- 11 Oct, 2011 1 commit
-
-
Dmitry Torokhov authored
This will ensure our reporting is consistent with the rest of the system and we do not refer to obsolete source file names. Reviewed-by:
Wanlong Gao <gaowanlong@cn.fujitsu.com> Reviewed-by:
JJ Ding <dgdunix@gmail.com> Reviewed-by:
Daniel Kurtz <djkurtz@chromium.org> Signed-off-by:
Dmitry Torokhov <dtor@mail.ru>
-
- 10 Oct, 2011 3 commits
-
-
Chris Bagwell authored
Medium size Bamboo P&T driver reused max X/Y form older Bamboo 1 medium size tablets and never updated to real value. Actual active area of tablet is slightly larger in Y direction. Signed-off-by:
Chris Bagwell <chris@cnpbagwell.com> Acked-by:
Ping Cheng <pingc@wacom.com> Signed-off-by:
-
Chris Bagwell authored
Tablet reports a distance of 0 right at highest point possible to be in proximity and distance_max when touching tablet. Inverse the distance since user land has no way of knowing ABS_DISTANCE is not distance from tablet. Signed-off-by:
-
Chris Bagwell authored
These were left in during removal of touch pressure reports but not needed now. Signed-off-by:
-
- 07 Oct, 2011 5 commits
-
-
Dmitry Torokhov authored
CONFIG_PM is defined when CONFIG_PM_SLEEP or CONFIG_PM_RUNTIME is defined, however suspend and resume methods are only valid in the context of CONFIG_PM_SLEEP. If only CONFIG_PM_RUNTIME is defined we get the following warning (courtesy of Geerts randconfig builds): lm8323.c: warning: 'lm8323_resume' defined but not used Signed-off-by: -
Dmitry Torokhov authored
CONFIG_PM is defined when CONFIG_PM_SLEEP or CONFIG_PM_RUNTIME is defined, however suspend and resume methods are only valid in the context of CONFIG_PM_SLEEP. If only CONFIG_PM_RUNTIME is defined we get the following warning (courtesy of Geerts randconfig builds): ad7879-i2c.c: warning: 'ad7879_i2c_resume' defined but not used Signed-off-by: -
Dmitry Torokhov authored
CONFIG_PM is defined when CONFIG_PM_SLEEP or CONFIG_PM_RUNTIME is defined, however suspend and resume methods are only valid in context of CONFIG_PM_SLEEP. If only CONFIG_PM_RUNTIME is defined we get the following warning (courtesy of Geerts randconfig builds): synaptics_i2c.c: warning: 'synaptics_i2c_resume' defined but not used Signed-off-by: -
Dmitry Torokhov authored
Sometimes GCC is not smart enough to recognize that x, y and z are always used properly initialized in mma8450_poll(). Let's rearrange the code a bit to help GCC. Signed-off-by: -
Daniel Kurtz authored
Sysfs attribute show methods are always passed a buffer of length PAGE_SIZE. To keep from overwriting this buffer and causing havoc, use snprintf() to guarantee we never write more than the buffer can hold. In addition, at least for my touchscreen, the number and size of objects was far too big to fit in a single 4K page. Therefore, this patch also trims some redundant framing text to leave more room for actual data. Signed-off-by:
Nick Dyer <nick.dyer@itdev.co.uk> Signed-off-by:
-
- 05 Oct, 2011 4 commits
-
-
Ping Cheng authored
Reviewed-by:
Eduard Hasenleithner <eduard@hasenleithner.at> Tested-by:
-
Ping Cheng authored
Cintiq 21ux2 has two sets of four LEDs on right and left side of the tablet, respectively. Reviewed-by:
-
Ping Cheng authored
The LED also indicates the status of the tablet. Don't turn it off. Reviewed-by:
-
Ping Cheng authored
The LED luminance level is normally lower when no button is pressed. Reviewed-by:
-
- 28 Sep, 2011 1 commit
-
-
Sebastian Andrzej Siewior authored
This patch adds the TSC-40 serial touchscreen driver and should be compatible with TSC-10 and TSC-25. The driver was written by Linutronix on behalf of Bachmann electronic GmbH. Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
Christian Gmeiner <christian.gmeiner@gmail.com> Signed-off-by:
-
- 21 Sep, 2011 10 commits
-
-
Michael Tandy authored
This patch clarifies a few bits of documentation in the header file for the adxl34x driver. Signed-off-by:
Michael Tandy <lkml@mkt.me.uk> Acked-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
-
Tobias Klauser authored
Use the of_property_read_u32() helper function to retrieve u32 values from the device tree. Also do not pass the len parameter to of_get_property if it isn't checked afterwards. Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Signed-off-by:
-
Dmitry Torokhov authored
Since touchscreen driver does not handle any events to be sent to the device we can close serio port first and then unregister the input device. Tested-by:
John Sung <penmount.touch@gmail.com> Signed-off-by:
-
Dmitry Torokhov authored
Instead of having one large switch based on product ID use pointer to function actually doing protocol decoding. Tested-by:
-
John Sung authored
Add multi touch support for PenMount 6250 touch controller. Signed-off-by:
-
John Sung authored
Add dual touch support for PenMount 3000 touch controller. Signed-off-by:
-
John Sung authored
Add support for PenMount 6000 touch controller. Signed-off-by:
-
John Sung authored
The MSB and LSB of the XY axis value are switched according to the PenMount 9000 protocol. The driver name is also changed from penmountlpc, since it is not for LPC interface at all. Signed-off-by:
-
JJ Ding authored
This essentially reverts commit f81bc788. With recent work on elantech driver, I believe we now have complete support for all elantech touchpads. So remove this hack. Signed-off-by:
JJ Ding <jj_ding@emc.com.tw> Reviewed-by:
Éric Piel <eric.piel@tremplin-utc.net> Signed-off-by:
-
JJ Ding authored
V2 hardware has many variants. This patch adddresses two issues: - some model also has debounce packets, but with a different signature than v3. Now we just check debounce for all v2 hardware. - due to different scanning methods the hardware uses, x and y ranges have to be calculated differently. And for some specific versions, we can just see them as custom-made, so set {x, y} the same values as Windows driver does. Signed-off-by:Richard Schütz <r.schtz@t-online.de> Reviewed-by:
-
- 09 Sep, 2011 11 commits
-
-
JJ Ding authored
v4 hardware is a true multitouch capable touchpad (up to 5 fingers). The packet format is quite complex, please see protocol document for reference. Signed-off-by:
-
JJ Ding authored
v3 hardware's packet format is almost identical to v2 (one/three finger touch), except when sensing two finger touch, the hardware sends 12 bytes of data. Signed-off-by:
-
JJ Ding authored
Group property setting code into elantech_set_properties. Signed-off-by:
-
JJ Ding authored
For v2 hardware, there is no real parity check, but we can still check some constant bits for data integrity. Also rename elantech_check_parity_v1 to elantech_packet_check_v1 to make these packet checking function names consistent. Signed-off-by:
-
JJ Ding authored
Don't try to be too clever and remove ETP_EDGE_FUZZ_V2. X, Y ranges should be just the raw resolution of the device. Otherwise, they can cause underflow on the Y axis. Suggested-by:
-
JJ Ding authored
With newer hardware, the touchpad provides range info. Let's use it. Signed-off-by:
-
JJ Ding authored
For two finger touches the coordinate of each finger gets reported separately but with reduced resolution. With this change, we now have the same range for ST and MT data and scale MT data because it has lower resolution to match ST. Suggested-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
JJ Ding authored
x, y values are actually 12-bit long. Also update protocol document to reflect the change. Signed-off-by:
-
Randy Dunlap authored
Fix warning from Geert's build summary emails by changing "if" to "ifdef". Thsi should fix the following: drivers/input/misc/twl6040-vibra.c:231:5: warning: "CONFIG_PM_SLEEP" is not defined Builds cleanly with CONFIG_PM_SLEEP enabled or disabled. Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
-
Dmitry Torokhov authored
Take spinlock when entering ISR and timer routine to ensure that we do not race while enabling/disabling FIFO interrupts. Also we do not need to take teh spinlock in tegra_kbc_startremove() since interrupt is completely disabled. Tested-by:
Rakesh Iyer <riyer@nvidia.com> Signed-off-by:
-
Rakesh Iyer authored
For wakeup to be reliable, kbc needs to be in interrupt mode before suspend. Created common routine to control the FIFO interrupt. Added synchronization to ensure orderly suspend. Signed-off-by:
-
- 08 Sep, 2011 1 commit
-
-
Harvey Yang authored
WARNING: drivers/input/keyboard/built-in.o(.text+0xb55b): Section mismatch in reference from the function tc3589x_keypad_open() to the function .devinit.text:tc3589x_keypad_init_key_hardware() The function tc3589x_keypad_open() references the function __devinit tc3589x_keypad_init_key_hardware(). This is often because tc3589x_keypad_open lacks a __devinit annotation or the annotation of tc3589x_keypad_init_key_hardware is wrong. Signed-off-by:
Harvey Yang <harvey.huawei.yang@gmail.com> Signed-off-by:
-
- 07 Sep, 2011 3 commits
-
-
Yong Zhang authored
This flag is a NOOP and can be removed now. Signed-off-by:
Yong Zhang <yong.zhang0@gmail.com> Signed-off-by:
-
Eduard Hasenleithner authored
This commit enables control of the LEDs and OLED displays found on the Wacom Intuos4 M, L, and XL. For this purpose, a new "wacom_led" attribute group is added to the sysfs entry of the USB device. This "wacom_led" group only shows up when the correct device (M, L, or XL) is detected. The attributes are described in Documentation/ABI/testing/sysfs-wacom Signed-off-by:
-
Dmitry Torokhov authored
-
- 29 Aug, 2011 1 commit
-
-
Linus Torvalds authored
-
