- 17 Jul, 2020 19 commits
-
-
Lad Prabhakar authored
Add the device nodes for RZ/G2H SCIF and HSCIF serial ports, including clocks, power domains and DMAs. Signed-off-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by:
Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Link: https://lore.kernel.org/r/1594811350-14066-10-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.comSigned-off-by:
Geert Uytterhoeven <geert+renesas@glider.be>
-
Marian-Cristian Rotariu authored
This patch adds TMU[01234] device tree nodes to the r8a774e1 SoC specific DT. Signed-off-by:
-
Marian-Cristian Rotariu authored
This patch adds the CMT[0123] device tree nodes to the r8a774e1 SoC specific DT. Signed-off-by:
-
Marian-Cristian Rotariu authored
Add thermal support for R8A774E1 (RZ/G2H) SoC. Based on the work done for r8a774a1 SoC. Signed-off-by:
-
Marian-Cristian Rotariu authored
The RZ/G2H (r8a774e1) comes with two clusters of processors, similarly to the r8a774a1. The first cluster is made of A57s, the second cluster is made of A53s. The operating points for the cluster with the A57s are: Frequency | Voltage ----------|--------- 500 MHz | 0.82V 1.0 GHz | 0.82V 1.5 GHz | 0.82V The operating points for the cluster with the A53s are: Frequency | Voltage ----------|--------- 800 MHz | 0.82V 1.0 GHz | 0.82V 1.2 GHz | 0.82V This patch adds the definitions for the operating points to the SoC specific DT. Signed-off-by:
-
Adam Ford authored
Beacon EmebeddedWorks, formerly Logic PD is introducing a new SOM and development kit based on the RZ/G2M SoC from Renesas. The SOM supports eMMC, WiFi and Bluetooth, along with a Cat-M1 cellular radio. The Baseboard has Ethernet, USB, HDMI, stereo audio in and out, along with a variety of push buttons and LED's, and support for a parallel RGB and an LVDS display. Signed-off-by:
Adam Ford <aford173@gmail.com> Link: https://lore.kernel.org/r/20200715140622.1295370-1-aford173@gmail.comSigned-off-by:
-
Marian-Cristian Rotariu authored
This patch adds the SoC specific part of the Ethernet AVB device tree node. Signed-off-by:
-
Marian-Cristian Rotariu authored
Add GPIO device nodes to the DT of the r8a774e1 SoC. Signed-off-by:
-
Marian-Cristian Rotariu authored
Add sys-dmac[0-2] device nodes for RZ/G2H (R8A774E1) SoC. Signed-off-by:
-
Marian-Cristian Rotariu authored
Add RZ/G2H (R8A774E1) IPMMU nodes. Signed-off-by:
-
Niklas Söderlund authored
When adding the adv7612 device node the ports node was misspelled as port, fix this. Fixes: bc63cd87 ("ARM: dts: gose: add HDMI input") Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20200713111016.523189-1-niklas.soderlund+renesas@ragnatech.seSigned-off-by:
-
Yoshihiro Shimoda authored
Fix the device node names as "mmc@". Fixes: 66474697 ("ARM: dts: r7s72100: add sdhi to device tree") Fixes: a49f76cd ("ARM: dts: r7s9210: Add SDHI support") Fixes: 43304a5f ("ARM: shmobile: r8a73a4: tidyup DT node naming") Fixes: 7d907894 ("ARM: shmobile: r8a7740: tidyup DT node naming") Fixes: 3ab2ea5f ("ARM: dts: r8a7742: Add SDHI nodes") Fixes: 63ce8a61 ("ARM: dts: r8a7743: Add SDHI controllers") Fixes: b591e323 ("ARM: dts: r8a7744: Add SDHI nodes") Fixes: d83010f8 ("ARM: dts: r8a7744: Initial SoC device tree") Fixes: 7079131e ("ARM: dts: r8a7745: Add SDHI controllers") Fixes: 0485da78 ("ARM: dts: r8a77470: Add SDHI1 support") Fixes: 15aa5a95 ("ARM: dts: r8a77470: Add SDHI0 support") Fixes: f068cc81 ("ARM: dts: r8a77470: Add SDHI2 support") Fixes: 14e1d914 ("ARM: shmobile: r8a7778: tidyup DT node naming") Fixes: 2624705c ("ARM: shmobile: r8a7779: tidyup DT node naming") Fixes: b718aa44 ("ARM: shmobile: r8a7790: tidyup DT node naming") Fixes: b7ed8a0d ("ARM: shmobile: Add SDHI devices to r8a7791 DTSI") Fixes: ce01b14e ("ARM: dts: r8a7792: add SDHI support") Fixes: fc9ee228 ("ARM: dts: r8a7793: Add SDHI controllers") Fixes: b8e8ea12 ("ARM: shmobile: r8a7794: add SDHI DT support") Fixes: 33f6be3b ("ARM: shmobile: sh73a0: tidyup DT node naming") Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1594382936-14114-1-git-send-email-yoshihiro.shimoda.uh@renesas.comSigned-off-by:
-
Yoshihiro Shimoda authored
Fix the device node names as "mmc@". Fixes: 663386c3 ("arm64: dts: renesas: r8a774a1: Add SDHI nodes") Fixes: 9b33e300 ("arm64: dts: renesas: Initial r8a774b1 SoC device tree") Fixes: 77223211 ("arm64: dts: renesas: r8a774c0: Add SDHI nodes") Fixes: d9d67010 ("arm64: dts: r8a7795: Add SDHI support to dtsi") Fixes: a513cf1e ("arm64: dts: r8a7796: add SDHI nodes") Fixes: 111cc9ac ("arm64: dts: renesas: r8a77961: Add SDHI nodes") Fixes: f51746ad ("arm64: dts: renesas: Add Renesas R8A77961 SoC support") Fixes: df863d6f ("arm64: dts: renesas: initial R8A77965 SoC device tree") Fixes: 9aa3558a ("arm64: dts: renesas: ebisu: Add and enable SDHI device nodes") Fixes: 83f18749 ("arm64: dts: renesas: r8a77995: Add SDHI (MMC) support") Signed-off-by:
-
Yoshihiro Shimoda authored
Add full-pwr-cycle-in-suspend property to do a graceful shutdown of the eMMC device in system suspend. Signed-off-by:
-
Marian-Cristian Rotariu authored
The HiHope RZ/G2H sub board sits below the HiHope RZ/G2H main board. These boards are identical with the ones for RZ/G2M[N]. Signed-off-by:
-
Marian-Cristian Rotariu authored
Basic support for the HiHope RZ/G2H main board: - Memory, - Main crystal, - Serial console - eMMC Signed-off-by:
-
Marian-Cristian Rotariu authored
Basic support for the RZ/G2H SoC. Signed-off-by:
-
Marian-Cristian Rotariu authored
Enable the Renesas RZ/G2H (R8A774E1) SoC in the ARM64 defconfig. Signed-off-by:
-
Geert Uytterhoeven authored
Renesas RZ/G2H DT Binding Definitions Clock and Power Domain definitions for the Renesas RZ/G2H (R8A774E1) SoC, shared by driver and DT source files.
-
- 16 Jul, 2020 4 commits
-
-
Geert Uytterhoeven authored
Make the Makefile for building Renesas DTB files easier to read and maintain: - Get rid of line continuations, - Use a single entry per line, - Sort SoCs and boards alphabetically, - Separate SoCs by blank lines. Signed-off-by:
-
Geert Uytterhoeven authored
The PHY mode already defaults to RGMII in the RZ/G2E base SoC DTS file, so there is no need to specify the same value in board files. Fixes: 6b170cd3 ("arm64: dts: renesas: cat875: Add ethernet support") Signed-off-by:
-
Niklas Söderlund authored
The remote property is never read by the driver, remove it. Signed-off-by:
-
Niklas Söderlund authored
When adding the adv7180 device node the ports node was misspelled as port, fix this. Fixes: 8cae3590 ("ARM: dts: gose: add composite video input") Signed-off-by:
-
- 13 Jul, 2020 6 commits
-
-
Sergei Shtylyov authored
Define the Eagle/V3MSK board dependent parts of the RPC-IF device node. Add device nodes for Spansion S25FS512S SPI flash and MTD partitions on it. Based on the original patches by Dmitry Shifrin. Signed-off-by:
Dmitry Shifrin <dmitry.shifrin@cogentembedded.com> Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Link: https://lore.kernel.org/r/fca1d012-29bf-eead-1c0d-4dd837c0bc68@cogentembedded.comSigned-off-by:
-
Sergei Shtylyov authored
Describe RPC-IF in the R8A77970 device tree. Signed-off-by:
-
Sergei Shtylyov authored
Define the Condor/V3HSK board dependent parts of the RPC-IF device node. Add device nodes for Spansion S25FS512S SPI flash and MTD partitions on it. Based on the original patches by Dmitry Shifrin. Signed-off-by:
-
Sergei Shtylyov authored
Describe RPC-IF in the R8A77980 device tree. Signed-off-by:
-
Marian-Cristian Rotariu authored
Add all RZ/G2H Clock Pulse Generator Core Clock Outputs, as listed in Table 11.2 ("List of Clocks [RZ/G2H]") of the RZ/G2H Hardware User's Manual. Signed-off-by: -
Marian-Cristian Rotariu authored
This patch adds power domain indices for the RZ/G2H (r8a774e1) SoC. Signed-off-by:
-
- 29 Jun, 2020 1 commit
-
-
Ulrich Hecht authored
Make use of the IRLM setup feature in the renesas-intc-irqpin driver. Signed-off-by:
Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Tested-by:
Simon Horman <horms+renesas@verge.net.au> Link: https://lore.kernel.org/r/1441726946-30131-3-git-send-email-ulrich.hecht+renesas@gmail.comSigned-off-by:
-
- 26 Jun, 2020 10 commits
-
-
Lad Prabhakar authored
The HiHope RZ/G2N variants are advertised as compatible with panel idk-1110wr from Advantech, however the panel isn't sold alongside the board. New dts's, enabling the lvds node to get the panel to work with all the HiHope RZ/G2N variants. Signed-off-by:
-
Lad Prabhakar authored
The HiHope RZ/G2N sub board sits below the HiHope RZ/G2N Rev.3.0/4.0 main board. Signed-off-by:
-
Lad Prabhakar authored
Add support for HiHope RZ/G2N Rev.3.0/4.0 main board support based on r8a774b1 SoC. Signed-off-by:
-
Lad Prabhakar authored
Add support for idk-1110wr display as similarly done for Rev.2.0 Signed-off-by:
-
Lad Prabhakar authored
Separate out LVDS specific nodes into common file hihope-rzg2-ex-lvds.dtsi so that this can be re-used by RZ/G2M[N] variants. Signed-off-by:
-
Lad Prabhakar authored
The HiHope RZ/G2M sub board sits below the HiHope RZ/G2M Rev.3.0/4.0 main board. Signed-off-by:
-
Lad Prabhakar authored
Add support for HiHope RZ/G2M Rev.3.0/4.0 main board support based on r8a774a1 SoC. Signed-off-by:
-
Lad Prabhakar authored
Rev.3.0 and Rev.4.0 are identical and can be identified by using GP5_19 and GP5_21. Rev GP5_19 GP5_21 ============================== Rev.3.0 0 0 Rev.4.0 0 1 This patch creates hihope-rev4.dtsi file with Rev.3.0/4.0 specific changes for HopeRun HiHope RZ/G2M[N] boards. Signed-off-by:
-
Lad Prabhakar authored
Separate out Rev.2.0 specific hardware changes into hihope-rev2.dtsi file so that hihope-common.dtsi can be used by all the variants for RZ/G2M[N] boards. LED node names have been updated according to Rev.4.0 schematics. Signed-off-by:
-
Lad Prabhakar authored
The existing DTS files for HiHope RZ/G2N boards are for Rev.2.0 version so reflect the same for the DTS file names so that the existing naming convention can be used for Rev.3.0/4.0 boards. Signed-off-by:
-
