in hdac_hda_dai_hw_params+0x20a/0x22b [snd_soc_hdac_hda]
[   48.587995] Write of size 4 at addr ffff888103489708 by task pulseaudio/759

[   48.589237] CPU: 2 PID: 759 Comm: pulseaudio Tainted: G     U      E     5.15.71-intel-ese-standard-lts #9
[   48.591272] Hardware name: Intel Corporation Elkhart Lake Embedded Platform/ElkhartLake LPDDR4x T3 CRB, BIOS EHLSFWI1.R00.4251.A01.2206130432 06/13/2022
[   48.593010] Call Trace:
[   48.593648]  <TASK>
[   48.593852]  dump_stack_lvl+0x34/0x48
[   48.594404]  print_address_description.constprop.0+0x1f/0x140
[   48.595174]  ? hdac_hda_dai_hw_params+0x20a/0x22b [snd_soc_hdac_hda]
[   48.595868]  ? hdac_hda_dai_hw_params+0x20a/0x22b [snd_soc_hdac_hda]
[   48.596519]  kasan_report.cold+0x7f/0x11b
[   48.597003]  ? hdac_hda_dai_hw_params+0x20a/0x22b [snd_soc_hdac_hda]
[   48.597885]  hdac_hda_dai_hw_params+0x20a/0x22b [snd_soc_hdac_hda]

HDAC_LAST_DAI_ID is last index id, pcm buffer array size should
be +1 to avoid out of bound access.

Fixes: 608b8c36 ("ASoC: hdac_hda: add support for HDMI/DP as a HDA codec")
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Junxiao Chang <junxiao.chang@intel.com>
Signed-off-by: Furong Zhou <furong.zhou@intel.com>
Link: https://lore.kernel.org/r/20221109234023.3111035-1-junxiao.chang@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The IRQF_ONESHOT flag allows to ensure that the interrupt is not
unmasked after the hard interrupt context handler has been executed
and the thread has been woken. The interrupt line is unmasked after
the thread handler function has been executed.

The STM32 I2S driver does not implement a threaded IRQ handler.
So, the IRQF_ONESHOT flag is not useful in I2S driver.
Remove this flag to allow the interrupt routine to be managed
as a thread in RT mode.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://lore.kernel.org/r/20221110084406.287117-1-olivier.moysan@foss.st.comSigned-off-by: Mark Brown <broonie@kernel.org>

As 'kobject_add' may allocated memory for 'kobject->name' when return error.
And in this function, if call 'kobject_add' failed didn't free kobject.
So call 'kobject_put' to recycling resources.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221110144539.2989354-1-yebin@huaweicloud.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

When the non-contiguous page allocation for SG buffer allocation
fails, the memalloc helper tries to fall back to the old page
allocation methods.  This would, however, result in the bogus page
addresses when IOMMU is enabled.  Usually in such a case, the fallback
allocation should fail as well, but occasionally it succeeds and
hitting a bad access.

The fallback was thought for non-IOMMU case, and as the error from
dma_alloc_noncontiguous() with IOMMU essentially implies a fatal
memory allocation error, we should return the error straightforwardly
without fallback.  This avoids the corner case like the above.

The patch also renames the local variable "dma_ops" with snd_ prefix
for avoiding the name conflict.

Fixes: a8d302a0 ("ALSA: memalloc: Revive x86-specific WC page allocations again")
Reported-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2211041541090.3532114@eliteleevi.tm.intel.com
Link: https://lore.kernel.org/r/20221110132216.30605-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

For Hamedal C20, the current rate is different from the runtime rate,
snd_usb_endpoint stop and close endpoint to resetting rate.
if snd_usb_endpoint close the endpoint, sometimes usb will
disconnect the device.
Signed-off-by: Ai Chao <aichao@kylinos.cn>
Link: https://lore.kernel.org/r/20221110063452.295110-1-aichao@kylinos.cnSigned-off-by: Takashi Iwai <tiwai@suse.de>

Positivo Master C6300 (1849:a233) require quirk for anabling headset-mic
Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221109171732.5417-1-edson.drosdeck@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

DSPCLK_DIV field in WM8962_CLOCKING1 register is used to generate
correct frequency of LRCLK and BCLK. Sometimes the read-only value
can't be updated timely after enabling SYSCLK. This results in wrong
calculation values. Delay is introduced here to wait for newest value
from register. The time of the delay should be at least 500~1000us
according to test.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221109121354.123958-1-chancel.liu@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

Ensure that resources allocated by iio_channel_get_all_cb()
are released on driver unbind.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://lore.kernel.org/r/20221109170849.273719-1-olivier.moysan@foss.st.comSigned-off-by: Mark Brown <broonie@kernel.org>

Accuphase DAC-60 option card supports native DSD up to DSD256,
but doesn't have support for auto-detection. Explicitly enable
DSD support for the correct altsetting.
Signed-off-by: Jussi Laako <jussi@sonarnerd.net>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221108221241.1220878-1-jussi@sonarnerd.netSigned-off-by: Takashi Iwai <tiwai@suse.de>

M-Audio Micro (0762:201a) defines the descriptor as vendor-specific,
while the content seems class-compliant.  Just overriding the probe
makes the device working.
Reported-by: Ash Logan <ash@heyquark.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/7ecd4417-d860-4773-c1c1-b07433342390@heyquark.com
Link: https://lore.kernel.org/r/20221108140721.24248-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

We are able to power down the GPU and audio via the GPU driver
so flag these asics as supporting runtime pm.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221108084746.583058-1-evan.quan@amd.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

The recent fix for the delayed card registration made the current
workaround for QUIRK_AUTODETECT superfluous, since the card
registration itself is delayed until the last interface probe.

This patch drops the redundant workaround in
create_autodetect_quirks() for simplification.

Fixes: 39efc9c8 ("ALSA: usb-audio: Fix last interface check for registration")
Link: https://bugzilla.suse.com/show_bug.cgi?id=1205111
Link: https://lore.kernel.org/r/20221108065824.14418-2-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Although we tried to fix the regression for the recent changes with
the delayed card registration, it doesn't seem covering the all
cases; e.g. on Roland EDIROL M-100FX, where the generic quirk for
Roland devices is applied, it misses the card registration because the
detection of the last interface (apparently for MIDI) fails.

This patch is an attempt to recover from those failures by calling the
card register also at the error path for the secondary interfaces.
The card register condition is also extended to match with the old
check in the previous patch, too (i.e. the simple check of the
interface number) for catching the probe with errors.

Fixes: 39efc9c8 ("ALSA: usb-audio: Fix last interface check for registration")
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.suse.com/show_bug.cgi?id=1205111
Link: https://lore.kernel.org/r/20221108065824.14418-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

The Speaker GPIO needs to be turned on slightly behind the codec turned on.
It also need to be turned off slightly before the codec turned down.
Current code uses delay in DAPM_EVENT to do it but the mdelay delays the
DAPM itself and thus has no effect. A delayed_work is added to turn on the
speaker.
The Speaker is turned off in .trigger since trigger is called slightly
before the DAPM events.
Signed-off-by: Zhu Ning <zhuning@everest-semi.com>

------------

v1: cancel delayed work while disabling speaker.
Link: https://lore.kernel.org/r/20221028020456.90286-1-zhuning0077@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Move the return value check before attempting to assign the core ID to the
swidget since we are going to fail the sof_widget_ready() and free up
swidget anyways.

Fixes: 909dadf2 ("ASoC: SOF: topology: Make DAI widget parsing IPC agnostic")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20221107090433.5146-1-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

snd_soc_util_exit() is called in __init snd_soc_init() for cleanup.
Remove the __exit annotation for it to fix the build warning:

WARNING: modpost: sound/soc/snd-soc-core.o: section mismatch in reference: init_module (section: .init.text) -> snd_soc_util_exit (section: .exit.text)

Fixes: 6ec27c53 ("ASoC: core: Fix use-after-free in snd_soc_exit()")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Link: https://lore.kernel.org/r/20221031134031.256511-1-chenzhongjin@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

The Z390 DARK mainboard uses a CA0132 audio controller. The quirk is
needed to enable surround sound and 3.5mm headphone jack handling in
the front audio connector as well as in the rear of the board when in
stereo mode.

Page 97 of the linked manual contains instructions to setup the
controller.
Signed-off-by: Xian Wang <dev@xianwang.io>
Cc: stable@vger.kernel.org
Link: https://www.evga.com/support/manuals/files/131-CS-E399.pdf
Link: https://lore.kernel.org/r/20221104202913.13904-1-dev@xianwang.ioSigned-off-by: Takashi Iwai <tiwai@suse.de>

Starting with 6.0-rc1 the CPU DAI is not registered and the sound
card is unavailable. Adding legacy_dai_naming causes it to function
properly again.

Fixes: fc34ece4 ("ASoC: Refactor non_legacy_dai_naming flag")
Signed-off-by: Jason Montleon <jmontleo@redhat.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221103144612.4431-2-jmontleo@redhat.comSigned-off-by: Mark Brown <broonie@kernel.org>

Starting with 6.0-rc1 these messages are logged and the sound card
is unavailable. Adding legacy_dai_naming to the rt5514-spi causes
it to function properly again.

[   16.928454] kbl_r5514_5663_max kbl_r5514_5663_max: ASoC: CPU DAI
spi-PRP0001:00 not registered
[   16.928561] platform kbl_r5514_5663_max: deferred probe pending

Fixes: fc34ece4 ("ASoC: Refactor non_legacy_dai_naming flag")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=216641Signed-off-by: Jason Montleon <jmontleo@redhat.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221103144612.4431-1-jmontleo@redhat.comSigned-off-by: Mark Brown <broonie@kernel.org>

Originally in commit b2ebcf42 ("ASoC: SOF: free widgets in
sof_tear_down_pipelines() for static pipelines"), freeing of pipeline
components at suspend was only done with recent FW as there were known
limitations in older firmware versions.

Tests show that if static pipelines are used, i.e. all pipelines are
setup whenever firmware is powered up, the reverse action of freeing all
components at power down, leads to firmware failures with also SOF2.0
and SOF2.1 based firmware.

The problems can be specific to certain topologies with e.g. components
not prepared to be freed at suspend (as this did not happen with older
SOF kernels).

To avoid hitting these problems when kernel is upgraded and used with an
older firmware, bump the firmware requirement to SOF2.2 or newer. If an
older firmware is used, and pipeline is a static one, do not free the
components at suspend. This ensures the suspend flow remains backwards
compatible with older firmware versions. This limitation does not apply
if the product configuration is updated to dynamic pipelines.

The limitation is not linked to firmware ABI, as the interface to free
pipeline components has been available already before ABI3.19. The
problem is in the implementation, so firmware version should be used to
decide whether it is safe to use the newer flow or not. This patch adds
a new SOF_FW_VER() macro to compare SOF firmware release versions.

Link: https://github.com/thesofproject/sof/issues/6475Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221101114913.1292671-1-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Yet another hardware variant we need to handle.

Link: https://github.com/thesofproject/linux/issues/3873Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20221031195639.250062-1-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The commit 1f9d3d98 ("ALSA: hda - set intel audio clock to a
proper value") added a number of misleading comments.

There is no ability to detect if an SCF value was set or not, what the
code does is prevent the use of the 6MHz audio clock represented by
the value 0 in LCTL.SCF. Changing the SCF settings does require the
link to be power-cycled, but in all other cases the link is powered
automatically when exiting reset. In other words, the power-cycle is
an exception to the rule that the HDaudio legacy driver does not need
to program SPA/CPA bits.

In addition, the SCF related changes are only relevant for the first
link.

No functionality change, only comment clarifications.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20221031195505.249929-1-pierre-louis.bossart@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>