- 29 Jul, 2024 38 commits
-
-
Nuno Sa authored
If there's only one possible scale, there's no way to change the Vref select in the device so avoid reading the register in ad9467_get_scale(). In this case, it makes no sense to provide the .read_available() callback nor allowing for writing the scale attribute. Note this is in preparation for supporting a new device that only has one possible scale. Signed-off-by:
Nuno Sa <nuno.sa@analog.com> Link: https://patch.msgid.link/20240704-dev-iio-ad9467-new-devs-v1-3-f1adfee921f7@analog.comSigned-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Nuno Sa authored
Add new variables to the per chip info structure: * test_points: Number of valid test points for calibration; * has_dco_invert: Supports inverting DCO (Data clock output) polarity; * dco_en: Specicic mask to enable DCO delays. This is in preparation for supporting new parts with subtle differences in how to configure the hardware. Note that with the new test_points variable, we also add a new calib_map_size to 'struct ad9467_state' so we know our map size depending on how many test points we have and if we can run the calibration in the inverted state or not. Signed-off-by:
-
Nuno Sa authored
The calibration process mixes the support for calibrating multiple channels with only having one channel. Some paths do have 'num_channels' into account while others don't. As of now, the driver only supports devices with one channel so the above is not really a problem. That said, we'll add support for devices with more than one channel, hence let's properly make the calibration process to work with it. Signed-off-by:
-
Krzysztof Kozlowski authored
Allocate the memory with scoped/cleanup.h to reduce error handling and make the code a bit simpler. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
Oleksij Rempel <o.rempel@pengutronix.de> Link: https://patch.msgid.link/20240705-cleanup-h-iio-v1-5-77114c7e84c5@linaro.orgSigned-off-by:
-
Krzysztof Kozlowski authored
Allocate the memory with scoped/cleanup.h to reduce error handling and make the code a bit simpler. Signed-off-by:
-
Krzysztof Kozlowski authored
Allocate the memory with scoped/cleanup.h to reduce error handling and make the code a bit simpler. Signed-off-by:
-
Krzysztof Kozlowski authored
Allocate the memory with scoped/cleanup.h to reduce error handling and make the code a bit simpler. Signed-off-by:
-
Krzysztof Kozlowski authored
Allocate the memory with scoped/cleanup.h to reduce error handling and make the code a bit simpler. Signed-off-by:
-
Javier Carrasco authored
`bmp280_regmap_bus` and `bmp380_regmap_bus` are conditionally assigned to `bmp_regmap_bus`, which is only used to pass the struct as a read-only member. Add the const modifier to the structs and the pointer to move the data to a read-only section. Signed-off-by:
Javier Carrasco <javier.carrasco.cruz@gmail.com> Tested-By:
Vasileios Amoiridis <vassilisamir@gmail.com> Link: https://patch.msgid.link/20240703-iio-cont-regmap_bus-v1-10-34754f355b65@gmail.comSigned-off-by:
-
Javier Carrasco authored
`gp2ap002_regmap_bus` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by:
-
Javier Carrasco authored
`bno055_ser_regmap_bus` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by:
-
Javier Carrasco authored
`bmi323_regmap_bus` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by:
-
Javier Carrasco authored
`ltc2688_regmap_bus` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by:
-
Javier Carrasco authored
`bme680_regmap_bus` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by:
-
Javier Carrasco authored
`ad7091r8_regmap_bus` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by:
Marcelo Schmitt <marcelo.schmitt@analog.com> Reviewed-by:
-
Javier Carrasco authored
`bmi088_regmap_bus` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by:
-
Javier Carrasco authored
`bma400_regmap_bus` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by:
-
Javier Carrasco authored
`adxl367_spi_regmap_bus` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by:
-
Nuno Sa authored
Use iio_for_each_active_channel() to iterate over active channels accessing '.masklength' so it can be annotated as __private when there are no more direct users of it. Signed-off-by:
Alexandru Ardelean <aardelean@baylibre.com> Link: https://patch.msgid.link/20240702-dev-iio-masklength-private-v1-20-98193bf536a6@analog.comSigned-off-by:
-
Nuno Sa authored
Use iio_for_each_active_channel() to iterate over active channels accessing '.masklength' so it can be annotated as __private when there are no more direct users of it. Signed-off-by:
-
Nuno Sa authored
Use iio_for_each_active_channel() to iterate over active channels accessing '.masklength' so it can be annotated as __private when there are no more direct users of it. Signed-off-by:
-
Nuno Sa authored
Make use of iio_get_masklength) and iio_for_each_active_channel() to access '.masklength' so it can be annotated as __private when there are no more direct users of it. Signed-off-by:
-
Nuno Sa authored
Use iio_get_masklength() to access '.masklength' so it can be annotated as __private when there are no more direct users of it. Signed-off-by:
-
Nuno Sa authored
Use iio_get_masklength() to access '.masklength' so it can be annotated as __private when there are no more direct users of it. Signed-off-by:
-
Nuno Sa authored
Use iio_get_masklength() to access '.masklength' so it can be annotated as __private when there are no more direct users of it. Signed-off-by:
-
Nuno Sa authored
Use iio_for_each_active_channel() to iterate over active channels accessing '.masklength' so it can be annotated as __private when there are no more direct users of it. Signed-off-by:
-
Nuno Sa authored
Use iio_for_each_active_channel() to iterate over active channels accessing '.masklength' so it can be annotated as __private when there are no more direct users of it. Signed-off-by:
-
Nuno Sa authored
Use iio_for_each_active_channel() to iterate over active channels accessing '.masklength' so it can be annotated as __private when there are no more direct users of it. Signed-off-by:
-
Nuno Sa authored
Use iio_for_each_active_channel() to iterate over active channels accessing '.masklength' so it can be annotated as __private when there are no more direct users of it. Signed-off-by:
-
Nuno Sa authored
Use iio_for_each_active_channel() to iterate over active channels accessing '.masklength' so it can be annotated as __private when there are no more direct users of it. Signed-off-by:
-
Nuno Sa authored
Ue iio_get_masklength() to access '.masklength' so it can be annotated as __private when there are no more direct users of it. Signed-off-by:
-
Nuno Sa authored
Use iio_for_each_active_channel() to iterate over active channels accessing '.masklength' so it can be annotated as __private when there are no more direct users of it. Signed-off-by:
-
Nuno Sa authored
Use iio_for_each_active_channel() to iterate over active channels accessing '.masklength' so it can be annotated as __private when there are no more direct users of it. Signed-off-by:
-
Nuno Sa authored
Use iio_get_masklength() to access '.masklength' so it can be annotated as __private when there are no more direct users of it. Signed-off-by:
-
Nuno Sa authored
Use iio_get_masklength() to access '.masklength' so it can be annotated as __private when there are no more direct users of it. Signed-off-by:
-
Nuno Sa authored
Use iio_get_masklength() to access '.masklength' so it can be annotated as __private when there are no more direct users of it. While at it, remove some unneeded line breaks. Signed-off-by:
-
Nuno Sa authored
Use iio_get_masklength() to access '.masklength' so it can be annotated as __private when there are no more direct users of it. Signed-off-by:
-
Nuno Sa authored
'masklength' is supposed to be an IIO private member. However, drivers (often in trigger handlers) need to access it to iterate over the enabled channels for example (there are other reasons). Hence, a couple of new accessors are being added: * iio_for_each_active_channel() - Iterates over the active channels; * iio_get_masklength() - Get length of the channels mask. The goal of these new accessors is to annotate 'masklength' as private as soon as all drivers accessing it are converted to use the new helpers. Signed-off-by:
-
- 28 Jul, 2024 2 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix RPM package build error caused by an incorrect locale setup - Mark modules.weakdep as ghost in RPM package - Fix the odd combination of -S and -c in stack protector scripts, which is an error with the latest Clang * tag 'kbuild-fixes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: Fix '-S -c' in x86 stack protector scripts kbuild: rpm-pkg: ghost modules.weakdep file kbuild: rpm-pkg: Fix C locale setup
-
