Add iopf-capable hw page table attach/detach/replace helpers. The pointer
to iommufd_device is stored in the domain attachment handle, so that it
can be echo'ed back in the iopf_group.

The iopf-capable hw page tables can only be attached to devices that
support the IOMMU_DEV_FEAT_IOPF feature. On the first attachment of an
iopf-capable hw_pagetable to the device, the IOPF feature is enabled on
the device. Similarly, after the last iopf-capable hwpt is detached from
the device, the IOPF feature is disabled on the device.

The current implementation allows a replacement between iopf-capable and
non-iopf-capable hw page tables. This matches the nested translation use
case, where a parent domain is attached by default and can then be
replaced with a nested user domain with iopf support.

Link: https://lore.kernel.org/r/20240702063444.105814-8-baolu.lu@linux.intel.comSigned-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

An iommufd fault object provides an interface for delivering I/O page
faults to user space. These objects are created and destroyed by user
space, and they can be associated with or dissociated from hardware page
table objects during page table allocation or destruction.

User space interacts with the fault object through a file interface. This
interface offers a straightforward and efficient way for user space to
handle page faults. It allows user space to read fault messages
sequentially and respond to them by writing to the same file. The file
interface supports reading messages in poll mode, so it's recommended that
user space applications use io_uring to enhance read and write efficiency.

A fault object can be associated with any iopf-capable iommufd_hw_pgtable
during the pgtable's allocation. All I/O page faults triggered by devices
when accessing the I/O addresses of an iommufd_hw_pgtable are routed
through the fault object to user space. Similarly, user space's responses
to these page faults are routed back to the iommu device driver through
the same fault object.

Link: https://lore.kernel.org/r/20240702063444.105814-7-baolu.lu@linux.intel.comSigned-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

iommu_hwpt_pgfaults represent fault messages that the userspace can
retrieve. Multiple iommu_hwpt_pgfaults might be put in an iopf group,
with the IOMMU_PGFAULT_FLAGS_LAST_PAGE flag set only for the last
iommu_hwpt_pgfault.

An iommu_hwpt_page_response is a response message that the userspace
should send to the kernel after finishing handling a group of fault
messages. The @dev_id, @pasid, and @grpid fields in the message
identify an outstanding iopf group for a device. The @cookie field,
which matches the cookie field of the last fault in the group, will
be used by the kernel to look up the pending message.

Link: https://lore.kernel.org/r/20240702063444.105814-6-baolu.lu@linux.intel.comSigned-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

Unlike the SVA case where each PASID of a device has an SVA domain
attached to it, the I/O page faults are handled by the fault handler
of the SVA domain. The I/O page faults for a user page table might
be handled by the domain attached to RID or the domain attached to
the PASID, depending on whether the PASID table is managed by user
space or kernel. As a result, there is a need for the domain attach
group interfaces to have attach handle support. The attach handle
will be forwarded to the fault handler of the user domain.

Add some variants of the domain attaching group interfaces so that they
could support the attach handle and export them for use in IOMMUFD.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240702063444.105814-5-baolu.lu@linux.intel.comSigned-off-by: Will Deacon <will@kernel.org>

Previously, the domain that a page fault targets is stored in an
iopf_group, which represents a minimal set of page faults. With the
introduction of attach handle, replace the domain with the handle
so that the fault handler can obtain more information as needed
when handling the faults.

iommu_report_device_fault() is currently used for SVA page faults,
which handles the page fault in an internal cycle. The domain is retrieved
with iommu_get_domain_for_dev_pasid() if the pasid in the fault message
is valid. This doesn't work in IOMMUFD case, where if the pasid table of
a device is wholly managed by user space, there is no domain attached to
the PASID of the device, and all page faults are forwarded through a
NESTING domain attaching to RID.

Add a static flag in iommu ops, which indicates if the IOMMU driver
supports user-managed PASID tables. In the iopf deliver path, if no
attach handle found for the iopf PASID, roll back to RID domain when
the IOMMU driver supports this capability.

iommu_get_domain_for_dev_pasid() is no longer used and can be removed.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240702063444.105814-4-baolu.lu@linux.intel.comSigned-off-by: Will Deacon <will@kernel.org>

The struct sva_iommu represents an association between an SVA domain and
a PASID of a device. It's stored in the iommu group's pasid array and also
tracked by a list in the per-mm data structure. Removes duplicate tracking
of sva_iommu by eliminating the list.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240702063444.105814-3-baolu.lu@linux.intel.comSigned-off-by: Will Deacon <will@kernel.org>

Currently, when attaching a domain to a device or its PASID, domain is
stored within the iommu group. It could be retrieved for use during the
window between attachment and detachment.

With new features introduced, there's a need to store more information
than just a domain pointer. This information essentially represents the
association between a domain and a device. For example, the SVA code
already has a custom struct iommu_sva which represents a bond between
sva domain and a PASID of a device. Looking forward, the IOMMUFD needs
a place to store the iommufd_device pointer in the core, so that the
device object ID could be quickly retrieved in the critical fault handling
path.

Introduce domain attachment handle that explicitly represents the
attachment relationship between a domain and a device or its PASID.
Co-developed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240702063444.105814-2-baolu.lu@linux.intel.comSigned-off-by: Will Deacon <will@kernel.org>

Merge tag 'perf-tools-fixes-for-v6.10-2-2024-06-09' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Update copies of kernel headers, which resulted in support for the
   new 'mseal' syscall, SUBVOL statx return mask bit, RISC-V and PPC
   prctls, fcntl's DUPFD_QUERY, POSTED_MSI_NOTIFICATION IRQ vector,
   'map_shadow_stack' syscall for x86-32.

 - Revert perf.data record memory allocation optimization that ended up
   causing a regression, work is being done to re-introduce it in the
   next merge window.

 - Fix handling of minimal vmlinux.h file used with BPF's CO-RE when
   interrupting the build.

* tag 'perf-tools-fixes-for-v6.10-2-2024-06-09' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
  perf bpf: Fix handling of minimal vmlinux.h file when interrupting the build
  Revert "perf record: Reduce memory for recording PERF_RECORD_LOST_SAMPLES event"
  tools headers arm64: Sync arm64's cputype.h with the kernel sources
  tools headers uapi: Sync linux/stat.h with the kernel sources to pick STATX_SUBVOL
  tools headers UAPI: Update i915_drm.h with the kernel sources
  tools headers UAPI: Sync kvm headers with the kernel sources
  tools arch x86: Sync the msr-index.h copy with the kernel sources
  tools headers: Update the syscall tables and unistd.h, mostly to support the new 'mseal' syscall
  perf trace beauty: Update the arch/x86/include/asm/irq_vectors.h copy with the kernel sources to pick POSTED_MSI_NOTIFICATION
  perf beauty: Update copy of linux/socket.h with the kernel sources
  tools headers UAPI: Sync fcntl.h with the kernel sources to pick F_DUPFD_QUERY
  tools headers UAPI: Sync linux/prctl.h with the kernel sources
  tools include UAPI: Sync linux/stat.h with the kernel sources

Pull EDAC fixes from Borislav Petkov:

 - Convert PCI core error codes to proper error numbers since latter get
   propagated all the way up to the module loading functions

* tag 'edac_urgent_for_v6.10_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/igen6: Convert PCIBIOS_* return codes to errnos
  EDAC/amd64: Convert PCIBIOS_* return codes to errnos

Pull clk fix from Stephen Boyd:
 "One fix for the SiFive PRCI clocks so that the device boots again.

  This driver was registering clkdev lookups that were always going to
  be useless. This wasn't a problem until clkdev started returning an
  error in these cases, causing this driver to fail probe, and thus boot
  to fail because clks are essential for most drivers. The fix is
  simple, don't use clkdev because this is a DT based system where
  clkdev isn't used"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: sifive: Do not register clkdevs for PRCI clocks

Pull smb client fixes from Steve French:
 "Two small smb3 client fixes:

   - fix deadlock in umount

   - minor cleanup due to netfs change"

* tag '6.10-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Don't advance the I/O iterator before terminating subrequest
  smb: client: fix deadlock in smb2_find_smb_tcon()

Pull HID fixes from Benjamin Tissoires:

 - fix potential read out of bounds in hid-asus (Andrew Ballance)

 - fix endian-conversion on little endian systems in intel-ish-hid (Arnd
   Bergmann)

 - A couple of new input event codes (Aseda Aboagye)

 - errors handling fixes in hid-nvidia-shield (Chen Ni), hid-nintendo
   (Christophe JAILLET), hid-logitech-dj (José Expósito)

 - current leakage fix while the device is in suspend on a i2c-hid
   laptop (Johan Hovold)

 - other assorted smaller fixes and device ID / quirk entry additions

* tag 'for-linus-2024060801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: Ignore battery for ELAN touchscreens 2F2C and 4116
  HID: i2c-hid: elan: fix reset suspend current leakage
  dt-bindings: HID: i2c-hid: elan: add 'no-reset-on-power-off' property
  dt-bindings: HID: i2c-hid: elan: add Elan eKTH5015M
  dt-bindings: HID: i2c-hid: add dedicated Ilitek ILI2901 schema
  input: Add support for "Do Not Disturb"
  input: Add event code for accessibility key
  hid: asus: asus_report_fixup: fix potential read out of bounds
  HID: logitech-hidpp: add missing MODULE_DESCRIPTION() macro
  HID: intel-ish-hid: fix endian-conversion
  HID: nintendo: Fix an error handling path in nintendo_hid_probe()
  HID: logitech-dj: Fix memory leak in logi_dj_recv_switch_to_dj_mode()
  HID: core: remove unnecessary WARN_ON() in implement()
  HID: nvidia-shield: Add missing check for input_ff_create_memless
  HID: intel-ish-hid: Fix build error for COMPILE_TEST

Merge tag 'kbuild-fixes-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix the initial state of the save button in 'make gconfig'

 - Improve the Kconfig documentation

 - Fix a Kconfig bug regarding property visibility

 - Fix build breakage for systems where 'sed' is not installed in /bin

 - Fix a false warning about missing MODULE_DESCRIPTION()

* tag 'kbuild-fixes-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  modpost: do not warn about missing MODULE_DESCRIPTION() for vmlinux.o
  kbuild: explicitly run mksysmap as sed script from link-vmlinux.sh
  kconfig: remove wrong expr_trans_bool()
  kconfig: doc: document behavior of 'select' and 'imply' followed by 'if'
  kconfig: doc: fix a typo in the note about 'imply'
  kconfig: gconf: give a proper initial state to the Save button
  kconfig: remove unneeded code for user-supplied values being out of range

Pull media fixes from Mauro Carvalho Chehab:

 - fixes for the new ipu6 driver (and related fixes to mei csi driver)

 - fix a double debugfs remove logic at mgb4 driver

 - a documentation fix

* tag 'media/v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: intel/ipu6: add csi2 port sanity check in notifier bound
  media: intel/ipu6: update the maximum supported csi2 port number to 6
  media: mei: csi: Warn less verbosely of a missing device fwnode
  media: mei: csi: Put the IPU device reference
  media: intel/ipu6: fix the buffer flags caused by wrong parentheses
  media: intel/ipu6: Fix an error handling path in isys_probe()
  media: intel/ipu6: Move isys_remove() close to isys_probe()
  media: intel/ipu6: Fix some redundant resources freeing in ipu6_pci_remove()
  media: Documentation: v4l: Fix ACTIVE route flag
  media: mgb4: Fix double debugfs remove

Pull irq fixes from Ingo Molnar:

 - Fix possible memory leak the riscv-intc irqchip driver load failures

 - Fix boot crash in the sifive-plic irqchip driver caused by recently
   changed boot initialization order

 - Fix race condition in the gic-v3-its irqchip driver

* tag 'irq-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic-v3-its: Fix potential race condition in its_vlpi_prop_update()
  irqchip/sifive-plic: Chain to parent IRQ after handlers are ready
  irqchip/riscv-intc: Prevent memory leak when riscv_intc_init_common() fails

Pull x86 fixes from Ingo Molnar:
 "Miscellaneous fixes:

   - Fix kexec() crash if call depth tracking is enabled

   - Fix SMN reads on inaccessible registers on certain AMD systems"

* tag 'x86-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/amd_nb: Check for invalid SMN reads
  x86/kexec: Fix bug with call depth tracking

Pull perf event fix from Ingo Molnar:
 "Fix race between perf_event_free_task() and perf_event_release_kernel()
  that can result in missed wakeups and hung tasks"

* tag 'perf-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Fix missing wakeup when waiting for context reference

Pull locking doc fix from Ingo Molnar:
 "Fix typos in the kerneldoc of some of the atomic APIs"

* tag 'locking-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/atomic: scripts: fix ${atomic}_sub_and_test() kerneldoc

Merge tag 'mm-hotfixes-stable-2024-06-07-15-24' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "14 hotfixes, 6 of which are cc:stable.

  All except the nilfs2 fix affect MM and all are singletons - see the
  chagelogs for details"

* tag 'mm-hotfixes-stable-2024-06-07-15-24' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  nilfs2: fix nilfs_empty_dir() misjudgment and long loop on I/O errors
  mm: fix xyz_noprof functions calling profiled functions
  codetag: avoid race at alloc_slab_obj_exts
  mm/hugetlb: do not call vma_add_reservation upon ENOMEM
  mm/ksm: fix ksm_zero_pages accounting
  mm/ksm: fix ksm_pages_scanned accounting
  kmsan: do not wipe out origin when doing partial unpoisoning
  vmalloc: check CONFIG_EXECMEM in is_vmalloc_or_module_addr()
  mm: page_alloc: fix highatomic typing in multi-block buddies
  nilfs2: fix potential kernel bug due to lack of writeback flag waiting
  memcg: remove the lockdep assert from __mod_objcg_mlstate()
  mm: arm64: fix the out-of-bounds issue in contpte_clear_young_dirty_ptes
  mm: huge_mm: fix undefined reference to `mthp_stats' for CONFIG_SYSFS=n
  mm: drop the 'anon_' prefix for swap-out mTHP counters

Pull gpio fixes from Bartosz Golaszewski:

 - interrupt handling and Kconfig fixes for gpio-tqmx86

 - add a buffer for storing output values in gpio-tqmx86 as reading back
   the registers always returns the input values

 - add missing MODULE_DESCRIPTION()s to several GPIO drivers

* tag 'gpio-fixes-for-v6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: add missing MODULE_DESCRIPTION() macros
  gpio: tqmx86: fix broken IRQ_TYPE_EDGE_BOTH interrupt type
  gpio: tqmx86: store IRQ trigger type and unmask status separately
  gpio: tqmx86: introduce shadow register for GPIO output value
  gpio: tqmx86: fix typo in Kconfig label

Pull block fixes from Jens Axboe:

 - Fix for null_blk block size validation (Andreas)

 - NVMe pull request via Keith:
      - Use reserved tags for special fabrics operations (Chunguang)
      - Persistent Reservation status masking fix (Weiwen)

* tag 'block-6.10-20240607' of git://git.kernel.dk/linux:
  null_blk: fix validation of block size
  nvme: fix nvme_pr_* status code parsing
  nvme-fabrics: use reserved tag for reg read/write command

Pull io_uring fixes from Jens Axboe:

 - Fix a locking order issue with setting max async thread workers
   (Hagar)

 - Fix for a NULL pointer dereference for failed async flagged requests
   using ring provided buffers. This doesn't affect the current kernel,
   but it does affect older kernels, and is being queued up for 6.10
   just to make the stable process easier (me)

 - Fix for NAPI timeout calculations for how long to busy poll, and
   subsequently how much to sleep post that if a wait timeout is passed
   in (me)

 - Fix for a regression in this release cycle, where we could end up
   using a partially unitialized match value for io-wq (Su)

* tag 'io_uring-6.10-20240607' of git://git.kernel.dk/linux:
  io_uring: fix possible deadlock in io_register_iowq_max_workers()
  io_uring/io-wq: avoid garbage value of 'match' in io_wq_enqueue()
  io_uring/napi: fix timeout calculation
  io_uring: check for non-NULL file pointer in io_file_can_poll()

Pull btrfs fixes from David Sterba:

 - fix handling of folio private changes.

   The private value holds pointer to our extent buffer structure
   representing a metadata range. Release and create of the range was
   not properly synchronized when updating the private bit which ended
   up in double folio_put, leading to all sorts of breakage

 - fix a crash, reported as duplicate key in metadata, but caused by a
   race of fsync and size extending write. Requires prealloc target
   range + fsync and other conditions (log tree state, timing)

 - fix leak of qgroup extent records after transaction abort

* tag 'for-6.10-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: protect folio::private when attaching extent buffer folios
  btrfs: fix leak of qgroup extent records after transaction abort
  btrfs: fix crash on racing fsync and size-extending write into prealloc

Pull nfsd fix from Chuck Lever:

 - Fix an occasional memory overwrite caused by a fix added in 6.10

* tag 'nfsd-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  SUNRPC: Fix loop termination condition in gss_free_in_token_pages()

Pull RISC-V fixes from Palmer Dabbelt:

 - Another fix to avoid allocating pages that overlap with ERR_PTR,
   which manifests on rv32

 - A revert for the badaccess patch I incorrectly picked up an early
   version of

* tag 'riscv-for-linus-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  Revert "riscv: mm: accelerate pagefault when badaccess"
  riscv: fix overlap of allocated page and PTR_ERR

Pull s390 fixes from Alexander Gordeev:

 - Do not create PT_LOAD program header for the kenel image when the
   virtual memory informaton in OS_INFO data is not available. That
   fixes stand-alone dump failures against kernels that do not provide
   the virtual memory informaton

 - Add KVM s390 shared zeropage selftest

* tag 's390-6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  KVM: s390x: selftests: Add shared zeropage test
  s390/crash: Do not use VM info if os_info does not have it

Pull arm64 fixes from Will Deacon:

 - Fix spurious CPU hotplug warning message from SETEND emulation code

 - Fix the build when GCC wasn't inlining our I/O accessor internals

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64/io: add constant-argument check
  arm64: armv8_deprecated: Fix warning in isndep cpuhp starting process

Merge tag 'platform-drivers-x86-v6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:

 -  Default silead touchscreen driver to 10 fingers and drop 10 finger
    setting from all DMI quirks. More of a cleanup then a pure fix, but
    since the DMI quirks always get updated through the fixes branch
    this avoids conflicts.

 -  Kconfig fix for randconfig builds

 -  dell-smbios: Fix wrong token data in sysfs

 -  amd-hsmp: Fix driver poking unsupported hw when loaded manually

* tag 'platform-drivers-x86-v6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86/amd/hsmp: Check HSMP support on AMD family of processors
  platform/x86: dell-smbios: Simplify error handling
  platform/x86: dell-smbios: Fix wrong token data in sysfs
  platform/x86: yt2-1380: add CONFIG_EXTCON dependency
  platform/x86: touchscreen_dmi: Use 2-argument strscpy()
  platform/x86: touchscreen_dmi: Drop "silead,max-fingers" property
  Input: silead - Always support 10 fingers

Pull iommu fixes from Joerg Roedel:
 "Core:

   - Make iommu-dma code recognize 'force_aperture' again

   - Fix for potential NULL-ptr dereference from iommu_sva_bind_device()
     return value

  AMD IOMMU fixes:

   - Fix lockdep splat for invalid wait context

   - Add feature bit check before enabling PPR

   - Make workqueue name fit into buffer

   - Fix memory leak in sysfs code"

* tag 'iommu-fixes-v6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/amd: Fix Invalid wait context issue
  iommu/amd: Check EFR[EPHSup] bit before enabling PPR
  iommu/amd: Fix workqueue name
  iommu: Return right value in iommu_sva_bind_device()
  iommu/dma: Fix domain init
  iommu/amd: Fix sysfs leak in iommu init

Pull ata fix from Niklas Cassel:

 - Fix a regression for the PATA MacIO driver were it would fail to
   probe because of the recent changes of initializing the limits in
   SCSI core

* tag 'ata-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
  ata: pata_macio: Fix max_segment_size with PAGE_SIZE == 64K

Pull drm fixes from Dave Airlie:
 "Weekly fixes: vmwgfx leads the way this week, with minor changes in xe
  and amdgpu and a couple of other small fixes.

  Seems quiet enough.

  xe:
   - Update the LMTT when freeing VF GT config

  amdgpu:
   - Fix shutdown issues on some SMU 13.x platforms
   - Silence some UBSAN flexible array warnings

  panel:
   - sitronix-st7789v: handle of_drm_get_panel_orientation failing
     error

  vmwgfx:
   - filter modes greater than available graphics memory
   - fix 3D vs STDU enable
   - remove STDU logic from mode valid
   - logging fix
   - memcmp pointers fix
   - remove unused struct
   - screen target lifetime fix

  komeda:
   - unused struct removal"

* tag 'drm-fixes-2024-06-07' of https://gitlab.freedesktop.org/drm/kernel:
  drm/vmwgfx: Don't memcmp equivalent pointers
  drm/vmwgfx: remove unused struct 'vmw_stdu_dma'
  drm/vmwgfx: Don't destroy Screen Target when CRTC is enabled but inactive
  drm/vmwgfx: Standardize use of kibibytes when logging
  drm/vmwgfx: Remove STDU logic from generic mode_valid function
  drm/vmwgfx: 3D disabled should not effect STDU memory limits
  drm/vmwgfx: Filter modes which exceed graphics memory
  drm/amdgpu/pptable: Fix UBSAN array-index-out-of-bounds
  drm/amd: Fix shutdown (again) on some SMU v13.0.4/11 platforms
  drm/xe/pf: Update the LMTT when freeing VF GT config
  drm/panel: sitronix-st7789v: Add check for of_drm_get_panel_orientation
  drm/komeda: remove unused struct 'gamma_curve_segment'

At least ASUS Zenbook 14 (2023) and ASUS Zenbook 14 Pro (2023) are affected.

The touchscreen reports a battery status of 0% and jumps to 1% when a
stylus is used.

The device ID was added and the battery ignore quirk was enabled for it.

[jkosina@suse.com: reformatted changelog a bit]
Signed-off-by: Louis Dalibard <ontake@ontake.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

The Elan eKTH5015M touch controller found on the Lenovo ThinkPad X13s
shares the VCC33 supply with other peripherals that may remain powered
during suspend (e.g. when enabled as wakeup sources).

The reset line is also wired so that it can be left deasserted when the
supply is off.

This is important as it avoids holding the controller in reset for
extended periods of time when it remains powered, which can lead to
increased power consumption, and also avoids leaking current through the
X13s reset circuitry during suspend (and after driver unbind).

Use the new 'no-reset-on-power-off' devicetree property to determine
when reset needs to be asserted on power down.

Notably this also avoids wasting power on machine variants without a
touchscreen for which the driver would otherwise exit probe with reset
asserted.

Fixes: bd3cba00 ("HID: i2c-hid: elan: Add support for Elan eKTH6915 i2c-hid touchscreens")
Cc: <stable@vger.kernel.org>	# 6.0
Cc: Douglas Anderson <dianders@chromium.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240507144821.12275-5-johan+linaro@kernel.orgSigned-off-by: Benjamin Tissoires <bentiss@kernel.org>

When the power supply is shared with other peripherals the reset line
can be wired in such a way that it can remain deasserted regardless of
whether the supply is on or not.

This is important as it can be used to avoid holding the controller in
reset for extended periods of time when it remains powered, something
which can lead to increased power consumption. Leaving reset deasserted
also avoids leaking current through the reset circuitry pull-up
resistors.

Add a new 'no-reset-on-power-off' devicetree property which can be used
by the OS to determine when reset needs to be asserted on power down.

Note that this property can also be used when the supply cannot be
turned off by the OS at all.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240507144821.12275-4-johan+linaro@kernel.orgSigned-off-by: Benjamin Tissoires <bentiss@kernel.org>

Add a compatible string for the Elan eKTH5015M touch controller.

Judging from the current binding and commit bd3cba00 ("HID: i2c-hid:
elan: Add support for Elan eKTH6915 i2c-hid touchscreens"), eKTH5015M
appears to be compatible with eKTH6915. Notably the power-on sequence is
the same.

While at it, drop a redundant label from the example.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240507144821.12275-3-johan+linaro@kernel.orgSigned-off-by: Benjamin Tissoires <bentiss@kernel.org>

The Ilitek ILI2901 touch screen controller was apparently incorrectly
added to the Elan eKTH6915 schema simply because it also has a reset
gpio and is currently managed by the Elan driver in Linux.

The two controllers are not related even if an unfortunate wording in
the commit message adding the Ilitek compatible made it sound like they
were.

Add a dedicated schema for the ILI2901 which does not specify the I2C
address (which is likely 0x41 rather than 0x10 as for other Ilitek touch
controllers) to avoid cluttering the Elan schema with unrelated devices
and to make it easier to find the correct schema when adding further
Ilitek controllers.

Fixes: d74ac6f6 ("dt-bindings: HID: i2c-hid: elan: Introduce Ilitek ili2901")
Cc: Zhengqiao Xia <xiazhengqiao@huaqin.corp-partner.google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240507144821.12275-2-johan+linaro@kernel.orgSigned-off-by: Benjamin Tissoires <bentiss@kernel.org>

HUTRR94 added support for a new usage titled "System Do Not Disturb"
which toggles a system-wide Do Not Disturb setting. This commit simply
adds a new event code for the usage.
Signed-off-by: Aseda Aboagye <aaboagye@chromium.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/Zl-gUHE70s7wCAoB@google.comSigned-off-by: Benjamin Tissoires <bentiss@kernel.org>

HUTRR116 added support for a new usage titled "System Accessibility
Binding" which toggles a system-wide bound accessibility UI or command.
This commit simply adds a new event code for the usage.
Signed-off-by: Aseda Aboagye <aaboagye@chromium.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/Zl-e97O9nvudco5z@google.comSigned-off-by: Benjamin Tissoires <bentiss@kernel.org>

syzbot reported a potential read out of bounds in asus_report_fixup.

this patch adds checks so that a read out of bounds will not occur
Signed-off-by: Andrew Ballance <andrewjballance@gmail.com>
Reported-by:   <syzbot+07762f019fd03d01f04c@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=07762f019fd03d01f04c
Fixes: 59d2f5b7 ("HID: asus: fix more n-key report descriptors if n-key quirked")
Link: https://lore.kernel.org/r/20240602085023.1720492-1-andrewjballance@gmail.comSigned-off-by: Benjamin Tissoires <bentiss@kernel.org>