From: Hugh Dickins <hugh@veritas.com>

Remove copy flag and code from loop_copy_bio: wasn't used when reading, and
waste of time when writing - the loop transfer function does that.  And
don't initialize bio fields immediately reinitialized by caller.

From: Hugh Dickins <hugh@veritas.com>

Now it's in loop not bio, better rename bio_copy to loop_copy_bio: loop
prefers names that way; and bio_transfer better named loop_transfer_bio.
Rename bio,b to rbh,bio to follow call from loop_get_buffer more easily.

From: Hugh Dickins <hugh@veritas.com>

bio_copy is used only by the loop driver, which already has to walk the bio
segments itself: so it makes sense to change it from bio.c export to loop.c
static, as prelude to working upon it there.

bio_copy itself is unchanged by this patch, with one exception.  On oom
failure it must use bio_put, instead of mempool_free to static bio_pool:
which it should have been doing all along - it was leaking the veclist.

(Grudgingly acked by Jens)

From: Hugh Dickins <hugh@veritas.com>

When loop restricts underlying file's allocation mask to avoid deadlock, it
unintentionally masks out its highmem capability, making failures at the
underlying level much more likely.

From: "Ni, Michael" <Michael.Ni@hp.com>

s/Compaq/HP/ in MAINTAINERS.

From: Christoph Hellwig <hch@lst.de>

currently only x86_64 and ia64 don't use the generic irq_cpustat code
and both have to workaround it's brokenness for the non-default case.

x86_64 defines an empty irq_cpustat_t even if it doesn't need one and
ia64 adds CONFIG_IA64 ifdefs around all users.  What about this patch
instead to make __ARCH_IRQ_STAT useable?

Ensure that the arch exit routines are always called when needed,
previously we could end up with a nasty crash if using oprofile.timer=1,
or the FS register failed.

Remove some useless code, from Philippe Elie.

Update the version information.

Export the task->tgid to userspace as well. This is needed
for forthcoming thread profiling stuff and should have been
done in the original patch ... oh well.

This requires an upgrade to oprofile 0.5.3. You can get it from
the website, or, for the impatient, here :

	http://movementarian.org/oprofile-0.5.3.tar.gz

into home.transmeta.com:/home/torvalds/v2.5/linux

into osdl.org:/home/mochel/src/kernel/devel/linux-2.5-core

into home.transmeta.com:/home/torvalds/v2.5/linux

Patch from Nicolas Pitre

> Patch #1540/1 has had the following note added:
> 
> Ok, it seems that we've had this for years and years, and it hasn't been
> causing a problem.  We've now got -Wa,-mno-fpu which should catch anything
> which shouldn't be used anyway.
> 
> Could you send a new patch for this change please?
> 
> Update by: Russell King

Here it is.

Patch from Peter Milne

Peripheral Memory Mapped Register defs for Messaging, PBI, DMA, I2C

Patch from Nicolas Pitre

The -march=armv5te issue looks to be fixed in gcc-3.3.
Since gcc-3.3 is the only gcc version >= 3 that seems to correctly
compile kernels out of the box I think it would be reasonable to
apply this patch and no bother with older gcc versions.

Yet gcc-3.3 emits V5TE instructions only when -mcpu=xscale is used,
but that seems to have been fixed in current CVS so next gcc release
will use all available instructions properly with -march=armv5te.

Patch from Deepak Saxena

This patch adds some hooks to arch/arm/Makefile to enable proper building
of big-endian kernels.  It also adds an option to the the top level
arm KConfig that only allows a big-endian kernel to be built if the sub-arch
KConfig sets the CONFIG_ARCH_SUPPORTS_BIG_ENDIAN boolean to true. This is
mainly there to keep people from attemtpting to build a big-endian kernel
for a system that is not capable of running in big-endian mode.

Patch from Deepak Saxena

into home.transmeta.com:/home/torvalds/v2.5/linux

Rename the socket_info_t inside tcic.c to struct tcic_socket. At one
time there were at least five different "socket_info_t" within cardmgr
/ linux/drivers/pcmcia. Let's get rid of all of them to avoid
confusion in future.

Rename the socket_info_t inside tcic.c to struct i82365_socket. At one
time there were at least five different "socket_info_t" within cardmgr
/ linux/drivers/pcmcia. Let's get rid of all of them to avoid
confusion in future.

The i82365 doesn't work unless CONFIG_ISA is set -- see this from
i82365_init:

...

    sockets = 0;

#ifdef CONFIG_ISA
    isa_probe();
#endif

    if (sockets == 0) {
        printk("not found.\n");
        driver_unregister(&i82365_driver);
        return -ENODEV;
    }

...

So, remove all instances of CONFIG_ISA from i82365.c and add a
dependency to the Kconfig file.

Get rid of the

typedef struct pcmcia_socket socket_info_t;

by replacing all remaining usages of cs_internal's socket_info_t with
struct pcmcia_socket.

Linus said [on April 25th of this year]:
> There are two reasons I did pci_socket, and one of them is stale
> and the other one is a matter of taste.

As the second reason is stale now, too, unify yenta.c and
pci_socket.c.

Remove socket_no from struct pcmcia_bus_socket - it's only used in
printks, and the one additional level of indirection doesn't hurt there.

 ds.c |   10 ++++------
 1 files changed, 4 insertions(+), 6 deletions(-)

Replace the socket number with struct pcmcia_socket from mtd_bind_t
and bind_req_t.

 drivers/pcmcia/cs.c |    4 ++--
 drivers/pcmcia/ds.c |    6 +++---
 include/pcmcia/cs.h |    4 ++--
 3 files changed, 7 insertions(+), 7 deletions(-)

As "socket_no" is deprecated, replace it with struct pcmcia_socket in 
client_handle_t.

 bulkmem.c     |    4 ++--
 cs.c          |   22 ++++++++++------------
 cs_internal.h |    4 ++--
 3 files changed, 14 insertions(+), 16 deletions(-)

This patch updates the callbacks to the socket drivers to take the
corresponding struct pcmcia_socket as argument instead of the "socket
number".

 drivers/pcmcia/bulkmem.c    |    6 +++---
 drivers/pcmcia/cistpl.c     |    4 ++--
 drivers/pcmcia/cs.c         |   18 +++++++++---------
 drivers/pcmcia/i82092.c     |   36 +++++++++++++++++++++++-------------
 drivers/pcmcia/i82092aa.h   |   20 ++++++++++----------
 drivers/pcmcia/i82365.c     |   34 +++++++++++++++++++++++-----------
 drivers/pcmcia/pci_socket.c |   40 ++++++++++++++++++++--------------------
 drivers/pcmcia/rsrc_mgr.c   |    2 +-
 drivers/pcmcia/tcic.c       |   35 ++++++++++++++++++-----------------
 include/pcmcia/ss.h         |   22 ++++++++++++----------
 10 files changed, 121 insertions(+), 96 deletions(-)

Re-enable the suspend and resume methods for SA11xx PCMCIA devices,
and update the initialisation/cleanup code for Dominik's recent
changes.

Add a more sane socket registration interface.

Previously, it was messed up because Greg's struct class hadn't been
invented when I wrote the code: there may be multiple sockets per
"struct device", and there is the need for one "struct class_device"
for each socket.

 drivers/pcmcia/cs.c         |  217 +++++++++++++++++++++----------------------- drivers/pcmcia/ds.c         |   56 ++---------
 drivers/pcmcia/i82092.c     |   48 ++++-----
 drivers/pcmcia/i82365.c     |   41 ++++----
 drivers/pcmcia/pci_socket.c |   23 +---
 drivers/pcmcia/pci_socket.h |    2
 drivers/pcmcia/tcic.c       |   38 ++++---
 include/pcmcia/ss.h         |   25 +++--
 8 files changed, 210 insertions(+), 240 deletions(-)

Split up the socket initialization in cs.c into two pieces:

        pcmcia_register_socket / pcmcia_unregister_socket 
will focus on registering sockets with the device core in future, set
all necessary fields etc.

        pcmcia_add_socket / pcmcia_remove_socket 
will use an interface to the device class "pcmcia_socket_class" in
future, and mainly take care of what initialization cs.c needs to work
properly.

This patch is almost completely limited to shuffling code around

 cs.c |  157 +++++++++++++++++++++++++++++++++++-------------------------------- 1 files changed, 83 insertions(+), 74 deletions(-)

From Jeremy Fitzhardinge:

With the current system device changes (I picked them up in 2.5.70-mm8),
the system device class assumes that all system device drivers are
registered before any system devices are registered.

Unfortunately, this is often not the case.  CPU devices are registered
very early, but cpufreq registers drivers for them; since cpufreq
drivers can be loaded as modules, they clearly can't be registered
before the device is.

This patch keeps a list of all registered devices hanging off the system
device class.  When a new driver is registered, it calls the driver's
add() function with all existing devices.

Conversely, when a driver is unregistered, it calls the driver's
remove() function for all existing devices so the driver can clean up.

Note: the list in the class's embedded kset is used, rather than creating
a new field.

From Greg: 

I took out the other put_device() in the -bk tree in class_device_del() 
but forgot to remove this one. 

From Greg Kroah-Hartman

into home.transmeta.com:/home/torvalds/v2.5/linux

into kroah.com:/home/greg/linux/BK/i2c-2.5