- 26 Mar, 2011 9 commits
-
-
Dimitris Papastamos authored
The handling of all snd_soc_x_y_read() functions is similar. Factor it out into a separate function and update all callers. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Dimitris Papastamos authored
The handling of all snd_soc_x_y_write() functions is similar. Factor it out into a separate function and update all functions to use it. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Dimitris Papastamos authored
This is mainly used by the soc-cache code to easily determine the currently used underlying serial bus. Set SND_SOC_CUSTOM to 1 so we can distinguish it if it is not initialized or set. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Dimitris Papastamos authored
As it has become more common to have to write firmware or similar large chunks of data to the hardware, add a function to perform raw bulk writes that bypass the cache. This only handles volatile registers as we should avoid getting out of sync with the actual cache. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Dimitris Papastamos authored
The handling of all snd_soc_x_y_read_i2c() functions is similar. Make a generic I2C read function and update all callers to use it. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Wolfram Sang authored
Checking if IMX_SSI_DMA is set and then set it again is useless. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
-
Wolfram Sang authored
SSI counts in words, the DMA engine in bytes. (Wrong) factor got removed in bf974a0d (ASoC i.MX: switch to new DMA api). Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
-
Wolfram Sang authored
They got accidently removed by f0fba2ad (ASoC: multi-component - ASoC Multi-Component Support). Reintroduce them and get rid of the superfluous defines because the fiq-driver has its own hardcoded values. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
-
- 23 Mar, 2011 1 commit
-
-
Mark Brown authored
This stops code that handles widgets generically from attempting to access registers for these widgets. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Cc: stable@kernel.org
-
- 22 Mar, 2011 5 commits
-
-
Mark Brown authored
DSP2 in the WM8958 can be used to support an upgraded EQ for use in demanding applications. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
-
Mark Brown authored
With appropriate firmware the WM8958 can support Virtual Surround Sound or VSS, widening the stereo audio image for improved user experience. Enable support for this mode of operation when the appropriate firmware can be loaded at runtime. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
-
Mark Brown authored
In preparation for the addition of additional WM8958 algorithms reorganise the code to make it easier to add such support later. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
-
Mark Brown authored
Allow userspace to supply an update to the ROM firmware. The firmware request is non-blocking so userspace can load the firmware at its leisure without delaying startup, the driver will begin using the firmware the next time MBC is started after it has been supplied. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
-
Mark Brown authored
The regulator is optional depending on board design. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
- 18 Mar, 2011 6 commits
-
-
Mark Brown authored
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Mark Brown authored
The DSP2 startup requires that the clock be enable so if we've deferred clock startup we need to defer DSP2 startup Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Mark Brown authored
DSP2 on the WM8958 has a default ROM which provides a multi-band compressor for enhanced performance on mobile devices but can also support runtime download of alternative firmware. In preparation for more exploiting this functionality refactor the code to split the handling of DSP2 into a separate file. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Mark Brown authored
The first WM8958 revision requires similar treatment. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Mark Brown authored
Since not all registers need to be cached and the cache is entirely optional anyway we shouldn't be checking that a register is in the cached range. If the register is invalid then the actual I/O code can determine that and report an error. Similarly, the step size can and should be enforced by the lower level code if it's important. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Mark Brown authored
Merge branch 'topic/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 into for-2.6.39
-
- 16 Mar, 2011 1 commit
-
-
Takashi Iwai authored
Merge branch 'for-2.6.39' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6 into topic/asoc
-
- 11 Mar, 2011 6 commits
-
-
Marek Belisko authored
ASoC audio for mini2440 platform in current kenrel doesn't work. First problem is samsung_asoc_dma device is missing in initialization. Next problem is with codec. Codec is initialized but never probed because no platform_device exist for codec driver. It leads to errors during codec binding to asoc dai. Next problem was platform data which was passed from board to asoc main driver but not passed to codec when called codec_soc_probe(). Following patch should fix issues. But not sure if in correct way. Please review. Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
-
Mark Brown authored
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
-
Vasily Khoruzhick authored
MONO was renamed to MONO1. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
-
Vasily Khoruzhick authored
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Christian Glindkamp authored
This patch adds ASoC support for the MAX9850 codec with headphone amplifier. Supported features: - Playback - 16, 20 and 24 bit audio - 8k - 48k sample rates - DAPM Signed-off-by: Christian Glindkamp <christian.glindkamp@taskit.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Takashi Iwai authored
Added a new API function snd_ctl_activate_id() for activate / inactivate the control element dynamically. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
- 10 Mar, 2011 1 commit
-
-
Mark Brown authored
-
- 09 Mar, 2011 11 commits
-
-
Mark Brown authored
Without this fix the driver won't instantiate properly on relevant devices. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Cc: stable@kernel.org
-
Mark Brown authored
Without this fix the driver won't instantiate properly on relevant devices. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Cc: stable@kernel.org
-
Alexander Sverdlin authored
Enable 192kHz sample rate for EP93xx. Signed-off-by: Alexander Sverdlin <subaparts@yandex.ru> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Alexander Sverdlin authored
Improve EP93xx I2S clocks management. Some freqs values are set not exact as they requested for MCLK and original code was not able to find divisors for SCLK and LRCLK. This code just picks up nearest value from 3 possible variants. This patch makes 44100 and 192000 rates working and fixes capture function (by selecting SCLK/LRCLK=64 where possible). All other rates should work as before. Signed-off-by: Alexander Sverdlin <subaparts@yandex.ru> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Alexander Sverdlin authored
Manage I2S rates according to datasheet for CS4271 CODEC in EDB93xx machine driver. Signed-off-by: Alexander Sverdlin <subaparts@yandex.ru> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Alexander Sverdlin authored
Manage mode and rate bits correctly, according to datasheet in CS4271 CODEC. This is done to make capture work properly. Signed-off-by: Alexander Sverdlin <subaparts@yandex.ru> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
Conflicts: sound/soc/codecs/wm8978.c sound/soc/soc-dapm.c
-
Mark Brown authored
We're not only prefixing all controls, we're also prefixing the widget names in the runtime data. This causes us to add the prefix twice - once when using the widget name to generate the control name and once when adding the control. Really we shouldn't be prefixing the widget names at all, the matching code should be handing this as we always know which DAPM context a widget came from and always display the widget name in terms of a DAPM context. However, we're quite close to the merge window and that's relatively invasive. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reported-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com>
-
Mark Brown authored
Now we've got multi-component we need to make sure that the DAPM context (and hence register I/O context) we use to apply the pending updates at the end of a DAPM sequence is the one we were processing rather than the one that was used to initate the state change. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Mark Brown authored
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Cc: stable@kernel.org
-
Mark Brown authored
Now we have a register write minimisation code in DAPM we don't need to worry about the ordering of the enable and disable of the PGA and the output stage. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-