- 11 Aug, 2017 16 commits
-
-
Mel Gorman authored
commit 3ea27719 upstream. Nadav Amit identified a theoritical race between page reclaim and mprotect due to TLB flushes being batched outside of the PTL being held. He described the race as follows: CPU0 CPU1 ---- ---- user accesses memory using RW PTE [PTE now cached in TLB] try_to_unmap_one() ==> ptep_get_and_clear() ==> set_tlb_ubc_flush_pending() mprotect(addr, PROT_READ) ==> change_pte_range() ==> [ PTE non-present - no flush ] user writes using cached RW PTE ... try_to_unmap_flush() The same type of race exists for reads when protecting for PROT_NONE and also exists for operations that can leave an old TLB entry behind such as munmap, mremap and madvise. For some operations like mprotect, it's not necessarily a data integrity issue but it is a correctness issue as there is a window where an mprotect that limits access still allows access. For munmap, it's potentially a data integrity issue although the race is massive as an munmap, mmap and return to userspace must all complete between the window when reclaim drops the PTL and flushes the TLB. However, it's theoritically possible so handle this issue by flushing the mm if reclaim is potentially currently batching TLB flushes. Other instances where a flush is required for a present pte should be ok as either the page lock is held preventing parallel reclaim or a page reference count is elevated preventing a parallel free leading to corruption. In the case of page_mkclean there isn't an obvious path that userspace could take advantage of without using the operations that are guarded by this patch. Other users such as gup as a race with reclaim looks just at PTEs. huge page variants should be ok as they don't race with reclaim. mincore only looks at PTEs. userfault also should be ok as if a parallel reclaim takes place, it will either fault the page back in or read some of the data before the flush occurs triggering a fault. Note that a variant of this patch was acked by Andy Lutomirski but this was for the x86 parts on top of his PCID work which didn't make the 4.13 merge window as expected. His ack is dropped from this version and there will be a follow-on patch on top of PCID that will include his ack. [akpm@linux-foundation.org: tweak comments] [akpm@linux-foundation.org: fix spello] Link: http://lkml.kernel.org/r/20170717155523.emckq2esjro6hf3z@suse.deReported-by:
Nadav Amit <nadav.amit@gmail.com> Signed-off-by:
Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David Woods authored
commit 852ff5fe upstream. Using the device_property interfaces allows the dw_mmc driver to work on platforms which run on either device tree or ACPI. Signed-off-by:
David Woods <dwoods@mellanox.com> Reviewed-by:
Chris Metcalf <cmetcalf@mellanox.com> Acked-by:
Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
David Woods authored
commit 73a47a9b upstream. Using the device_property interfaces allows mmc drivers to work on platforms which run on either device tree or ACPI. Signed-off-by:
-
Ludovic Desroches authored
commit 7a1e3f14 upstream. When the device is non removable, the card detect signal is often used for another purpose i.e. muxed to another SoC peripheral or used as a GPIO. It could lead to wrong behaviors depending the default value of this signal if not muxed to the SDHCI controller. Fixes: bb5f8ea4 ("mmc: sdhci-of-at91: introduce driver for the Atmel SDMMC") Signed-off-by:
Ludovic Desroches <ludovic.desroches@microchip.com> Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
-
Trond Myklebust authored
commit fd40559c upstream. The verifier is allocated on the stack, but the EXCHANGE_ID RPC call was changed to be asynchronous by commit 8d89bd70. If we interrrupt the call to rpc_wait_for_completion_task(), we can therefore end up transmitting random stack contents in lieu of the verifier. Fixes: 8d89bd70 ("NFS setup async exchange_id") Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Arend Van Spriel authored
commit 5f5d0314 upstream. Due to a bugfix in wireless tree and the commit mentioned below a merge was needed which went haywire. So the submitted change resulted in the function brcmf_sdiod_sgtable_alloc() being called twice during the probe thus leaking the memory of the first call. Fixes: 4d792895 ("brcmfmac: switch to new platform data") Reported-by:
Stefan Wahren <stefan.wahren@i2se.com> Tested-by:
Hante Meuleman <hante.meuleman@broadcom.com> Signed-off-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Emmanuel Grumbach authored
commit 0b0f934e upstream. iwlagn_check_ratid_empty takes the tid as a parameter, but it doesn't check that it is not IWL_TID_NON_QOS. Since IWL_TID_NON_QOS = 8 and iwl_priv::tid_data is an array with 8 entries, accessing iwl_priv::tid_data[IWL_TID_NON_QOS] is a bad idea. This happened in iwlagn_rx_reply_tx. Since iwlagn_check_ratid_empty is relevant only to check whether we can open A-MPDU, this flow is irrelevant if tid is IWL_TID_NON_QOS. Call iwlagn_check_ratid_empty only inside the if (tid != IWL_TID_NON_QOS) a few lines earlier in the function. Reported-by:
Seraphime Kirkovski <kirkseraph@gmail.com> Tested-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Tejun Heo authored
commit 5c0338c6 upstream. The combination of WQ_UNBOUND and max_active == 1 used to imply ordered execution. After NUMA affinity 4c16bd32 ("workqueue: implement NUMA affinity for unbound workqueues"), this is no longer true due to per-node worker pools. While the right way to create an ordered workqueue is alloc_ordered_workqueue(), the documentation has been misleading for a long time and people do use WQ_UNBOUND and max_active == 1 for ordered workqueues which can lead to subtle bugs which are very difficult to trigger. It's unlikely that we'd see noticeable performance impact by enforcing ordering on WQ_UNBOUND / max_active == 1 workqueues. Let's automatically set __WQ_ORDERED for those workqueues. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Christoph Hellwig <hch@infradead.org> Reported-by:
Alexei Potashnik <alexei@purestorage.com> Fixes: 4c16bd32 ("workqueue: implement NUMA affinity for unbound workqueues") Signed-off-by:
-
Dan Carpenter authored
commit 59a5e266 upstream. My static checker complains that "devno" can be negative, meaning that we read before the start of the loop. I've looked at the code, and I think the warning is right. This come from /proc so it's root only or it would be quite a quite a serious bug. The call tree looks like this: proc_scsi_write() <- gets id and channel from simple_strtoul() -> scsi_add_single_device() <- calls shost->transportt->user_scan() -> ata_scsi_user_scan() -> ata_find_dev() Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Tejun Heo authored
commit 3c745417 upstream. While refactoring, f7b2814b ("cgroup: factor out cgroup_{apply|finalize}_control() from cgroup_subtree_control_write()") broke error return value from the function. The return value from the last operation is always overridden to zero. Fix it. Signed-off-by:
-
Tejun Heo authored
commit 7af608e4 upstream. On subsystem registration, css_populate_dir() is not called on the new root css, so the interface files for the subsystem on cgrp_dfl_root aren't created on registration. This is a residue from the days when cgrp_dfl_root was used only as the parking spot for unused subsystems, which no longer is true as it's used as the root for cgroup2. This is often fine as later operations tend to create them as a part of mount (cgroup1) or subtree_control operations (cgroup2); however, it's not difficult to mount cgroup2 with the controller interface files missing as Waiman found out. Fix it by invoking css_populate_dir() on the root css on subsys registration. Signed-off-by:
Waiman Long <longman@redhat.com> Signed-off-by:
-
Tejun Heo authored
commit 61046727 upstream. Subsystem migration methods shouldn't be called for empty migrations. cgroup_migrate_execute() implements this guarantee by bailing early if there are no source css_sets. This used to be correct before a79a908f ("cgroup: introduce cgroup namespaces"), but no longer since the commit because css_sets can stay pinned without tasks in them. This caused cgroup_migrate_execute() call into cpuset migration methods with an empty cgroup_taskset. cpuset migration methods correctly assume that cgroup_taskset_first() never returns NULL; however, due to the bug, it can, leading to the following oops. Unable to handle kernel paging request for data at address 0x00000960 Faulting instruction address: 0xc0000000001d6868 Oops: Kernel access of bad area, sig: 11 [#1] ... CPU: 14 PID: 16947 Comm: kworker/14:0 Tainted: G W 4.12.0-rc4-next-20170609 #2 Workqueue: events cpuset_hotplug_workfn task: c00000000ca60580 task.stack: c00000000c728000 NIP: c0000000001d6868 LR: c0000000001d6858 CTR: c0000000001d6810 REGS: c00000000c72b720 TRAP: 0300 Tainted: GW (4.12.0-rc4-next-20170609) MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 44722422 XER: 20000000 CFAR: c000000000008710 DAR: 0000000000000960 DSISR: 40000000 SOFTE: 1 GPR00: c0000000001d6858 c00000000c72b9a0 c000000001536e00 0000000000000000 GPR04: c00000000c72b9c0 0000000000000000 c00000000c72bad0 c000000766367678 GPR08: c000000766366d10 c00000000c72b958 c000000001736e00 0000000000000000 GPR12: c0000000001d6810 c00000000e749300 c000000000123ef8 c000000775af4180 GPR16: 0000000000000000 0000000000000000 c00000075480e9c0 c00000075480e9e0 GPR20: c00000075480e8c0 0000000000000001 0000000000000000 c00000000c72ba20 GPR24: c00000000c72baa0 c00000000c72bac0 c000000001407248 c00000000c72ba20 GPR28: c00000000141fc80 c00000000c72bac0 c00000000c6bc790 0000000000000000 NIP [c0000000001d6868] cpuset_can_attach+0x58/0x1b0 LR [c0000000001d6858] cpuset_can_attach+0x48/0x1b0 Call Trace: [c00000000c72b9a0] [c0000000001d6858] cpuset_can_attach+0x48/0x1b0 (unreliable) [c00000000c72ba00] [c0000000001cbe80] cgroup_migrate_execute+0xb0/0x450 [c00000000c72ba80] [c0000000001d3754] cgroup_transfer_tasks+0x1c4/0x360 [c00000000c72bba0] [c0000000001d923c] cpuset_hotplug_workfn+0x86c/0xa20 [c00000000c72bca0] [c00000000011aa44] process_one_work+0x1e4/0x580 [c00000000c72bd30] [c00000000011ae78] worker_thread+0x98/0x5c0 [c00000000c72bdc0] [c000000000124058] kthread+0x168/0x1b0 [c00000000c72be30] [c00000000000b2e8] ret_from_kernel_thread+0x5c/0x74 Instruction dump: f821ffa1 7c7d1b78 60000000 60000000 38810020 7fa3eb78 3f42ffed 4bff4c25 60000000 3b5a0448 3d420020 eb610020 <e9230960> 7f43d378 e9290000 f92af200 ---[ end trace dcaaf98fb36d9e64 ]--- This patch fixes the bug by adding an explicit nr_tasks counter to cgroup_taskset and skipping calling the migration methods if the counter is zero. While at it, remove the now spurious check on no source css_sets. Signed-off-by:
Abdul Haleem <abdhalee@linux.vnet.ibm.com> Cc: Roman Gushchin <guro@fb.com> Fixes: a79a908f ("cgroup: introduce cgroup namespaces") Link: http://lkml.kernel.org/r/1497266622.15415.39.camel@abdul.in.ibm.comSigned-off-by:
-
Hans de Goede authored
commit dd242a08 upstream. At least on the UP board SBC both PWMs are enabled leading to us trying to add the same pwm_lookup twice, which leads to the following: [ 0.902224] list_add double add: new=ffffffffb8efd400, prev=ffffffffb8efd400, next=ffffffffb8eeede0. [ 0.912466] ------------[ cut here ]------------ [ 0.917624] kernel BUG at lib/list_debug.c:31! [ 0.922588] invalid opcode: 0000 [#1] SMP ... [ 1.027450] Call Trace: [ 1.030185] pwm_add_table+0x4c/0x90 [ 1.034181] bsw_pwm_setup+0x1a/0x20 [ 1.038175] acpi_lpss_create_device+0xfe/0x420 ... This commit fixes this by only calling pwm_add_table() for the first PWM controller (which is the one used for the backlight). Link: https://bugzilla.redhat.com/show_bug.cgi?id=1458599 Fixes: bf7696a1 (acpi: lpss: call pwm_add_table() for BSW...) Fixes: 04434ab5 (ACPI / LPSS: Call pwm_add_table() for Bay Trail...) Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Arnd Bergmann authored
commit cd069bb9 upstream. When LPFC is built-in but NVMe is a loadable module, we fail to link the kernel: drivers/scsi/built-in.o: In function `lpfc_nvme_create_localport': (.text+0x156a82): undefined reference to `nvme_fc_register_localport' drivers/scsi/built-in.o: In function `lpfc_nvme_destroy_localport': (.text+0x156eaa): undefined reference to `nvme_fc_unregister_remoteport' We can avoid this either by forcing lpfc to be a module, or by disabling NVMe support in this case. This implements the former. Fixes: 7d708033 ("scsi: lpfc: Finalize Kconfig options for nvme") Link: https://patchwork.kernel.org/patch/9636569/Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
John David Anglin authored
commit 13d57093 upstream. In testing James' patch to drivers/parisc/pdc_stable.c, I hit the BUG statement in flush_cache_range() during a system shutdown: kernel BUG at arch/parisc/kernel/cache.c:595! CPU: 2 PID: 6532 Comm: kworker/2:0 Not tainted 4.13.0-rc2+ #1 Workqueue: events free_ioctx IAOQ[0]: flush_cache_range+0x144/0x148 IAOQ[1]: flush_cache_page+0x0/0x1a8 RP(r2): flush_cache_range+0xec/0x148 Backtrace: [<00000000402910ac>] unmap_page_range+0x84/0x880 [<00000000402918f4>] unmap_single_vma+0x4c/0x60 [<0000000040291a18>] zap_page_range_single+0x110/0x160 [<0000000040291c34>] unmap_mapping_range+0x174/0x1a8 [<000000004026ccd8>] truncate_pagecache+0x50/0xa8 [<000000004026cd84>] truncate_setsize+0x54/0x70 [<000000004033d534>] put_aio_ring_file+0x44/0xb0 [<000000004033d5d8>] aio_free_ring+0x38/0x140 [<000000004033d714>] free_ioctx+0x34/0xa8 [<00000000401b0028>] process_one_work+0x1b8/0x4d0 [<00000000401b04f4>] worker_thread+0x1b4/0x648 [<00000000401b9128>] kthread+0x1b0/0x208 [<0000000040150020>] end_fault_vector+0x20/0x28 [<0000000040639518>] nf_ip_reroute+0x50/0xa8 [<0000000040638ed0>] nf_ip_route+0x10/0x78 [<0000000040638c90>] xfrm4_mode_tunnel_input+0x180/0x1f8 CPU: 2 PID: 6532 Comm: kworker/2:0 Not tainted 4.13.0-rc2+ #1 Workqueue: events free_ioctx Backtrace: [<0000000040163bf0>] show_stack+0x20/0x38 [<0000000040688480>] dump_stack+0xa8/0x120 [<0000000040163dc4>] die_if_kernel+0x19c/0x2b0 [<0000000040164d0c>] handle_interruption+0xa24/0xa48 This patch modifies flush_cache_range() to handle non current contexts. In as much as this occurs infrequently, the simplest approach is to flush the entire cache when this happens. Signed-off-by:
John David Anglin <dave.anglin@bell.net> Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Helge Deller authored
commit 8f8201df upstream. Since kernel 4.11 the thread and irq stacks on parisc randomly overflow the default size of 16k. The reason why stack usage suddenly grew is yet unknown. Signed-off-by:
-
- 06 Aug, 2017 24 commits
-
-
Greg Kroah-Hartman authored
-
Chris Brandt authored
commit 9c284c41 upstream. The existing code gives an incorrect pointer value. The buffer pointer 'buf' was of type unsigned short *, and 'count' was a number in bytes. A cast of buf should have been used. However, instead of casting, just change the code to use u32 pointers. Reported-by:
Chris Brandt <chris.brandt@renesas.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Al Viro authored
commit 49d31c2f upstream. take_dentry_name_snapshot() takes a safe snapshot of dentry name; if the name is a short one, it gets copied into caller-supplied structure, otherwise an extra reference to external name is grabbed (those are never modified). In either case the pointer to stable string is stored into the same structure. dentry must be held by the caller of take_dentry_name_snapshot(), but may be freely dropped afterwards - the snapshot will stay until destroyed by release_dentry_name_snapshot(). Intended use: struct name_snapshot s; take_dentry_name_snapshot(&s, dentry); ... access s.name ... release_dentry_name_snapshot(&s); Replaces fsnotify_oldname_...(), gets used in fsnotify to obtain the name to pass down with event. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Valentin Vidic authored
commit 860f01e9 upstream. systemd by default starts watchdog on reboot and sets the timer to ShutdownWatchdogSec=10min. Reboot handler in ipmi_watchdog than reduces the timer to 120s which is not enough time to boot a Xen machine with a lot of RAM. As a result the machine is rebooted the second time during the long run of (XEN) Scrubbing Free RAM..... Fix this by setting the timer to 120s only if it was previously set to a low value. Signed-off-by:
Valentin Vidic <Valentin.Vidic@CARNet.hr> Signed-off-by:
Corey Minyard <cminyard@mvista.com> Signed-off-by:
-
Annie Cherkaev authored
commit 9f5af546 upstream. This fixes a potential buffer overflow in isdn_net.c caused by an unbounded strcpy. [ ISDN seems to be effectively unmaintained, and the I4L driver in particular is long deprecated, but in case somebody uses this.. - Linus ] Signed-off-by:
Jiten Thakkar <jitenmt@gmail.com> Signed-off-by:
Annie Cherkaev <annie.cherk@gmail.com> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Kees Cook <keescook@chromium.org> Signed-off-by:
-
Imre Deak authored
commit 283d6860 upstream. The scaler allocation code depends on a non-zero default value for the crtc scaler_id, so make sure we initialize the scaler state accordingly even if the crtc is off. This fixes at least an initial YUV420 modeset (added in a follow-up patchset by Shashank) when booting with the screen off: after the initial HW readout and modeset which enables the scaler a subsequent modeset will disable the scaler which isn't properly allocated. This results in a funky HW state where the pipe scaler HW registers can't be modified and the normally black screen is grey and shifted to the right or jitters. The problem was revealed by Shashank's YUV420 patchset and first reported by Ville. v2: - In the stable tag also include versions which need backporting (Jani) Cc: Jani Nikula <jani.nikula@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chandra Konduru <chandra.konduru@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Reported-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Fixes: a1b2278e ("drm/i915: skylake panel fitting using shared scalers") Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Mahesh Kumar <mahesh1.kumar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170720112820.26816-1-imre.deak@intel.comSigned-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> (cherry picked from commit 5fb9dadf) Signed-off-by:
-
Ben Skeggs authored
commit 38bcb208 upstream. Bit 30 being set causes the upper half of BAR2 to stay in physical mode, mapped over the end of VRAM, even when the rest of the BAR has been set to virtual mode. We inherited our initial value from RM, but I'm not aware of any reason we need to keep it that way. This fixes severe GPU hang/lockup issues revealed by Wayland on F26. Shout-out to NVIDIA for the quick response with the potential cause! Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Ilia Mirkin authored
commit a90e049c upstream. GP102's cursors go from chan 17..20. Increase the array size to hold their data properly. Fixes: e50fcff1 ("drm/nouveau/disp/gp102: fix cursor/overlay immediate channel indices") Signed-off-by:
Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by:
-
Sinclair Yeh authored
commit 7b009e76 upstream. This was originally chosen to be an arbitrarily large number. However, some user mode may actually try to set a 16Kx16K mode and run into other issues. Since 8Kx8K is the current texture limit for Mesa LLVM driver, we will just use this limit for now. Signed-off-by:
Sinclair Yeh <syeh@vmware.com> Reviewed-by:
Brian Paul <brianp@vmware.com> Signed-off-by:
-
Sinclair Yeh authored
commit fcfffdd8 upstream. The current code does not look correct, and the reason for it is probably lost. Since this now generates a compiler warning, fix it to what makes sense. Reported-by:
-
Ofer Heifetz authored
commit 7e96d559 upstream. Since thread_group worker and raid5d kthread are not in sync, if worker writes stripe before raid5d then requests will be waiting for issue_pendig. Issue observed when building raid5 with ext4, in some build runs jbd2 would get hung and requests were waiting in the HW engine waiting to be issued. Fix this by adding a call to async_tx_issue_pending_all in the raid5_do_work. Signed-off-by:
Ofer Heifetz <oferh@marvell.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
Shaohua Li authored
commit 16d56e2f upstream. After bio is submitted, we should not clone it as its bi_iter might be invalid by driver. This is the case of behind_master_bio. In certain situration, we could dispatch behind_master_bio immediately for the first disk and then clone it for other disks. https://bugzilla.kernel.org/show_bug.cgi?id=196383Reported-and-tested-by:
Markus <m4rkusxxl@web.de> Reviewed-by:
Ming Lei <ming.lei@redhat.com> Fix: 841c1316(md: raid1: improve write behind) Signed-off-by:
-
Ming Lei authored
commit 022e510f upstream. bio_add_page() won't fail for resync bio, and the page index for each bio is same, so remove it. More importantly the 'idx' of 'struct resync_pages' is initialized in mempool allocator function, the current way is wrong since mempool is only responsible for allocation, we can't use that for initialization. Suggested-by:
NeilBrown <neilb@suse.com> Reported-by:
Patrick <dto@gmx.net> Fixes: f0250618(md: raid10: don't use bio's vec table to manage resync pages) Fixes: 98d30c58(md: raid1: don't use bio's vec table to manage resync pages) Signed-off-by:
-
Mikulas Patocka authored
commit bc86a41e upstream. If the dm-integrity superblock was corrupted in such a way that the journal_sections field was zero, the integrity target would deadlock because it would wait forever for free space in the journal. Detect this situation and refuse to activate the device. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Fixes: 7eada909 ("dm: add integrity target") Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Mikulas Patocka authored
commit 9dd59727 upstream. When using a block size greater than 512 bytes, the dm-integrity target allocates journal space inefficiently. It allocates one journal entry for each 512-byte chunk of data, fills an entry for each block of data and leaves the remaining entries unused. This issue doesn't cause data corruption, but all the unused journal entries degrade performance severely. For example, with 4k blocks and an 8k bio, it would allocate 16 journal entries but only use 2 entries. The remaining 14 entries were left unused. Fix this by adding the missing 'log2_sectors_per_block' shifts that are required to have each journal entry map to a full block. Signed-off-by:
-
Paul Mackerras authored
commit ef427198 upstream. Commit f98a8bf9 ("KVM: PPC: Book3S HV: Allow KVM_PPC_ALLOCATE_HTAB ioctl() to change HPT size", 2016-12-20) changed the behaviour of the KVM_PPC_ALLOCATE_HTAB ioctl so that it now allocates a new HPT and new revmap array if there was a previously-allocated HPT of a different size from the size being requested. In this case, we need to reset the rmap arrays of the memslots, because the rmap arrays will contain references to HPTEs which are no longer valid. Worse, these references are also references to slots in the new revmap array (which parallels the HPT), and the new revmap array contains random contents, since it doesn't get zeroed on allocation. The effect of having these stale references to slots in the revmap array that contain random contents is that subsequent calls to functions such as kvmppc_add_revmap_chain will crash because they will interpret the non-zero contents of the revmap array as HPTE indexes and thus index outside of the revmap array. This leads to host crashes such as the following. [ 7072.862122] Unable to handle kernel paging request for data at address 0xd000000c250c00f8 [ 7072.862218] Faulting instruction address: 0xc0000000000e1c78 [ 7072.862233] Oops: Kernel access of bad area, sig: 11 [#1] [ 7072.862286] SMP NR_CPUS=1024 [ 7072.862286] NUMA [ 7072.862325] PowerNV [ 7072.862378] Modules linked in: kvm_hv vhost_net vhost tap xt_CHECKSUM ipt_MASQUERADE nf_nat_masquerade_ipv4 ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 xt_conntrack ip_set nfnetlink ebtable_nat ebtable_broute bridge stp llc ip6table_mangle ip6table_security ip6table_raw iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw ebtable_filter ebtables ip6table_filter ip6_tables rpcrdma ib_isert iscsi_target_mod ib_iser libiscsi scsi_transport_iscsi ib_srpt target_core_mod ib_srp scsi_transport_srp ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm iw_cxgb3 mlx5_ib ib_core ses enclosure scsi_transport_sas ipmi_powernv ipmi_devintf ipmi_msghandler powernv_op_panel i2c_opal nfsd auth_rpcgss oid_registry [ 7072.863085] nfs_acl lockd grace sunrpc kvm_pr kvm xfs libcrc32c scsi_dh_alua dm_service_time radeon lpfc nvme_fc nvme_fabrics nvme_core scsi_transport_fc i2c_algo_bit tg3 drm_kms_helper ptp pps_core syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm dm_multipath i2c_core cxgb3 mlx5_core mdio [last unloaded: kvm_hv] [ 7072.863381] CPU: 72 PID: 56929 Comm: qemu-system-ppc Not tainted 4.12.0-kvm+ #59 [ 7072.863457] task: c000000fe29e7600 task.stack: c000001e3ffec000 [ 7072.863520] NIP: c0000000000e1c78 LR: c0000000000e2e3c CTR: c0000000000e25f0 [ 7072.863596] REGS: c000001e3ffef560 TRAP: 0300 Not tainted (4.12.0-kvm+) [ 7072.863658] MSR: 9000000100009033 <SF,HV,EE,ME,IR,DR,RI,LE,TM[E]> [ 7072.863667] CR: 44082882 XER: 20000000 [ 7072.863767] CFAR: c0000000000e2e38 DAR: d000000c250c00f8 DSISR: 42000000 SOFTE: 1 GPR00: c0000000000e2e3c c000001e3ffef7e0 c000000001407d00 d000000c250c00f0 GPR04: d00000006509fb70 d00000000b3d2048 0000000003ffdfb7 0000000000000000 GPR08: 00000001007fdfb7 00000000c000000f d0000000250c0000 000000000070f7bf GPR12: 0000000000000008 c00000000fdad000 0000000010879478 00000000105a0d78 GPR16: 00007ffaf4080000 0000000000001190 0000000000000000 0000000000010000 GPR20: 4001ffffff000415 d00000006509fb70 0000000004091190 0000000ee1881190 GPR24: 0000000003ffdfb7 0000000003ffdfb7 00000000007fdfb7 c000000f5c958000 GPR28: d00000002d09fb70 0000000003ffdfb7 d00000006509fb70 d00000000b3d2048 [ 7072.864439] NIP [c0000000000e1c78] kvmppc_add_revmap_chain+0x88/0x130 [ 7072.864503] LR [c0000000000e2e3c] kvmppc_do_h_enter+0x84c/0x9e0 [ 7072.864566] Call Trace: [ 7072.864594] [c000001e3ffef7e0] [c000001e3ffef830] 0xc000001e3ffef830 (unreliable) [ 7072.864671] [c000001e3ffef830] [c0000000000e2e3c] kvmppc_do_h_enter+0x84c/0x9e0 [ 7072.864751] [c000001e3ffef920] [d00000000b38d878] kvmppc_map_vrma+0x168/0x200 [kvm_hv] [ 7072.864831] [c000001e3ffef9e0] [d00000000b38a684] kvmppc_vcpu_run_hv+0x1284/0x1300 [kvm_hv] [ 7072.864914] [c000001e3ffefb30] [d00000000f465664] kvmppc_vcpu_run+0x44/0x60 [kvm] [ 7072.865008] [c000001e3ffefb60] [d00000000f461864] kvm_arch_vcpu_ioctl_run+0x114/0x290 [kvm] [ 7072.865152] [c000001e3ffefbe0] [d00000000f453c98] kvm_vcpu_ioctl+0x598/0x7a0 [kvm] [ 7072.865292] [c000001e3ffefd40] [c000000000389328] do_vfs_ioctl+0xd8/0x8c0 [ 7072.865410] [c000001e3ffefde0] [c000000000389be4] SyS_ioctl+0xd4/0x130 [ 7072.865526] [c000001e3ffefe30] [c00000000000b760] system_call+0x58/0x6c [ 7072.865644] Instruction dump: [ 7072.865715] e95b2110 793a0020 7b4926e4 7f8a4a14 409e0098 807c000c 786326e4 7c6a1a14 [ 7072.865857] 935e0008 7bbd0020 813c000c 913e000c <93a30008> 93bc000c 48000038 60000000 [ 7072.866001] ---[ end trace 627b6e4bf8080edc ]--- Note that to trigger this, it is necessary to use a recent upstream QEMU (or other userspace that resizes the HPT at CAS time), specify a maximum memory size substantially larger than the current memory size, and boot a guest kernel that does not support HPT resizing. This fixes the problem by resetting the rmap arrays when the old HPT is freed. Fixes: f98a8bf9 ("KVM: PPC: Book3S HV: Allow KVM_PPC_ALLOCATE_HTAB ioctl() to change HPT size") Reviewed-by:
David Gibson <david@gibson.dropbear.id.au> Signed-off-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
-
Paul Mackerras authored
commit e4705715 upstream. Commit 46a704f8 ("KVM: PPC: Book3S HV: Preserve userspace HTM state properly", 2017-06-15) added code to read transactional memory (TM) registers but forgot to enable TM before doing so. The result is that if userspace does have live values in the TM registers, a KVM_RUN ioctl will cause a host kernel crash like this: [ 181.328511] Unrecoverable TM Unavailable Exception f60 at d00000001e7d9980 [ 181.328605] Oops: Unrecoverable TM Unavailable Exception, sig: 6 [#1] [ 181.328613] SMP NR_CPUS=2048 [ 181.328613] NUMA [ 181.328618] PowerNV [ 181.328646] Modules linked in: vhost_net vhost tap nfs_layout_nfsv41_files rpcsec_gss_krb5 nfsv4 dns_resolver nfs +fscache xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat +nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun ebtable_filter ebtables +ip6table_filter ip6_tables iptable_filter bridge stp llc kvm_hv kvm nfsd ses enclosure scsi_transport_sas ghash_generic +auth_rpcgss gf128mul xts sg ctr nfs_acl lockd vmx_crypto shpchp ipmi_powernv i2c_opal grace ipmi_devintf i2c_core +powernv_rng sunrpc ipmi_msghandler ibmpowernv uio_pdrv_genirq uio leds_powernv powernv_op_panel ip_tables xfs sd_mod +lpfc ipr bnx2x libata mdio ptp pps_core scsi_transport_fc libcrc32c dm_mirror dm_region_hash dm_log dm_mod [ 181.329278] CPU: 40 PID: 9926 Comm: CPU 0/KVM Not tainted 4.12.0+ #1 [ 181.329337] task: c000003fc6980000 task.stack: c000003fe4d80000 [ 181.329396] NIP: d00000001e7d9980 LR: d00000001e77381c CTR: d00000001e7d98f0 [ 181.329465] REGS: c000003fe4d837e0 TRAP: 0f60 Not tainted (4.12.0+) [ 181.329523] MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> [ 181.329527] CR: 24022448 XER: 00000000 [ 181.329608] CFAR: d00000001e773818 SOFTE: 1 [ 181.329608] GPR00: d00000001e77381c c000003fe4d83a60 d00000001e7ef410 c000003fdcfe0000 [ 181.329608] GPR04: c000003fe4f00000 0000000000000000 0000000000000000 c000003fd7954800 [ 181.329608] GPR08: 0000000000000001 c000003fc6980000 0000000000000000 d00000001e7e2880 [ 181.329608] GPR12: d00000001e7d98f0 c000000007b19000 00000001295220e0 00007fffc0ce2090 [ 181.329608] GPR16: 0000010011886608 00007fff8c89f260 0000000000000001 00007fff8c080028 [ 181.329608] GPR20: 0000000000000000 00000100118500a6 0000010011850000 0000010011850000 [ 181.329608] GPR24: 00007fffc0ce1b48 0000010011850000 00000000d673b901 0000000000000000 [ 181.329608] GPR28: 0000000000000000 c000003fdcfe0000 c000003fdcfe0000 c000003fe4f00000 [ 181.330199] NIP [d00000001e7d9980] kvmppc_vcpu_run_hv+0x90/0x6b0 [kvm_hv] [ 181.330264] LR [d00000001e77381c] kvmppc_vcpu_run+0x2c/0x40 [kvm] [ 181.330322] Call Trace: [ 181.330351] [c000003fe4d83a60] [d00000001e773478] kvmppc_set_one_reg+0x48/0x340 [kvm] (unreliable) [ 181.330437] [c000003fe4d83b30] [d00000001e77381c] kvmppc_vcpu_run+0x2c/0x40 [kvm] [ 181.330513] [c000003fe4d83b50] [d00000001e7700b4] kvm_arch_vcpu_ioctl_run+0x114/0x2a0 [kvm] [ 181.330586] [c000003fe4d83bd0] [d00000001e7642f8] kvm_vcpu_ioctl+0x598/0x7a0 [kvm] [ 181.330658] [c000003fe4d83d40] [c0000000003451b8] do_vfs_ioctl+0xc8/0x8b0 [ 181.330717] [c000003fe4d83de0] [c000000000345a64] SyS_ioctl+0xc4/0x120 [ 181.330776] [c000003fe4d83e30] [c00000000000b004] system_call+0x58/0x6c [ 181.330833] Instruction dump: [ 181.330869] e92d0260 e9290b50 e9290108 792807e3 41820058 e92d0260 e9290b50 e9290108 [ 181.330941] 792ae8a4 794a1f87 408204f4 e92d0260 <7d4022a6> f9490ff0 e92d0260 7d4122a6 [ 181.331013] ---[ end trace 6f6ddeb4bfe92a92 ]--- The fix is just to turn on the TM bit in the MSR before accessing the registers. Fixes: 46a704f8 ("KVM: PPC: Book3S HV: Preserve userspace HTM state properly") Reported-by:
Jan Stancek <jstancek@redhat.com> Tested-by:
-
Herbert Xu authored
commit 41cdf7a4 upstream. When authencesn is used together with digest_null a crash will occur on the decrypt path. This is because normally we perform a special setup to preserve the ESN, but this is skipped if there is no authentication. However, on the post-authentication path it always expects the preservation to be in place, thus causing a crash when digest_null is used. This patch fixes this by also skipping the post-processing when there is no authentication. Fixes: 104880a6 ("crypto: authencesn - Convert to new AEAD...") Reported-by:
Jan Tluka <jtluka@redhat.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
raveendra padasalagi authored
commit efc856ed upstream. SPU driver is dependent on generic MAILBOX API's to communicate with underlying DMA engine driver. So this patch removes BCM_PDC_MBOX "depends on" for SPU driver in Kconfig and adds MAILBOX as dependent module. Fixes: 9d12ba86 ("crypto: brcm - Add Broadcom SPU driver") Signed-off-by:
Raveendra Padasalagi <raveendra.padasalagi@broadcom.com> Reviewed-by:
Ray Jui <ray.jui@broadcom.com> Reviewed-by:
Scott Branden <scott.branden@broadcom.com> Signed-off-by:
-
raveendra padasalagi authored
commit a7e6e5d8 upstream. In Broadcom SPU driver, due to missing break statement in spu2_hash_xlate() while mapping SPU2 equivalent SHA3-512 value, -EINVAL is chosen and hence leading to failure of SHA3-512 algorithm. This patch fixes the same. Fixes: 9d12ba86 ("crypto: brcm - Add Broadcom SPU driver") Signed-off-by:
-
Frank Rowand authored
commit b4b201d8 upstream. Update the cpp include flags for compiling device tree dts files to match the changes made to the kernel build process in commit d5d332d3 ("devicetree: Move include prefixes from arch to separate directory"). Signed-off-by:
Frank Rowand <frank.rowand@sony.com> Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Benjamin Coddington authored
commit b7dbcc0e upstream. nfs4_retry_setlk() sets the task's state to TASK_INTERRUPTIBLE within the same region protected by the wait_queue's lock after checking for a notification from CB_NOTIFY_LOCK callback. However, after releasing that lock, a wakeup for that task may race in before the call to freezable_schedule_timeout_interruptible() and set TASK_WAKING, then freezable_schedule_timeout_interruptible() will set the state back to TASK_INTERRUPTIBLE before the task will sleep. The result is that the task will sleep for the entire duration of the timeout. Since we've already set TASK_INTERRUPTIBLE in the locked section, just use freezable_schedule_timout() instead. Fixes: a1d617d8 ("nfs: allow blocking locks to be awoken by lock callbacks") Signed-off-by:
Benjamin Coddington <bcodding@redhat.com> Reviewed-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
-
NeilBrown authored
commit 442ce049 upstream. Prior to commit ca0daa27 ("NFS: Cache aggressively when file is open for writing"), NFS would revalidate, or invalidate, the file size when taking a lock. Since that commit it only invalidates the file content. If the file size is changed on the server while wait for the lock, the client will have an incorrect understanding of the file size and could corrupt data. This particularly happens when writing beyond the (supposed) end of file and can be easily be demonstrated with posix_fallocate(). If an application opens an empty file, waits for a write lock, and then calls posix_fallocate(), glibc will determine that the underlying filesystem doesn't support fallocate (assuming version 4.1 or earlier) and will write out a '0' byte at the end of each 4K page in the region being fallocated that is after the end of the file. NFS will (usually) detect that these writes are beyond EOF and will expand them to cover the whole page, and then will merge the pages. Consequently, NFS will write out large blocks of zeroes beyond where it thought EOF was. If EOF had moved, the pre-existing part of the file will be over-written. Locking should have protected against this, but it doesn't. This patch restores the use of nfs_zap_caches() which invalidated the cached attributes. When posix_fallocate() asks for the file size, the request will go to the server and get a correct answer. Fixes: ca0daa27 ("NFS: Cache aggressively when file is open for writing") Signed-off-by:
-
Chen-Yu Tsai authored
commit 26cb2be4 upstream. The register for the "new timing mode" also has bit fields for setting output and sample timing phases. According to comments in Allwinner's BSP kernel, the default values are good enough. Keep the default values already in the hardware when setting new timing mode, instead of overwriting the whole register. Fixes: 9a37e53e ("mmc: sunxi: Enable the new timings for the A64 MMC controllers") Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Acked-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
-
