Add a node for the PMU module of the QCA6391 present on the RB5 board.
Assign its LDO power outputs to the existing Bluetooth module. Add a
node for the PCIe port to sm8250.dtsi and define the WLAN node on it in
the board's .dts and also make it consume the power outputs of the PMU.

Tested-by: Caleb Connolly <caleb.connolly@linaro.org> # OnePlus 8T
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240605122729.24283-5-brgl@bgdev.plSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Describe the ath12k WLAN on-board the WCN7850 module present on the
board.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240605122729.24283-4-brgl@bgdev.plSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Describe the ath12k WLAN on-board the WCN7850 module present on the
board.

[Neil: authored the initial version of the change]
Co-developed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240605122729.24283-3-brgl@bgdev.plSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Describe the ath12k WLAN on-board the WCN7850 module present on the
board.

[Neil: authored the initial version of the change]
Co-developed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240605122729.24283-2-brgl@bgdev.plSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Enable sound and modem for the GPLUS FL8005A.
The setup is similar to most MSM8916 devices, i.e.:

 - QDSP6 audio
 - Earpiece/headphones/microphones via digital/analog codec in
   MSM8916/PM8916
 - WWAN Internet via BAM-DMUX
Signed-off-by: Lin, Meng-Bo <linmengbo06890@proton.me>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240619111523.54301-1-linmengbo06890@proton.meSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Without explicitly specifying names for the regulators they are named
based on the DeviceTree node name. This results in multiple regulators
with the same name, making debug prints and regulator_summary impossible
to reason about.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Caleb Connolly <caleb@postmarketos.org>
Link: https://lore.kernel.org/r/20240618-qcm6490-regulator-name-v1-2-69fa05e9f58e@fairphone.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Without explicitly specifying names for the regulators they are named
based on the DeviceTree node name. This results in multiple regulators
with the same name, making debug prints and regulator_summary impossible
to reason about.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240618-qcm6490-regulator-name-v1-1-69fa05e9f58e@fairphone.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add secure qfprom node and also add properties for multi channel
DDR. This is required for LLCC driver to pick the correct LLCC
configuration.

Fixes: 6209038f ("arm64: dts: qcom: qdu1000: Add LLCC/system-cache-controller")
Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Link: https://lore.kernel.org/r/20240618092711.15037-1-quic_kbajaj@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Currently the keyboard backlight is described in the common
sc7180-trogdor dtsi as an led node below a pwmleds node, and the led
node is set to disabled. Only the boards that have a keyboard backlight
enable it.

However, since the parent pwmleds node is still enabled everywhere, even
on boards that don't have keyboard backlight it is probed and fails,
resulting in an error:

  leds_pwm pwmleds: probe with driver leds_pwm failed with error -22

as well as a failure in the DT kselftest:

  not ok 45 /pwmleds

Fix this by controlling the status of the parent pwmleds node instead of
the child led, based on the presence of keyboard backlight. This is what
is done on sc7280 already.

While at it add a missing blank line before the child node to follow the
coding style.

Fixes: 7ec3e673 ("arm64: dts: qcom: sc7180-trogdor: add initial trogdor and lazor dt")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240614-sc7180-pwmleds-probe-v1-1-e2c3f1b42a43@collabora.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

There is no need to specify exact name for the second (AUX) output
clock. It has never been used for the lookups based on the system
clock name. The driver generates it on its own, in order to remain
compatible with the older DT. Drop the clock name.

Fixes: d00b42f1 ("arm64: dts: qcom: sm8650: remove pcie-1-phy-aux-clk and add pcie1_phy pcie1_phy_aux_clk")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240614-fix-pcie-phy-compat-v3-5-730d1811acf4@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

There is no need to specify exact name for the second (AUX) output
clock. It has never been used for the lookups based on the system
clock name. The driver generates it on its own, in order to remain
compatible with the older DT. Drop the clock name.

Fixes: 0cc97d9e ("arm64: dts: qcom: sm8550: remove pcie-1-phy-aux-clk and add pcie1_phy pcie1_phy_aux_clk")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240614-fix-pcie-phy-compat-v3-4-730d1811acf4@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

There is no need to specify exact name for the second (AUX) output
clock. It has never been used for the lookups based on the system
clock name. The driver generates it on its own, in order to remain
compatible with the older DT. Drop the clock name.

Fixes: e7686284 ("arm64: dts: qcom: sm8450: correct pcie1 phy clocks inputs to gcc")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240614-fix-pcie-phy-compat-v3-3-730d1811acf4@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The Embedded Controller in the Lenovo Yoga C630 is accessible on &i2c1
and provides battery and adapter status, as well as altmode
notifications for the second USB Type-C port.

Add a definition for the EC.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240614-yoga-ec-driver-v7-6-9f0b9b40ae76@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Describe links between the first USB3 host and the DisplayPort that is
routed to the same pins.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240614-yoga-ec-driver-v7-5-9f0b9b40ae76@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Enable sound and modem for Acer Iconia Talk S A1-724.
The setup is similar to most MSM8916 devices, i.e.:

- QDSP6 audio
- Earpiece/headphones/microphones via digital/analog codec in
  MSM8916/PM8916
- WWAN Internet via BAM-DMUX
Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Link: https://lore.kernel.org/r/20240609100243.834169-1-raymondhackley@protonmail.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Enable the A702 GPU (also marketed as "3D accelerator by qcom [1], lol).

[1] https://docs.qualcomm.com/bundle/publicresource/87-61720-1_REV_A_QUALCOMM_ROBOTICS_RB1_PLATFORM__QUALCOMM_QRB2210__PRODUCT_BRIEF.pdfReviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240606-topic-rb1_gpu-v4-5-4bc0c19da4af@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Describe the GPU hardware on the QCM2290.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240606-topic-rb1_gpu-v4-4-4bc0c19da4af@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Merge the QCM2290 GPUCC DeviceTree binding from the topic branch, to
make available the clock constants that subsequent commits depend on.

Add device tree bindings for graphics clock controller for Qualcomm
Technology Inc's QCM2290 SoCs.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240606-topic-rb1_gpu-v4-1-4bc0c19da4af@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Specify the file name for the squashed/non-split firmware with the .mbn
extension instead of the split .mdt. The kernel can load both but the
squashed version is preferred in dts nowadays.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240606-fp5-ipa-mbn-v1-1-183668affe58@fairphone.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add an 85C passive trip point to ensure the thermal framework takes
sufficient action to prevent reaching junction temperature and a
110C critical point to help avoid hw damage.

Also, register the GPU as a cooling device and hook it up to the
right thermal zones.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240510-topic-gpus_are_cool_now-v1-12-ababc269a438@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add an 85C passive trip point to ensure the thermal framework takes
sufficient action to prevent reaching junction temperature and a
110C critical point to help avoid hw damage.

Remove the copypasta-from-downstream userspace governor entries while
at it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240510-topic-gpus_are_cool_now-v1-11-ababc269a438@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add an 85C passive trip point to ensure the thermal framework takes
sufficient action to prevent reaching junction temperature and a
110C critical point to help avoid hw damage.

Remove the copypasta-from-downstream userspace governor entries while
at it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240510-topic-gpus_are_cool_now-v1-10-ababc269a438@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add an 85C passive trip point to ensure the thermal framework takes
sufficient action to prevent reaching junction temperature and a
110C critical point to help avoid hw damage.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240510-topic-gpus_are_cool_now-v1-9-ababc269a438@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add an 85C passive trip point to ensure the thermal framework takes
sufficient action to prevent reaching junction temperature and a
110C critical point to help avoid hw damage.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240510-topic-gpus_are_cool_now-v1-8-ababc269a438@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add an 85C passive trip point to ensure the thermal framework takes
sufficient action to prevent reaching junction temperature and a
110C critical point to help avoid hw damage.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240510-topic-gpus_are_cool_now-v1-7-ababc269a438@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Lower the thresholds to something more reasonable and introduce a
passive polling delay to make sure more than one "passive" thermal point
is taken into account when throttling.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240510-topic-gpus_are_cool_now-v1-6-ababc269a438@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Lower the thresholds to something more reasonable and introduce a
passive polling delay to make sure more than one "passive" thermal point
is taken into account when throttling.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240510-topic-gpus_are_cool_now-v1-5-ababc269a438@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add an 85C passive trip point to ensure the thermal framework takes
sufficient action to prevent reaching junction temperature and a
110C critical point to help avoid hw damage.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240510-topic-gpus_are_cool_now-v1-4-ababc269a438@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add an 85C passive trip point to ensure the thermal framework takes
sufficient action to prevent reaching junction temperature and a
110C critical point to help avoid hw damage.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240510-topic-gpus_are_cool_now-v1-3-ababc269a438@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add an 85C passive trip point with 1C of hysteresis to ensure the
thermal framework takes sufficient action to prevent reaching junction
temperature. Also, add passive polling to ensure more than one
temperature change event is recorded.

Fixes: 014bbc99 ("arm64: dts: qcom: sc8280xp: Introduce additional tsens instances")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240510-topic-gpus_are_cool_now-v1-2-ababc269a438@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add an 85C passive trip point to ensure the thermal framework takes
sufficient action to prevent reaching junction temperature and a
110C critical point to help avoid hw damage.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240510-topic-gpus_are_cool_now-v1-1-ababc269a438@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

All of the thermal zone suppliers are interrupt-driven, remove the
bogus and unnecessary polling that only wastes CPU time.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240510-topic-msm-polling-cleanup-v2-31-436ca4218da2@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

All of the thermal zone suppliers are interrupt-driven, remove the
bogus and unnecessary polling that only wastes CPU time.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240510-topic-msm-polling-cleanup-v2-30-436ca4218da2@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

All of the thermal zone suppliers are interrupt-driven, remove the
bogus and unnecessary polling that only wastes CPU time.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240510-topic-msm-polling-cleanup-v2-29-436ca4218da2@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

All of the thermal zone suppliers are interrupt-driven, remove the
bogus and unnecessary polling that only wastes CPU time.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240510-topic-msm-polling-cleanup-v2-28-436ca4218da2@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

All of the thermal zone suppliers are interrupt-driven, remove the
bogus and unnecessary polling that only wastes CPU time.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240510-topic-msm-polling-cleanup-v2-27-436ca4218da2@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

All of the thermal zone suppliers are interrupt-driven, remove the
bogus and unnecessary polling that only wastes CPU time.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240510-topic-msm-polling-cleanup-v2-26-436ca4218da2@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

All of the thermal zone suppliers are interrupt-driven, remove the
bogus and unnecessary polling that only wastes CPU time.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240510-topic-msm-polling-cleanup-v2-25-436ca4218da2@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

All of the thermal zone suppliers are interrupt-driven, remove the
bogus and unnecessary polling that only wastes CPU time.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240510-topic-msm-polling-cleanup-v2-24-436ca4218da2@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>