- 07 Jul, 2018 2 commits
-
-
Boris Brezillon authored
Use container_of() instead of type casting so that it keeps working even if base is moved inside the drm_writeback_connector struct. Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by:
Liviu Dudau <liviu.dudau@arm.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180703075022.15138-2-boris.brezillon@bootlin.com
-
Boris Brezillon authored
Fix the bullet list declaration in the overview section. Signed-off-by:
-
- 06 Jul, 2018 7 commits
-
-
Gustavo Padovan authored
Pull in the malidp writeback implementation for further work on writeback in drm-misc-next. Signed-off-by:Gustavo Padovan <gustavo.padovan@collabora.com>
-
Maarten Lankhorst authored
This reduces the amount of spam when you debug a CRC reading program. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> [mlankhorst: Change bool overflow to was_overflow (Ville)] Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180418125121.72081-1-maarten.lankhorst@linux.intel.com
-
Yannick Fertre authored
Reset must be properly assert before deassert. This is important if there is an early boot splash screen before the kernel start up. Signed-off-by:
Yannick Fertre <yannick.fertre@st.com> Reviewed-by:
Philippe Cornu <philippe.cornu@st.com> Tested-by:
Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1530271355-5608-1-git-send-email-yannick.fertre@st.com
-
Yannick Fertre authored
Filter the requested mode pixel clock frequency according to the pad maximum supported frequency. Signed-off-by:
-
Benjamin Gaignard authored
When dumping plane state print normalized zpos value as done for the other plane state fields. Signed-off-by:
-
git://linux-arm.org/linux-ldDave Airlie authored
"mali-dp driver changes for drm-next, includes the driver implementation for writeback, improvements for power management handling in the driver and a debugfs entry for reporting possible internal errors. Please pull at your earliest convenience. Boris Brezillon is also interested in this pull as he is going to change slightly the parameter for the writeback connector's atomic_commit() and he needs to fix the mali-dp driver in his series." Signed-off-by:
Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180705144408.GH15340@e110455-lin.cambridge.arm.com
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for 4.19: UAPI Changes: v3d: add fourcc modicfier for fourcc for the Broadcom UIF format (Eric Anholt) Cross-subsystem Changes: console/fbcon: Add support for deferred console takeover (Hans de Goede) Core Changes: dma-fence clean up, improvements and docs (Daniel Vetter) add mask function for crtc, plane, encoder and connector DRM objects(Ville Syrjälä) Driver Changes: pl111: add Nomadik LCDC variant (Linus Walleij) Signed-off-by:
-
- 05 Jul, 2018 31 commits
-
-
git://people.freedesktop.org/~thomash/linuxDave Airlie authored
A patchset worked out together with Peter Zijlstra. Ingo is OK with taking it through the DRM tree: This is a small fallout from a work to allow batching WW mutex locks and unlocks. Our Wound-Wait mutexes actually don't use the Wound-Wait algorithm but the Wait-Die algorithm. One could perhaps rename those mutexes tree-wide to "Wait-Die mutexes" or "Deadlock Avoidance mutexes". Another approach suggested here is to implement also the "Wound-Wait" algorithm as a per-WW-class choice, as it has advantages in some cases. See for example http://www.mathcs.emory.edu/~cheung/Courses/554/Syllabus/8-recv+serial/deadlock-compare.html Now Wound-Wait is a preemptive algorithm, and the preemption is implemented using a lazy scheme: If a wounded transaction is about to go to sleep on a contended WW mutex, we return -EDEADLK. That is sufficient for deadlock prevention. Since with WW mutexes we also require the aborted transaction to sleep waiting to lock the WW mutex it was aborted on, this choice also provides a suitable WW mutex to sleep on. If we were to return -EDEADLK on the first WW mutex lock after the transaction was wounded whether the WW mutex was contended or not, the transaction might frequently be restarted without a wait, which is far from optimal. Note also that with the lazy preemption scheme, contrary to Wait-Die there will be no rollbacks on lock contention of locks held by a transaction that has completed its locking sequence. The modeset locks are then changed from Wait-Die to Wound-Wait since the typical locking pattern of those locks very well matches the criterion for a substantial reduction in the number of rollbacks. For reservation objects, the benefit is more unclear at this point and they remain using Wait-Die. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linuxDave Airlie authored
omapdrm changes for 4.19 * Workaround for DRA7 errata i932 * Fix mm_list locking * Cleanups Signed-off-by:
-
Ville Syrjälä authored
Using += to set the bits in a mask looks funny. It works in this case because we never set the same bit twice. But let's switch to |= to make this look more regular. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
Eric Anholt <eric@anholt.net>
-
Eric Anholt authored
Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Acked-by:
Daniel Vetter <daniel@ffwll.ch>
-
Eric Anholt authored
This was a failure of "git add" on my part -- we already referenced the doc from drivers.rst. Signed-off-by:
-
Eric Anholt authored
The dma-fence core as of commit 418cc6ca ("dma-fence: Make ->wait callback optional") provides appropriate defaults for these methods. Signed-off-by:
-
Eric Anholt authored
GTF-GLES2.gtf.GL.acos.acos_float_vert_xvary submits jobs that take 4 seconds at maximum resolution, but we still want to reset quickly if a job is really hung. Sample the CL's current address and the return address (since we call into tile lists repeatedly) and if either has changed then assume we've made progress. Signed-off-by:
-
Souptick Joarder authored
Instead of converting an errno into a vm_fault_t ourselves, use vmf_insert_mixed() which returns a vm_fault_t directly. Signed-off-by:
Souptick Joarder <jrdr.linux@gmail.com> Signed-off-by:
Matthew Wilcox <willy@infradead.org>
-
Ayan Kumar Halder authored
malidp_pm_suspend_late checks if the runtime status is not suspended and if so, invokes malidp_runtime_pm_suspend which disables the display engine/core interrupts and the clocks. It sets the runtime status as suspended. The difference between suspend() and suspend_late() is as follows:- 1. suspend() makes the device quiescent. In our case, we invoke the DRM helper which disables the CRTC. This would have invoked runtime pm suspend but the system suspend process disables runtime pm. 2. suspend_late() It continues the suspend operations of the drm device which was started by suspend(). In our case, it performs the same functionality as runtime_suspend(). The complimentary functions are resume() and resume_early(). In the case of resume_early(), we invoke malidp_runtime_pm_resume() which enables the clocks and the interrupts. It sets the runtime status as active. If the device was in runtime suspend mode before system suspend was called, pm_runtime_work() will put the device back in runtime suspended mode( after the complete system has been resumed). Signed-off-by:
Ayan Kumar Halder <ayan.halder@arm.com> Acked-by:
-
Ayan Kumar Halder authored
One needs to store the value of the OUTPUT_DEPTH that one has parsed from device tree, so that it can be restored on system resume. This value is set in the modeset function as this gets reset when the system suspends. Signed-off-by:
-
Ayan Kumar Halder authored
Display and scaling engine interrupts need to be disabled when the runtime pm invokes malidp_runtime_pm_suspend(). Conversely, they need to be enabled in malidp_runtime_pm_resume(). This patch depends on: https://lkml.org/lkml/2017/5/15/695Reported-by:
Alexandru-Cosmin Gheorghe <Alexandru-Cosmin.Gheorghe@arm.com> Signed-off-by:
-
Ayan Kumar Halder authored
Malidp uses two interrupts ie 1. se_irq - used for memory writeback. and 2. de_irq - used for display output. Extract the hardware initialization part from malidp interrupt registration ie (malidp_de_irq_init()/ malidp_se_irq_init()) into a separate function (ie malidp_de_irq_hw_init()/malidp_se_irq_hw_init()) which will be later invoked from runtime_pm_resume function when it needs to re-enable the interrupts. Signed-off-by:
-
Ayan Kumar Halder authored
Malidp uses two interrupts ie 1. se_irq - used for memory writeback. and 2. de_irq - used for display output. 'struct drm_device' is being replaced with 'struct malidp_hw_device' as the function argument. The reason being the dependency of malidp_de_irq_fini on 'struct drm_device' needs to be removed so as to enable it to call from functions which receives 'struct malidp_hw_device' as argument. Furthermore, there is no way to retrieve 'struct drm_device' from 'struct malidp_hw_device'. Signed-off-by:
-
Alexandru Gheorghe authored
Status register contains a lot of bits for reporting internal errors inside Mali DP. Currently, we just silently ignore all of the errors, that doesn't help when we are investigating different bugs, especially on the FPGA models which have a lot of constraints, so we could easily end up in AXI or underrun errors. Add a new file called debug that contains an aggregate of the errors reported by the Mali DP hardware. E.g: [root@alarm ~]# cat /sys/kernel/debug/dri/1/debug [DE] num_errors : 167 [DE] last_error_status : 0x00000001 [DE] last_error_vblank : 385 [SE] num_errors : 3 [SE] last_error_status : 0x00e23001 [SE] last_error_vblank : 201 Changes since v2: - Add lock to protect the errors stats. - Add possibility to reset the error stats by writing anything to the debug file. Signed-off-by:
-
Liviu Dudau authored
Mali DP500 operates in continuous writeback mode (writes frame content until stopped) and it needs special handling in order to behave like a one-shot writeback engine. The original state machine added for DP500 was a bit fragile, as it did not handle correctly cases where a new atomic commit was in progress when the SE IRQ happens and it would commit some partial updates. Improve the handling by adding a parameter to the set_config_valid() function to clear the config valid bit in hardware before starting a new commit and by introducing a MW_RESTART state in the writeback state machine to cater for the case where a new writeback commit gets submitted while the last one is still being active. Reported-by:
Brian Starkey <brian.starkey@arm.com> Reviewed-by:
-
Brian Starkey authored
Mali-DP has a memory writeback engine which can be used to write the composition result to a memory buffer. Expose this functionality as a DRM writeback connector on supported hardware. Changes since v1: Daniel Vetter: - Don't require a modeset when writeback routing changes - Make writeback connector always disconnected Changes since v2: - Rebase onto new drm_writeback_connector - Add reset callback, allocating subclassed state Daniel Vetter: - Squash out-fence support into this commit Gustavo Padovan: - Don't signal fence directly from driver (and drop malidp_mw_job) Changes since v3: - Modifications to fit with Mali-DP commit tail changes Signed-off-by:
Mihail Atanassov <mihail.atanassov@arm.com> Signed-off-by:
-
Liviu Dudau authored
Annotate the pixel format matrix for DP500 with the memory-write flag for formats that are supported by the SE memwrite engine. Reviewed-by:
-
Liviu Dudau authored
Mali DP500 behaves differently from the rest of the Mali DP IP, in that it does not have a one-shot mode and keeps writing the content of the current frame to the provided memory area until stopped. As a way of emulating the one-shot behaviour, we are going to use the CVAL interrupt that is being raised at the start of each frame, during prefetch phase, to act as End-of-Write signal, but with a twist: we are going to disable the memory write engine right after we're notified that it has been enabled, using the knowledge that the bit controlling the enabling will only be acted upon on the next vblank/prefetch. CVAL interrupt will fire durint the next prefetch phase every time the global CVAL bit gets set, so we need a state byte to track the memory write enabling. We also need to pay attention during the disabling of the memory write engine as that requires the CVAL bit to be set in the control register, but we don't want to do that during an atomic commit, as it will write into the hardware a partial state. Reviewed-by:
-
Brian Starkey authored
Add a layer bit for the SE memory-write, and add it to the pixel format matrix for DP550/DP650. Signed-off-by:
-
Liviu Dudau authored
Mali-DP display processors are able to write the composition result to a memory buffer via the SE. Add entry points in the HAL for enabling/disabling this feature, and implement support for it on DP650 and DP550. DP500 acts differently and so is omitted from this change. Changes since v3: - Fix missing vsync interrupt for DP550 Signed-off-by:
-
Ville Syrjälä authored
Use drm_connector_has_possible_encoder() for checking whether the encoder has an associated connector. v2: Replace the drm_for_each_connector_encoder_ids() loop with a simple drm_connector_has_possible_encoder() call Cc: Jyri Sarha <jsarha@ti.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:Jyri Sarha <jsarha@ti.com>
-
Ville Syrjälä authored
Use drm_connector_has_possible_encoder() for checking whether the encoder has an associated connector. v2: Replace the drm_for_each_connector_encoder_ids() loop with a simple drm_connector_has_possible_encoder() call Cc: Rob Clark <robdclark@gmail.com> Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Signed-off-by: -
Ville Syrjälä authored
Add a small helper for checking whether a connector and encoder are associated with each other. Signed-off-by:
-
Ville Syrjälä authored
Use drm_connector_for_each_possible_encoder() for iterating connector->encoder_ids[]. A bit more convenient not having to deal with the implementation details. v2: Replace drm_for_each_connector_encoder_ids() with drm_connector_for_each_possible_encoder() (Daniel) Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: amd-gfx@lists.freedesktop.org Signed-off-by: -
Ville Syrjälä authored
Use drm_connector_for_each_possible_encoder() for iterating connector->encoder_ids[]. A bit more convenient not having to deal with the implementation details. v2: Replace drm_for_each_connector_encoder_ids() with drm_connector_for_each_possible_encoder() (Daniel) v3: Initialize nv_encoder to NULL to shut up gcc/smatch Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: nouveau@lists.freedesktop.org Signed-off-by: -
Ville Syrjälä authored
Use drm_connector_for_each_possible_encoder() for iterating connector->encoder_ids[]. A bit more convenient not having to deal with the implementation details. v2: Replace drm_for_each_connector_encoder_ids() with drm_connector_for_each_possible_encoder() (Daniel) Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: amd-gfx@lists.freedesktop.org Signed-off-by: -
Ville Syrjälä authored
Add a convenience macro for iterating connector->encoder_ids[]. Isolates the users from the implementation details. Note that we don't seem to pass the file_priv down to drm_encoder_find() because encoders apparently don't get leased. No idea why drm_encoder_finc() even takes the file_priv actually. Also use ARRAY_SIZE() when populating the array to avoid spreading knowledge about the array size all over. v2: Hide the drm_encoder_find() in the macro, and rename the macro appropriately (Daniel) v3: Fix kernel docs (Daniel) Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: -
Ville Syrjälä authored
With the fb-helper no longer relying on the non-atomic .best_encoder() we can eliminate the hook from the MST encoder. Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by:
-
Ville Syrjälä authored
Instead of using the .best_encoder() hook to figure out whether a given connector+crtc combo will work, let's instead do what userspace does and just iterate over all the encoders for the connector, and then check each crtc against each encoder's possible_crtcs bitmask. v2: Avoid oopsing on NULL encoders (Daniel) s/connector_crtc_ok/connector_has_possible_crtc/ Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: -
Rodrigo Siqueira authored
Add the following additional information: authors and description in Kconfig. Signed-off-by:
Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Reviewed-by:
Haneen Mohammed <hamohammed.sa@gmail.com> Signed-off-by:
-
Rodrigo Siqueira authored
This commit adds the essential infrastructure for around CRTCs which is composed of: a new data struct for output data information, a function for creating planes, and a simple encoder attached to the connector. Finally, due to the introduction of a new initialization function, connectors were moved from vkms_drv.c to vkms_display.c. Signed-off-by:
-
