- 13 Nov, 2020 7 commits
-
-
Arnd Bergmann authored
Merge tag 'sunxi-fixes-for-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes Mostly some fixes for a fallout in a PHY driver that pointed out errors in our DTs. Along with that, Jernej agreed to be a reviewer! * tag 'sunxi-fixes-for-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: h5: OrangePi Prime: Fix ethernet node arm64: dts: allwinner: a64: bananapi-m64: Enable RGMII RX/TX delay on PHY arm64: dts: allwinner: h5: libretech-all-h5-cc: Enable RGMII RX/TX delay on PHY ARM: dts: sunxi: bananapi-m2-plus: Enable RGMII RX/TX delay on Ethernet PHY ARM: dts: sun9i: Enable both RGMII RX/TX delay on Ethernet PHY ARM: dts: sun8i: a83t: Enable both RGMII RX/TX delay on Ethernet PHY ARM: dts: sun8i: h3: orangepi-plus2e: Enable RGMII RX/TX delay on Ethernet PHY ARM: dts: sun7i: bananapi-m1-plus: Enable RGMII RX/TX delay on Ethernet PHY ARM: dts: sun7i: cubietruck: Enable RGMII RX/TX delay on Ethernet PHY ARM: dts: sun6i: a31-hummingbird: Enable RGMII RX/TX delay on Ethernet PHY Revert "arm: sun8i: orangepi-pc-plus: Set EMAC activity LEDs to active high" ARM: dts: sun8i: r40: bananapi-m2-ultra: Fix ethernet node arm64: dts: allwinner: h5: OrangePi PC2: Fix ethernet node arm64: dts: allwinner: a64: Pine64 Plus: Fix ethernet node arm64: dts: allwinner: a64: OrangePi Win: Fix ethernet node arm64: dts: allwinner: Pine H64: Enable both RGMII RX/TX delay arm64: dts: allwinner: beelink-gs1: Enable both RGMII RX/TX delay arm64: dts: allwinner: pinetab: Drop unnecessary address/size-cells information MAINTAINERS: Add Jernej Škrabec as a reviewer for Allwinner SoCs support Link: https://lore.kernel.org/r/d1a1a6a6-fca4-4f1b-93b3-f2f6963b4e04.lettre@localhostSigned-off-by: Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
Merge tag 'stm32-dt-for-v5.10-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/fixes STM32 DT fixes for v5.10, round 2 Highlights: ----------- -Fixes are for DHCOM/DHCOR boards: - Fix TA3-GPIO-C button - Fix LED5 mapping - Define VIO regulator supply on DHCOM - Enable thermal sensor support on stm32mp15xx-dhcor - Keep VDDA LDO1 always on to avoid leakage * tag 'stm32-dt-for-v5.10-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: ARM: dts: stm32: Keep VDDA LDO1 always on on DHCOM ARM: dts: stm32: Enable thermal sensor support on stm32mp15xx-dhcor ARM: dts: stm32: Define VIO regulator supply on DHCOM ARM: dts: stm32: Fix LED5 on STM32MP1 DHCOM PDK2 ARM: dts: stm32: Fix TA3-GPIO-C key on STM32MP1 DHCOM PDK2 Link: https://lore.kernel.org/r/65bfc73d-aae1-5309-2e11-1e3da647ad46@st.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
Merge tag 'amdtee-fixes-for-5.10' of git://git.linaro.org:/people/jens.wiklander/linux-tee into arm/fixes AMD-TEE driver bug fixes AMD-TEE driver keeps track of shared memory buffers and their corresponding buffer id's in a global linked list. These buffers are used to share data between x86 and AMD Secure Processor. This pull request fixes issues related to maintaining mapped buffers in a shared linked list. * tag 'amdtee-fixes-for-5.10' of git://git.linaro.org:/people/jens.wiklander/linux-tee: tee: amdtee: synchronize access to shm list tee: amdtee: fix memory leak due to reset of global shm list Link: https://lore.kernel.org/r/20201109080809.GA3862873@jadeSigned-off-by: Arnd Bergmann <arnd@arndb.de>
-
Krzysztof Kozlowski authored
This reverts commit eaf2d2f6. The commit eaf2d2f6 ("ARM: dts: exynos: add input clock to CMU in Exynos4412 Odroid") breaks probing of usb3503 USB hub on Odroid U3. It changes the order of clock drivers probe: the clkout (Exynos PMU) driver is probed before the main clk-exynos4 driver. The clkout driver on Exynos4412 depends on clk-exynos4 but it does not support deferred probe, therefore this dependency and changed probe order causes probe failure. The usb3503 USB hub on Odroid U3 on the other hand requires clkout clock. This can be seen in logs: [ 5.007442] usb3503 0-0008: unable to request refclk (-517) Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200921174818.15525-1-krzk@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
Merge tag 'socfpga_fix_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/fixes arm64: dts: fix for v5.10 - Fix the qspi node to have the required "jedec,spi-nor" Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
Merge tag 'samsung-fixes-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/fixes Samsung changes for v5.10 Remove Kamil Debski, Kyungmin Park and Jeongtae Park from maintainers of several drivers. There were no maintenance activities from them for some time. While at touching credits, this also cleans up white spaces. * tag 'samsung-fixes-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: CREDITS: remove trailing white spaces MAINTAINERS: remove Jeongtae Park from Samsung MFC entry MAINTAINERS: move Kyungmin Park to credits MAINTAINERS: move Kamil Debski to credits Link: https://lore.kernel.org/r/20201031120237.8542-1-krzk@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
Merge tag 'imx-fixes-5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.10, 3rd round: - A series from Krzysztof Kozlowski to fix missing PMIC's interrupt line pull-up for i.MX8MM and i.MX8MN boards. - Set Bluetooth chip max-speed to 4000000 on imx8mm-beacon-som board to fix the choppy Bluetooth audio sound. - Remove non-existent OTG2, usbphynop2, and the usbmisc2 from i.MX8MN device tree. - Fix the endianness setting of RCPM node on Layerscape SoCs. - Add the missing dma-coherent property for qoriq-fman device to improve the performance. - Fix the Ethernet PHY address on imx6q-prti6q board. * tag 'imx-fixes-5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6q-prti6q: fix PHY address arm64: dts imx8mn: Remove non-existent USB OTG2 arm64: dts: imx8mm-beacon-som: Fix Choppy BT audio arm64: dts: fsl: DPAA FMan DMA operations are coherent arm64: dts: fsl: fix endianness issue of rcpm arm64: dts: imx8mn-evk: fix missing PMIC's interrupt line pull-up arm64: dts: imx8mn-ddr4-evk: fix missing PMIC's interrupt line pull-up arm64: dts: imx8mn-var-som: fix missing PMIC's interrupt line pull-up arm64: dts: imx8mm-evk: fix missing PMIC's interrupt line pull-up arm64: dts: imx8mm-beacon-som: fix missing PMIC's interrupt line pull-up arm64: dts: imx8mm-var-som: fix missing PMIC's interrupt line pull-up Link: https://lore.kernel.org/r/20201030151821.GA28266@dragonSigned-off-by: Arnd Bergmann <arnd@arndb.de>
-
- 09 Nov, 2020 8 commits
-
-
Marek Vasut authored
The VDDA LDO1 PMIC output supplies the analog VDDA input of the STM32MP1 on DHCOM, keep it always on, otherwise there could be leakage through the SoC. Fixes: 34e0c784 ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
-
Marek Vasut authored
Enable STM32 Digital Thermal Sensor driver for stm32mp15xx-dhcor SoMs. Fixes: 94cafe1b ("ARM: dts: stm32: Add Avenger96 devicetree support based on STM32MP157A") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
-
Marek Vasut authored
The VIO regulator is supplied by PMIC Buck3, describe this in the DT. Fixes: 34e0c784 ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
-
Marek Vasut authored
On the prototype DHCOM, the LED5 was connected to pin PG2 of the STM32MP15xx, however on the production SoM this was changed to pin PC6. Update the connection in the DT. Fixes: 81d5fc71 ("ARM: dts: stm32: Add GPIO LEDs for STM32MP1 DHCOM PDK2") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
-
Marek Vasut authored
On the prototype DHCOM, the TA3-GPIO-C button was connected to pin PI11 of the STM32MP15xx, however on the production SoM this was changed to pin PG0 to free up the IRQ line 11 for LAN8710i PHY IRQ. Update the connection in the DT. Since the IRQ line 0 is used for PMIC as well and cannot be shared with the button, make the button polled. Fixes: 87cabf94 ("ARM: dts: stm32: Add GPIO keys for STM32MP1 DHCOM PDK2") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
-
Rijo Thomas authored
Synchronize access to shm or shared memory buffer list to prevent race conditions due to concurrent updates to shared shm list by multiple threads. Fixes: 757cc3e9 ("tee: add AMD-TEE driver") Reviewed-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com> Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
-
Rijo Thomas authored
The driver maintains a list of shared memory buffers along with their mapped buffer id's in a global linked list. These buffers need to be unmapped after use by the user-space client. The global shared memory list is initialized to zero entries in the function amdtee_open(). This clearing of list entries can be a source for memory leak on secure side if the global linked list previously held some mapped buffer entries allocated from another TEE context. Fix potential memory leak issue by moving global shared memory list to AMD-TEE driver context data structure. Fixes: 757cc3e9 ("tee: add AMD-TEE driver") Reviewed-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com> Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
-
Linus Torvalds authored
-
- 08 Nov, 2020 13 commits
-
-
Linus Torvalds authored
Merge tag 'driver-core-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core documentation fixes from Greg KH: "Some small Documentation fixes that were fallout from the larger documentation update we did in 5.10-rc2. Nothing major here at all, but all of these have been in linux-next and resolve build warnings when building the documentation files" * tag 'driver-core-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: Documentation: remove mic/index from misc-devices/index.rst scripts: get_api.pl: Add sub-titles to ABI output scripts: get_abi.pl: Don't let ABI files to create subtitles docs: leds: index.rst: add a missing file docs: ABI: sysfs-class-net: fix a typo docs: ABI: sysfs-driver-dma-ioatdma: what starts with /sys
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial fixes from Greg KH: "Here are a small number of small tty and serial fixes for some reported problems for the tty core, vt code, and some serial drivers. They include fixes for: - a buggy and obsolete vt font ioctl removal - 8250_mtk serial baudrate runtime warnings - imx serial earlycon build configuration fix - txx9 serial driver error path cleanup issues - tty core fix in release_tty that can be triggered by trying to bind an invalid serial port name to a speakup console device Almost all of these have been in linux-next without any problems, the only one that hasn't, just deletes code :)" * tag 'tty-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: vt: Disable KD_FONT_OP_COPY tty: fix crash in release_tty if tty->port is not set serial: txx9: add missing platform_driver_unregister() on error in serial_txx9_init tty: serial: imx: enable earlycon by default if IMX_SERIAL_CONSOLE is enabled serial: 8250_mtk: Fix uart_get_baud_rate warning
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are some small USB fixes and new device ids: - USB gadget fixes for some reported issues - Fixes for the ever-troublesome apple fastcharge driver, hopefully we finally have it right. - More USB core quirks for odd devices - USB serial driver fixes for some long-standing issues that were recently found - some new USB serial driver device ids All have been in linux-next with no reported issues" * tag 'usb-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: apple-mfi-fastcharge: fix reference leak in apple_mfi_fc_set_property usb: mtu3: fix panic in mtu3_gadget_stop() USB: serial: option: add Telit FN980 composition 0x1055 USB: serial: option: add LE910Cx compositions 0x1203, 0x1230, 0x1231 USB: serial: cyberjack: fix write-URB completion race USB: Add NO_LPM quirk for Kingston flash drive USB: serial: option: add Quectel EC200T module support usb: raw-gadget: fix memory leak in gadget_setup usb: dwc2: Avoid leaving the error_debugfs label unused usb: dwc3: ep0: Fix delay status handling usb: gadget: fsl: fix null pointer checking usb: gadget: goku_udc: fix potential crashes in probe usb: dwc3: pci: add support for the Intel Alder Lake-S
-
Eddy Wu authored
current->group_leader->exit_signal may change during copy_process() if current->real_parent exits. Move the assignment inside tasklist_lock to avoid the race. Signed-off-by: Eddy Wu <eddy_wu@trendmicro.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Daniel Vetter authored
It's buggy: On Fri, Nov 06, 2020 at 10:30:08PM +0800, Minh Yuan wrote: > We recently discovered a slab-out-of-bounds read in fbcon in the latest > kernel ( v5.10-rc2 for now ). The root cause of this vulnerability is that > "fbcon_do_set_font" did not handle "vc->vc_font.data" and > "vc->vc_font.height" correctly, and the patch > <https://lkml.org/lkml/2020/9/27/223> for VT_RESIZEX can't handle this > issue. > > Specifically, we use KD_FONT_OP_SET to set a small font.data for tty6, and > use KD_FONT_OP_SET again to set a large font.height for tty1. After that, > we use KD_FONT_OP_COPY to assign tty6's vc_font.data to tty1's vc_font.data > in "fbcon_do_set_font", while tty1 retains the original larger > height. Obviously, this will cause an out-of-bounds read, because we can > access a smaller vc_font.data with a larger vc_font.height. Further there was only one user ever. - Android's loadfont, busybox and console-tools only ever use OP_GET and OP_SET - fbset documentation only mentions the kernel cmdline font: option, not anything else. - systemd used OP_COPY before release 232 published in Nov 2016 Now unfortunately the crucial report seems to have gone down with gmane, and the commit message doesn't say much. But the pull request hints at OP_COPY being broken https://github.com/systemd/systemd/pull/3651 So in other words, this never worked, and the only project which foolishly every tried to use it, realized that rather quickly too. Instead of trying to fix security issues here on dead code by adding missing checks, fix the entire thing by removing the functionality. Note that systemd code using the OP_COPY function ignored the return value, so it doesn't matter what we're doing here really - just in case a lone server somewhere happens to be extremely unlucky and running an affected old version of systemd. The relevant code from font_copy_to_all_vcs() in systemd was: /* copy font from active VT, where the font was uploaded to */ cfo.op = KD_FONT_OP_COPY; cfo.height = vcs.v_active-1; /* tty1 == index 0 */ (void) ioctl(vcfd, KDFONTOP, &cfo); Note this just disables the ioctl, garbage collecting the now unused callbacks is left for -next. v2: Tetsuo found the old mail, which allowed me to find it on another archive. Add the link too. Acked-by: Peilin Ye <yepeilin.cs@gmail.com> Reported-by: Minh Yuan <yuanmingbuaa@gmail.com> References: https://lists.freedesktop.org/archives/systemd-devel/2016-June/036935.html References: https://github.com/systemd/systemd/pull/3651 Cc: Greg KH <greg@kroah.com> Cc: Peilin Ye <yepeilin.cs@gmail.com> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://lore.kernel.org/r/20201108153806.3140315-1-daniel.vetter@ffwll.chSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fixes from Darrick Wong: - Fix an uninitialized struct problem - Fix an iomap problem zeroing unwritten EOF blocks - Fix some clumsy error handling when writeback fails on filesystems with blocksize < pagesize - Fix a retry loop not resetting loop variables properly - Fix scrub flagging rtinherit inodes on a non-rt fs, since the kernel actually does permit that combination - Fix excessive page cache flushing when unsharing part of a file * tag 'xfs-5.10-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: only flush the unshared range in xfs_reflink_unshare xfs: fix scrub flagging rtinherit even if there is no rt device xfs: fix missing CoW blocks writeback conversion retry iomap: clean up writeback state logic on writepage error iomap: support partial page discard on writeback block mapping failure xfs: flush new eof page on truncate to avoid post-eof corruption xfs: set xefi_discard when creating a deferred agfl free log intent item
-
Linus Torvalds authored
Merge procfs splice read fixes from Christoph Hellwig: "Greg reported a problem due to the fact that Android tests use procfs files to test splice, which stopped working with the changes for set_fs() removal. This series adds read_iter support for seq_file, and uses those for various proc files using seq_file to restore splice read support" [ Side note: Christoph initially had a scripted "move everything over" patch, which looks fine, but I personally would prefer us to actively discourage splice() on random files. So this does just the minimal basic core set of proc file op conversions. For completeness, and in case people care, that script was sed -i -e 's/\.proc_read\(\s*=\s*\)seq_read/\.proc_read_iter\1seq_read_iter/g' but I'll wait and see if somebody has a strong argument for using splice on random small /proc files before I'd run it on the whole kernel. - Linus ] * emailed patches from Christoph Hellwig <hch@lst.de>: proc "seq files": switch to ->read_iter proc "single files": switch to ->read_iter proc/stat: switch to ->read_iter proc/cpuinfo: switch to ->read_iter proc: wire up generic_file_splice_read for iter ops seq_file: add seq_read_iter
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "A set of x86 fixes: - Use SYM_FUNC_START_WEAK in the mem* ASM functions instead of a combination of .weak and SYM_FUNC_START_LOCAL which makes LLVMs integrated assembler upset - Correct the mitigation selection logic which prevented the related prctl to work correctly - Make the UV5 hubless system work correctly by fixing up the malformed table entries and adding the missing ones" * tag 'x86-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/platform/uv: Recognize UV5 hubless system identifier x86/platform/uv: Remove spaces from OEM IDs x86/platform/uv: Fix missing OEM_TABLE_ID x86/speculation: Allow IBPB to be conditionally enabled on CPUs with always-on STIBP x86/lib: Change .weak to SYM_FUNC_START_WEAK for arch/x86/lib/mem*_64.S
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fix from Thomas Gleixner: "A single fix for the perf core plugging a memory leak in the address filter parser" * tag 'perf-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Fix a memory leak in perf_event_parse_addr_filter()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull futex fix from Thomas Gleixner: "A single fix for the futex code where an intermediate state in the underlying RT mutex was not handled correctly and triggering a BUG() instead of treating it as another variant of retry condition" * tag 'locking-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: futex: Handle transient "ownerless" rtmutex state correctly
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Thomas Gleixner: "A set of fixes for interrupt chip drivers: - Fix the fallout of the IPI as interrupt conversion in Kconfig and the BCM2836 interrupt chip driver - Fixes for interrupt affinity setting and the handling of hierarchical irq domains in the SiFive PLIC driver - Make the unmapped event handling in the TI SCI driver work correctly - A few minor fixes and cleanups in various chip drivers and Kconfig" * tag 'irq-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: dt-bindings: irqchip: ti, sci-inta: Fix diagram indentation for unmapped events irqchip/ti-sci-inta: Add support for unmapped event handling dt-bindings: irqchip: ti, sci-inta: Update for unmapped event handling irqchip/renesas-intc-irqpin: Merge irlm_bit and needs_irlm irqchip/sifive-plic: Fix chip_data access within a hierarchy irqchip/sifive-plic: Fix broken irq_set_affinity() callback irqchip/stm32-exti: Add all LP timer exti direct events support irqchip/bcm2836: Fix missing __init annotation irqchip/mips: Drop selection of IRQ_DOMAIN_HIERARCHY irqchip/mst: Make mst_intc_of_init static irqchip/mst: MST_IRQ should depend on ARCH_MEDIATEK or ARCH_MSTARV7 genirq: Let GENERIC_IRQ_IPI select IRQ_DOMAIN_HIERARCHY
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull entry code fix from Thomas Gleixner: "A single fix for the generic entry code to correct the wrong assumption that the lockdep interrupt state needs not to be established before calling the RCU check" * tag 'core-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: entry: Fix the incorrect ordering of lockdep and RCU check
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - fix miscompilation with GCC 4.9 by using asm_goto_volatile for put_user() - fix for an RCU splat at boot caused by a recent lockdep change - fix for a possible deadlock in our EEH debugfs code - several fixes for handling of _PAGE_ACCESSED on 32-bit platforms - build fix when CONFIG_NUMA=n Thanks to Andreas Schwab, Christophe Leroy, Oliver O'Halloran, Qian Cai, and Scott Cheloha. * tag 'powerpc-5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/numa: Fix build when CONFIG_NUMA=n powerpc/8xx: Manage _PAGE_ACCESSED through APG bits in L1 entry powerpc/8xx: Always fault when _PAGE_ACCESSED is not set powerpc/40x: Always fault when _PAGE_ACCESSED is not set powerpc/603: Always fault when _PAGE_ACCESSED is not set powerpc: Use asm_goto_volatile for put_user() powerpc/smp: Call rcu_cpu_starting() earlier powerpc/eeh_cache: Fix a possible debugfs deadlock
-
- 07 Nov, 2020 10 commits
-
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: - NVMe pull request from Christoph: - revert a nvme_queue size optimization (Keith Bush) - fabrics timeout races fixes (Chao Leng and Sagi Grimberg)" - null_blk zone locking fix (Damien) * tag 'block-5.10-2020-11-07' of git://git.kernel.dk/linux-block: null_blk: Fix scheduling in atomic with zoned mode nvme-tcp: avoid repeated request completion nvme-rdma: avoid repeated request completion nvme-tcp: avoid race between time out and tear down nvme-rdma: avoid race between time out and tear down nvme: introduce nvme_sync_io_queues Revert "nvme-pci: remove last_sq_tail"
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: "A set of fixes for io_uring: - SQPOLL cancelation fixes - Two fixes for the io_identity COW - Cancelation overflow fix (Pavel) - Drain request cancelation fix (Pavel) - Link timeout race fix (Pavel)" * tag 'io_uring-5.10-2020-11-07' of git://git.kernel.dk/linux-block: io_uring: fix link lookup racing with link timeout io_uring: use correct pointer for io_uring_show_cred() io_uring: don't forget to task-cancel drained reqs io_uring: fix overflowed cancel w/ linked ->files io_uring: drop req/tctx io_identity separately io_uring: ensure consistent view of original task ->mm from SQPOLL io_uring: properly handle SQPOLL request cancelations io-wq: cancel request if it's asking for files and we don't have them
-
Mike Galbraith authored
Gratian managed to trigger the BUG_ON(!newowner) in fixup_pi_state_owner(). This is one possible chain of events leading to this: Task Prio Operation T1 120 lock(F) T2 120 lock(F) -> blocks (top waiter) T3 50 (RT) lock(F) -> boosts T1 and blocks (new top waiter) XX timeout/ -> wakes T2 signal T1 50 unlock(F) -> wakes T3 (rtmutex->owner == NULL, waiter bit is set) T2 120 cleanup -> try_to_take_mutex() fails because T3 is the top waiter and the lower priority T2 cannot steal the lock. -> fixup_pi_state_owner() sees newowner == NULL -> BUG_ON() The comment states that this is invalid and rt_mutex_real_owner() must return a non NULL owner when the trylock failed, but in case of a queued and woken up waiter rt_mutex_real_owner() == NULL is a valid transient state. The higher priority waiter has simply not yet managed to take over the rtmutex. The BUG_ON() is therefore wrong and this is just another retry condition in fixup_pi_state_owner(). Drop the locks, so that T3 can make progress, and then try the fixup again. Gratian provided a great analysis, traces and a reproducer. The analysis is to the point, but it confused the hell out of that tglx dude who had to page in all the futex horrors again. Condensed version is above. [ tglx: Wrote comment and changelog ] Fixes: c1e2f0ea ("futex: Avoid violating the 10th rule of futex") Reported-by: Gratian Crisan <gratian.crisan@ni.com> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/87a6w6x7bb.fsf@ni.com Link: https://lore.kernel.org/r/87sg9pkvf7.fsf@nanos.tec.linutronix.de
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "Driver bugfixes for I2C. Most of them are for the new mlxbf driver which got more exposure after rc1. The sh_mobile patch should already have reached you during the merge window, but I accidently dropped it. However, since it fixes a problem with rebooting, it is still fine for rc3" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: designware: slave should do WRITE_REQUESTED before WRITE_RECEIVED i2c: designware: call i2c_dw_read_clear_intrbits_slave() once i2c: mlxbf: I2C_MLXBF should depend on MELLANOX_PLATFORM i2c: mlxbf: Update author and maintainer email info i2c: mlxbf: Update reference clock frequency i2c: mlxbf: Remove unecessary wrapper functions i2c: mlxbf: Fix resrticted cast warning of sparse i2c: mlxbf: Add CONFIG_ACPI to guard ACPI function call i2c: sh_mobile: implement atomic transfers i2c: mediatek: move dma reset before i2c reset
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fixes from Palmer Dabbelt: - SPDX comment style fix - ignore memory that is unusable - avoid setting a kernel text offset for the !MMU kernels, where skipping the first page of memory is both unnecessary and costly - avoid passing the flag bits in satp to pfn_to_virt() - fix __put_kernel_nofault, where we had the arguments to __put_user_nocheck reversed - workaround for a bug in the FU540 to avoid triggering PMP issues during early boot - change to how we pull symbols out of the vDSO. The old mechanism was removed from binutils-2.35 (and has been backported to Debian's 2.34) * tag 'riscv-for-linus-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: RISC-V: Fix the VDSO symbol generaton for binutils-2.35+ RISC-V: Use non-PGD mappings for early DTB access riscv: uaccess: fix __put_kernel_nofault() riscv: fix pfn_to_virt err in do_page_fault(). riscv: Set text_offset correctly for M-Mode RISC-V: Remove any memblock representing unusable memory area risc-v: kernel: ftrace: Fixes improper SPDX comment style
-
Greg Kroah-Hartman authored
Merge tag 'usb-serial-5.10-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for 5.10-rc3 Here's a fix for a long-standing issue with the cyberjack driver and some new device ids. All have been in linux-next with no reported issues. * tag 'usb-serial-5.10-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: add Telit FN980 composition 0x1055 USB: serial: option: add LE910Cx compositions 0x1203, 0x1230, 0x1231 USB: serial: cyberjack: fix write-URB completion race USB: serial: option: add Quectel EC200T module support
-
kiyin(尹亮) authored
As shown through runtime testing, the "filename" allocation is not always freed in perf_event_parse_addr_filter(). There are three possible ways that this could happen: - It could be allocated twice on subsequent iterations through the loop, - or leaked on the success path, - or on the failure path. Clean up the code flow to make it obvious that 'filename' is always freed in the reallocation path and in the two return paths as well. We rely on the fact that kfree(NULL) is NOP and filename is initialized with NULL. This fixes the leak. No other side effects expected. [ Dan Carpenter: cleaned up the code flow & added a changelog. ] [ Ingo Molnar: updated the changelog some more. ] Fixes: 375637bc ("perf/core: Introduce address range filtering") Signed-off-by: "kiyin(尹亮)" <kiyin@tencent.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: "Srivatsa S. Bhat" <srivatsa@csail.mit.edu> Cc: Anthony Liguori <aliguori@amazon.com> -- kernel/events/core.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-)
-
Mike Travis authored
Testing shows a problem in that UV5 hubless systems were not being recognized. Add them to the list of OEM IDs checked. Fixes: 6c779442 ("Add UV5 direct references") Signed-off-by: Mike Travis <mike.travis@hpe.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20201105222741.157029-4-mike.travis@hpe.com
-
Mike Travis authored
Testing shows that trailing spaces caused problems with the OEM_ID and the OEM_TABLE_ID. One being that the OEM_ID would not string compare correctly. Another the OEM_ID and OEM_TABLE_ID would be concatenated in the printout. Remove any trailing spaces. Fixes: 1e61f5a9 ("Add and decode Arch Type in UVsystab") Signed-off-by: Mike Travis <mike.travis@hpe.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20201105222741.157029-3-mike.travis@hpe.com
-
Mike Travis authored
Testing shows a problem in that the OEM_TABLE_ID was missing for hubless systems. This is used to determine the APIC type (legacy or extended). Add the OEM_TABLE_ID to the early hubless processing. Fixes: 1e61f5a9 ("Add and decode Arch Type in UVsystab") Signed-off-by: Mike Travis <mike.travis@hpe.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20201105222741.157029-2-mike.travis@hpe.com
-
- 06 Nov, 2020 2 commits
-
-
git://github.com/ceph/ceph-clientLinus Torvalds authored
Pull ceph fix from Ilya Dryomov: "A fix for a potential stall on umount caused by the MDS dropping our REQUEST_CLOSE message. The code that handled this case was inadvertently disabled in 5.9, this patch removes it entirely and fixes the problem in a way that is consistent with ceph-fuse" * tag 'ceph-for-5.10-rc3' of git://github.com/ceph/ceph-client: ceph: check session state after bumping session->s_seq
-
Linus Torvalds authored
Merge tag 'linux-kselftest-fixes-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest fixes from Shuah Khan: "Fixes to the ftrace test and several fixes from Tommi Rantala for various other tests" * tag 'linux-kselftest-fixes-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: binderfs: use SKIP instead of XFAIL selftests: clone3: use SKIP instead of XFAIL selftests: core: use SKIP instead of XFAIL in close_range_test.c selftests: proc: fix warning: _GNU_SOURCE redefined selftests: pidfd: drop needless linux/kcmp.h inclusion in pidfd_setns_test.c selftests: pidfd: add CONFIG_CHECKPOINT_RESTORE=y to config selftests: pidfd: skip test on kcmp() ENOSYS selftests: pidfd: use ksft_test_result_skip() when skipping test selftests/harness: prettify SKIP message whitespace again selftests: pidfd: fix compilation errors due to wait.h selftests: filter kselftest headers from command in lib.mk selftests/ftrace: check for do_sys_openat2 in user-memory test selftests/ftrace: Use $FUNCTION_FORK to reference kernel fork function
-