- 25 Jan, 2005 40 commits
-
-
Dominik Brodowski authored
From: Randy Dunlap <rddunlap@osdl.org> i82092: check return value from request_region() correctly; apparently unused for awhile now; Signed-off-by:
Randy Dunlap <rddunlap@osdl.org> Signed-off-by:
Dominik Brodowski <linux@brodo.de> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Dominik Brodowski authored
From: Randy Dunlap <rddunlap@osdl.org> Use CONFIG_PNP consistenly, for allocating and freeing resources, drop __ISAPNP__. Signed-off-by:
-
Dominik Brodowski authored
From: Randy Dunlap <rddunlap@osdl.org> tcic: eliminate deprecated check_region(); Signed-off-by:
-
Roland Dreier authored
The cap_mask_mutex needs to be initialized before ib_register_device(), because device registration will call client init functions that may try to modify the capability mask. Signed-off-by:
Roland Dreier <roland@topspin.com> Signed-off-by:
-
Roland Dreier authored
Get rid of the x86 SSE code for atomic 64-bit writes to doorbell registers. Saving/setting CR0 plus a clts instruction are too expensive for it to ever be a win, and the config option was just confusing. Signed-off-by:
-
Roland Dreier authored
From: "Michael S. Tsirkin" <mst@mellanox.co.il> Here are misc fixes for mthca mapping: 1. Thinkably, MSI tables or another region could fall between HCR and ECR tables. Thus its arguably wrong to map both tables in one region. So, do it separately. I think its also more readable to have ecr_base and access ecr there, not access ecr with hcr pointer. 2. mthca_request_regions error handling was borken (wrong order of cleanups). For example on all errors pci_release_region was called which is wrong if the region was not yet mapped. And other such cleanups. 3. Fixed some error messages too. Signed-off-by:
-
Roland Dreier authored
Implement setting/clearing IsSM port capability bit from userspace via "issm" special files (set IsSM bit on open, clear on close). Signed-off-by:
-
Roland Dreier authored
Replace uses of yield() with msleep(1) as suggested by kernel janitors. Signed-off-by:
-
Roland Dreier authored
When we switch to interrupt-driven command mode, test interrupt generation with a NOP firmware command. Broken MSI/MSI-X and interrupt line routing problems seem to be very common, and this makes the error message much clearer -- before this change we would mysteriously fail when initializing the QP table. Signed-off-by:
-
Roland Dreier authored
From: "Michael S. Tsirkin" <mst@mellanox.co.il> Event queue handling performance improvements: - Only calculate EQ entry address once, and don't truncate the consumer index until we really need to. - Only read ECR once. If a new event occurs while we're in the interrupt handler, we'll get another interrupt anyway, since we only clear events once. Signed-off-by:
Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by:
-
Roland Dreier authored
From: "Michael S. Tsirkin" <mst@mellanox.co.il> Pass full extended MAD information to firmware when a work completion is supplied to the MAD_IFC command. This allows B_Key checking/trap generation. Signed-off-by:
-
Roland Dreier authored
From: "Michael S. Tsirkin" <mst@mellanox.co.il> We don't need to write to the ECR to clear events when using MSI-X, since we never read the ECR anyway. Signed-off-by:
-
Roland Dreier authored
Correct defines of port capability mask enum values (bits were ordered backwards) and add new capability bits from IBA spec version 1.2. Signed-off-by:
-
Roland Dreier authored
Implement the port_modify() device method for mthca using the SET_IB firmware command. In particular this allows changing the port capability mask. Signed-off-by:
-
Roland Dreier authored
Continue development of Arbel Mem-Free support: we now compute a valid profile, allocate context memory, map sufficient aux memory for HCA page tables, map sufficient context memory to cover all reserved firmware resources and successfully call the INIT_HCA and QUERY_ADAPTER firmware commands. Fix a few error gotos that unwound the wrong things. Signed-off-by:
-
Roland Dreier authored
Slightly tidy up Andi Kleen's compat_ioctl conversion for the InfiniBand MAD driver by removing the no-longer-needed include of ioctl32.h, killing unreachable code and doing some really anal whitespace fixing. Signed-off-by:
-
Anton Blanchard authored
Rename device_init to make it more unique. Useful when looking through debug initcall bootlogs. While I'm in the area, also make it static. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
Anton Blanchard authored
Create a cond_syscall for sys32_sysctl and make all architectures use it. Also fix the architectures that dont wrap their 32bit compat sysctl code. Signed-off-by:
-
James Nelson authored
After getting in touch with the listed maintainer of the ARM26 floppy and hard drive maintainer, I found out that he had passed it on to Ian Molton. Signed-off-by:
James Nelson <james4765@gmail.com> Signed-off-by:
-
Kevin Corry authored
In stripe_map(), change chunk to 64-bit and use do_div to divide and mod by the number of stripes. Signed-off-by:
-
Alasdair G. Kergon authored
Improve performance by optionally bypassing some code that uses bdget. Signed-Off-By:
Alasdair G Kergon <agk@redhat.com> Signed-off-by:
-
Alasdair G. Kergon authored
Add optional callback before each device gets suspended (called 'presuspend'). Rename existing callback used by dm-mirror from 'suspend' to 'postsuspend'. dm-multipath will use the new callback. (Any kernel module using device-mapper must be recompiled after this patch.) Signed-Off-By:
-
Alasdair G. Kergon authored
Remove unused bs_bio_init(). Signed-Off-By:
-
Alasdair G. Kergon authored
Fix module reference counting for mirror log type. Signed-Off-By:
-
Andreas Gruenbacher authored
This one slipped me. The "real" wait queue is defined some lines further down inside the loop. Signed-off-by:
Andreas Gruenbacher <agruen@suse.de> Signed-off-by:
-
Daniel Drake authored
Adds a boot parameter which can be used to specify a delay (in seconds) before the root device is decoded/discovered/mounted. Example usage for 10 second delay: rootdelay=10 Useful for usb-storage devices which no longer make their partitions immediately available, and for other storage devices which require some "spin-up" time. Signed-off-by:
Daniel Drake <dsd@gentoo.org> Signed-off-by:
-
John W. Linville authored
This fixes a "no sound" problem with Wolfenstein Enemy Territory and (apparently) other games using the Quake3 engine. It probably affects some other OSS applications as well. This recreates some code that had been removed from the i810_audio driver around 5/2004. (This is the 2.6-based version of this patch.) Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Acked-by:
Thomas Voegtle <tv@lio96.de> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Matthew Wilcox authored
Port Andreas Dilger's and Jan Kara's patch for ext3 to ext2. Also some whitespace changes to get ext2/ext3 closer in sync. Signed-off-by:
Matthew Wilcox <matthew@wil.cx> Signed-off-by:
-
Andreas Gruenbacher authored
This patch removes the arbitrary limit of 32 acl entries on ext[23] when writing acls. A patch that removes the same check when reding acls is in BK since 12 March 2004, so all kernels since then are already able to read large acls. I think that ten+ months are enough so that we can now also remove the write limit. This is the read-limit patch: http://linux.bkbits.net:8080/linux-2.6/cset%404051e2863UsuQEgAQShmimgBooAXkg?nav=index.html Even without this patch the xattr block could already contain less space than needed for the acl, because other attributes might already use up almost all space. So this patch does not introduce additional error conditions. We have been shipping with this patch the last year (almost). Signed-off-by:
-
Andreas Gruenbacher authored
When a new inode is created, ext3_new_inode sets the EXT3_STATE_NEW flag, which tells ext3_do_update_inode to zero out the inode before filling in the inode's data. When a file is created in a directory with a default acl, the new inode inherits the directory's default acl; this generates attributes. The attributes are created before ext3_do_update_inode is called to write out the inode. In case of in-inode attributes, the new inode's attributes are written, and then zeroed out again by ext3_do_update_inode. Bad thing. Fix this by recognizing the EXT3_STATE_NEW case in ext3_xattr_set_handle, and zeroing out the inode there already when necessary. Signed-off-by:
-
Andreas Gruenbacher authored
When creating a filesystem with inodes bigger than 128 bytes, mke2fs fails to clear out bytes beyond EXT3_GOOD_OLD_INODE_SIZE in all inodes it creates (the journal, the filesystem root, and lost+found). We would require a zeroed-out i_extra_isize field but we don't get it, so disallow in-inode attributes for those inodes. Add an i_extra_isize sanity check. Signed-off-by:
-
Andreas Gruenbacher authored
We are checking for (EXT3_SB(inode->i_sb)->s_inode_size <= EXT3_GOOD_OLD_INODE_SIZE) to find out if we can set in-inode attributes; the test fails for inodes that have been created before the ea-in-inode patch. Those inodes have (i_extra_isize == 0), so we end up with the attributes overlapping the i_extra_isize field. Checking for (i_extra_isize == 0) instead fixes this case. The EXT3_STATE_XATTR flag is only set if (i_extra_isize > 0) and the inodes has in-inode attributes, so that is enough in the first two tests. Signed-off-by:
-
Andreas Gruenbacher authored
In-inode xattr entry descriptors are unsorted. Signed-off-by:
-
Andreas Gruenbacher authored
The xattr feature was only set when creating an xattr block. Also set it when creating in-inode xattrs. Signed-off-by:
-
Andreas Gruenbacher authored
ext3_xattr_delete_inode is called from ext3_free_inode which always has exclusive access to the inode, so there is no need to take the xattr semaphore. Signed-off-by:
-
Stone Wang authored
We found strange blocks layout in our mail server, after careful study, we got the reason and tried to fix it. On the very fist attempt to allocate a block to the newly-initialised inode, if we are trying to add a block at logical file offset "1" then ext2_find_goal() will incorrectly assume that this was a next_alloc_block cache hit (because we think the previously-allocated block was at offset zero). Net result: why trying to extend a freshly-opened one-block file we end up deciding to place the second file block at disk block "1", rather than going off and calling ext2_find_near(). Fix it by checking that we actually do have something valid cached in next_alloc_goal. Signed-off-by:
-
Steffen Klassert authored
With this patch get_ethtool_stats() provides the NIC-specific extra stats. Signed-off-by:
Steffen Klassert <klassert@mathematik.tu-chemnitz.de> Signed-off-by:
-
Brian Gerst authored
This patch cleans up usage of UTS_RELEASE, by replacing many references with system_utsname.release, and deleting others. This eliminates a dependency on version.h for these files, so they don't get rebuilt if EXTRAVERSION or localversion change. Signed-off-by:
Brian Gerst <bgerst@didntduck.org> Signed-off-by:
-
Christoph Hellwig authored
With Steffen Klassert <klassert@mathematik.tu-chemnitz.de> no more users left, time to kill the various implementations Signed-off-by:
-
Pavel Machek authored
This enables swsusp on SMP machines. It should be working in 2.6.10, already (but you may need noapic in 2.6.10). Signed-off-by:
-
