- 24 Sep, 2014 12 commits
-
-
Peter Chen authored
Adds chipidea to the list of DT vendor prefixes. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peter Chen authored
Some kernel-doc style comment are not satisfied for format, fix them. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peter Chen authored
We have only needed to enable otg initialization when both of below conditions are satisfied: - The controller is otg capable - The gadget function is enabled If the controller is otg capable, but is host-only configuration, we do not need to access register otgsc and do any otg operations (eg, create otg workqueue). Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Stefan Agner authored
This adds Vybrid VF610 SoC support. The IP is very similar to i.MX6, however, the non-core registers are spread in two different register areas. Hence we support multiple instances of the USB misc driver and add the driver instance to the imx_usbmisc_data structure. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peter Chen authored
TPL (Targeted Peripheral List) is needed for targets host (OTG and Embedded Hosts) for usb certification and other vendor specific requirements. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peter Chen authored
For OTG and Embedded hosts, they may need TPL (Targeted Peripheral List) for usb certification and other vender specific requirements, the platform can tell chipidea core driver if it supports tpl through DT or platform data. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peter Chen authored
The TPL (Targeted Peripheral List) is used for targeted hosts (non-PC hosts), and it can be used at USB OTG & EH certification and some specific products which need white list. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peter Chen authored
Update configuration for USB_OTG_WHITELIST, any targeted hosts (non PC-hosts) can have TPL (Targered Peripheral List). Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peter Chen authored
According to On-The-Go and Embedded Host Supplement to the USB Revision 2.0 Specification, the targeted hosts (non-PC hosts) include both embedded hosts and otg, and each targeted host product defines the set of supported peripherals on a TPL (Targeted Peripheral List). So, TPL should apply for both OTG and embedded host, and the otg support is not a must for embedded host. The TPL support feature will only be effect when CONFIG_USB_OTG_WHITELIST has been chosen and hcd->tpl_support flag is set, it can avoid the enumeration fails problem for the user who chooses CONFIG_USB_OTG_WHITELIST wrongly. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peter Chen authored
The targeted hosts (non-PC hosts) need to have TPL (Targeted Peripheral List) for USB OTG & EH certification and other vendor specific requirements. The platform who needs TPL feature should set this flag at usb host controller driver. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
Enable device-qualifier quirk for Elan Touchscreen, which often fails to handle requests for the device_descriptor. Note that the device sometimes do respond properly with a Request Error (three times as USB core retries), but usually fails to respond at all. When this happens any further descriptor requests also fails, for example: [ 1528.688934] usb 2-7: new full-speed USB device number 4 using xhci_hcd [ 1530.945588] usb 2-7: unable to read config index 0 descriptor/start: -71 [ 1530.945592] usb 2-7: can't read configurations, error -71 This has been observed repeating for over a minute before eventual successful enumeration. Reported-by: Drew Von Spreecken <drewvs@gmail.com> Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
Add new quirk for devices that cannot handle requests for the device_qualifier descriptor. A USB-2.0 compliant device must respond to requests for the device_qualifier descriptor (even if it's with a request error), but at least one device is known to misbehave after such a request. Suggested-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 23 Sep, 2014 1 commit
-
-
Felipe Balbi authored
This reverts commit f2267089. That commit causes more problem than fixes. Firstly, kfree() should be called after usb_ep_dequeue() and secondly, the way things are, we will try to dequeue a request that has already completed much more frequently than one which is pending. Cc: Li Jun <b47624@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Cc: stable <stable@vger.kernel.org> # 3.17 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 22 Sep, 2014 2 commits
-
-
Greg Kroah-Hartman authored
We want the USB fixes in this branch as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
Merge tag 'usb-serial-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB-serial updates for v3.18-rc1 These changes add two new "simple" drivers, while removing the redundant zte_ev driver (PIDs moved to option). Included are also some minor clean ups to the xsens_mt driver, and the enabling of further baud rates for pl2303 devices. Signed-off-by: Johan Hovold <johan@kernel.org>
-
- 21 Sep, 2014 3 commits
-
-
Linus Torvalds authored
-
git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: "Fixes for ARM, the most notable being the fix from Nathan Lynch to fix the state of various registers during execve, to ensure that data can't be leaked between two executables. Fixes from Victor Kamensky for get_user() on big endian platforms, since the addition of 8-byte get_user() support broke these fairly badly. A fix from Sudeep Holla for affinity setting when hotplugging CPU 0. A fix from Stephen Boyd for a perf-induced sleep attempt while atomic. Lastly, a correctness fix for emulation of the SWP instruction on ARMv7+, and a fix for wrong carry handling when updating the translation table base address on LPAE platforms" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8149/1: perf: Don't sleep while atomic when enabling per-cpu interrupts ARM: 8148/1: flush TLS and thumbee register state during exec ARM: 8151/1: add missing exports for asm functions required by get_user macro ARM: 8137/1: fix get_user BE behavior for target variable with size of 8 bytes ARM: 8135/1: Fix in-correct barrier usage in SWP{B} emulation ARM: 8133/1: use irq_set_affinity with force=false when migrating irqs ARM: 8132/1: LPAE: drop wrong carry flag correction after adding TTBR1_OFFSET
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media fixes from Mauro Carvalho Chehab: "some media bug fixes: - a Kconfig dependency issue - some fixes for af9033/it913x demod to be more reliable and address a performance regression - cx18: fix an oops on devices with tda8290 tuner - two new USB IDs for af9035 - a couple fixes on smapp driver" * tag 'media-v3.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] af9035: new IDs: add support for PCTV 78e and PCTV 79e [media] af9033: feed clock to RF tuner [media] it913x: init tuner on attach [media] af9033: update IT9135 tuner inittabs [media] Kconfig: do not select SPI bus on sub-driver auto-select [media] cx18: fix kernel oops with tda8290 tuner [media] smiapp: Set sub-device owner [media] smiapp: Fix power count handling
-
- 20 Sep, 2014 8 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging / IIO fixes from Greg KH: "Here are some IIO and Staging driver fixes for 3.17-rc6. They are all pretty simple, and resolve reported issues" * tag 'staging-3.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: vt6655: buffer overflow in ioctl iio:magnetometer: bugfix magnetometers gain values iio: adc: at91: don't use the last converted data register iio: adc: xilinx-xadc: assign auxiliary channels address correctly iio: meter: ade7758: Fix indio_dev->trig assignment iio: inv_mpu6050: Fix indio_dev->trig assignment iio: gyro: itg3200: Fix indio_dev->trig assignment iio: st_sensors: Fix indio_dev->trig assignment iio: hid_sensor_hub: Fix indio_dev->trig assignment iio: adc: ad_sigma_delta: Fix indio_dev->trig assignment iio: accel: bma180: Fix indio_dev->trig assignment iio:trigger: modify return value for iio_trigger_get iio:inkern: fix overwritten -EPROBE_DEFER in of_iio_channel_get_by_name
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes / quirks from Greg KH: "Here are some USB and PHY fixes and quirks for 3.17-rc6. Nothing major, just a few things that have been reported" * tag 'usb-3.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: storage: Add quirks for Entrega/Xircom USB to SCSI converters USB: storage: Add quirk for Ariston Technologies iConnect USB to SCSI adapter USB: storage: Add quirk for Adaptec USBConnect 2000 USB-to-SCSI Adapter USB: EHCI: unlink QHs even after the controller has stopped phy: spear1340-miphy: fix driver dependencies phy: spear1310-miphy: fix driver dependencies phy: miphy365x: Fix off-by-one error
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds authored
Pull SCSI target fixes from Nicholas Bellinger: "Here are the target pending fixes for v3.17-rc6. Included are Sagi's long overdue fixes related to iser-target shutdown, along with a couple of fixes from Sebastian related to ALUA Referrals changes that when in during the v3.14 time-frame. Also included are a few iscsi-target fixes, most recently of which where found during Joern's Coverity scanning of target code" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: iscsi-target: avoid NULL pointer in iscsi_copy_param_list failure iscsi-target: Fix memory corruption in iscsit_logout_post_handler_diffcid target: Fix inverted logic in SE_DEV_ALUA_SUPPORT_STATE_STORE target: Fix user data segment multiplier in spc_emulate_evpd_b3() iscsi-target: Ignore ICF_GOT_LAST_DATAOUT during Data-Out ITT lookup Target/iser: Fix initiator_depth and responder_resources Target/iser: Avoid calling rdma_disconnect twice Target/iser: Don't put isert_conn inside disconnected handler Target/iser: Get isert_conn reference once got to connected_handler
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "A bunch of radeon fixes for oops on module unload, and problems with resetting the dma engine, one nouveau fix for black boxes in rendering on my mbp retina, one sti fix, and a couple of intel fixes" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/nouveau: ltc/gf100-: fix cbc issues on certain boards drm/bochs: add missing drm_connector_register call drm/cirrus: add missing drm_connector_register call drm/radeon: Fix typo 'addr' -> 'entry' in rs400_gart_set_page drm/nouveau/runpm: fix module unload drm/radeon/px: fix module unload vgaswitcheroo: add vga_switcheroo_fini_domain_pm_ops drm/radeon: don't reset dma on r6xx-evergreen init drm/radeon: don't reset sdma on CIK init drm/radeon: don't reset dma on NI/SI init drm/radeon/dpm: fix resume on mullins drm/radeon: Disable HDP flush before every CS again for < r600 drm/radeon: delete unused PTE_* defines drm/i915: Add limited color range readout for HDMI/DP ports on g4x/vlv/chv drm: sti: do not iterate over the info frame array drm/i915: Fix SRC_COPY width on 830/845g
-
Ben Skeggs authored
A mismatch between FB and LTC's idea of how big a large page is causes issues such as black "holes" in rendering to occur on some boards (those where LTC is configured for 64KiB large pages) when compression is used. Confirmed to fix at least the GK107 MBP. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
single fix for regression on rs4xx/rs690/rs740 * 'drm-fixes-3.17' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: Fix typo 'addr' -> 'entry' in rs400_gart_set_page
-
Gerd Hoffmann authored
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Gerd Hoffmann authored
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
- 19 Sep, 2014 14 commits
-
-
Paul Zimmerman authored
Starting with v3.18-rc, patches for dwc2 will go through Felipe's tree. Add a T: line to MAINTAINERS to document this. Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Paul Zimmerman authored
The driver's handling of DMA buffers for non-aligned transfers was kind of nuts. For IN transfers, it left the URB DMA buffer mapped until the transfer completed, then synced it, copied the data from the bounce buffer, then synced it again. Instead of that, just call usb_hcd_unmap_urb_for_dma() to unmap the buffer before starting the transfer. Then no syncing is required when doing the copy. This should also allow handling of other types of mappings besides just dma_map_single() ones. Also reduce the size of the bounce buffer allocation for Isoc endpoints to 3K, since that's the largest possible transfer size. Tested on Raspberry Pi and Altera SOCFPGA. Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Paul Zimmerman authored
Clip max_transfer_size to 65535 for host. dwc2_hc_setup_align_buf() allocates coherent buffers with this size, and if it's too large we can exhaust the coherent DMA pool. Tested on Raspberry Pi and Altera SOCFPGA. Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Robert Baldyga authored
When device is stopped or suspended clock is not needed so we can disable it for this time. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Robert Baldyga authored
Because we have not enough memory to have each TX FIFO of size at least 3072 bytes (the maximum single packet size with 3 transactions per microframe), we create four FIFOs of lenght 1024, and four of length 3072 bytes, and assing them to endpoints dynamically according to maxpacket size value of given endpoint. Up to now there were initialized 16 TX FIFOs, but we use only 8 IN endpoints, so we can split available memory for 8 FIFOs to have more memory for each one. It needed to do some small modifications in few places in code, because there was assumption that TX FIFO numbers assigned to endpoints are the same as the endpoint numbers, which is not true since we have dynamic FIFO assigning. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Marek Szyprowski authored
Print warning if FIFOs are configured in such a way that they don't fit into the SPRAM available on the s3c hsotg module. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Marek Szyprowski authored
Some DWC2/s3c-hsotg debug messages are really useless for typical user, so hide them behind dev_dbg(). Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andrzej Pietrasiewicz authored
Adjust the debug text to the name of the printed variable. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Carpenter authored
->u.generic_elem.len is a user controlled number between 0-255. We should limit it to avoid memory corruption. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
Merge tag 'iio-fixes-3.17a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: First round of IIO fixes for the 3.17 cycle. * Fix an overwritten error return that can prevent deferred probing when using of_iio_channel_get_by_name * A series that deals with an incorrect reference count when the default trigger is set within the main probe routine for a driver. Can result in a double free if the trigger is changed. * Fix a buglet with xilinx-xadc concerning setup of the address for an aux channel. * At91 adc driver could sometimes get a touchscreen reading rather than the intended adc channel. This is fixed by using the channel data register instead. * Fix some ST magnetometer gain values that differ in production parts from the prerelease ones used for driver development.
-
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usbGreg Kroah-Hartman authored
Felipe writes: usb: changes for v3.18 merge window Quite big pull request this time. Audio and UVC gadgets can now be used with our configfs-based binding. We have three PHY drivers being removed because a new one has been added using new PHY framework. Gadget framework got a new ->reset callback preparing for some other changes to come on next merge window. A few new drivers came in as well; among those we have a new UDC driver from Xilinx and two new glue layers for DWC3 (ST and Qualcomm). DWC3 also learned about tracepoints which will help debugging quite a bit. Other than that, a big series of non-critical fixes and cleanups. All patches have been on linux-next for quite a bit of time and I boot tested these changes on platforms I have access to and work with mainline. Signed-of-by: Felipe Balbi <balbi@ti.com>
-
Mark authored
This patch adds quirks for Entrega Technologies (later Xircom PortGear) USB- SCSI converters. They use Shuttle Technology EUSB-01/EUSB-S1 chips. The US_FL_SCM_MULT_TARG quirk is needed to allow multiple devices on the SCSI chain to be accessed. Without it only the (single) device with SCSI ID 0 can be used. The standalone converter sold by Entrega had model number U1-SC25. Xircom acquired Entrega and re-branded the product line PortGear. The PortGear USB to SCSI Converter (model PGSCSI) is internally identical to the Entrega product, but later models may use a different USB ID. The Entrega-branded units have USB ID 1645:0007, as does my Xircom PGSCSI, but the Windows and Macintosh drivers also support 085A:0028. Entrega also sold the "Mac USB Dock", which provides two USB ports, a Mac (8-pin mini-DIN) serial port and a SCSI port. It appears to the computer as a four-port hub, USB-serial, and USB-SCSI converters. The USB-SCSI part may have initially used the same ID as the standalone U1-SC25 (1645:0007), but later production used 085A:0026. My Xircom PortGear PGSCSI has bcdDevice=0x0100. Units with bcdDevice=0x0133 probably also exist. This patch adds quirks for 1645:0007, 085A:0026 and 085A:0028. The Windows driver INF file also mentions 085A:0032 "PortStation SCSI Module", but I couldn't find any mention of that actually existing in the wild; perhaps it was cancelled before release? Signed-off-by: Mark Knibbs <markk@clara.co.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mark authored
Hi, The Ariston Technologies iConnect 025 and iConnect 050 (also known as e.g. iSCSI-50) are SCSI-USB converters which use Shuttle Technology/SCM Microsystems chips. Only the connectors differ; both have the same USB ID. The US_FL_SCM_MULT_TARG quirk is required to use SCSI devices with ID other than 0. I don't have one of these, but based on the other entries for Shuttle/ SCM-based converters this patch is very likely correct. I used 0x0000 and 0x9999 for bcdDeviceMin and bcdDeviceMax because I'm not sure which bcdDevice value the products use. Signed-off-by: Mark Knibbs <markk@clara.co.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mark authored
The Adaptec USBConnect 2000 is another SCSI-USB converter which uses Shuttle Technology/SCM Microsystems chips. The US_FL_SCM_MULT_TARG quirk is required to use SCSI devices with ID other than 0. I don't have a USBConnect 2000, but based on the other entries for Shuttle/ SCM-based converters this patch is very likely correct. I used 0x0000 and 0x9999 for bcdDeviceMin and bcdDeviceMax because I'm not sure which bcdDevice value the product uses. Signed-off-by: Mark Knibbs <markk@clara.co.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-