Skip to content

L
linux
Switch branch/tag
  1. 08 Feb, 2020 1 commit
  3. 07 Feb, 2020 15 commits
  5. 06 Feb, 2020 5 commits
  7. 05 Feb, 2020 13 commits
    • Chris Wilson's avatar
      drm/i915: Flush execution tasklets before checking request status · 602ddb41
      Chris Wilson authored 
      Rather than flushing the submission tasklets just before we sleep, flush
before we check the request status. Ideally this gives us a moment to
process the tasklets after sleeping just before we timeout.

v2: Compromise by pushing the flush prior to the timeout, but after the
check on completion so that we do not further delay the ready client.
Signed-off-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: default avatarMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200205095441.1769599-1-chris@chris-wilson.co.uk
      602ddb41
    • Chris Wilson's avatar
      drm/i915: Mark i915.reset as unsigned · aae970d8
      Chris Wilson authored 
      We have been using '-1' to mean the maximum i915.reset level in the
belief that it was unsigned... This turns out to have been a grave
error, and instead of setting the default reset mechanism in igt,
we have been disabling reset!
Signed-off-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: default avatarMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200205123757.1834947-1-chris@chris-wilson.co.uk
      aae970d8
    • Stanislav Lisovskiy's avatar
      drm/i915: Correctly map DBUF slices to pipes · ff2cd863
      Stanislav Lisovskiy authored 
      Added proper DBuf slice mapping to correspondent
pipes, depending on pipe configuration as stated
in BSpec.

v2:
    - Remove unneeded braces
    - Stop using macro for DBuf assignments as
      it seems to reduce readability.

v3: Start using enabled slices mask in dev_priv

v4: Renamed "enabled_slices" used in dev_priv
    to "enabled_dbuf_slices_mask"(Matt Roper)

v5: - Removed redundant parameters from
      intel_get_ddb_size function.(Matt Roper)
    - Made i915_possible_dbuf_slices static(Matt Roper)
    - Renamed total_width into total_width_in_range
      so that it now reflects that this is not
      a total pipe width but the one in current
      dbuf slice allowed range for pipe.(Matt Roper)
    - Removed 4th pipe for ICL in DBuf assignment
      table(Matt Roper)
    - Fixed wrong DBuf slice in DBuf table for TGL
      (Matt Roper)
    - Added comment regarding why we currently not
      using pipe ratio for DBuf assignment for ICL

v6: - Changed u32 to unsigned int in
      icl_get_first_dbuf_slice_offset function signature
      (Ville Syrjälä)
    - Changed also u32 to u8 in dbuf slice mask structure
      (Ville Syrjälä)
    - Switched from DBUF_S1_BIT to enum + explicit
      BIT(DBUF_S1) access(Ville Syrjälä)
    - Switched to named initializers in DBuf assignment
      arrays(Ville Syrjälä)
    - DBuf assignment arrays now use autogeneration tool
      from
      https://patchwork.freedesktop.org/series/70493/
      to avoid typos.
    - Renamed i915_find_pipe_conf to *_compute_dbuf_slices
      (Ville Syrjälä)
    - Changed platforms ordering in skl_compute_dbuf_slices
      to be from newest to oldest(Ville Syrjälä)

v7: - Now ORing assigned DBuf slice config always with DBUF_S1
      because slice 1 has to be constantly powered on.
      (Ville Syrjälä)

v8: - Added pipe_name for neater printing(Ville Syrjälä)
    - Renamed width_before_pipe to width_before_pipe_in_range,
      to better reflect that now all the calculations are happening
      inside DBuf range allowed by current pipe configuration mask
      (Ville Syrjälä)
    - Shortened FIXME comment message, regarding constant ORing with
      DBUF_S1(Ville Syrjälä)
    - Added .dbuf_mask named initializer to pipe assignment array
      (Ville Syrjälä)
    - Edited pipe assignment array to use only single DBuf slice
      for gen11 single pipe configurations, until "pipe ratio"
      thing is finally sorted out(Ville Syrjälä)
    - Removed unused parameter crtc_state for now(Ville Syrjälä)
      from icl/tgl_compute_dbuf_slices function
Reviewed-by: default avatarMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: default avatarStanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: default avatarVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200202230630.8975-7-stanislav.lisovskiy@intel.com
      ff2cd863
    • Stanislav Lisovskiy's avatar
      drm/i915: Manipulate DBuf slices properly · 0f0f9aee
      Stanislav Lisovskiy authored 
      Start manipulating DBuf slices as a mask,
but not as a total number, as current approach
doesn't give us full control on all combinations
of slices, which we might need(like enabling S2
only can't enabled by setting enabled_slices=1).

Removed wrong code from intel_get_ddb_size as
it doesn't match to BSpec. For now still just
use DBuf slice until proper algorithm is implemented.

Other minor code refactoring to get prepared
for major DBuf assignment changes landed:
- As now enabled slices contain a mask
  we still need some value which should
  reflect how much DBuf slices are supported
  by the platform, now device info contains
  num_supported_dbuf_slices.
- Removed unneeded assertion as we are now
  manipulating slices in a more proper way.

v2: Start using enabled_slices in dev_priv

v3: "enabled_slices" is now "enabled_dbuf_slices_mask",
    as this now sits in dev_priv independently.

v4: - Fixed debug print formatting to hex(Matt Roper)
    - Optimized dbuf slice updates to be used only
      if slice union is different from current conf(Matt Roper)
    - Fixed some functions to be static(Matt Roper)
    - Created a parameterized version for DBUF_CTL to
      simplify DBuf programming cycle(Matt Roper)
    - Removed unrequred field from GEN10_FEATURES(Matt Roper)

v5: - Removed redundant programming dbuf slices helper(Ville Syrjälä)
    - Started to use parameterized loop for hw readout to get slices
      (Ville Syrjälä)
    - Added back assertion checking amount of DBUF slices enabled
      after DC states 5/6 transition, also added new assertion
      as starting from ICL DMC seems to restore the last DBuf
      power state set, rather than power up all dbuf slices
      as assertion was previously expecting(Ville Syrjälä)

v6: - Now using enum for DBuf slices in this patch (Ville Syrjälä)
    - Removed gen11_assert_dbuf_enabled and put gen9_assert_dbuf_enabled
      back, as we really need to have a single unified assert here
      however currently enabling always slice 1 is enforced by BSpec,
      so we will have to OR enabled slices mask with 1 in order
      to be consistent with BSpec, that way we can unify that
      assertion and against the actual state from the driver, but
      not some hardcoded value.(concluded with Ville)
    - Remove parameterized DBUF_CTL version, to extract it to another
      patch.(Ville Syrjälä)
v7:
    - Removed unneeded hardcoded return value for older gens from
      intel_enabled_dbuf_slices_mask - this now is handled in a
      unified manner since device info anyway returns max dbuf slices
      as 1 for older platforms(Matthew Roper)
    - Now using INTEL_INFO(dev_priv)->num_supported_dbuf_slices instead
      of intel_dbuf_max_slices function as it is trivial(Matthew Roper)

v8: - Fixed icl_dbuf_disable to disable all dbufs still(Ville Syrjälä)

v9: - Renamed _DBUF_CTL_S to DBUF_CTL_S(Ville Syrjälä)
    - Now using power_domain mutex to protect from race condition, which
      can occur because intel_dbuf_slices_update might be running in
      parallel to gen9_dc_off_power_well_enable being called from
      intel_dp_detect for instance, which causes assertion triggered by
      race condition, as gen9_assert_dbuf_enabled might preempt this
      when registers were already updated, while dev_priv was not.
Reviewed-by: default avatarMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: default avatarVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: default avatarStanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: default avatarVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200202230630.8975-6-stanislav.lisovskiy@intel.com
      0f0f9aee
    • Stanislav Lisovskiy's avatar
      drm/i915: Introduce parameterized DBUF_CTL · 2570b7e3
      Stanislav Lisovskiy authored 
      Now start using parameterized DBUF_CTL instead
of hardcoded, this would allow shorter access
functions when reading or storing entire state.

Tried to implement it in a MMIO_PIPE manner, however
DBUF_CTL1 address is higher than DBUF_CTL2, which
implies that we have to now subtract from base
rather than add.

v2: - Removed unneeded DBUF_CTL_DIST and DBUF_CTL_ADDR
      macros. Started to use _PICK construct as suggested
      by Matt Roper.

v3: - _DBUF_CTL_S* to DBUF_CTL_S*, changed X to "slice"
      in macro(Ville Syrjälä)
    - Introduced enum for enumerating DBUF slices(Ville Syrjälä)
Reviewed-by: default avatarVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: default avatarMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: default avatarStanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: default avatarVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200202230630.8975-5-stanislav.lisovskiy@intel.com
      2570b7e3
    • Stanislav Lisovskiy's avatar
      drm/i915: Update dbuf slices only with full modeset · 85487cf4
      Stanislav Lisovskiy authored 
      During full modeset, global state(i.e dev_priv) is protected
by locking the crtcs in state, otherwise global state is not
serialized. Also if it is not a full modeset, we anyway
don't need to change DBuf slice configuration as Pipe configuration
doesn't change.
Reviewed-by: default avatarVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: default avatarStanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: default avatarVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200202230630.8975-4-stanislav.lisovskiy@intel.com
      85487cf4
    • Stanislav Lisovskiy's avatar
      drm/i915: Move dbuf slice update to proper place · b06cf595
      Stanislav Lisovskiy authored 
      Current DBuf slices update wasn't done in proper
place, especially its "post" part, which should
disable those only once vblank had passed and
all other changes are committed.

v2: Fix to use dev_priv and intel_atomic_state
    instead of skl_ddb_values
    (to be nuked in Villes patch)

v3: Renamed "enabled_slices" to "enabled_dbuf_slices_num"
    (Matt Roper)

v4: - Rebase against drm-tip.
    - Move post_update closer to optimize_watermarks,
      to prevent unneeded noise from underrun reporting
      (Ville Syrjälä)
Reviewed-by: default avatarMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: default avatarVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: default avatarStanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: default avatarVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200202230630.8975-3-stanislav.lisovskiy@intel.com
      b06cf595
    • Stanislav Lisovskiy's avatar
      drm/i915: Remove skl_ddl_allocation struct · 072fcc30
      Stanislav Lisovskiy authored 
      Current consensus that it is redundant as
we already have skl_ddb_values struct out there,
also this struct contains only single member
which makes it unnecessary.

v2: As dirty_pipes soon going to be nuked away
    from skl_ddb_values, evacuating enabled_slices
    to safer in dev_priv.

v3: Changed "enabled_slices" to be "enabled_dbuf_slices_num"
    (Matt Roper)

v4: - Wrapped the line getting number of dbuf slices(Matt Roper)
    - Removed indeed redundant skl_ddb_values declaration(Matt Roper)
Reviewed-by: default avatarMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: default avatarStanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: default avatarVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200202230630.8975-2-stanislav.lisovskiy@intel.com
      072fcc30
    • Chris Wilson's avatar
      drm/i915/display: Be explicit in handling the preallocated vma · 9c4ce97d
      Chris Wilson authored 
      As only the display codes tries to pin its preallocated framebuffer into
an exact location in the GGTT, remove the convenience function and make
the pin management explicit in the display code. Then throughout the
display management, we track the framebuffer and its plane->vma; with
less single purpose code and ready for first class i915_vma.

In doing so, this should fix the BUG_ON(vma->pages) on fi-kbl-soraka.
Signed-off-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: default avatarVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200204094801.877288-2-chris@chris-wilson.co.uk
      9c4ce97d
    • Chris Wilson's avatar
      drm/i915/display: Explicitly cleanup initial_plane_config · 1586f620
      Chris Wilson authored 
      I am about to stuff more objects into the plane_config and would like to
have it clean up after itself. Move the current framebuffer release into
a common function so it can be extended with the new object with
relative ease.
Signed-off-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: default avatarVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200204094801.877288-1-chris@chris-wilson.co.uk
      1586f620
    • Jani Nikula's avatar
      drm/i915/hdcp: move update pipe code to hdcp · 5758e073
      Jani Nikula authored 
      The DDI encoder code shouln't have to know about the guts of
HDCP. Abstract the pipe update code to a new intel_hdcp_update_pipe() in
intel_hdcp.c. No functional changes.

Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: default avatarAnshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: default avatarJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200128163803.5954-1-jani.nikula@intel.com
      5758e073
    • Lyude Paul's avatar
      drm/amd/dm/mst: Ignore payload update failures · 58fe03d6
      Lyude Paul authored 
      Disabling a display on MST can potentially happen after the entire MST
topology has been removed, which means that we can't communicate with
the topology at all in this scenario. Likewise, this also means that we
can't properly update payloads on the topology and as such, it's a good
idea to ignore payload update failures when disabling displays.
Currently, amdgpu makes the mistake of halting the payload update
process when any payload update failures occur, resulting in leaving
DC's local copies of the payload tables out of date.

This ends up causing problems with hotplugging MST topologies, and
causes modesets on the second hotplug to fail like so:

[drm] Failed to updateMST allocation table forpipe idx:1
------------[ cut here ]------------
WARNING: CPU: 5 PID: 1511 at
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link.c:2677
update_mst_stream_alloc_table+0x11e/0x130 [amdgpu]
Modules linked in: cdc_ether usbnet fuse xt_conntrack nf_conntrack
nf_defrag_ipv6 libcrc32c nf_defrag_ipv4 ipt_REJECT nf_reject_ipv4
nft_counter nft_compat nf_tables nfnetlink tun bridge stp llc sunrpc
vfat fat wmi_bmof uvcvideo snd_hda_codec_realtek snd_hda_codec_generic
snd_hda_codec_hdmi videobuf2_vmalloc snd_hda_intel videobuf2_memops
videobuf2_v4l2 snd_intel_dspcfg videobuf2_common crct10dif_pclmul
snd_hda_codec videodev crc32_pclmul snd_hwdep snd_hda_core
ghash_clmulni_intel snd_seq mc joydev pcspkr snd_seq_device snd_pcm
sp5100_tco k10temp i2c_piix4 snd_timer thinkpad_acpi ledtrig_audio snd
wmi soundcore video i2c_scmi acpi_cpufreq ip_tables amdgpu(O)
rtsx_pci_sdmmc amd_iommu_v2 gpu_sched mmc_core i2c_algo_bit ttm
drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec drm
crc32c_intel serio_raw hid_multitouch r8152 mii nvme r8169 nvme_core
rtsx_pci pinctrl_amd
CPU: 5 PID: 1511 Comm: gnome-shell Tainted: G           O      5.5.0-rc7Lyude-Test+ #4
Hardware name: LENOVO FA495SIT26/FA495SIT26, BIOS R12ET22W(0.22 ) 01/31/2019
RIP: 0010:update_mst_stream_alloc_table+0x11e/0x130 [amdgpu]
Code: 28 00 00 00 75 2b 48 8d 65 e0 5b 41 5c 41 5d 41 5e 5d c3 0f b6 06
49 89 1c 24 41 88 44 24 08 0f b6 46 01 41 88 44 24 09 eb 93 <0f> 0b e9
2f ff ff ff e8 a6 82 a3 c2 66 0f 1f 44 00 00 0f 1f 44 00
RSP: 0018:ffffac428127f5b0 EFLAGS: 00010202
RAX: 0000000000000002 RBX: ffff8d1e166eee80 RCX: 0000000000000000
RDX: ffffac428127f668 RSI: ffff8d1e166eee80 RDI: ffffac428127f610
RBP: ffffac428127f640 R08: ffffffffc03d94a8 R09: 0000000000000000
R10: ffff8d1e24b02000 R11: ffffac428127f5b0 R12: ffff8d1e1b83d000
R13: ffff8d1e1bea0b08 R14: 0000000000000002 R15: 0000000000000002
FS:  00007fab23ffcd80(0000) GS:ffff8d1e28b40000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f151f1711e8 CR3: 00000005997c0000 CR4: 00000000003406e0
Call Trace:
 ? mutex_lock+0xe/0x30
 dc_link_allocate_mst_payload+0x9a/0x210 [amdgpu]
 ? dm_read_reg_func+0x39/0xb0 [amdgpu]
 ? core_link_enable_stream+0x656/0x730 [amdgpu]
 core_link_enable_stream+0x656/0x730 [amdgpu]
 dce110_apply_ctx_to_hw+0x58e/0x5d0 [amdgpu]
 ? dcn10_verify_allow_pstate_change_high+0x1d/0x280 [amdgpu]
 ? dcn10_wait_for_mpcc_disconnect+0x3c/0x130 [amdgpu]
 dc_commit_state+0x292/0x770 [amdgpu]
 ? add_timer+0x101/0x1f0
 ? ttm_bo_put+0x1a1/0x2f0 [ttm]
 amdgpu_dm_atomic_commit_tail+0xb59/0x1ff0 [amdgpu]
 ? amdgpu_move_blit.constprop.0+0xb8/0x1f0 [amdgpu]
 ? amdgpu_bo_move+0x16d/0x2b0 [amdgpu]
 ? ttm_bo_handle_move_mem+0x118/0x570 [ttm]
 ? ttm_bo_validate+0x134/0x150 [ttm]
 ? dm_plane_helper_prepare_fb+0x1b9/0x2a0 [amdgpu]
 ? _cond_resched+0x15/0x30
 ? wait_for_completion_timeout+0x38/0x160
 ? _cond_resched+0x15/0x30
 ? wait_for_completion_interruptible+0x33/0x190
 commit_tail+0x94/0x130 [drm_kms_helper]
 drm_atomic_helper_commit+0x113/0x140 [drm_kms_helper]
 drm_atomic_helper_set_config+0x70/0xb0 [drm_kms_helper]
 drm_mode_setcrtc+0x194/0x6a0 [drm]
 ? _cond_resched+0x15/0x30
 ? mutex_lock+0xe/0x30
 ? drm_mode_getcrtc+0x180/0x180 [drm]
 drm_ioctl_kernel+0xaa/0xf0 [drm]
 drm_ioctl+0x208/0x390 [drm]
 ? drm_mode_getcrtc+0x180/0x180 [drm]
 amdgpu_drm_ioctl+0x49/0x80 [amdgpu]
 do_vfs_ioctl+0x458/0x6d0
 ksys_ioctl+0x5e/0x90
 __x64_sys_ioctl+0x16/0x20
 do_syscall_64+0x55/0x1b0
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7fab2121f87b
Code: 0f 1e fa 48 8b 05 0d 96 2c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff
ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01
f0 ff ff 73 01 c3 48 8b 0d dd 95 2c 00 f7 d8 64 89 01 48
RSP: 002b:00007ffd045f9068 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007ffd045f90a0 RCX: 00007fab2121f87b
RDX: 00007ffd045f90a0 RSI: 00000000c06864a2 RDI: 000000000000000b
RBP: 00007ffd045f90a0 R08: 0000000000000000 R09: 000055dbd2985d10
R10: 000055dbd2196280 R11: 0000000000000246 R12: 00000000c06864a2
R13: 000000000000000b R14: 0000000000000000 R15: 000055dbd2196280
---[ end trace 6ea888c24d2059cd ]---

Note as well, I have only been able to reproduce this on setups with 2
MST displays.

Changes since v1:
* Don't return false when part 1 or part 2 of updating the payloads
  fails, we don't want to abort at any step of the process even if
  things fail
Reviewed-by: default avatarMikita Lipski <Mikita.Lipski@amd.com>
Signed-off-by: default avatarLyude Paul <lyude@redhat.com>
Acked-by: default avatarHarry Wentland <harry.wentland@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
      58fe03d6
    • Alex Deucher's avatar
      drm/amdgpu: update default voltage for boot od table for navi1x · 7b913a76
      Alex Deucher authored 
      It needed to be updated as well so it will show the proper values
if you reset to the defaults.

Bug: https://gitlab.freedesktop.org/drm/amd/issues/1020Reviewed-by: default avatarEvan Quan <evan.quan@amd.com>
Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
      7b913a76
  9. 04 Feb, 2020 6 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7