- 22 Mar, 2017 40 commits
-
-
Sabrina Dubroca authored
[ Upstream commit 67e19400 ] Commit 27596472 ("ipv6: fix ECMP route replacement") introduced a loop that removes all siblings of an ECMP route that is being replaced. However, this loop doesn't stop when it has replaced siblings, and keeps removing other routes with a higher metric. We also end up triggering the WARN_ON after the loop, because after this nsiblings < 0. Instead, stop the loop when we have taken care of all routes with the same metric as the route being replaced. Reproducer: =========== #!/bin/sh ip netns add ns1 ip netns add ns2 ip -net ns1 link set lo up for x in 0 1 2 ; do ip link add veth$x netns ns2 type veth peer name eth$x netns ns1 ip -net ns1 link set eth$x up ip -net ns2 link set veth$x up done ip -net ns1 -6 r a 2000::/64 nexthop via fe80::0 dev eth0 \ nexthop via fe80::1 dev eth1 nexthop via fe80::2 dev eth2 ip -net ns1 -6 r a 2000::/64 via fe80::42 dev eth0 metric 256 ip -net ns1 -6 r a 2000::/64 via fe80::43 dev eth0 metric 2048 echo "before replace, 3 routes" ip -net ns1 -6 r | grep -v '^fe80\|^ff00' echo ip -net ns1 -6 r c 2000::/64 nexthop via fe80::4 dev eth0 \ nexthop via fe80::5 dev eth1 nexthop via fe80::6 dev eth2 echo "after replace, only 2 routes, metric 2048 is gone" ip -net ns1 -6 r | grep -v '^fe80\|^ff00' Fixes: 27596472 ("ipv6: fix ECMP route replacement") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Acked-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by:
Xin Long <lucien.xin@gmail.com> Reviewed-by:
Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David Ahern authored
[ Upstream commit 79099aab ] Multipath routes can be rendered usesless when a device in one of the paths is deleted. For example: $ ip -f mpls ro ls 100 nexthop as to 200 via inet 172.16.2.2 dev virt12 nexthop as to 300 via inet 172.16.3.2 dev br0 101 nexthop as to 201 via inet6 2000:2::2 dev virt12 nexthop as to 301 via inet6 2000:3::2 dev br0 $ ip li del br0 When br0 is deleted the other hop is not considered in mpls_select_multipath because of the alive check -- rt_nhn_alive is 0. rt_nhn_alive is decremented once in mpls_ifdown when the device is taken down (NETDEV_DOWN) and again when it is deleted (NETDEV_UNREGISTER). For a 2 hop route, deleting one device drops the alive count to 0. Since devices are taken down before unregistering, the decrement on NETDEV_UNREGISTER is redundant. Fixes: c89359a4 ("mpls: support for dead routes") Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
-
David Ahern authored
[ Upstream commit e37791ec ] When the mpls_router module is unloaded, mpls routes are deleted but notifications are not sent to userspace leaving userspace caches out of sync. Add the call to mpls_notify_route in mpls_net_exit as routes are freed. Fixes: 0189197f ("mpls: Basic routing support") Signed-off-by:
-
Etienne Noss authored
[ Upstream commit 52491c76 ] tcf_connmark_init does not check in its configuration if TCA_CONNMARK_PARMS is set, resulting in a null pointer dereference when trying to access it. [501099.043007] BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 [501099.043039] IP: [<ffffffffc10c60fb>] tcf_connmark_init+0x8b/0x180 [act_connmark] ... [501099.044334] Call Trace: [501099.044345] [<ffffffffa47270e8>] ? tcf_action_init_1+0x198/0x1b0 [501099.044363] [<ffffffffa47271b0>] ? tcf_action_init+0xb0/0x120 [501099.044380] [<ffffffffa47250a4>] ? tcf_exts_validate+0xc4/0x110 [501099.044398] [<ffffffffc0f5fa97>] ? u32_set_parms+0xa7/0x270 [cls_u32] [501099.044417] [<ffffffffc0f60bf0>] ? u32_change+0x680/0x87b [cls_u32] [501099.044436] [<ffffffffa4725d1d>] ? tc_ctl_tfilter+0x4dd/0x8a0 [501099.044454] [<ffffffffa44a23a1>] ? security_capable+0x41/0x60 [501099.044471] [<ffffffffa470ca01>] ? rtnetlink_rcv_msg+0xe1/0x220 [501099.044490] [<ffffffffa470c920>] ? rtnl_newlink+0x870/0x870 [501099.044507] [<ffffffffa472cc61>] ? netlink_rcv_skb+0xa1/0xc0 [501099.044524] [<ffffffffa47073f4>] ? rtnetlink_rcv+0x24/0x30 [501099.044541] [<ffffffffa472c634>] ? netlink_unicast+0x184/0x230 [501099.044558] [<ffffffffa472c9d8>] ? netlink_sendmsg+0x2f8/0x3b0 [501099.044576] [<ffffffffa46d8880>] ? sock_sendmsg+0x30/0x40 [501099.044592] [<ffffffffa46d8e03>] ? SYSC_sendto+0xd3/0x150 [501099.044608] [<ffffffffa425fda1>] ? __do_page_fault+0x2d1/0x510 [501099.044626] [<ffffffffa47fbd7b>] ? system_call_fast_compare_end+0xc/0x9b Fixes: 22a5dc0e ("net: sched: Introduce connmark action") Signed-off-by:
Étienne Noss <etienne.noss@wifirst.fr> Signed-off-by:
Victorien Molle <victorien.molle@wifirst.fr> Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Lendacky, Thomas authored
[ Upstream commit d7aba644 ] Depending on the hardware, the amd-xgbe driver may use disable_irq_nosync() and enable_irq() when an interrupt is received to process Rx packets. If the napi_complete_done() return value isn't checked an unbalanced enable for the IRQ could result, generating a warning stack trace. Update the driver to only enable interrupts if napi_complete_done() returns true. Reported-by:
Jeremy Linton <jeremy.linton@arm.com> Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
-
Dmitry V. Levin authored
[ Upstream commit 745cb7f8 ] Replace MAX_ADDR_LEN with its numeric value to fix the following linux/packet_diag.h userspace compilation error: /usr/include/linux/packet_diag.h:67:17: error: 'MAX_ADDR_LEN' undeclared here (not in a function) __u8 pdmc_addr[MAX_ADDR_LEN]; This is not the first case in the UAPI where the numeric value of MAX_ADDR_LEN is used instead of symbolic one, uapi/linux/if_link.h already does the same: $ grep MAX_ADDR_LEN include/uapi/linux/if_link.h __u8 mac[32]; /* MAX_ADDR_LEN */ There are no UAPI headers besides these two that use MAX_ADDR_LEN. Signed-off-by:
Dmitry V. Levin <ldv@altlinux.org> Acked-by:
Pavel Emelyanov <xemul@virtuozzo.com> Signed-off-by:
-
Paolo Abeni authored
[ Upstream commit 294acf1c ] The gso code of several tunnels type (gre and udp tunnels) takes for granted that the skb->inner_protocol is properly initialized and drops the packet elsewhere. On the forwarding path no one is initializing such field, so gro encapsulated packets are dropped on forward. Since commit 38720352 ("gre: Use inner_proto to obtain inner header protocol"), this can be reproduced when the encapsulated packets use gre as the tunneling protocol. The issue happens also with vxlan and geneve tunnels since commit 8bce6d7d ("udp: Generalize skb_udp_segment"), if the forwarding host's ingress nic has h/w offload for such tunnel and a vxlan/geneve device is configured on top of it, regardless of the configured peer address and vni. To address the issue, this change initialize the inner_protocol field for encapsulated packets in both ipv4 and ipv6 gro complete callbacks. Fixes: 38720352 ("gre: Use inner_proto to obtain inner header protocol") Fixes: 8bce6d7d ("udp: Generalize skb_udp_segment") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Acked-by:
Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by:
-
David Ahern authored
[ Upstream commit f7887d40 ] KASAN detected a use-after-free: [ 269.467067] BUG: KASAN: use-after-free in vrf_xmit+0x7f1/0x827 [vrf] at addr ffff8800350a21c0 [ 269.467067] Read of size 4 by task ssh/1879 [ 269.467067] CPU: 1 PID: 1879 Comm: ssh Not tainted 4.10.0+ #249 [ 269.467067] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 269.467067] Call Trace: [ 269.467067] dump_stack+0x81/0xb6 [ 269.467067] kasan_object_err+0x21/0x78 [ 269.467067] kasan_report+0x2f7/0x450 [ 269.467067] ? vrf_xmit+0x7f1/0x827 [vrf] [ 269.467067] ? ip_output+0xa4/0xdb [ 269.467067] __asan_load4+0x6b/0x6d [ 269.467067] vrf_xmit+0x7f1/0x827 [vrf] ... Which corresponds to the skb access after xmit handling. Fix by saving skb->len and using the saved value to update stats. Fixes: 193125db ("net: Introduce VRF device driver") Signed-off-by:
-
Jarod Wilson authored
[ Upstream commit 3331aa37 ] This restores the ability to set a team device's mtu to anything higher than 1500. Similar to the reported issue with bonding, the team driver calls ether_setup(), which sets an initial max_mtu of 1500, while the underlying hardware can handle something much larger. Just set it to ETH_MAX_MTU to support all possible values, and the limitations of the underlying devices will prevent setting anything too large. Fixes: 91572088 ("net: use core MTU range checking in core net infra") CC: Cong Wang <xiyou.wangcong@gmail.com> CC: Jiri Pirko <jiri@resnulli.us> CC: netdev@vger.kernel.org Signed-off-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 62f8f4d9 ] Dmitry reported crashes in DCCP stack [1] Problem here is that when I got rid of listener spinlock, I missed the fact that DCCP stores a complex state in struct dccp_request_sock, while TCP does not. Since multiple cpus could access it at the same time, we need to add protection. [1] BUG: KASAN: use-after-free in dccp_feat_activate_values+0x967/0xab0 net/dccp/feat.c:1541 at addr ffff88003713be68 Read of size 8 by task syz-executor2/8457 CPU: 2 PID: 8457 Comm: syz-executor2 Not tainted 4.10.0-rc7+ #127 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:15 [inline] dump_stack+0x292/0x398 lib/dump_stack.c:51 kasan_object_err+0x1c/0x70 mm/kasan/report.c:162 print_address_description mm/kasan/report.c:200 [inline] kasan_report_error mm/kasan/report.c:289 [inline] kasan_report.part.1+0x20e/0x4e0 mm/kasan/report.c:311 kasan_report mm/kasan/report.c:332 [inline] __asan_report_load8_noabort+0x29/0x30 mm/kasan/report.c:332 dccp_feat_activate_values+0x967/0xab0 net/dccp/feat.c:1541 dccp_create_openreq_child+0x464/0x610 net/dccp/minisocks.c:121 dccp_v6_request_recv_sock+0x1f6/0x1960 net/dccp/ipv6.c:457 dccp_check_req+0x335/0x5a0 net/dccp/minisocks.c:186 dccp_v6_rcv+0x69e/0x1d00 net/dccp/ipv6.c:711 ip6_input_finish+0x46d/0x17a0 net/ipv6/ip6_input.c:279 NF_HOOK include/linux/netfilter.h:257 [inline] ip6_input+0xdb/0x590 net/ipv6/ip6_input.c:322 dst_input include/net/dst.h:507 [inline] ip6_rcv_finish+0x289/0x890 net/ipv6/ip6_input.c:69 NF_HOOK include/linux/netfilter.h:257 [inline] ipv6_rcv+0x12ec/0x23d0 net/ipv6/ip6_input.c:203 __netif_receive_skb_core+0x1ae5/0x3400 net/core/dev.c:4190 __netif_receive_skb+0x2a/0x170 net/core/dev.c:4228 process_backlog+0xe5/0x6c0 net/core/dev.c:4839 napi_poll net/core/dev.c:5202 [inline] net_rx_action+0xe70/0x1900 net/core/dev.c:5267 __do_softirq+0x2fb/0xb7d kernel/softirq.c:284 do_softirq_own_stack+0x1c/0x30 arch/x86/entry/entry_64.S:902 </IRQ> do_softirq.part.17+0x1e8/0x230 kernel/softirq.c:328 do_softirq kernel/softirq.c:176 [inline] __local_bh_enable_ip+0x1f2/0x200 kernel/softirq.c:181 local_bh_enable include/linux/bottom_half.h:31 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:971 [inline] ip6_finish_output2+0xbb0/0x23d0 net/ipv6/ip6_output.c:123 ip6_finish_output+0x302/0x960 net/ipv6/ip6_output.c:148 NF_HOOK_COND include/linux/netfilter.h:246 [inline] ip6_output+0x1cb/0x8d0 net/ipv6/ip6_output.c:162 ip6_xmit+0xcdf/0x20d0 include/net/dst.h:501 inet6_csk_xmit+0x320/0x5f0 net/ipv6/inet6_connection_sock.c:179 dccp_transmit_skb+0xb09/0x1120 net/dccp/output.c:141 dccp_xmit_packet+0x215/0x760 net/dccp/output.c:280 dccp_write_xmit+0x168/0x1d0 net/dccp/output.c:362 dccp_sendmsg+0x79c/0xb10 net/dccp/proto.c:796 inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:744 sock_sendmsg_nosec net/socket.c:635 [inline] sock_sendmsg+0xca/0x110 net/socket.c:645 SYSC_sendto+0x660/0x810 net/socket.c:1687 SyS_sendto+0x40/0x50 net/socket.c:1655 entry_SYSCALL_64_fastpath+0x1f/0xc2 RIP: 0033:0x4458b9 RSP: 002b:00007f8ceb77bb58 EFLAGS: 00000282 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000000017 RCX: 00000000004458b9 RDX: 0000000000000023 RSI: 0000000020e60000 RDI: 0000000000000017 RBP: 00000000006e1b90 R08: 00000000200f9fe1 R09: 0000000000000020 R10: 0000000000008010 R11: 0000000000000282 R12: 00000000007080a8 R13: 0000000000000000 R14: 00007f8ceb77c9c0 R15: 00007f8ceb77c700 Object at ffff88003713be50, in cache kmalloc-64 size: 64 Allocated: PID = 8446 save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:57 save_stack+0x43/0xd0 mm/kasan/kasan.c:502 set_track mm/kasan/kasan.c:514 [inline] kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:605 kmem_cache_alloc_trace+0x82/0x270 mm/slub.c:2738 kmalloc include/linux/slab.h:490 [inline] dccp_feat_entry_new+0x214/0x410 net/dccp/feat.c:467 dccp_feat_push_change+0x38/0x220 net/dccp/feat.c:487 __feat_register_sp+0x223/0x2f0 net/dccp/feat.c:741 dccp_feat_propagate_ccid+0x22b/0x2b0 net/dccp/feat.c:949 dccp_feat_server_ccid_dependencies+0x1b3/0x250 net/dccp/feat.c:1012 dccp_make_response+0x1f1/0xc90 net/dccp/output.c:423 dccp_v6_send_response+0x4ec/0xc20 net/dccp/ipv6.c:217 dccp_v6_conn_request+0xaba/0x11b0 net/dccp/ipv6.c:377 dccp_rcv_state_process+0x51e/0x1650 net/dccp/input.c:606 dccp_v6_do_rcv+0x213/0x350 net/dccp/ipv6.c:632 sk_backlog_rcv include/net/sock.h:893 [inline] __sk_receive_skb+0x36f/0xcc0 net/core/sock.c:479 dccp_v6_rcv+0xba5/0x1d00 net/dccp/ipv6.c:742 ip6_input_finish+0x46d/0x17a0 net/ipv6/ip6_input.c:279 NF_HOOK include/linux/netfilter.h:257 [inline] ip6_input+0xdb/0x590 net/ipv6/ip6_input.c:322 dst_input include/net/dst.h:507 [inline] ip6_rcv_finish+0x289/0x890 net/ipv6/ip6_input.c:69 NF_HOOK include/linux/netfilter.h:257 [inline] ipv6_rcv+0x12ec/0x23d0 net/ipv6/ip6_input.c:203 __netif_receive_skb_core+0x1ae5/0x3400 net/core/dev.c:4190 __netif_receive_skb+0x2a/0x170 net/core/dev.c:4228 process_backlog+0xe5/0x6c0 net/core/dev.c:4839 napi_poll net/core/dev.c:5202 [inline] net_rx_action+0xe70/0x1900 net/core/dev.c:5267 __do_softirq+0x2fb/0xb7d kernel/softirq.c:284 Freed: PID = 15 save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:57 save_stack+0x43/0xd0 mm/kasan/kasan.c:502 set_track mm/kasan/kasan.c:514 [inline] kasan_slab_free+0x73/0xc0 mm/kasan/kasan.c:578 slab_free_hook mm/slub.c:1355 [inline] slab_free_freelist_hook mm/slub.c:1377 [inline] slab_free mm/slub.c:2954 [inline] kfree+0xe8/0x2b0 mm/slub.c:3874 dccp_feat_entry_destructor.part.4+0x48/0x60 net/dccp/feat.c:418 dccp_feat_entry_destructor net/dccp/feat.c:416 [inline] dccp_feat_list_pop net/dccp/feat.c:541 [inline] dccp_feat_activate_values+0x57f/0xab0 net/dccp/feat.c:1543 dccp_create_openreq_child+0x464/0x610 net/dccp/minisocks.c:121 dccp_v6_request_recv_sock+0x1f6/0x1960 net/dccp/ipv6.c:457 dccp_check_req+0x335/0x5a0 net/dccp/minisocks.c:186 dccp_v6_rcv+0x69e/0x1d00 net/dccp/ipv6.c:711 ip6_input_finish+0x46d/0x17a0 net/ipv6/ip6_input.c:279 NF_HOOK include/linux/netfilter.h:257 [inline] ip6_input+0xdb/0x590 net/ipv6/ip6_input.c:322 dst_input include/net/dst.h:507 [inline] ip6_rcv_finish+0x289/0x890 net/ipv6/ip6_input.c:69 NF_HOOK include/linux/netfilter.h:257 [inline] ipv6_rcv+0x12ec/0x23d0 net/ipv6/ip6_input.c:203 __netif_receive_skb_core+0x1ae5/0x3400 net/core/dev.c:4190 __netif_receive_skb+0x2a/0x170 net/core/dev.c:4228 process_backlog+0xe5/0x6c0 net/core/dev.c:4839 napi_poll net/core/dev.c:5202 [inline] net_rx_action+0xe70/0x1900 net/core/dev.c:5267 __do_softirq+0x2fb/0xb7d kernel/softirq.c:284 Memory state around the buggy address: ffff88003713bd00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88003713bd80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff88003713be00: fc fc fc fc fc fc fc fc fc fc fb fb fb fb fb fb ^ Fixes: 079096f1 ("tcp/dccp: install syn_recv requests into ehash table") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Dmitry Vyukov <dvyukov@google.com> Tested-by:
-
Alexey Khoroshilov authored
[ Upstream commit 6c4dc75c ] Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 9ac25fc0 ] TX skbs do not necessarily hold a reference on skb->sk->sk_refcnt By the time TX completion happens, sk_refcnt might be already 0. sock_hold()/sock_put() would then corrupt critical state, like sk_wmem_alloc and lead to leaks or use after free. Fixes: 62bccb8c ("net-timestamp: Make the clone operation stand-alone from phy timestamping") Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit dd4f1072 ] TX skbs do not necessarily hold a reference on skb->sk->sk_refcnt By the time TX completion happens, sk_refcnt might be already 0. sock_hold()/sock_put() would then corrupt critical state, like sk_wmem_alloc. Fixes: bf7fa551 ("mac80211: Resolve sk_refcnt/sk_wmem_alloc issue in wifi ack path") Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 02b2faaf ] Dmitry Vyukov reported a divide by 0 triggered by syzkaller, exploiting tcp_disconnect() path that was never really considered and/or used before syzkaller ;) I was not able to reproduce the bug, but it seems issues here are the three possible actions that assumed they would never trigger on a listener. 1) tcp_write_timer_handler 2) tcp_delack_timer_handler 3) MTU reduction Only IPv6 MTU reduction was properly testing TCP_CLOSE and TCP_LISTEN states from tcp_v6_mtu_reduced() Signed-off-by:
-
WANG Cong authored
[ Upstream commit f78ef7cd ] Fixes: 43a0c675 ("strparser: Stream parser for messages") Cc: Tom Herbert <tom@herbertland.com> Signed-off-by:
-
WANG Cong authored
[ Upstream commit 31c05415 ] This restores the ability of setting bond device's mtu to 9000. Fixes: 91572088 ("net: use core MTU range checking in core net infra") Reported-by: daznis@gmail.com Reported-by:
Brad Campbell <lists2009@fnarfbargle.com> Cc: Jarod Wilson <jarod@redhat.com> Signed-off-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by:
-
Lendacky, Thomas authored
[ Upstream commit 2697ea5a ] If an SFP module is not present, xgbe_phy_sfp_phy_settings() should return after applying the default settings. Currently there is no return statement and the default settings are overwritten. Signed-off-by:
-
Lendacky, Thomas authored
[ Upstream commit b42c6761 ] The MDIO register mode is set when the device is probed. But when the device is brought down and then back up, the MDIO register mode has been reset. Be sure to reset the mode during device startup and only change the mode of the address specified. Signed-off-by:
-
Lendacky, Thomas authored
[ Upstream commit 402168b4 ] Some configurations require the use of the hardware's MDIO support to communicate with external PHYs. The MDIO commands indicate completion through the device interrupt. When bringing down the device the interrupts were released before stopping the external PHY, resulting in MDIO command timeouts. Move the stopping of the PHY to before the releasing of the interrupts. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
[ Upstream commit d5afb6f9 ] The code where sk_clone() came from created a new socket and locked it, but then, on the error path didn't unlock it. This problem stayed there for a long while, till b0691c8e ("net: Unlock sock before calling sk_free()") fixed it, but unfortunately the callers of sk_clone() (now sk_clone_locked()) were not audited and the one in dccp_create_openreq_child() remained. Now in the age of the syskaller fuzzer, this was finally uncovered, as reported by Dmitry: ---- 8< ---- I've got the following report while running syzkaller fuzzer on 86292b33 ("Merge branch 'akpm' (patches from Andrew)") [ BUG: held lock freed! ] 4.10.0+ #234 Not tainted ------------------------- syz-executor6/6898 is freeing memory ffff88006286cac0-ffff88006286d3b7, with a lock still held there! (slock-AF_INET6){+.-...}, at: [<ffffffff8362c2c9>] spin_lock include/linux/spinlock.h:299 [inline] (slock-AF_INET6){+.-...}, at: [<ffffffff8362c2c9>] sk_clone_lock+0x3d9/0x12c0 net/core/sock.c:1504 5 locks held by syz-executor6/6898: #0: (sk_lock-AF_INET6){+.+.+.}, at: [<ffffffff839a34b4>] lock_sock include/net/sock.h:1460 [inline] #0: (sk_lock-AF_INET6){+.+.+.}, at: [<ffffffff839a34b4>] inet_stream_connect+0x44/0xa0 net/ipv4/af_inet.c:681 #1: (rcu_read_lock){......}, at: [<ffffffff83bc1c2a>] inet6_csk_xmit+0x12a/0x5d0 net/ipv6/inet6_connection_sock.c:126 #2: (rcu_read_lock){......}, at: [<ffffffff8369b424>] __skb_unlink include/linux/skbuff.h:1767 [inline] #2: (rcu_read_lock){......}, at: [<ffffffff8369b424>] __skb_dequeue include/linux/skbuff.h:1783 [inline] #2: (rcu_read_lock){......}, at: [<ffffffff8369b424>] process_backlog+0x264/0x730 net/core/dev.c:4835 #3: (rcu_read_lock){......}, at: [<ffffffff83aeb5c0>] ip6_input_finish+0x0/0x1700 net/ipv6/ip6_input.c:59 #4: (slock-AF_INET6){+.-...}, at: [<ffffffff8362c2c9>] spin_lock include/linux/spinlock.h:299 [inline] #4: (slock-AF_INET6){+.-...}, at: [<ffffffff8362c2c9>] sk_clone_lock+0x3d9/0x12c0 net/core/sock.c:1504 Fix it just like was done by b0691c8e ("net: Unlock sock before calling sk_free()"). Reported-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 48cac18e ] Andrey reported a use-after-free in IPv6 stack. Issue here is that we free the socket while it still has skb in TX path and in some queues. It happens here because IPv6 reassembly unit messes skb->truesize, breaking skb_set_owner_w() badly. We fixed a similar issue for IPV4 in commit 8282f274 ("inet: frag: Always orphan skbs inside ip_defrag()") Acked-by:
Joe Stringer <joe@ovn.org> ================================================================== BUG: KASAN: use-after-free in sock_wfree+0x118/0x120 Read of size 8 at addr ffff880062da0060 by task a.out/4140 page:ffffea00018b6800 count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0 flags: 0x100000000008100(slab|head) raw: 0100000000008100 0000000000000000 0000000000000000 0000000180130013 raw: dead000000000100 dead000000000200 ffff88006741f140 0000000000000000 page dumped because: kasan: bad access detected CPU: 0 PID: 4140 Comm: a.out Not tainted 4.10.0-rc3+ #59 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:15 dump_stack+0x292/0x398 lib/dump_stack.c:51 describe_address mm/kasan/report.c:262 kasan_report_error+0x121/0x560 mm/kasan/report.c:370 kasan_report mm/kasan/report.c:392 __asan_report_load8_noabort+0x3e/0x40 mm/kasan/report.c:413 sock_flag ./arch/x86/include/asm/bitops.h:324 sock_wfree+0x118/0x120 net/core/sock.c:1631 skb_release_head_state+0xfc/0x250 net/core/skbuff.c:655 skb_release_all+0x15/0x60 net/core/skbuff.c:668 __kfree_skb+0x15/0x20 net/core/skbuff.c:684 kfree_skb+0x16e/0x4e0 net/core/skbuff.c:705 inet_frag_destroy+0x121/0x290 net/ipv4/inet_fragment.c:304 inet_frag_put ./include/net/inet_frag.h:133 nf_ct_frag6_gather+0x1125/0x38b0 net/ipv6/netfilter/nf_conntrack_reasm.c:617 ipv6_defrag+0x21b/0x350 net/ipv6/netfilter/nf_defrag_ipv6_hooks.c:68 nf_hook_entry_hookfn ./include/linux/netfilter.h:102 nf_hook_slow+0xc3/0x290 net/netfilter/core.c:310 nf_hook ./include/linux/netfilter.h:212 __ip6_local_out+0x52c/0xaf0 net/ipv6/output_core.c:160 ip6_local_out+0x2d/0x170 net/ipv6/output_core.c:170 ip6_send_skb+0xa1/0x340 net/ipv6/ip6_output.c:1722 ip6_push_pending_frames+0xb3/0xe0 net/ipv6/ip6_output.c:1742 rawv6_push_pending_frames net/ipv6/raw.c:613 rawv6_sendmsg+0x2cff/0x4130 net/ipv6/raw.c:927 inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:744 sock_sendmsg_nosec net/socket.c:635 sock_sendmsg+0xca/0x110 net/socket.c:645 sock_write_iter+0x326/0x620 net/socket.c:848 new_sync_write fs/read_write.c:499 __vfs_write+0x483/0x760 fs/read_write.c:512 vfs_write+0x187/0x530 fs/read_write.c:560 SYSC_write fs/read_write.c:607 SyS_write+0xfb/0x230 fs/read_write.c:599 entry_SYSCALL_64_fastpath+0x1f/0xc2 arch/x86/entry/entry_64.S:203 RIP: 0033:0x7ff26e6f5b79 RSP: 002b:00007ff268e0ed98 EFLAGS: 00000206 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007ff268e0f9c0 RCX: 00007ff26e6f5b79 RDX: 0000000000000010 RSI: 0000000020f50fe1 RDI: 0000000000000003 RBP: 00007ff26ebc1220 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000206 R12: 0000000000000000 R13: 00007ff268e0f9c0 R14: 00007ff26efec040 R15: 0000000000000003 The buggy address belongs to the object at ffff880062da0000 which belongs to the cache RAWv6 of size 1504 The buggy address ffff880062da0060 is located 96 bytes inside of 1504-byte region [ffff880062da0000, ffff880062da05e0) Freed by task 4113: save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:57 save_stack+0x43/0xd0 mm/kasan/kasan.c:502 set_track mm/kasan/kasan.c:514 kasan_slab_free+0x73/0xc0 mm/kasan/kasan.c:578 slab_free_hook mm/slub.c:1352 slab_free_freelist_hook mm/slub.c:1374 slab_free mm/slub.c:2951 kmem_cache_free+0xb2/0x2c0 mm/slub.c:2973 sk_prot_free net/core/sock.c:1377 __sk_destruct+0x49c/0x6e0 net/core/sock.c:1452 sk_destruct+0x47/0x80 net/core/sock.c:1460 __sk_free+0x57/0x230 net/core/sock.c:1468 sk_free+0x23/0x30 net/core/sock.c:1479 sock_put ./include/net/sock.h:1638 sk_common_release+0x31e/0x4e0 net/core/sock.c:2782 rawv6_close+0x54/0x80 net/ipv6/raw.c:1214 inet_release+0xed/0x1c0 net/ipv4/af_inet.c:425 inet6_release+0x50/0x70 net/ipv6/af_inet6.c:431 sock_release+0x8d/0x1e0 net/socket.c:599 sock_close+0x16/0x20 net/socket.c:1063 __fput+0x332/0x7f0 fs/file_table.c:208 ____fput+0x15/0x20 fs/file_table.c:244 task_work_run+0x19b/0x270 kernel/task_work.c:116 exit_task_work ./include/linux/task_work.h:21 do_exit+0x186b/0x2800 kernel/exit.c:839 do_group_exit+0x149/0x420 kernel/exit.c:943 SYSC_exit_group kernel/exit.c:954 SyS_exit_group+0x1d/0x20 kernel/exit.c:952 entry_SYSCALL_64_fastpath+0x1f/0xc2 arch/x86/entry/entry_64.S:203 Allocated by task 4115: save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:57 save_stack+0x43/0xd0 mm/kasan/kasan.c:502 set_track mm/kasan/kasan.c:514 kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:605 kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:544 slab_post_alloc_hook mm/slab.h:432 slab_alloc_node mm/slub.c:2708 slab_alloc mm/slub.c:2716 kmem_cache_alloc+0x1af/0x250 mm/slub.c:2721 sk_prot_alloc+0x65/0x2a0 net/core/sock.c:1334 sk_alloc+0x105/0x1010 net/core/sock.c:1396 inet6_create+0x44d/0x1150 net/ipv6/af_inet6.c:183 __sock_create+0x4f6/0x880 net/socket.c:1199 sock_create net/socket.c:1239 SYSC_socket net/socket.c:1269 SyS_socket+0xf9/0x230 net/socket.c:1249 entry_SYSCALL_64_fastpath+0x1f/0xc2 arch/x86/entry/entry_64.S:203 Memory state around the buggy address: ffff880062d9ff00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff880062d9ff80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff880062da0000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff880062da0080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff880062da0100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Reported-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 13baa00a ] It is now very clear that silly TCP listeners might play with enabling/disabling timestamping while new children are added to their accept queue. Meaning net_enable_timestamp() can be called from BH context while current state of the static key is not enabled. Lets play safe and allow all contexts. The work queue is scheduled only under the problematic cases, which are the static key enable/disable transition, to not slow down critical paths. This extends and improves what we did in commit 5fa8bbda ("net: use a work queue to defer net_disable_timestamp() work") Fixes: b90e5794 ("net: dont call jump_label_dec from irq context") Signed-off-by:
-
Alexander Potapenko authored
[ Upstream commit 540e2894 ] KMSAN (KernelMemorySanitizer, a new error detection tool) reports use of uninitialized memory in packet_bind_spkt(): Acked-by:
Alexander Potapenko <glider@google.com> Signed-off-by:
-
Mike Manning authored
[ Upstream commit 8953de2f ] Even with multicast flooding turned off, IPv6 ND should still work so that IPv6 connectivity is provided. Allow this by continuing to flood multicast traffic originated by us. Fixes: b6cb5ac8 ("net: bridge: add per-port multicast flood flag") Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
Mike Manning <mmanning@brocade.com> Acked-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 449809a6 ] SYN processing really was meant to be handled from BH. When I got rid of BH blocking while processing socket backlog in commit 5413d1ba ("net: do not block BH while processing socket backlog"), I forgot that a malicious user could transition to TCP_LISTEN from a state that allowed (SYN) packets to be parked in the socket backlog while socket is owned by the thread doing the listen() call. Sure enough syzkaller found this and reported the bug ;) ================================= [ INFO: inconsistent lock state ] 4.10.0+ #60 Not tainted --------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. syz-executor0/5090 [HC0[0]:SC0[0]:HE1:SE1] takes: (&(&hashinfo->ehash_locks[i])->rlock){+.?...}, at: [<ffffffff83a6a370>] spin_lock include/linux/spinlock.h:299 [inline] (&(&hashinfo->ehash_locks[i])->rlock){+.?...}, at: [<ffffffff83a6a370>] inet_ehash_insert+0x240/0xad0 net/ipv4/inet_hashtables.c:407 {IN-SOFTIRQ-W} state was registered at: mark_irqflags kernel/locking/lockdep.c:2923 [inline] __lock_acquire+0xbcf/0x3270 kernel/locking/lockdep.c:3295 lock_acquire+0x241/0x580 kernel/locking/lockdep.c:3753 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline] _raw_spin_lock+0x33/0x50 kernel/locking/spinlock.c:151 spin_lock include/linux/spinlock.h:299 [inline] inet_ehash_insert+0x240/0xad0 net/ipv4/inet_hashtables.c:407 reqsk_queue_hash_req net/ipv4/inet_connection_sock.c:753 [inline] inet_csk_reqsk_queue_hash_add+0x1b7/0x2a0 net/ipv4/inet_connection_sock.c:764 tcp_conn_request+0x25cc/0x3310 net/ipv4/tcp_input.c:6399 tcp_v4_conn_request+0x157/0x220 net/ipv4/tcp_ipv4.c:1262 tcp_rcv_state_process+0x802/0x4130 net/ipv4/tcp_input.c:5889 tcp_v4_do_rcv+0x56b/0x940 net/ipv4/tcp_ipv4.c:1433 tcp_v4_rcv+0x2e12/0x3210 net/ipv4/tcp_ipv4.c:1711 ip_local_deliver_finish+0x4ce/0xc40 net/ipv4/ip_input.c:216 NF_HOOK include/linux/netfilter.h:257 [inline] ip_local_deliver+0x1ce/0x710 net/ipv4/ip_input.c:257 dst_input include/net/dst.h:492 [inline] ip_rcv_finish+0xb1d/0x2110 net/ipv4/ip_input.c:396 NF_HOOK include/linux/netfilter.h:257 [inline] ip_rcv+0xd90/0x19c0 net/ipv4/ip_input.c:487 __netif_receive_skb_core+0x1ad1/0x3400 net/core/dev.c:4179 __netif_receive_skb+0x2a/0x170 net/core/dev.c:4217 netif_receive_skb_internal+0x1d6/0x430 net/core/dev.c:4245 napi_skb_finish net/core/dev.c:4602 [inline] napi_gro_receive+0x4e6/0x680 net/core/dev.c:4636 e1000_receive_skb drivers/net/ethernet/intel/e1000/e1000_main.c:4033 [inline] e1000_clean_rx_irq+0x5e0/0x1490 drivers/net/ethernet/intel/e1000/e1000_main.c:4489 e1000_clean+0xb9a/0x2910 drivers/net/ethernet/intel/e1000/e1000_main.c:3834 napi_poll net/core/dev.c:5171 [inline] net_rx_action+0xe70/0x1900 net/core/dev.c:5236 __do_softirq+0x2fb/0xb7d kernel/softirq.c:284 invoke_softirq kernel/softirq.c:364 [inline] irq_exit+0x19e/0x1d0 kernel/softirq.c:405 exiting_irq arch/x86/include/asm/apic.h:658 [inline] do_IRQ+0x81/0x1a0 arch/x86/kernel/irq.c:250 ret_from_intr+0x0/0x20 native_safe_halt+0x6/0x10 arch/x86/include/asm/irqflags.h:53 arch_safe_halt arch/x86/include/asm/paravirt.h:98 [inline] default_idle+0x8f/0x410 arch/x86/kernel/process.c:271 arch_cpu_idle+0xa/0x10 arch/x86/kernel/process.c:262 default_idle_call+0x36/0x60 kernel/sched/idle.c:96 cpuidle_idle_call kernel/sched/idle.c:154 [inline] do_idle+0x348/0x440 kernel/sched/idle.c:243 cpu_startup_entry+0x18/0x20 kernel/sched/idle.c:345 start_secondary+0x344/0x440 arch/x86/kernel/smpboot.c:272 verify_cpu+0x0/0xfc irq event stamp: 1741 hardirqs last enabled at (1741): [<ffffffff84d49d77>] __raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:160 [inline] hardirqs last enabled at (1741): [<ffffffff84d49d77>] _raw_spin_unlock_irqrestore+0xf7/0x1a0 kernel/locking/spinlock.c:191 hardirqs last disabled at (1740): [<ffffffff84d4a732>] __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:108 [inline] hardirqs last disabled at (1740): [<ffffffff84d4a732>] _raw_spin_lock_irqsave+0xa2/0x110 kernel/locking/spinlock.c:159 softirqs last enabled at (1738): [<ffffffff84d4deff>] __do_softirq+0x7cf/0xb7d kernel/softirq.c:310 softirqs last disabled at (1571): [<ffffffff84d4b92c>] do_softirq_own_stack+0x1c/0x30 arch/x86/entry/entry_64.S:902 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&hashinfo->ehash_locks[i])->rlock); <Interrupt> lock(&(&hashinfo->ehash_locks[i])->rlock); *** DEADLOCK *** 1 lock held by syz-executor0/5090: #0: (sk_lock-AF_INET6){+.+.+.}, at: [<ffffffff83406b43>] lock_sock include/net/sock.h:1460 [inline] #0: (sk_lock-AF_INET6){+.+.+.}, at: [<ffffffff83406b43>] sock_setsockopt+0x233/0x1e40 net/core/sock.c:683 stack backtrace: CPU: 1 PID: 5090 Comm: syz-executor0 Not tainted 4.10.0+ #60 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:15 [inline] dump_stack+0x292/0x398 lib/dump_stack.c:51 print_usage_bug+0x3ef/0x450 kernel/locking/lockdep.c:2387 valid_state kernel/locking/lockdep.c:2400 [inline] mark_lock_irq kernel/locking/lockdep.c:2602 [inline] mark_lock+0xf30/0x1410 kernel/locking/lockdep.c:3065 mark_irqflags kernel/locking/lockdep.c:2941 [inline] __lock_acquire+0x6dc/0x3270 kernel/locking/lockdep.c:3295 lock_acquire+0x241/0x580 kernel/locking/lockdep.c:3753 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline] _raw_spin_lock+0x33/0x50 kernel/locking/spinlock.c:151 spin_lock include/linux/spinlock.h:299 [inline] inet_ehash_insert+0x240/0xad0 net/ipv4/inet_hashtables.c:407 reqsk_queue_hash_req net/ipv4/inet_connection_sock.c:753 [inline] inet_csk_reqsk_queue_hash_add+0x1b7/0x2a0 net/ipv4/inet_connection_sock.c:764 dccp_v6_conn_request+0xada/0x11b0 net/dccp/ipv6.c:380 dccp_rcv_state_process+0x51e/0x1660 net/dccp/input.c:606 dccp_v6_do_rcv+0x213/0x350 net/dccp/ipv6.c:632 sk_backlog_rcv include/net/sock.h:896 [inline] __release_sock+0x127/0x3a0 net/core/sock.c:2052 release_sock+0xa5/0x2b0 net/core/sock.c:2539 sock_setsockopt+0x60f/0x1e40 net/core/sock.c:1016 SYSC_setsockopt net/socket.c:1782 [inline] SyS_setsockopt+0x2fb/0x3a0 net/socket.c:1765 entry_SYSCALL_64_fastpath+0x1f/0xc2 RIP: 0033:0x4458b9 RSP: 002b:00007fe8b26c2b58 EFLAGS: 00000292 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 0000000000000006 RCX: 00000000004458b9 RDX: 000000000000001a RSI: 0000000000000001 RDI: 0000000000000006 RBP: 00000000006e2110 R08: 0000000000000010 R09: 0000000000000000 R10: 00000000208c3000 R11: 0000000000000292 R12: 0000000000708000 R13: 0000000020000000 R14: 0000000000001000 R15: 0000000000000000 Fixes: 5413d1ba ("net: do not block BH while processing socket backlog") Signed-off-by:
-
Ido Schimmel authored
[ Upstream commit f7df4923 ] When the structure of the LPM tree changes (f.e., due to the addition of a new prefix), we unbind the old tree and then bind the new one. This may result in temporary packet loss. Instead, overwrite the old binding with the new one. Fixes: 6b75c480 ("mlxsw: spectrum_router: Add virtual router management") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Jakub Kicinski authored
[ Upstream commit a717e3f7 ] There is no guarantees that callers of the TX path will hold the RCU lock. Grab it explicitly. Fixes: fceb9c3e ("geneve: avoid using stale geneve socket.") Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Jakub Kicinski authored
[ Upstream commit 56de859e ] There is no guarantees that callers of the TX path will hold the RCU lock. Grab it explicitly. Fixes: c6fcc4fc ("vxlan: avoid using stale vxlan socket.") Signed-off-by:
-
Paul Hüber authored
[ Upstream commit 51fb60eb ] l2tp_ip_backlog_recv may not return -1 if the packet gets dropped. The return value is passed up to ip_local_deliver_finish, which treats negative values as an IP protocol number for resubmission. Signed-off-by:
Paul Hüber <phueber@kernsp.in> Signed-off-by:
-
Roman Mashak authored
[ Upstream commit edb9d1bf ] When tc actions are loaded as a module and no actions have been installed, flushing them would result in actions removed from the memory, but modules reference count not being decremented, so that the modules would not be unloaded. Following is example with GACT action: % sudo modprobe act_gact % lsmod Module Size Used by act_gact 16384 0 % % sudo tc actions ls action gact % % sudo tc actions flush action gact % lsmod Module Size Used by act_gact 16384 1 % sudo tc actions flush action gact % lsmod Module Size Used by act_gact 16384 2 % sudo rmmod act_gact rmmod: ERROR: Module act_gact is in use .... After the fix: % lsmod Module Size Used by act_gact 16384 0 % % sudo tc actions add action pass index 1 % sudo tc actions add action pass index 2 % sudo tc actions add action pass index 3 % lsmod Module Size Used by act_gact 16384 3 % % sudo tc actions flush action gact % lsmod Module Size Used by act_gact 16384 0 % % sudo tc actions flush action gact % lsmod Module Size Used by act_gact 16384 0 % sudo rmmod act_gact % lsmod Module Size Used by % Fixes: f97017cd ("net-sched: Fix actions flushing") Signed-off-by:
Roman Mashak <mrv@mojatatu.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit 2e3ce5bc ] Commit b8607805 ("sctp: not copying duplicate addrs to the assoc's bind address list") tried to check for duplicate address before copying to asoc's bind_addr list from global addr list. But all the addrs' sin_ports in global addr list are 0 while the addrs' sin_ports are bp->port in asoc's bind_addr list. It means even if it's a duplicate address, af->cmp_addr will still return 0 as the their sin_ports are different. This patch is to fix it by setting the sin_port for addr param with bp->port before comparing the addrs. Fixes: b8607805 ("sctp: not copying duplicate addrs to the assoc's bind address list") Reported-by:
Wei Chen <weichen@redhat.com> Signed-off-by:
-
Julian Anastasov authored
[ Upstream commit 6e28099d ] Restore the lost masking of TOS in input route code to allow ip rules to match it properly. Problem [1] noticed by Shmulik Ladkani <shmulik.ladkani@gmail.com> [1] http://marc.info/?t=137331755300040&r=1&w=2 Fixes: 89aef892 ("ipv4: Delete routing cache.") Signed-off-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
-
Julian Anastasov authored
[ Upstream commit 8bcfd092 ] Avoid matching of random stack value for uid when rules are looked up on input route or when RP filter is used. Problem should affect only setups that use ip rules with uid range. Fixes: 622ec2c9 ("net: core: add UID to flows, rules, and routes") Signed-off-by:
-
Brian Russell authored
[ Upstream commit 1158632b ] When using IPv6 transport and a default dst, a pointer to the configured source address is passed into the route lookup. If no source address is configured, then the value is overwritten. IPv6 route lookup ignores egress ifindex match if the source address is set, so if egress ifindex match is desired, the source address must be passed as any. The overwrite breaks this for subsequent lookups. Avoid this by copying the configured address to an existing stack variable and pass a pointer to that instead. Fixes: 272d96a5 ("net: vxlan: lwt: Use source ip address during route lookup.") Signed-off-by:
Brian Russell <brussell@brocade.com> Acked-by:
Jiri Benc <jbenc@redhat.com> Signed-off-by:
-
David Forster authored
[ Upstream commit 7dcdf941 ] Align vti6 with vti by returning GRE_KEY flag. This enables iproute2 to display tunnel keys on "ip -6 tunnel show" Signed-off-by:
David Forster <dforster@brocade.com> Signed-off-by:
-
Matthias Schiffer authored
[ Upstream commit 4e37d691 ] The incorrect check caused an off-by-one error: the maximum VID 0xffffff was unusable. Fixes: d342894c ("vxlan: virtual extensible lan") Signed-off-by:
Matthias Schiffer <mschiffer@universe-factory.net> Acked-by:
-
Marcelo Ricardo Leitner authored
[ Upstream commit dfcb9f4f ] commit 2dcab598 ("sctp: avoid BUG_ON on sctp_wait_for_sndbuf") attempted to avoid a BUG_ON call when the association being used for a sendmsg() is blocked waiting for more sndbuf and another thread did a peeloff operation on such asoc, moving it to another socket. As Ben Hutchings noticed, then in such case it would return without locking back the socket and would cause two unlocks in a row. Further analysis also revealed that it could allow a double free if the application managed to peeloff the asoc that is created during the sendmsg call, because then sctp_sendmsg() would try to free the asoc that was created only for that call. This patch takes another approach. It will deny the peeloff operation if there is a thread sleeping on the asoc, so this situation doesn't exist anymore. This avoids the issues described above and also honors the syscalls that are already being handled (it can be multiple sendmsg calls). Joint work with Xin Long. Fixes: 2dcab598 ("sctp: avoid BUG_ON on sctp_wait_for_sndbuf") Cc: Alexander Popov <alex.popov@linux.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Tariq Toukan authored
[ Upstream commit 36154be4 ] In cqe compression with striding RQ, the decompression of the CQE field wqe_counter was done with a wrong wraparound value. This caused handling cqes with a wrong pointer to wqe (rx descriptor) and creating SKBs with wrong data, pointing to wrong (and already consumed) strides/pages. The meaning of the CQE field wqe_counter in striding RQ holds the stride index instead of the WQE index. Hence, when decompressing a CQE, wqe_counter should have wrapped-around the number of strides in a single multi-packet WQE. We dropped this wrap-around mask at all in CQE decompression of striding RQ. It is not needed as in such cases the CQE compression session would break because of different value of wqe_id field, starting a new compression session. Tested: ethtool -K ethxx lro off/on ethtool --set-priv-flags ethxx rx_cqe_compress on super_netperf 16 {ipv4,ipv6} -t TCP_STREAM -m 50 -D verified no csum errors and no page refcount issues. Fixes: 7219ab34 ("net/mlx5e: CQE compression") Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Reported-by:
Tom Herbert <tom@herbertland.com> Cc: kernel-team@fb.com Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Saeed Mahameed authored
[ Upstream commit 6dc4b54e ] When the admin enables/disables cqe compression, updating mpwqe stride size is required: CQE compress ON ==> stride size = 256B CQE compress OFF ==> stride size = 64B This is already done on driver load via mlx5e_set_rq_type_params, all we need is just to call it on arbitrary admin changes of cqe compression state via priv flags or when changing timestamping state (as it is mutually exclusive with cqe compression). This bug introduces no functional damage, it only makes cqe compression occur less often, since in ConnectX4-LX CQE compression is performed only on packets smaller than stride size. Tested: ethtool --set-priv-flags ethxx rx_cqe_compress on pktgen with 64 < pkt size < 256 and netperf TCP_STREAM (IPv4/IPv6) verify `ethtool -S ethxx | grep compress` are advancing more often (rapidly) Fixes: 7219ab34 ("net/mlx5e: CQE compression") Signed-off-by:
-
Tariq Toukan authored
[ Upstream commit b0d4660b ] Some of RQ type parameters are derived from CQE compression state flag, CQE compression flag was initialized only after RQ type parameters setup. This leads to load RQ with stride size smaller than what we want for when CQE compression is on. This bug introduces no functional damage, it only makes CQE compression occur less often, since in ConnectX4-LX CQE compression is performed only on packets smaller than stride size. Fix this by marking default status of CQE compression in PFLAG prior to calling mlx5e_set_rq_priv_params(), as it inits some fields based on it. Tested: load driver on systems where rx CQE compress will be on (MH) pktgen with 64 < pkt size < 256 and netperf TCP_STREAM (IPv4/IPv6) verify `ethtool -S ethxx | grep compress` are advancing more often (rapidly) Fixes: 2fc4bfb7 ("net/mlx5e: Dynamic RQ type infrastructure") Signed-off-by:
-
