- 27 Jul, 2020 36 commits
-
-
Nikolay Borisov authored
Will enable converting btrfs_submit_compressed_write to btrfs_inode more easily. Signed-off-by:
Nikolay Borisov <nborisov@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Nikolay Borisov authored
It has one VFS and 1 btrfs inode usages but converting it to btrfs_inode interface will allow seamless conversion of its callers. Signed-off-by:
-
Nikolay Borisov authored
It really wants a btrfs_inode and will allow submit_compressed_extents to be completely converted to btrfs_inode in follow up patches. Signed-off-by:
-
Nikolay Borisov authored
It really wants btrfs_inode and not a vfs inode. Signed-off-by:
-
Nikolay Borisov authored
It doesn't use the generic vfs inode for anything use btrfs_inode directly. Signed-off-by:
-
Nikolay Borisov authored
It doesn't use the vfs inode for anything, can just as easily take btrfs_inode. Follow up patches will convert callers as well. Signed-off-by:
-
Nikolay Borisov authored
This is internal btrfs function what really needs the vfs_inode only for igrab and a tracepoint. Signed-off-by:
-
Filipe Manana authored
The 'trans_list' member of an ordered extent was used to keep track of the ordered extents for which a transaction commit had to wait. These were ordered extents that were started and logged by an fsync. However we don't do that anymore and before we stopped doing it we changed the approach to wait for the ordered extents in commit 161c3549 ("Btrfs: change how we wait for pending ordered extents"), which stopped using that list and therefore the 'trans_list' member is not used anymore since that commit. So just remove it since it's doing nothing and making each ordered extent structure waste memory (2 pointers). Reviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
-
Filipe Manana authored
The 'log_list' member of an ordered extent was used keep track of which ordered extents we needed to wait after logging metadata, but is not used anymore since commit 5636cf7d ("btrfs: remove the logged extents infrastructure"), as we now always wait on ordered extent completion before logging metadata. So just remove it since it's doing nothing and making each ordered extent structure waste more memory (2 pointers). Reviewed-by:
-
David Sterba authored
The CPU and on-disk keys are mapped to two different structures because of the endianness. There's an intermediate buffer used to do the conversion, but this is not necessary when CPU and on-disk endianness match. Add optimized versions of helpers that take disk_key and use the buffer directly for CPU keys or drop the intermediate buffer and conversion. This saves a lot of stack space accross many functions and removes about 6K of generated binary code: text data bss dec hex filename 1090439 17468 14912 1122819 112203 pre/btrfs.ko 1084613 17456 14912 1116981 110b35 post/btrfs.ko Delta: -5826 Reviewed-by:
-
Qu Wenruo authored
Before this patch, qgroup completely relies on per-inode extent io tree to detect reserved data space leak. However previous bug has already shown how release page before btrfs_finish_ordered_io() could lead to leak, and since it's QGROUP_RESERVED bit cleared without triggering qgroup rsv, it can't be detected by per-inode extent io tree. So this patch adds another (and hopefully the final) safety net to catch qgroup data reserved space leak. At least the new safety net catches all the leaks during development, so it should be pretty useful in the real world. Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Qu Wenruo <wqu@suse.com> Reviewed-by:
-
Qu Wenruo authored
[BUG] The following simple workload from fsstress can lead to qgroup reserved data space leak: 0/0: creat f0 x:0 0 0 0/0: creat add id=0,parent=-1 0/1: write f0[259 1 0 0 0 0] [600030,27288] 0 0/4: dwrite - xfsctl(XFS_IOC_DIOINFO) f0[259 1 0 0 64 627318] return 25, fallback to stat() 0/4: dwrite f0[259 1 0 0 64 627318] [610304,106496] 0 This would cause btrfs qgroup to leak 20480 bytes for data reserved space. If btrfs qgroup limit is enabled, such leak can lead to unexpected early EDQUOT and unusable space. [CAUSE] When doing direct IO, kernel will try to writeback existing buffered page cache, then invalidate them: generic_file_direct_write() |- filemap_write_and_wait_range(); |- invalidate_inode_pages2_range(); However for btrfs, the bi_end_io hook doesn't finish all its heavy work right after bio ends. In fact, it delays its work further: submit_extent_page(end_io_func=end_bio_extent_writepage); end_bio_extent_writepage() |- btrfs_writepage_endio_finish_ordered() |- btrfs_init_work(finish_ordered_fn); <<< Work queue execution >>> finish_ordered_fn() |- btrfs_finish_ordered_io(); |- Clear qgroup bits This means, when filemap_write_and_wait_range() returns, btrfs_finish_ordered_io() is not guaranteed to be executed, thus the qgroup bits for related range are not cleared. Now into how the leak happens, this will only focus on the overlapping part of buffered and direct IO part. 1. After buffered write The inode had the following range with QGROUP_RESERVED bit: 596 616K |///////////////| Qgroup reserved data space: 20K 2. Writeback part for range [596K, 616K) Write back finished, but btrfs_finish_ordered_io() not get called yet. So we still have: 596K 616K |///////////////| Qgroup reserved data space: 20K 3. Pages for range [596K, 616K) get released This will clear all qgroup bits, but don't update the reserved data space. So we have: 596K 616K | | Qgroup reserved data space: 20K That number doesn't match the qgroup bit range anymore. 4. Dio prepare space for range [596K, 700K) Qgroup reserved data space for that range, we got: 596K 616K 700K |///////////////|///////////////////////| Qgroup reserved data space: 20K + 104K = 124K 5. btrfs_finish_ordered_range() gets executed for range [596K, 616K) Qgroup free reserved space for that range, we got: 596K 616K 700K | |///////////////////////| We need to free that range of reserved space. Qgroup reserved data space: 124K - 20K = 104K 6. btrfs_finish_ordered_range() gets executed for range [596K, 700K) However qgroup bit for range [596K, 616K) is already cleared in previous step, so we only free 84K for qgroup reserved space. 596K 616K 700K | | | We need to free that range of reserved space. Qgroup reserved data space: 104K - 84K = 20K Now there is no way to release that 20K unless disabling qgroup or unmounting the fs. [FIX] This patch will change the timing of btrfs_qgroup_release/free_data() call. Here it uses buffered COW write as an example. The new timing | The old timing ----------------------------------------+--------------------------------------- btrfs_buffered_write() | btrfs_buffered_write() |- btrfs_qgroup_reserve_data() | |- btrfs_qgroup_reserve_data() | btrfs_run_delalloc_range() | btrfs_run_delalloc_range() |- btrfs_add_ordered_extent() | |- btrfs_qgroup_release_data() | The reserved is passed into | btrfs_ordered_extent structure | | btrfs_finish_ordered_io() | btrfs_finish_ordered_io() |- The reserved space is passed to | |- btrfs_qgroup_release_data() btrfs_qgroup_record | The resereved space is passed | to btrfs_qgroup_recrod | btrfs_qgroup_account_extents() | btrfs_qgroup_account_extents() |- btrfs_qgroup_free_refroot() | |- btrfs_qgroup_free_refroot() The point of such change is to ensure, when ordered extents are submitted, the qgroup reserved space is already released, to keep the timing aligned with file_write_and_wait_range(). So that qgroup data reserved space is all bound to btrfs_ordered_extent and solve the timing mismatch. Fixes: f695fdce ("btrfs: qgroup: Introduce functions to release/free qgroup reserve data space") Suggested-by: -
Qu Wenruo authored
The incoming qgroup reserved space timing will move the data reservation to ordered extent completely. However in btrfs_punch_hole_lock_range() will call btrfs_invalidate_page(), which will clear QGROUP_RESERVED bit for the range. In current stage it's OK, but if we're making ordered extents handle the reserved space, then btrfs_punch_hole_lock_range() can clear the QGROUP_RESERVED bit before we submit ordered extent, leading to qgroup reserved space leakage. So here change the timing to make reserve data space after btrfs_punch_hole_lock_range(). The new timing is fine for either current code or the new code. Reviewed-by:
-
Qu Wenruo authored
This is to prepare for the incoming timing change of qgroup reserved data space and ordered extent. Reviewed-by:
-
Qu Wenruo authored
Function insert_reserved_file_extent() takes a long list of parameters, which are all for btrfs_file_extent_item, even including two reserved members, encryption and other_encoding. This makes the parameter list unnecessary long for a function which only gets called twice. This patch will refactor the parameter list, by using btrfs_file_extent_item as parameter directly to hugely reduce the number of parameters. Also, since there are only two callers, one in btrfs_finish_ordered_io() which inserts file extent for ordered extent, and one __btrfs_prealloc_file_range(). These two call sites have completely different context, where ordered extent can be compressed, but will always be regular extent, while the preallocated one is never going to be compressed and always has PREALLOC type. So use two small wrapper for these two different call sites to improve readability. Reviewed-by:
-
David Sterba authored
Add proper variable for the scrub page and use it instead of repeatedly dereferencing the other structures. Signed-off-by: -
David Sterba authored
Use a simpler iteration over tree block pages, same what csum_tree_block does: first page always exists, loop over the rest. Signed-off-by: -
David Sterba authored
Add proper variable for the scrub page and use it instead of repeatedly dereferencing the other structures. Signed-off-by: -
David Sterba authored
We have sectorsize same as PAGE_SIZE, the checksum can be calculated in one go. Signed-off-by: -
David Sterba authored
Add proper variable for the scrub page and use it instead of repeatedly dereferencing the other structures. Signed-off-by: -
David Sterba authored
The page contents with the checksum is available during the entire function so we don't need to make a copy. Signed-off-by: -
David Sterba authored
BTRFS_SUPER_INFO_SIZE is 4096, and fits to a page on all supported architectures, so we can calculate the checksum in one go. Signed-off-by: -
David Sterba authored
As the page mapping has been removed, rename the variables to 'kaddr' that we use everywhere else. The type is changed to 'char *' so pointer arithmetic works without casts. Signed-off-by: -
David Sterba authored
All pages that scrub uses in the scrub_block::pagev array are allocated with GFP_KERNEL and never part of any mapping, so kmap is not necessary, we only need to know the page address. In scrub_write_page_to_dev_replace we don't even need to call flush_dcache_page because of the same reason as above. Signed-off-by: -
Qu Wenruo authored
This patch introduces a new "rescue=" mount option group for all mount options for data recovery. Different rescue sub options are seperated by ':'. E.g "ro,rescue=nologreplay:usebackuproot". The original plan was to use ';', but ';' needs to be escaped/quoted, or it will be interpreted by bash, similar to '|'. And obviously, user can specify rescue options one by one like: "ro,rescue=nologreplay,rescue=usebackuproot". The following mount options are converted to "rescue=", old mount options are deprecated but still available for compatibility purpose: - usebackuproot Now it's "rescue=usebackuproot" - nologreplay Now it's "rescue=nologreplay" Signed-off-by:
-
Filipe Manana authored
We currently use btrfs_check_data_free_space() when allocating space for relocating data extents, but that is not necessary because that function combines btrfs_alloc_data_chunk_ondemand(), which does the actual space reservation, and btrfs_qgroup_reserve_data(). We can use btrfs_alloc_data_chunk_ondemand() directly because we know we do not need to reserve qgroup space since we are dealing with a relocation tree, which can never have qgroups (btrfs_qgroup_reserve_data() does nothing as is_fstree() returns false for a relocation tree). Conversely we can use btrfs_free_reserved_data_space_noquota() directly instead of btrfs_free_reserved_data_space(), since we had no qgroup reservation when allocating space. This change is preparatory work for another patch in this series that makes relocation reserve the exact amount of space it needs to relocate a data block group. The function btrfs_check_data_free_space() has the incovenient of requiring a start offset argument and we will want to be able to allocate space for multiple ranges, which are not consecutive, at once. Reviewed-by:
-
Filipe Manana authored
The start argument for btrfs_free_reserved_data_space_noquota() is only used to make sure the amount of bytes we decrement from the bytes_may_use counter of the data space_info object is aligned to the filesystem's sector size. It serves no other purpose. All its current callers always pass a length argument that is already aligned to the sector size, so we can make the start argument go away. In fact its presence makes it impossible to use it in a context where we just want to free a number of bytes for a range for which either we do not know its start offset or for freeing multiple ranges at once (which are not contiguous). This change is preparatory work for a patch (third patch in this series) that makes relocation of data block groups that are not full reserve less data space. Reviewed-by:
Anand Jain <anand.jain@oracle.com> Signed-off-by:
-
Liao Pingfang authored
As there is a dump_stack() done on memory allocation failures, these messages might as well be deleted instead. Signed-off-by:
Liao Pingfang <liao.pingfang@zte.com.cn> Reviewed-by:
-
Anand Jain authored
Use the helper function where it is open coded to increment the block_group reference count As btrfs_get_block_group() is a one-liner we could have open-coded it, but its partner function btrfs_put_block_group() isn't one-liner which does the free part in it. Reviewed-by:
-
Anand Jain authored
__btrfs_return_cluster_to_free_space() returns only 0. And all its parent functions don't need the return value either so make this a void function. Further, as none of the callers of btrfs_return_cluster_to_free_space() is actually using the return from this function, make this function also return void. Reviewed-by:
-
Filipe Manana authored
Initially when the 'removed' flag was added to a block group to avoid races between block group removal and fitrim, by commit 04216820 ("Btrfs: fix race between fs trimming and block group remove/allocation"), we had to lock the chunks mutex because we could be moving the block group from its current list, the pending chunks list, into the pinned chunks list, or we could just be adding it to the pinned chunks if it was not in the pending chunks list. Both lists were protected by the chunk mutex. However we no longer have those lists since commit 1c11b63e ("btrfs: replace pending/pinned chunks lists with io tree"), and locking the chunk mutex is no longer necessary because of that. The same happens at btrfs_unfreeze_block_group(), we lock the chunk mutex because the block group's extent map could be part of the pinned chunks list and the call to remove_extent_mapping() could be deleting it from that list, which used to be protected by that mutex. So just remove those lock and unlock calls as they are not needed anymore. Reviewed-by:
-
Johannes Thumshirn authored
When find_first_block_group() finds a block group item in the extent-tree, it does a lookup of the object in the extent mapping tree and does further checks on the item. Factor out this step from find_first_block_group() so we can further simplify the code. While we're at it, we can also just return early in find_first_block_group(), if the tree slot isn't found. Signed-off-by:
-
Johannes Thumshirn authored
We already have an fs_info in our function parameters, there's no need to do the maths again and get fs_info from the extent_root just to get the mapping_tree. Instead directly grab the mapping_tree from fs_info. Reviewed-by:
-
Nikolay Borisov authored
Adresses held in 'logical' array are always guaranteed to fall within the boundaries of the block group. That is, 'start' can never be smaller than cache->start. This invariant follows from the way the address are calculated in btrfs_rmap_block: stripe_nr = physical - map->stripes[i].physical; stripe_nr = div64_u64(stripe_nr, map->stripe_len); bytenr = chunk_start + stripe_nr * io_stripe_size; I.e it's always some IO stripe within the given chunk. Exploit this invariant to simplify the body of the loop by removing the unnecessary 'if' since its 'else' part is the one always executed. Signed-off-by: -
Nikolay Borisov authored
extent_map::orig_block_len contains the size of a physical stripe when it's used to describe block groups (calculated in read_one_chunk via calc_stripe_length or calculated in decide_stripe_size and then assigned to extent_map::orig_block_len in create_chunk). Exploit this fact to get the size directly rather than opencoding the calculations. No functional changes. Signed-off-by:
-
Nikolay Borisov authored
The call to btrfs_btree_balance_dirty has been there since the early days of BTRFS, when the btree was directly modified from the write path, hence dirtied btree inode pages. With the implementation of b888db2b ("Btrfs: Add delayed allocation to the extent based page tree code") 13 years ago the btree is no longer modified from the write path, hence there is no point in calling this function. Just remove it. Signed-off-by:
-
- 26 Jul, 2020 4 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild into master Pull Kbuild fixes from Masahiro Yamada: - do not use non-portable strsep() in a host program - fix single target builds for external modules - change Clang's --prefix option to make it work for the latest Clang * tag 'kbuild-fixes-v5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: Makefile: Fix GCC_TOOLCHAIN_DIR prefix for Clang cross compilation kbuild: fix single target builds for external modules modpost: remove use of non-standard strsep() in HOSTCC code
-
Linus Torvalds authored
Merge branch 'parisc-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux into master Pull parisc fixes from Helge Deller: "Two fixes: - Add the cmpxchg() function for pointers to u8 values. This fixes a kernel linking error when building the tusb1210 driver (from Liam Beguin). - Add a define for atomic64_set_release() to fix CPU soft lockups which happen because of missing unlocks while processing bit operations (from John David Anglin)" * 'parisc-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Add atomic64_set_release() define to avoid CPU soft lockups parisc: add support for cmpxchg on u8 pointers
-
Linus Torvalds authored
Merge tag 'char-misc-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc into master Pull char/misc driver fixes from Greg KH: "Here are a few small driver fixes for 5.8-rc7 They include: - habanalabs fixes - tiny fpga driver fixes - /dev/mem fixup from previous changes - interconnect driver fixes - binder fix All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: interconnect: msm8916: Fix buswidth of pcnoc_s nodes interconnect: Do not skip aggregation for disabled paths /dev/mem: Add missing memory barriers for devmem_inode binder: Don't use mmput() from shrinker function. habanalabs: prevent possible out-of-bounds array access fpga: dfl: fix bug in port reset handshake fpga: dfl: pci: reduce the scope of variable 'ret' habanalabs: set 4s timeout for message to device CPU habanalabs: set clock gating per engine habanalabs: block WREG_BULK packet on PDMA
-
