1. 14 Feb, 2014 11 commits
  2. 13 Feb, 2014 29 commits
    • Denis Kirjanov's avatar
      ipv4: ip_forward: perform skb->pkt_type check at the beginning · d4f2fa6a
      Denis Kirjanov authored
      Packets which have L2 address different from ours should be
      already filtered before entering into ip_forward().
      
      Perform that check at the beginning to avoid processing such packets.
      Signed-off-by: default avatarDenis Kirjanov <kda@linux-powerpc.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d4f2fa6a
    • stephen hemminger's avatar
      net: remove unnecessary return's · 2045ceae
      stephen hemminger authored
      One of my pet coding style peeves is the practice of
      adding extra return; at the end of function.
      Kill several instances of this in network code.
      
      I suppose some coccinelle wizardy could do this automatically.
      Signed-off-by: default avatarStephen Hemminger <stephen@networkplumber.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2045ceae
    • Stanislav Fomichev's avatar
      tcp: remove unused min_cwnd member of tcp_congestion_ops · 45f74359
      Stanislav Fomichev authored
      Commit 684bad11 "tcp: use PRR to reduce cwin in CWR state" removed all
      calls to min_cwnd, so we can safely remove it.
      Also, remove tcp_reno_min_cwnd because it was only used for min_cwnd.
      Signed-off-by: default avatarStanislav Fomichev <stfomichev@yandex-team.ru>
      Acked-by: default avatarYuchung Cheng <ycheng@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      45f74359
    • Vasundhara Volam's avatar
      be2net: refactor multi-channel config code for Skyhawk-R chip · f93f160b
      Vasundhara Volam authored
      Currently multi-channel configuration is read via the QUERY_FW_CONFIG cmd.
      This method has been deprecated by the Skyhawk-R FW. Instead,
      GET_PROFILE_CONFIG::port-desc must be used to query this configuration.
      
      This patch also:
      a) introduces a few macros to identify certain categories of multi-channel
      configs
      2) re-factors the be_cmd_set_profile_config() code to be able to read any kind
      of desc (and not just the nic-desc.)
      Signed-off-by: default avatarVasundhara Volam <vasundhara.volam@emulex.com>
      Signed-off-by: default avatarSathya Perla <sathya.perla@emulex.com>
      Signed-off-by: default avatarSomnath Kotur <somnath.kotur@emulex.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f93f160b
    • Vasundhara Volam's avatar
    • Somnath Kotur's avatar
      be2net: Log a kernel message when UE is detected in BE & Skyhawk · eb0eecc1
      Somnath Kotur authored
      This patch logs a kernel message when a HW error(SLIPORT_ERROR in Lancer and UE
      in BEx/Skyhawk) is detected. The log message for BE3 was missing earlier.
      This patch also refactors the code by segregating error-detection and reporting
      code for Lancer and BEx/SH.
      Signed-off-by: default avatarSomnath Kotur <somnath.kotur@emulex.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      eb0eecc1
    • David S. Miller's avatar
      Merge tag 'linux-can-next-for-3.15-20140212' of git://gitorious.org/linux-can/linux-can-next · 886ab57c
      David S. Miller authored
      linux-can-next-for-3.15-20140212
      
      Marc Kleine-Budde says:
      
      ====================
      this is a pull request of eight patches for net-next/master.
      
      Florian Vaussard contributed a series that merged the sja1000 of_platform
      into the platform driver. The of_platform driver is finally removed.
      Stephane Grosjean supplied a patch to allocate CANFD skbs. In a patch
      by Uwe Kleine-König another missing copyright information was added to
      a userspace header. And a patch by Yoann DI RUZZA that adds listen only
      mode to the at91_can driver.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      886ab57c
    • Yang Yingliang's avatar
      socket: replace some printk with pr_* · 3410f22e
      Yang Yingliang authored
      Prefer pr_*(...) to printk(KERN_* ...).
      Signed-off-by: default avatarYang Yingliang <yangyingliang@huawei.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3410f22e
    • Sergei Shtylyov's avatar
      sh_eth: use ETH_ZLEN instead of home-grown #define · 730c8c69
      Sergei Shtylyov authored
      The driver #define's and uses ETHERSMALL macro for the minimum Ethernet frame
      size for which we have a standard macro ETH_ZLEN.  Use the latter  instead of
      the home-grown one.
      Signed-off-by: default avatarSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      730c8c69
    • David S. Miller's avatar
      Merge branch 'tipc' · ca52b664
      David S. Miller authored
      Jon Maloy says:
      
      ====================
      tipc: clean up media and bearer layer
      
      This commit series aims at facilitating future changes to the
      locking policy around nodes, links and bearers.
      
      Currently, we have a big read/write lock (net_lock) that is used for
      serializing all changes to the node, link and bearer lists, as well
      as to their mutual pointers and references.
      
      But, in order to allow for concurrent access to the contents of these
      structures, net_lock is only used in read mode by the data path code,
      and hence a finer granular locking policy must be applied inside the
      scope of net_lock: a spinlock (node_lock) for each node structure,
      and another one (bearer_lock) for protection of bearer structures.
      
      This locking policy has proved hard to maintain. We have several
      times encountered contention problems between node_lock and
      bearer_lock, and with the advent of the RCU locking mechanism we
      feel it is anyway obsolete and ripe for improvements.
      
      We now plan to replace net_lock with an RCU lock, as well as
      getting rid of bearer_lock altogether. This will both reduce data
      path overhead and make the code more manageable, while reducing the
      risk of future lock contention problems.
      
      Prior to these changes, we need to do some necessary cleanup and
      code consolidation. This is what we do with this commit series,
      before we finally remove bearer_lock. In a later series we will
      replace net_lock with an RCU lock.
      
      v2:
       - Re-inserted a removed kerneldoc entry in commit#5, based on
         feedback from D. Miller.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ca52b664
    • Jon Paul Maloy's avatar
      tipc: add node_lock protection to link lookup function · e099e86c
      Jon Paul Maloy authored
      In an earlier commit, ("tipc: remove links list from bearer struct")
      we described three issues that need to be pre-emptively resolved before
      we can remove tipc_net_lock. Here we resolve issue a) described in that
      commit:
      
      "a) In access method #2, we access the link before taking the
          protecting node_lock. This will not work once net_lock is gone,
          so we will have to change the access order. We will deal with
          this in a later commit in this series."
      
      Here, we change that access order, by ensuring that the function
      link_find_link() returns only a safe reference for finding
      the link, i.e., a node pointer and an index into its 'links' array,
      not the link pointer itself. We also change all callers of this
      function to first take the node lock before they can check if there
      still is a valid link pointer at the returned index. Since the
      function now returns a node pointer rather than a link pointer,
      we rename it to the more appropriate 'tipc_link_find_owner().
      Signed-off-by: default avatarJon Maloy <jon.maloy@ericsson.com>
      Reviewed-by: default avatarYing Xue <ying.xue@windriver.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e099e86c
    • Ying Xue's avatar
      tipc: remove bearer_lock from tipc_bearer struct · a8304529
      Ying Xue authored
      After the earlier commits ("tipc: remove 'links' list from
      tipc_bearer struct") and ("tipc: introduce new spinlock to protect
      struct link_req"), there is no longer any need to protect struct
      link_req or or any link list by use of bearer_lock. Furthermore,
      we have eliminated the need for using bearer_lock during downcalls
      (send) from the link to the bearer, since we have ensured that
      bearers always have a longer life cycle that their associated links,
      and always contain valid data.
      
      So, the only need now for a lock protecting bearers is for guaranteeing
      consistency of the bearer list itself. For this, it is sufficient, at
      least for the time being, to continue applying 'net_lock´ in write mode.
      
      By removing bearer_lock we also pre-empt introduction of issue b) descibed
      in the previous commit "tipc: remove 'links' list from tipc_bearer struct":
      
      "b) When the outer protection from net_lock is gone, taking
          bearer_lock and node_lock in opposite order of method 1) and 2)
          will become an obvious deadlock hazard".
      
      Therefore, we now eliminate the bearer_lock spinlock.
      Signed-off-by: default avatarYing Xue <ying.xue@windriver.com>
      Reviewed-by: default avatarPaul Gortmaker <paul.gortmaker@windriver.com>
      Signed-off-by: default avatarJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a8304529
    • Jon Paul Maloy's avatar
      tipc: delay delete of link when failover is needed · 7d33939f
      Jon Paul Maloy authored
      When a bearer is disabled, all its attached links are deleted.
      Ideally, we should do link failover to redundant links on other bearers,
      if there are any, in such cases. This would be consistent with current
      behavior when a link is reset, but not deleted. However, due to the
      complexity involved, and the (wrongly) perceived low demand for this
      feature, it was never implemented until now.
      
      We mark the doomed link for deletion with a new flag, but wait until the
      failover process is finished before we actually delete it. With the
      improved link tunnelling/failover code introduced earlier in this commit
      series, it is now easy to identify a spot in the code where the failover
      is finished and it is safe to delete the marked link. Moreover, the test
      for the flag and the deletion can be done synchronously, and outside the
      most time critical data path.
      Signed-off-by: default avatarJon Maloy <jon.maloy@ericsson.com>
      Reviewed-by: default avatarYing Xue <ying.xue@windriver.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7d33939f
    • Jon Paul Maloy's avatar
      tipc: changes to general packet reception algorithm · a5377831
      Jon Paul Maloy authored
      We change the order of checking for destination users when processing
      incoming packets. By placing the checks for users that may potentially
      replace the processed buffer, i.e., CHANGEOVER_PROTOCOL and
      MSG_FRAGMENTER, in a separate step before we check for the true end
      users, we get rid of a label and a 'goto', at the same time making the
      code more comprehensible and easy to follow.
      
      This commit does not change any functionality, it is just a cosmetic
      code reshuffle.
      Signed-off-by: default avatarJon Maloy <jon.maloy@ericsson.com>
      Reviewed-by: default avatarYing Xue <ying.xue@windriver.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a5377831
    • Jon Paul Maloy's avatar
      tipc: rename stack variables in function tipc_link_tunnel_rcv · 02842f71
      Jon Paul Maloy authored
      After the previous redesign of the tunnel reception algorithm and
      functions, we finalize it by renaming a couple of stack variables
      in tipc_tunnel_rcv(). This makes it more consistent with the naming
      scheme elsewhere in this part of the code.
      
      This change is purely cosmetic, with no functional changes.
      Signed-off-by: default avatarJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      02842f71
    • Jon Paul Maloy's avatar
      tipc: more cleanup of tunnelling reception function · 1e9d47a9
      Jon Paul Maloy authored
      We simplify and slim down the code in function tipc_tunnel_rcv()
      No impact on the users of this function.
      Signed-off-by: default avatarJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1e9d47a9
    • Jon Paul Maloy's avatar
      tipc: change signature of tunnelling reception function · 3bb53380
      Jon Paul Maloy authored
      After the earlier commits in this series related to the function
      tipc_link_tunnel_rcv(), we can now go further and simplify its
      signature.
      
      The function now consumes all DUPLICATE packets, and only returns such
      ORIGINAL packets that are ready for immediate delivery, i.e., no
      more link level protocol processing needs to be done by the caller.
      As a consequence, the the caller, tipc_rcv(), does not access the link
      pointer after call return, and it becomes unnecessary to pass a link
      pointer reference in the call. Instead, we now only pass it the tunnel
      link's owner node, which is sufficient to find the destination link for
      the tunnelled packet.
      Signed-off-by: default avatarJon Maloy <jon.maloy@ericsson.com>
      Reviewed-by: default avatarYing Xue <ying.xue@windriver.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3bb53380
    • Jon Paul Maloy's avatar
      tipc: change reception of tunnelled failover packets · f006c9c7
      Jon Paul Maloy authored
      When a link is reset, and there is a redundant link available, all
      sender sockets will steer their subsequent traffic through the
      remaining link. In order to guarantee preserved packet order and
      cardinality during the transition, we tunnel the failing link's send
      queue through the remaining link before we allow any sockets to use it.
      
      In this commit, we change the algorithm for receiving failover
      ("ORIGINAL_MSG") packets in tipc_link_tunnel_rcv(), at the same time
      delegating it to a new subfuncton, tipc_link_failover_rcv(). Instead
      of directly returning an extracted inner packet to the packet reception
      loop in tipc_rcv(), we first check if it is a message fragment, in which
      case we append it to the reset link's fragment chain. If the fragment
      chain is complete, we return the whole chain instead of the individual
      buffer, eliminating any need for the tipc_rcv() loop to do reassembly of
      tunneled packets.
      
      This change makes it possible to further simplify tipc_link_tunnel_rcv(),
      as well as the calling tipc_rcv() loop. We will do that in later
      commits. It also makes it possible to identify a single spot in the code
      where we can tell that a failover procedure is finished, something that
      is useful when we are deleting links after a failover. This will also
      be done in a later commit.
      Signed-off-by: default avatarJon Maloy <jon.maloy@ericsson.com>
      Reviewed-by: default avatarYing Xue <ying.xue@windriver.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f006c9c7
    • Jon Paul Maloy's avatar
      tipc: change reception of tunnelled duplicate packets · 1dab3d5a
      Jon Paul Maloy authored
      When a second link to a destination comes up, some sender sockets will
      steer their subsequent traffic through the new link. In order to
      guarantee preserved packet order and cardinality for those sockets, we
      tunnel a duplicate of the old link's send queue through the new link
      before we open it for regular traffic. The last arriving packet copy,
      on whichever link, will be dropped at the receiving end based on the
      original sequence number, to ensure that only one copy is delivered to
      the end receiver.
      
      In this commit, we change the algorithm for receiving DUPLICATE_MSG
      packets, at the same time delegating it to a new subfunction,
      tipc_link_dup_rcv(). Instead of returning an extracted inner packet to
      the packet reception loop in tipc_rcv(), we just add it to the receiving
      (new) link's deferred packet queue. The packet will then be processed by
      that link when it receives its first non-tunneled packet, i.e., at
      latest when the changeover procedure is finished.
      
      Because tipc_link_tunnel_rcv()/tipc_link_dup_rcv() now is consuming all
      packets of type DUPLICATE_MSG, the calling tipc_rcv() function can omit
      testing for this. This in turn means that the current conditional jump
      to the label 'protocol_check' becomes redundant, and we can remove that
      label.
      Signed-off-by: default avatarJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: default avatarYing Xue <ying.xue@windriver.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1dab3d5a
    • Ying Xue's avatar
      tipc: remove 'links' list from tipc_bearer struct · c61dd61d
      Ying Xue authored
      In our ongoing effort to simplify the TIPC locking structure,
      we see a need to remove the linked list for tipc_links
      in the bearer. This can be explained as follows.
      
      Currently, we have three different ways to access a link,
      via three different lists/tables:
      
      1: Via a node hash table:
         Used by the time-critical outgoing/incoming data paths.
         (e.g. link_send_sections_fast() and tipc_recv_msg() ):
      
      grab net_lock(read)
         find node from node hash table
         grab node_lock
             select link
             grab bearer_lock
                send_msg()
             release bearer_lock
         release node lock
      release net_lock
      
      2: Via a global linked list for nodes:
         Used by configuration commands (link_cmd_set_value())
      
      grab net_lock(read)
         find node and link from global node list (using link name)
         grab node_lock
             update link
         release node lock
      release net_lock
      
      (Same locking order as above. No problem.)
      
      3: Via the bearer's linked link list:
         Used by notifications from interface (e.g. tipc_disable_bearer() )
      
      grab net_lock(write)
         grab bearer_lock
            get link ptr from bearer's link list
            get node from link
            grab node_lock
               delete link
            release node lock
         release bearer_lock
      release net_lock
      
      (Different order from above, but works because we grab the
      outer net_lock in write mode first, excluding all other access.)
      
      The first major goal in our simplification effort is to get rid
      of the "big" net_lock, replacing it with rcu-locks when accessing
      the node list and node hash array. This will come in a later patch
      series.
      
      But to get there we first need to rewrite access methods ##2 and 3,
      since removal of net_lock would introduce three major problems:
      
      a) In access method #2, we access the link before taking the
         protecting node_lock. This will not work once net_lock is gone,
         so we will have to change the access order. We will deal with
         this in a later commit in this series, "tipc: add node lock
         protection to link found by link_find_link()".
      
      b) When the outer protection from net_lock is gone, taking
         bearer_lock and node_lock in opposite order of method 1) and 2)
         will become an obvious deadlock hazard. This is fixed in the
         commit ("tipc: remove bearer_lock from tipc_bearer struct")
         later in this series.
      
      c) Similar to what is described in problem a), access method #3
         starts with using a link pointer that is unprotected by node_lock,
         in order to via that pointer find the correct node struct and
         lock it. Before we remove net_lock, this access order must be
         altered. This is what we do with this commit.
      
      We can avoid introducing problem problem c) by even here using the
      global node list to find the node, before accessing its links. When
      we loop though the node list we use the own bearer identity as search
      criteria, thus easily finding the links that are associated to the
      resetting/disabling bearer. It should be noted that although this
      method is somewhat slower than the current list traversal, it is in
      no way time critical. This is only about resetting or deleting links,
      something that must be considered relatively infrequent events.
      
      As a bonus, we can get rid of the mutual pointers between links and
      bearers. After this commit, pointer dependency go in one direction
      only: from the link to the bearer.
      
      This commit pre-empts introduction of problem c) as described above.
      Signed-off-by: default avatarYing Xue <ying.xue@windriver.com>
      Reviewed-by: default avatarPaul Gortmaker <paul.gortmaker@windriver.com>
      Signed-off-by: default avatarJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c61dd61d
    • Ying Xue's avatar
      tipc: redefine 'started' flag in struct link to bitmap · 135daee6
      Ying Xue authored
      Currently, the 'started' field in struct tipc_link represents only a
      binary state, 'started' or 'not started'. We need it to represent
      more link execution states in the coming commits in this series.
      Hence, we rename the field to 'flags', and define the current
      started/non-started state to be represented by the LSB bit of
      that field.
      Signed-off-by: default avatarYing Xue <ying.xue@windriver.com>
      Reviewed-by: default avatarPaul Gortmaker <paul.gortmaker@windriver.com>
      Signed-off-by: default avatarJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      135daee6
    • Ying Xue's avatar
      tipc: move code for deleting links from bearer.c to link.c · 8d8439b6
      Ying Xue authored
      We break out the code for deleting attached links in the
      function bearer_disable(), and define a new function named
      tipc_link_delete_list() to do this job.
      
      This commit incurs no functional changes, but makes the code of
      function bearer_disable() cleaner. It is also a preparation
      for a more important change to the bearer code, in a subsequent
      commit in this series.
      Signed-off-by: default avatarYing Xue <ying.xue@windriver.com>
      Reviewed-by: default avatarPaul Gortmaker <paul.gortmaker@windriver.com>
      Signed-off-by: default avatarJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8d8439b6
    • Ying Xue's avatar
      tipc: move code for resetting links from bearer.c to link.c · e0ca2c30
      Ying Xue authored
      We break out the code for resetting attached links in the
      function tipc_reset_bearer(), and define a new function named
      tipc_link_reset_list() to do this job.
      
      This commit incurs no functional changes, but makes the code
      of function tipc_reset_bearer() cleaner. It is also a preparation
      for a more important change to the bearer code, in a subsequent
      commit in this series.
      Signed-off-by: default avatarYing Xue <ying.xue@windriver.com>
      Reviewed-by: default avatarPaul Gortmaker <paul.gortmaker@windriver.com>
      Signed-off-by: default avatarJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e0ca2c30
    • Jon Paul Maloy's avatar
      tipc: stricter behavior of message reassembly function · 03b92017
      Jon Paul Maloy authored
      The function tipc_link_recv_fragment(struct sk_buff **buf) currently
      leaves the value of the input buffer pointer undefined when it returns,
      except when the return code indicates that the reassembly is complete.
      This despite the fact that it always consumes the input buffer.
      
      Here, we enforce a stricter behavior by this function, ensuring that
      the returned buffer pointer is non-NULL if and only if the reassembly
      is complete. This makes it possible to test for the buffer pointer as
      criteria for successful reassembly.
      
      We also rename the function to tipc_link_frag_rcv(), which is both
      shorter and more in line with common naming practice in the network
      subsystem.
      
      Apart from the new name, these changes have no impact on current
      users of the function, but makes it more practical for use in some
      planned future commits.
      Signed-off-by: default avatarJon Maloy <jon.maloy@ericsson.com>
      Reviewed-by: default avatarYing Xue <ying.xue@windriver.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      03b92017
    • Andreas Bofjäll's avatar
      tipc: explicitly include core.h in addr.h · b3f0f5c3
      Andreas Bofjäll authored
      The inline functions in addr.h uses tipc_own_addr which is exported by
      core.h, but addr.h never actually includes it. It works because it is
      explicitly included where this is used, but it looks a bit strange.
      
      Include core.h in addr.h explicitly to make the dependency clearer.
      Signed-off-by: default avatarAndreas Bofjäll <andreas.bofjall@ericsson.com>
      Reviewed-by: default avatarJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b3f0f5c3
    • dingtianhong's avatar
      bonding: remove the redundant judgements for bond_option_queue_id_set() · c313c89e
      dingtianhong authored
      The dev_valid_name() will check the buffer length for input name, no need to
      check it twice.
      
      Cc: Jay Vosburgh <fubar@us.ibm.com>
      Cc: Veaceslav Falico <vfalico@redhat.com>
      Cc: Andy Gospodarek <andy@greyhouse.net>
      Signed-off-by: default avatarDing Tianhong <dingtianhong@huawei.com>
      Reviewed-by: default avatarJiri Pirko <jiri@resnulli.us>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c313c89e
    • dingtianhong's avatar
      bonding: remove the redundant judgements for bond_set_mac_address() · 805d157e
      dingtianhong authored
      The dev_set_mac_address() will check the dev->netdev_ops->ndo_set_mac_address,
      so no need to check it in bond_set_mac_address().
      
      Cc: Jay Vosburgh <fubar@us.ibm.com>
      Cc: Veaceslav Falico <vfalico@redhat.com>
      Cc: Andy Gospodarek <andy@greyhouse.net>
      Signed-off-by: default avatarDing Tianhong <dingtianhong@huawei.com>
      Reviewed-by: default avatarJiri Pirko <jiri@resnulli.us>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      805d157e
    • WANG Cong's avatar
      net: allow setting mac address of loopback device · 25f929fb
      WANG Cong authored
      We are trying to mirror the local traffic from lo to eth0,
      allowing setting mac address of lo to eth0 would make
      the ether addresses in these packets correct, so that
      we don't have to modify the ether header again.
      
      Since usually no one cares about its mac address (all-zero),
      it is safe to allow those who care to set its mac address.
      
      Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
      Cc: Neil Horman <nhorman@tuxdriver.com>
      Cc: Stephen Hemminger <stephen@networkplumber.org>
      Cc: Eric Dumazet <edumazet@google.com>
      Cc: David S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarCong Wang <xiyou.wangcong@gmail.com>
      Acked-by: default avatarNeil Horman <nhorman@tuxdriver.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      25f929fb
    • David S. Miller's avatar
      Merge branch 'i40e' · 0e42aa4f
      David S. Miller authored
      Aaron Brown says:
      
      ====================
      Intel Wired LAN Driver Updates
      
      This series contains updates to i40e and i40evf, primarily reset
      handling / refactoring along with a fair amount of minor cleanup.
      
      Jesse fixes some spelling, bumps the version and other trivial fixes.
      Akeem sets a bit that is needed before shutdown in the case of
      tx_timeout recovery failure.  Mitch refactors reset handling along
      with a whole bunch of clean up.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0e42aa4f