- 13 Apr, 2023 7 commits
-
-
Paolo Abeni authored
In case of early fallback to TCP, subflow_syn_recv_sock() deletes the subflow context before returning the newly allocated sock to the caller. The fastopen path does not cope with the above unconditionally dereferencing the subflow context. Fixes: 36b122ba ("mptcp: add subflow_v(4,6)_send_synack()") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Paolo Abeni authored
As reported by Christoph, the mptcp protocol can run the worker when the relevant msk socket is in an unexpected state: connect() // incoming reset + fastclose // the mptcp worker is scheduled mptcp_disconnect() // msk is now CLOSED listen() mptcp_worker() Leading to the following splat: divide error: 0000 [#1] PREEMPT SMP CPU: 1 PID: 21 Comm: kworker/1:0 Not tainted 6.3.0-rc1-gde5e8fd0123c #11 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 Workqueue: events mptcp_worker RIP: 0010:__tcp_select_window+0x22c/0x4b0 net/ipv4/tcp_output.c:3018 RSP: 0018:ffffc900000b3c98 EFLAGS: 00010293 RAX: 000000000000ffd7 RBX: 000000000000ffd7 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff8214ce97 RDI: 0000000000000004 RBP: 000000000000ffd7 R08: 0000000000000004 R09: 0000000000010000 R10: 000000000000ffd7 R11: ffff888005afa148 R12: 000000000000ffd7 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88803ed00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000405270 CR3: 000000003011e006 CR4: 0000000000370ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> tcp_select_window net/ipv4/tcp_output.c:262 [inline] __tcp_transmit_skb+0x356/0x1280 net/ipv4/tcp_output.c:1345 tcp_transmit_skb net/ipv4/tcp_output.c:1417 [inline] tcp_send_active_reset+0x13e/0x320 net/ipv4/tcp_output.c:3459 mptcp_check_fastclose net/mptcp/protocol.c:2530 [inline] mptcp_worker+0x6c7/0x800 net/mptcp/protocol.c:2705 process_one_work+0x3bd/0x950 kernel/workqueue.c:2390 worker_thread+0x5b/0x610 kernel/workqueue.c:2537 kthread+0x138/0x170 kernel/kthread.c:376 ret_from_fork+0x2c/0x50 arch/x86/entry/entry_64.S:308 </TASK> This change addresses the issue explicitly checking for bad states before running the mptcp worker. Fixes: e16163b6 ("mptcp: refactor shutdown and close") Cc: stable@vger.kernel.org Reported-by: Christoph Paasch <cpaasch@apple.com> Link: https://github.com/multipath-tcp/mptcp_net-next/issues/374Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Tested-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Paolo Abeni authored
Beyond reducing code duplication this also avoids scheduling the mptcp_worker on a closed socket on some edge scenarios. The addressed issue is actually older than the blamed commit below, but this fix needs it as a pre-requisite. Fixes: ba8f48f7 ("mptcp: introduce mptcp_schedule_work") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Vladimir Oltean authored
I have observed an issue where the RX direction of the LS1028A ENETC pMAC seems unresponsive. The minimal procedure to reproduce the issue is: 1. Connect ENETC port 0 with a loopback RJ45 cable to one of the Felix switch ports (0). 2. Bring the ports up (MAC Merge layer is not enabled on either end). 3. Send a large quantity of unidirectional (express) traffic from Felix to ENETC. I tried altering frame size and frame count, and it doesn't appear to be specific to either of them, but rather, to the quantity of octets received. Lowering the frame count, the minimum quantity of packets to reproduce relatively consistently seems to be around 37000 frames at 1514 octets (w/o FCS) each. 4. Using ethtool --set-mm, enable the pMAC in the Felix and in the ENETC ports, in both RX and TX directions, and with verification on both ends. 5. Wait for verification to complete on both sides. 6. Configure a traffic class as preemptible on both ends. 7. Send some packets again. The issue is at step 5, where the verification process of ENETC ends (meaning that Felix responds with an SMD-R and ENETC sees the response), but the verification process of Felix never ends (it remains VERIFYING). If step 3 is skipped or if ENETC receives less traffic than approximately that threshold, the test runs all the way through (verification succeeds on both ends, preemptible traffic passes fine). If, between step 4 and 5, the step below is also introduced: 4.1. Disable and re-enable PM0_COMMAND_CONFIG bit RX_EN then again, the sequence of steps runs all the way through, and verification succeeds, even if there was the previous RX traffic injected into ENETC. Traffic sent *by* the ENETC port prior to enabling the MAC Merge layer does not seem to influence the verification result, only received traffic does. The LS1028A manual does not mention any relationship between PM0_COMMAND_CONFIG and MMCSR, and the hardware people don't seem to know for now either. The bit that is toggled to work around the issue is also toggled by enetc_mac_enable(), called from phylink's mac_link_down() and mac_link_up() methods - which is how the workaround was found: verification would work after a link down/up. Fixes: c7b9e808 ("net: enetc: add support for MAC Merge layer") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20230411192645.1896048-1-vladimir.oltean@nxp.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
Xin Long authored
Currently, when traversing ifwdtsn skips with _sctp_walk_ifwdtsn, it only checks the pos against the end of the chunk. However, the data left for the last pos may be < sizeof(struct sctp_ifwdtsn_skip), and dereference it as struct sctp_ifwdtsn_skip may cause coverflow. This patch fixes it by checking the pos against "the end of the chunk - sizeof(struct sctp_ifwdtsn_skip)" in sctp_ifwdtsn_skip, similar to sctp_fwdtsn_skip. Fixes: 0fc2ea92 ("sctp: implement validate_ftsn for sctp_stream_interleave") Signed-off-by: Xin Long <lucien.xin@gmail.com> Link: https://lore.kernel.org/r/2a71bffcd80b4f2c61fac6d344bb2f11c8fd74f7.1681155810.git.lucien.xin@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
Ziyang Xuan authored
Syzbot reported a bug as following: ===================================================== BUG: KMSAN: uninit-value in qrtr_tx_resume+0x185/0x1f0 net/qrtr/af_qrtr.c:230 qrtr_tx_resume+0x185/0x1f0 net/qrtr/af_qrtr.c:230 qrtr_endpoint_post+0xf85/0x11b0 net/qrtr/af_qrtr.c:519 qrtr_tun_write_iter+0x270/0x400 net/qrtr/tun.c:108 call_write_iter include/linux/fs.h:2189 [inline] aio_write+0x63a/0x950 fs/aio.c:1600 io_submit_one+0x1d1c/0x3bf0 fs/aio.c:2019 __do_sys_io_submit fs/aio.c:2078 [inline] __se_sys_io_submit+0x293/0x770 fs/aio.c:2048 __x64_sys_io_submit+0x92/0xd0 fs/aio.c:2048 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was created at: slab_post_alloc_hook mm/slab.h:766 [inline] slab_alloc_node mm/slub.c:3452 [inline] __kmem_cache_alloc_node+0x71f/0xce0 mm/slub.c:3491 __do_kmalloc_node mm/slab_common.c:967 [inline] __kmalloc_node_track_caller+0x114/0x3b0 mm/slab_common.c:988 kmalloc_reserve net/core/skbuff.c:492 [inline] __alloc_skb+0x3af/0x8f0 net/core/skbuff.c:565 __netdev_alloc_skb+0x120/0x7d0 net/core/skbuff.c:630 qrtr_endpoint_post+0xbd/0x11b0 net/qrtr/af_qrtr.c:446 qrtr_tun_write_iter+0x270/0x400 net/qrtr/tun.c:108 call_write_iter include/linux/fs.h:2189 [inline] aio_write+0x63a/0x950 fs/aio.c:1600 io_submit_one+0x1d1c/0x3bf0 fs/aio.c:2019 __do_sys_io_submit fs/aio.c:2078 [inline] __se_sys_io_submit+0x293/0x770 fs/aio.c:2048 __x64_sys_io_submit+0x92/0xd0 fs/aio.c:2048 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd It is because that skb->len requires at least sizeof(struct qrtr_ctrl_pkt) in qrtr_tx_resume(). And skb->len equals to size in qrtr_endpoint_post(). But size is less than sizeof(struct qrtr_ctrl_pkt) when qrtr_cb->type equals to QRTR_TYPE_RESUME_TX in qrtr_endpoint_post() under the syzbot scenario. This triggers the uninit variable access bug. Add size check when qrtr_cb->type equals to QRTR_TYPE_RESUME_TX in qrtr_endpoint_post() to fix the bug. Fixes: 5fdeb0d3 ("net: qrtr: Implement outgoing flow control") Reported-by: syzbot+4436c9630a45820fda76@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=c14607f0963d27d5a3d5f4c8639b500909e43540Suggested-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230410012352.3997823-1-william.xuanziyang@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
Martin Willi authored
The commits referenced below allows userspace to use the NLM_F_ECHO flag for RTM_NEW/DELLINK operations to receive unicast notifications for the affected link. Prior to these changes, applications may have relied on multicast notifications to learn the same information without specifying the NLM_F_ECHO flag. For such applications, the mentioned commits changed the behavior for requests not using NLM_F_ECHO. Multicast notifications are still received, but now use the portid of the requester and the sequence number of the request instead of zero values used previously. For the application, this message may be unexpected and likely handled as a response to the NLM_F_ACKed request, especially if it uses the same socket to handle requests and notifications. To fix existing applications relying on the old notification behavior, set the portid and sequence number in the notification only if the request included the NLM_F_ECHO flag. This restores the old behavior for applications not using it, but allows unicasted notifications for others. Fixes: f3a63cce ("rtnetlink: Honour NLM_F_ECHO flag in rtnl_delete_link") Fixes: d88e136c ("rtnetlink: Honour NLM_F_ECHO flag in rtnl_newlink_create") Signed-off-by: Martin Willi <martin@strongswan.org> Acked-by: Guillaume Nault <gnault@redhat.com> Acked-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20230411074319.24133-1-martin@strongswan.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 12 Apr, 2023 6 commits
-
-
Rob Herring authored
TI CPSW uses of_platform_* functions which are declared in of_platform.h. of_platform.h gets implicitly included by of_device.h, but that is going to be removed soon. Nothing else depends on of_device.h so it can be dropped. of_platform.h also implicitly includes platform_device.h, so add an explicit include for it, too. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Harshit Mogalapalli authored
Smatch reports: drivers/net/wwan/iosm/iosm_ipc_pcie.c:298 ipc_pcie_probe() warn: missing unwind goto? When dma_set_mask fails it directly returns without disabling pci device and freeing ipc_pcie. Fix this my calling a correct goto label As dma_set_mask returns either 0 or -EIO, we can use a goto label, as it finally returns -EIO. Add a set_mask_fail goto label which stands consistent with other goto labels in this function.. Fixes: 035e3bef ("net: wwan: iosm: fix driver not working with INTEL_IOMMU disabled") Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kuniyuki Iwashima authored
With Eric's ref tracker, syzbot finally found a repro for use-after-free in tcp_write_timer_handler() by kernel TCP sockets. [0] If SMC creates a kernel socket in __smc_create(), the kernel socket is supposed to be freed in smc_clcsock_release() by calling sock_release() when we close() the parent SMC socket. However, at the end of smc_clcsock_release(), the kernel socket's sk_state might not be TCP_CLOSE. This means that we have not called inet_csk_destroy_sock() in __tcp_close() and have not stopped the TCP timers. The kernel socket's TCP timers can be fired later, so we need to hold a refcnt for net as we do for MPTCP subflows in mptcp_subflow_create_socket(). [0]: leaked reference. sk_alloc (./include/net/net_namespace.h:335 net/core/sock.c:2108) inet_create (net/ipv4/af_inet.c:319 net/ipv4/af_inet.c:244) __sock_create (net/socket.c:1546) smc_create (net/smc/af_smc.c:3269 net/smc/af_smc.c:3284) __sock_create (net/socket.c:1546) __sys_socket (net/socket.c:1634 net/socket.c:1618 net/socket.c:1661) __x64_sys_socket (net/socket.c:1672) do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) ================================================================== BUG: KASAN: slab-use-after-free in tcp_write_timer_handler (net/ipv4/tcp_timer.c:378 net/ipv4/tcp_timer.c:624 net/ipv4/tcp_timer.c:594) Read of size 1 at addr ffff888052b65e0d by task syzrepro/18091 CPU: 0 PID: 18091 Comm: syzrepro Tainted: G W 6.3.0-rc4-01174-gb5d54eb5 #7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.amzn2022.0.1 04/01/2014 Call Trace: <IRQ> dump_stack_lvl (lib/dump_stack.c:107) print_report (mm/kasan/report.c:320 mm/kasan/report.c:430) kasan_report (mm/kasan/report.c:538) tcp_write_timer_handler (net/ipv4/tcp_timer.c:378 net/ipv4/tcp_timer.c:624 net/ipv4/tcp_timer.c:594) tcp_write_timer (./include/linux/spinlock.h:390 net/ipv4/tcp_timer.c:643) call_timer_fn (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:207 ./include/trace/events/timer.h:127 kernel/time/timer.c:1701) __run_timers.part.0 (kernel/time/timer.c:1752 kernel/time/timer.c:2022) run_timer_softirq (kernel/time/timer.c:2037) __do_softirq (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:207 ./include/trace/events/irq.h:142 kernel/softirq.c:572) __irq_exit_rcu (kernel/softirq.c:445 kernel/softirq.c:650) irq_exit_rcu (kernel/softirq.c:664) sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1107 (discriminator 14)) </IRQ> Fixes: ac713874 ("smc: establish new socket family") Reported-by: syzbot+7e1e1bdb852961150198@syzkaller.appspotmail.com Link: https://lore.kernel.org/netdev/000000000000a3f51805f8bcc43a@google.com/Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Denis Plotnikov authored
Static code analyzer complains to unchecked return value. The result of pci_reset_function() is unchecked. Despite, the issue is on the FLR supported code path and in that case reset can be done with pcie_flr(), the patch uses less invasive approach by adding the result check of pci_reset_function(). Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 7e2cf4fe ("qlcnic: change driver hardware interface mechanism") Signed-off-by: Denis Plotnikov <den-plotnikov@yandex-team.ru> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== iavf: fix racing in VLANs Ahmed Zaki says: This patchset mainly fixes a racing issue in the iavf where the number of VLANs in the vlan_filter_list might be more than the PF limit. To fix that, we get rid of the cvlans and svlans bitmaps and keep all the required info in the list. The second patch adds two new states that are needed so that we keep the VLAN info while the interface goes DOWN: -- DISABLE (notify PF, but keep the filter in the list) -- INACTIVE (dev is DOWN, filter is removed from PF) Finally, the current code keeps each state in a separate bit field, which is error prone. The first patch refactors that by replacing all bits with a single enum. The changes are minimal where each bit change is replaced with the new state value. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: iavf: remove active_cvlans and active_svlans bitmaps iavf: refactor VLAN filter states ==================== Link: https://lore.kernel.org/r/20230407210730.3046149-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothJakub Kicinski authored
Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - Fix not setting Dath Path for broadcast sink - Fix not cleaning up on LE Connection failure - SCO: Fix possible circular locking dependency - L2CAP: Fix use-after-free in l2cap_disconnect_{req,rsp} - Fix race condition in hidp_session_thread - btbcm: Fix logic error in forming the board name - btbcm: Fix use after free in btsdio_remove * tag 'for-net-2023-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: L2CAP: Fix use-after-free in l2cap_disconnect_{req,rsp} Bluetooth: Set ISO Data Path on broadcast sink Bluetooth: hci_conn: Fix possible UAF Bluetooth: SCO: Fix possible circular locking dependency sco_sock_getsockopt Bluetooth: SCO: Fix possible circular locking dependency on sco_connect_cfm bluetooth: btbcm: Fix logic error in forming the board name. Bluetooth: btsdio: fix use after free bug in btsdio_remove due to race condition Bluetooth: Fix race condition in hidp_session_thread Bluetooth: Fix printing errors if LE Connection times out Bluetooth: hci_conn: Fix not cleaning up on LE Connection failure ==================== Link: https://lore.kernel.org/r/20230410172718.4067798-1-luiz.dentz@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 11 Apr, 2023 1 commit
-
-
Radu Pirea (OSS) authored
Unregister PTP clock when the driver is removed. Purge the RX and TX skb queues. Fixes: 514def5d ("phy: nxp-c45-tja11xx: add timestamping support") CC: stable@vger.kernel.org # 5.15+ Signed-off-by: Radu Pirea (OSS) <radu-nicolae.pirea@oss.nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230406095904.75456-1-radu-nicolae.pirea@oss.nxp.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
- 10 Apr, 2023 10 commits
-
-
Luiz Augusto von Dentz authored
Similar to commit d0be8347 ("Bluetooth: L2CAP: Fix use-after-free caused by l2cap_chan_put"), just use l2cap_chan_hold_unless_zero to prevent referencing a channel that is about to be destroyed. Cc: stable@kernel.org Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Min Li <lm0963hack@gmail.com>
-
Claudia Draghicescu authored
This patch enables ISO data rx on broadcast sink. Fixes: eca0ae4a ("Bluetooth: Add initial implementation of BIS connections") Signed-off-by: Claudia Draghicescu <claudia.rosu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
Luiz Augusto von Dentz authored
This fixes the following trace: ================================================================== BUG: KASAN: slab-use-after-free in hci_conn_del+0xba/0x3a0 Write of size 8 at addr ffff88800208e9c8 by task iso-tester/31 CPU: 0 PID: 31 Comm: iso-tester Not tainted 6.3.0-rc2-g991aa4a69a47 #4716 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.1-2.fc36 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x1d/0x70 print_report+0xce/0x610 ? __virt_addr_valid+0xd4/0x150 ? hci_conn_del+0xba/0x3a0 kasan_report+0xdd/0x110 ? hci_conn_del+0xba/0x3a0 hci_conn_del+0xba/0x3a0 hci_conn_hash_flush+0xf2/0x120 hci_dev_close_sync+0x388/0x920 hci_unregister_dev+0x122/0x260 vhci_release+0x4f/0x90 __fput+0x102/0x430 task_work_run+0xf1/0x160 ? __pfx_task_work_run+0x10/0x10 ? mark_held_locks+0x24/0x90 exit_to_user_mode_prepare+0x170/0x180 syscall_exit_to_user_mode+0x19/0x50 do_syscall_64+0x4e/0x90 entry_SYSCALL_64_after_hwframe+0x70/0xda Fixes: 0f00cd32 ("Bluetooth: Free potentially unfreed SCO connection") Link: https://syzkaller.appspot.com/bug?extid=8bb72f86fc823817bc5d Cc: <stable@vger.kernel.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
Luiz Augusto von Dentz authored
This attempts to fix the following trace: ====================================================== WARNING: possible circular locking dependency detected 6.3.0-rc2-g68fcb3a7bf97 #4706 Not tainted ------------------------------------------------------ sco-tester/31 is trying to acquire lock: ffff8880025b8070 (&hdev->lock){+.+.}-{3:3}, at: sco_sock_getsockopt+0x1fc/0xa90 but task is already holding lock: ffff888001eeb130 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}, at: sco_sock_getsockopt+0x104/0xa90 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}: lock_sock_nested+0x32/0x80 sco_connect_cfm+0x118/0x4a0 hci_sync_conn_complete_evt+0x1e6/0x3d0 hci_event_packet+0x55c/0x7c0 hci_rx_work+0x34c/0xa00 process_one_work+0x575/0x910 worker_thread+0x89/0x6f0 kthread+0x14e/0x180 ret_from_fork+0x2b/0x50 -> #1 (hci_cb_list_lock){+.+.}-{3:3}: __mutex_lock+0x13b/0xcc0 hci_sync_conn_complete_evt+0x1ad/0x3d0 hci_event_packet+0x55c/0x7c0 hci_rx_work+0x34c/0xa00 process_one_work+0x575/0x910 worker_thread+0x89/0x6f0 kthread+0x14e/0x180 ret_from_fork+0x2b/0x50 -> #0 (&hdev->lock){+.+.}-{3:3}: __lock_acquire+0x18cc/0x3740 lock_acquire+0x151/0x3a0 __mutex_lock+0x13b/0xcc0 sco_sock_getsockopt+0x1fc/0xa90 __sys_getsockopt+0xe9/0x190 __x64_sys_getsockopt+0x5b/0x70 do_syscall_64+0x42/0x90 entry_SYSCALL_64_after_hwframe+0x70/0xda other info that might help us debug this: Chain exists of: &hdev->lock --> hci_cb_list_lock --> sk_lock-AF_BLUETOOTH-BTPROTO_SCO Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(sk_lock-AF_BLUETOOTH-BTPROTO_SCO); lock(hci_cb_list_lock); lock(sk_lock-AF_BLUETOOTH-BTPROTO_SCO); lock(&hdev->lock); *** DEADLOCK *** 1 lock held by sco-tester/31: #0: ffff888001eeb130 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}, at: sco_sock_getsockopt+0x104/0xa90 Fixes: 248733e8 ("Bluetooth: Allow querying of supported offload codecs over SCO socket") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
Luiz Augusto von Dentz authored
This attempts to fix the following trace: ====================================================== WARNING: possible circular locking dependency detected 6.3.0-rc2-g0b93eeba4454 #4703 Not tainted ------------------------------------------------------ kworker/u3:0/46 is trying to acquire lock: ffff888001fd9130 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}, at: sco_connect_cfm+0x118/0x4a0 but task is already holding lock: ffffffff831e3340 (hci_cb_list_lock){+.+.}-{3:3}, at: hci_sync_conn_complete_evt+0x1ad/0x3d0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (hci_cb_list_lock){+.+.}-{3:3}: __mutex_lock+0x13b/0xcc0 hci_sync_conn_complete_evt+0x1ad/0x3d0 hci_event_packet+0x55c/0x7c0 hci_rx_work+0x34c/0xa00 process_one_work+0x575/0x910 worker_thread+0x89/0x6f0 kthread+0x14e/0x180 ret_from_fork+0x2b/0x50 -> #1 (&hdev->lock){+.+.}-{3:3}: __mutex_lock+0x13b/0xcc0 sco_sock_connect+0xfc/0x630 __sys_connect+0x197/0x1b0 __x64_sys_connect+0x37/0x50 do_syscall_64+0x42/0x90 entry_SYSCALL_64_after_hwframe+0x70/0xda -> #0 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}: __lock_acquire+0x18cc/0x3740 lock_acquire+0x151/0x3a0 lock_sock_nested+0x32/0x80 sco_connect_cfm+0x118/0x4a0 hci_sync_conn_complete_evt+0x1e6/0x3d0 hci_event_packet+0x55c/0x7c0 hci_rx_work+0x34c/0xa00 process_one_work+0x575/0x910 worker_thread+0x89/0x6f0 kthread+0x14e/0x180 ret_from_fork+0x2b/0x50 other info that might help us debug this: Chain exists of: sk_lock-AF_BLUETOOTH-BTPROTO_SCO --> &hdev->lock --> hci_cb_list_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(hci_cb_list_lock); lock(&hdev->lock); lock(hci_cb_list_lock); lock(sk_lock-AF_BLUETOOTH-BTPROTO_SCO); *** DEADLOCK *** 4 locks held by kworker/u3:0/46: #0: ffff8880028d1130 ((wq_completion)hci0#2){+.+.}-{0:0}, at: process_one_work+0x4c0/0x910 #1: ffff8880013dfde0 ((work_completion)(&hdev->rx_work)){+.+.}-{0:0}, at: process_one_work+0x4c0/0x910 #2: ffff8880025d8070 (&hdev->lock){+.+.}-{3:3}, at: hci_sync_conn_complete_evt+0xa6/0x3d0 #3: ffffffffb79e3340 (hci_cb_list_lock){+.+.}-{3:3}, at: hci_sync_conn_complete_evt+0x1ad/0x3d0 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
Sasha Finkelstein authored
This patch fixes an incorrect loop exit condition in code that replaces '/' symbols in the board name. There might also be a memory corruption issue here, but it is unlikely to be a real problem. Cc: <stable@vger.kernel.org> Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
Zheng Wang authored
In btsdio_probe, the data->work is bound with btsdio_work. It will be started in btsdio_send_frame. If the btsdio_remove runs with a unfinished work, there may be a race condition that hdev is freed but used in btsdio_work. Fix it by canceling the work before do cleanup in btsdio_remove. Signed-off-by: Zheng Wang <zyytlz.wz@163.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
Min Li authored
There is a potential race condition in hidp_session_thread that may lead to use-after-free. For instance, the timer is active while hidp_del_timer is called in hidp_session_thread(). After hidp_session_put, then 'session' will be freed, causing kernel panic when hidp_idle_timeout is running. The solution is to use del_timer_sync instead of del_timer. Here is the call trace: ? hidp_session_probe+0x780/0x780 call_timer_fn+0x2d/0x1e0 __run_timers.part.0+0x569/0x940 hidp_session_probe+0x780/0x780 call_timer_fn+0x1e0/0x1e0 ktime_get+0x5c/0xf0 lapic_next_deadline+0x2c/0x40 clockevents_program_event+0x205/0x320 run_timer_softirq+0xa9/0x1b0 __do_softirq+0x1b9/0x641 __irq_exit_rcu+0xdc/0x190 irq_exit_rcu+0xe/0x20 sysvec_apic_timer_interrupt+0xa1/0xc0 Cc: stable@vger.kernel.org Signed-off-by: Min Li <lm0963hack@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
Luiz Augusto von Dentz authored
This fixes errors like bellow when LE Connection times out since that is actually not a controller error: Bluetooth: hci0: Opcode 0x200d failed: -110 Bluetooth: hci0: request failed to create LE connection: err -110 Instead the code shall properly detect if -ETIMEDOUT is returned and send HCI_OP_LE_CREATE_CONN_CANCEL to give up on the connection. Link: https://github.com/bluez/bluez/issues/340 Fixes: 8e8b92ee ("Bluetooth: hci_sync: Add hci_le_create_conn_sync") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
Luiz Augusto von Dentz authored
hci_connect_le_scan_cleanup shall always be invoked to cleanup the states and re-enable passive scanning if necessary, otherwise it may cause the pending action to stay active causing multiple attempts to connect. Fixes: 9b3628d7 ("Bluetooth: hci_sync: Cleanup hci_conn if it cannot be aborted") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
- 09 Apr, 2023 3 commits
-
-
David S. Miller authored
Ivan Bornyakov says: ==================== net: fix EEPROM read of absent SFP module The patchset is to improve EEPROM read requests when SFP module is absent. ChangeLog: v1: https://lore.kernel.org/netdev/20230405153900.747-1-i.bornyakov@metrotek.ru/ v2: * reword commit message of "net: sfp: initialize sfp->i2c_block_size at sfp allocation" * add second patch to eliminate excessive I2C transfers in sfp_module_eeprom() and sfp_module_eeprom_by_page() ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ivan Bornyakov authored
If SFP module is not present, it is sensible to fail sfp_module_eeprom() and sfp_module_eeprom_by_page() early to avoid excessive I2C transfers which are garanteed to fail. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ivan Bornyakov authored
sfp->i2c_block_size is initialized at SFP module insertion in sfp_sm_mod_probe(). Because of that, if SFP module was never inserted since boot, sfp_read() call will lead to zero-length I2C read attempt, and not all I2C controllers are happy with zero-length reads. One way to issue sfp_read() on empty SFP cage is to execute ethtool -m. If SFP module was never plugged since boot, there will be a zero-length I2C read attempt. # ethtool -m xge0 i2c i2c-3: adapter quirk: no zero length (addr 0x0050, size 0, read) Cannot get Module EEPROM data: Operation not supported If SFP module was plugged then removed at least once, sfp->i2c_block_size will be initialized and ethtool -m will fail with different exit code and without I2C error # ethtool -m xge0 Cannot get Module EEPROM data: Remote I/O error Fix this by initializing sfp->i2_block_size at struct sfp allocation stage so no wild sfp_read() could issue zero-length I2C read. Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru> Fixes: 0d035bed ("net: sfp: VSOL V2801F / CarlitoxxPro CPGOS03-0490 v2.0 workaround") Cc: stable@vger.kernel.org Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 08 Apr, 2023 4 commits
-
-
Douglas Anderson authored
When memory is a little tight on my system, it's pretty easy to see warnings that look like this. ksoftirqd/0: page allocation failure: order:3, mode:0x40a20(GFP_ATOMIC|__GFP_COMP), nodemask=(null),cpuset=/,mems_allowed=0 ... Call trace: dump_backtrace+0x0/0x1e8 show_stack+0x20/0x2c dump_stack_lvl+0x60/0x78 dump_stack+0x18/0x38 warn_alloc+0x104/0x174 __alloc_pages+0x588/0x67c alloc_rx_agg+0xa0/0x190 [r8152 ...] r8152_poll+0x270/0x760 [r8152 ...] __napi_poll+0x44/0x1ec net_rx_action+0x100/0x300 __do_softirq+0xec/0x38c run_ksoftirqd+0x38/0xec smpboot_thread_fn+0xb8/0x248 kthread+0x134/0x154 ret_from_fork+0x10/0x20 On a fragmented system it's normal that order 3 allocations will sometimes fail, especially atomic ones. The driver handles these failures fine and the WARN just creates spam in the logs for this case. The __GFP_NOWARN flag is exactly for this situation, so add it to the allocation. NOTE: my testing is on a 5.15 system, but there should be no reason that this would be fundamentally different on a mainline kernel. Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Hayes Wang <hayeswang@realtek.com> Link: https://lore.kernel.org/r/20230406171411.1.I84dbef45786af440fd269b71e9436a96a8e7a152@changeidSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Radu Pirea (OSS) authored
Any multiplication between GENMASK(31, 0) and a number bigger than 1 will be truncated because of the overflow, if the size of unsigned long is 32 bits. Replaced GENMASK with GENMASK_ULL to make sure that multiplication will be between 64 bits values. Cc: <stable@vger.kernel.org> # 5.15+ Fixes: 514def5d ("phy: nxp-c45-tja11xx: add timestamping support") Signed-off-by: Radu Pirea (OSS) <radu-nicolae.pirea@oss.nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230406095953.75622-1-radu-nicolae.pirea@oss.nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Felix Huettner authored
assume the following setup on a single machine: 1. An openvswitch instance with one bridge and default flows 2. two network namespaces "server" and "client" 3. two ovs interfaces "server" and "client" on the bridge 4. for each ovs interface a veth pair with a matching name and 32 rx and tx queues 5. move the ends of the veth pairs to the respective network namespaces 6. assign ip addresses to each of the veth ends in the namespaces (needs to be the same subnet) 7. start some http server on the server network namespace 8. test if a client in the client namespace can reach the http server when following the actions below the host has a chance of getting a cpu stuck in a infinite loop: 1. send a large amount of parallel requests to the http server (around 3000 curls should work) 2. in parallel delete the network namespace (do not delete interfaces or stop the server, just kill the namespace) there is a low chance that this will cause the below kernel cpu stuck message. If this does not happen just retry. Below there is also the output of bpftrace for the functions mentioned in the output. The series of events happening here is: 1. the network namespace is deleted calling `unregister_netdevice_many_notify` somewhere in the process 2. this sets first `NETREG_UNREGISTERING` on both ends of the veth and then runs `synchronize_net` 3. it then calls `call_netdevice_notifiers` with `NETDEV_UNREGISTER` 4. this is then handled by `dp_device_event` which calls `ovs_netdev_detach_dev` (if a vport is found, which is the case for the veth interface attached to ovs) 5. this removes the rx_handlers of the device but does not prevent packages to be sent to the device 6. `dp_device_event` then queues the vport deletion to work in background as a ovs_lock is needed that we do not hold in the unregistration path 7. `unregister_netdevice_many_notify` continues to call `netdev_unregister_kobject` which sets `real_num_tx_queues` to 0 8. port deletion continues (but details are not relevant for this issue) 9. at some future point the background task deletes the vport If after 7. but before 9. a packet is send to the ovs vport (which is not deleted at this point in time) which forwards it to the `dev_queue_xmit` flow even though the device is unregistering. In `skb_tx_hash` (which is called in the `dev_queue_xmit`) path there is a while loop (if the packet has a rx_queue recorded) that is infinite if `dev->real_num_tx_queues` is zero. To prevent this from happening we update `do_output` to handle devices without carrier the same as if the device is not found (which would be the code path after 9. is done). Additionally we now produce a warning in `skb_tx_hash` if we will hit the infinite loop. bpftrace (first word is function name): __dev_queue_xmit server: real_num_tx_queues: 1, cpu: 2, pid: 28024, tid: 28024, skb_addr: 0xffff9edb6f207000, reg_state: 1 netdev_core_pick_tx server: addr: 0xffff9f0a46d4a000 real_num_tx_queues: 1, cpu: 2, pid: 28024, tid: 28024, skb_addr: 0xffff9edb6f207000, reg_state: 1 dp_device_event server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, event 2, reg_state: 1 synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024 synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024 synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024 synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024 dp_device_event server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, event 6, reg_state: 2 ovs_netdev_detach_dev server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, reg_state: 2 netdev_rx_handler_unregister server: real_num_tx_queues: 1, cpu: 9, pid: 21024, tid: 21024, reg_state: 2 synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024 netdev_rx_handler_unregister ret server: real_num_tx_queues: 1, cpu: 9, pid: 21024, tid: 21024, reg_state: 2 dp_device_event server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, event 27, reg_state: 2 dp_device_event server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, event 22, reg_state: 2 dp_device_event server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, event 18, reg_state: 2 netdev_unregister_kobject: real_num_tx_queues: 1, cpu: 9, pid: 21024, tid: 21024 synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024 ovs_vport_send server: real_num_tx_queues: 0, cpu: 2, pid: 28024, tid: 28024, skb_addr: 0xffff9edb6f207000, reg_state: 2 __dev_queue_xmit server: real_num_tx_queues: 0, cpu: 2, pid: 28024, tid: 28024, skb_addr: 0xffff9edb6f207000, reg_state: 2 netdev_core_pick_tx server: addr: 0xffff9f0a46d4a000 real_num_tx_queues: 0, cpu: 2, pid: 28024, tid: 28024, skb_addr: 0xffff9edb6f207000, reg_state: 2 broken device server: real_num_tx_queues: 0, cpu: 2, pid: 28024, tid: 28024 ovs_dp_detach_port server: real_num_tx_queues: 0 cpu 9, pid: 9124, tid: 9124, reg_state: 2 synchronize_rcu_expedited: cpu 9, pid: 33604, tid: 33604 stuck message: watchdog: BUG: soft lockup - CPU#5 stuck for 26s! [curl:1929279] Modules linked in: veth pktgen bridge stp llc ip_set_hash_net nft_counter xt_set nft_compat nf_tables ip_set_hash_ip ip_set nfnetlink_cttimeout nfnetlink openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 tls binfmt_misc nls_iso8859_1 input_leds joydev serio_raw dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua sch_fq_codel drm efi_pstore virtio_rng ip_tables x_tables autofs4 btrfs blake2b_generic zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear hid_generic usbhid hid crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel virtio_net ahci net_failover crypto_simd cryptd psmouse libahci virtio_blk failover CPU: 5 PID: 1929279 Comm: curl Not tainted 5.15.0-67-generic #74-Ubuntu Hardware name: OpenStack Foundation OpenStack Nova, BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:netdev_pick_tx+0xf1/0x320 Code: 00 00 8d 48 ff 0f b7 c1 66 39 ca 0f 86 e9 01 00 00 45 0f b7 ff 41 39 c7 0f 87 5b 01 00 00 44 29 f8 41 39 c7 0f 87 4f 01 00 00 <eb> f2 0f 1f 44 00 00 49 8b 94 24 28 04 00 00 48 85 d2 0f 84 53 01 RSP: 0018:ffffb78b40298820 EFLAGS: 00000246 RAX: 0000000000000000 RBX: ffff9c8773adc2e0 RCX: 000000000000083f RDX: 0000000000000000 RSI: ffff9c8773adc2e0 RDI: ffff9c870a25e000 RBP: ffffb78b40298858 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff9c870a25e000 R13: ffff9c870a25e000 R14: ffff9c87fe043480 R15: 0000000000000000 FS: 00007f7b80008f00(0000) GS:ffff9c8e5f740000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7b80f6a0b0 CR3: 0000000329d66000 CR4: 0000000000350ee0 Call Trace: <IRQ> netdev_core_pick_tx+0xa4/0xb0 __dev_queue_xmit+0xf8/0x510 ? __bpf_prog_exit+0x1e/0x30 dev_queue_xmit+0x10/0x20 ovs_vport_send+0xad/0x170 [openvswitch] do_output+0x59/0x180 [openvswitch] do_execute_actions+0xa80/0xaa0 [openvswitch] ? kfree+0x1/0x250 ? kfree+0x1/0x250 ? kprobe_perf_func+0x4f/0x2b0 ? flow_lookup.constprop.0+0x5c/0x110 [openvswitch] ovs_execute_actions+0x4c/0x120 [openvswitch] ovs_dp_process_packet+0xa1/0x200 [openvswitch] ? ovs_ct_update_key.isra.0+0xa8/0x120 [openvswitch] ? ovs_ct_fill_key+0x1d/0x30 [openvswitch] ? ovs_flow_key_extract+0x2db/0x350 [openvswitch] ovs_vport_receive+0x77/0xd0 [openvswitch] ? __htab_map_lookup_elem+0x4e/0x60 ? bpf_prog_680e8aff8547aec1_kfree+0x3b/0x714 ? trace_call_bpf+0xc8/0x150 ? kfree+0x1/0x250 ? kfree+0x1/0x250 ? kprobe_perf_func+0x4f/0x2b0 ? kprobe_perf_func+0x4f/0x2b0 ? __mod_memcg_lruvec_state+0x63/0xe0 netdev_port_receive+0xc4/0x180 [openvswitch] ? netdev_port_receive+0x180/0x180 [openvswitch] netdev_frame_hook+0x1f/0x40 [openvswitch] __netif_receive_skb_core.constprop.0+0x23d/0xf00 __netif_receive_skb_one_core+0x3f/0xa0 __netif_receive_skb+0x15/0x60 process_backlog+0x9e/0x170 __napi_poll+0x33/0x180 net_rx_action+0x126/0x280 ? ttwu_do_activate+0x72/0xf0 __do_softirq+0xd9/0x2e7 ? rcu_report_exp_cpu_mult+0x1b0/0x1b0 do_softirq+0x7d/0xb0 </IRQ> <TASK> __local_bh_enable_ip+0x54/0x60 ip_finish_output2+0x191/0x460 __ip_finish_output+0xb7/0x180 ip_finish_output+0x2e/0xc0 ip_output+0x78/0x100 ? __ip_finish_output+0x180/0x180 ip_local_out+0x5e/0x70 __ip_queue_xmit+0x184/0x440 ? tcp_syn_options+0x1f9/0x300 ip_queue_xmit+0x15/0x20 __tcp_transmit_skb+0x910/0x9c0 ? __mod_memcg_state+0x44/0xa0 tcp_connect+0x437/0x4e0 ? ktime_get_with_offset+0x60/0xf0 tcp_v4_connect+0x436/0x530 __inet_stream_connect+0xd4/0x3a0 ? kprobe_perf_func+0x4f/0x2b0 ? aa_sk_perm+0x43/0x1c0 inet_stream_connect+0x3b/0x60 __sys_connect_file+0x63/0x70 __sys_connect+0xa6/0xd0 ? setfl+0x108/0x170 ? do_fcntl+0xe8/0x5a0 __x64_sys_connect+0x18/0x20 do_syscall_64+0x5c/0xc0 ? __x64_sys_fcntl+0xa9/0xd0 ? exit_to_user_mode_prepare+0x37/0xb0 ? syscall_exit_to_user_mode+0x27/0x50 ? do_syscall_64+0x69/0xc0 ? __sys_setsockopt+0xea/0x1e0 ? exit_to_user_mode_prepare+0x37/0xb0 ? syscall_exit_to_user_mode+0x27/0x50 ? __x64_sys_setsockopt+0x1f/0x30 ? do_syscall_64+0x69/0xc0 ? irqentry_exit+0x1d/0x30 ? exc_page_fault+0x89/0x170 entry_SYSCALL_64_after_hwframe+0x61/0xcb RIP: 0033:0x7f7b8101c6a7 Code: 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2a 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 18 89 54 24 0c 48 89 34 24 89 RSP: 002b:00007ffffd6b2198 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f7b8101c6a7 RDX: 0000000000000010 RSI: 00007ffffd6b2360 RDI: 0000000000000005 RBP: 0000561f1370d560 R08: 00002795ad21d1ac R09: 0030312e302e302e R10: 00007ffffd73f080 R11: 0000000000000246 R12: 0000561f1370c410 R13: 0000000000000000 R14: 0000000000000005 R15: 0000000000000000 </TASK> Fixes: 7f8a436e ("openvswitch: Add conntrack action") Co-developed-by: Luca Czesla <luca.czesla@mail.schwarz> Signed-off-by: Luca Czesla <luca.czesla@mail.schwarz> Signed-off-by: Felix Huettner <felix.huettner@mail.schwarz> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/ZC0pBXBAgh7c76CA@kernel-bug-kernel-bugSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski authored
Daniel Borkmann says: ==================== pull-request: bpf 2023-04-08 We've added 4 non-merge commits during the last 11 day(s) which contain a total of 5 files changed, 39 insertions(+), 6 deletions(-). The main changes are: 1) Fix BPF TCP socket iterator to use correct helper for dropping socket's refcount, that is, sock_gen_put instead of sock_put, from Martin KaFai Lau. 2) Fix a BTI exception splat in BPF trampoline-generated code on arm64, from Xu Kuohai. 3) Fix a LongArch JIT error from missing BPF_NOSPEC no-op, from George Guo. 4) Fix dynamic XDP feature detection of veth in xdp_redirect selftest, from Lorenzo Bianconi. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: selftests/bpf: fix xdp_redirect xdp-features selftest for veth driver bpf, arm64: Fixed a BTI error on returning to patched function LoongArch, bpf: Fix jit to skip speculation barrier opcode bpf: tcp: Use sock_gen_put instead of sock_put in bpf_iter_tcp ==================== Link: https://lore.kernel.org/r/20230407224642.30906-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 07 Apr, 2023 8 commits
-
-
Ahmed Zaki authored
The VLAN filters info is currently being held in a list and 2 bitmaps (active_cvlans and active_svlans). We are experiencing some racing where data is not in sync in the list and bitmaps. For example, the VLAN is initially added to the list but only when the PF replies, it is added to the bitmap. If a user adds many V2 VLANS before the PF responds: while [ $((i++)) ] ip l add l eth0 name eth0.$i type vlan id $i we might end up with more VLAN list entries than the designated limit. Also, The "ip link show" will show more links added than the PF limit. On the other and, the bitmaps are only used to check the number of VLAN filters and to re-enable the filters when the interface goes from DOWN to UP. This patch gets rid of the bitmaps and uses the list only. To do that, the states of the VLAN filter are modified: 1 - IAVF_VLAN_REMOVE: the entry needs to be totally removed after informing the PF. This is the "ip link del eth0.$i" path. 2 - IAVF_VLAN_DISABLE: (new) the netdev went down. The filter needs to be removed from the PF and then marked INACTIVE. 3 - IAVF_VLAN_INACTIVE: (new) no PF filter exists, but the user did not delete the VLAN. Fixes: 48ccc43e ("iavf: Add support VIRTCHNL_VF_OFFLOAD_VLAN_V2 during netdev config") Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Ahmed Zaki authored
The VLAN filter states are currently being saved as individual bits. This is error prone as multiple bits might be mistakenly set. Fix by replacing the bits with a single state enum. Also, add an "ACTIVE" state for filters that are accepted by the PF. Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
David S. Miller authored
Hangbin Liu says: ==================== bonding: fix ns validation on backup slaves The first patch fixed a ns validation issue on backup slaves. The second patch re-format the bond option test and add a test lib file. The third patch add the arp validate regression test for the kernel patch. Here is the new bonding option test without the kernel fix: ]# ./bond_options.sh TEST: prio (active-backup miimon primary_reselect 0) [ OK ] TEST: prio (active-backup miimon primary_reselect 1) [ OK ] TEST: prio (active-backup miimon primary_reselect 2) [ OK ] TEST: prio (active-backup arp_ip_target primary_reselect 0) [ OK ] TEST: prio (active-backup arp_ip_target primary_reselect 1) [ OK ] TEST: prio (active-backup arp_ip_target primary_reselect 2) [ OK ] TEST: prio (active-backup ns_ip6_target primary_reselect 0) [ OK ] TEST: prio (active-backup ns_ip6_target primary_reselect 1) [ OK ] TEST: prio (active-backup ns_ip6_target primary_reselect 2) [ OK ] TEST: prio (balance-tlb miimon primary_reselect 0) [ OK ] TEST: prio (balance-tlb miimon primary_reselect 1) [ OK ] TEST: prio (balance-tlb miimon primary_reselect 2) [ OK ] TEST: prio (balance-tlb arp_ip_target primary_reselect 0) [ OK ] TEST: prio (balance-tlb arp_ip_target primary_reselect 1) [ OK ] TEST: prio (balance-tlb arp_ip_target primary_reselect 2) [ OK ] TEST: prio (balance-tlb ns_ip6_target primary_reselect 0) [ OK ] TEST: prio (balance-tlb ns_ip6_target primary_reselect 1) [ OK ] TEST: prio (balance-tlb ns_ip6_target primary_reselect 2) [ OK ] TEST: prio (balance-alb miimon primary_reselect 0) [ OK ] TEST: prio (balance-alb miimon primary_reselect 1) [ OK ] TEST: prio (balance-alb miimon primary_reselect 2) [ OK ] TEST: prio (balance-alb arp_ip_target primary_reselect 0) [ OK ] TEST: prio (balance-alb arp_ip_target primary_reselect 1) [ OK ] TEST: prio (balance-alb arp_ip_target primary_reselect 2) [ OK ] TEST: prio (balance-alb ns_ip6_target primary_reselect 0) [ OK ] TEST: prio (balance-alb ns_ip6_target primary_reselect 1) [ OK ] TEST: prio (balance-alb ns_ip6_target primary_reselect 2) [ OK ] TEST: arp_validate (active-backup arp_ip_target arp_validate 0) [ OK ] TEST: arp_validate (active-backup arp_ip_target arp_validate 1) [ OK ] TEST: arp_validate (active-backup arp_ip_target arp_validate 2) [ OK ] TEST: arp_validate (active-backup arp_ip_target arp_validate 3) [ OK ] TEST: arp_validate (active-backup arp_ip_target arp_validate 4) [ OK ] TEST: arp_validate (active-backup arp_ip_target arp_validate 5) [ OK ] TEST: arp_validate (active-backup arp_ip_target arp_validate 6) [ OK ] TEST: arp_validate (active-backup ns_ip6_target arp_validate 0) [ OK ] TEST: arp_validate (active-backup ns_ip6_target arp_validate 1) [ OK ] TEST: arp_validate (interface eth1 mii_status DOWN) [FAIL] TEST: arp_validate (interface eth2 mii_status DOWN) [FAIL] TEST: arp_validate (active-backup ns_ip6_target arp_validate 2) [FAIL] TEST: arp_validate (interface eth1 mii_status DOWN) [FAIL] TEST: arp_validate (interface eth2 mii_status DOWN) [FAIL] TEST: arp_validate (active-backup ns_ip6_target arp_validate 3) [FAIL] TEST: arp_validate (active-backup ns_ip6_target arp_validate 4) [ OK ] TEST: arp_validate (active-backup ns_ip6_target arp_validate 5) [ OK ] TEST: arp_validate (interface eth1 mii_status DOWN) [FAIL] TEST: arp_validate (interface eth2 mii_status DOWN) [FAIL] TEST: arp_validate (active-backup ns_ip6_target arp_validate 6) [FAIL] Here is the test result after the kernel fix: TEST: arp_validate (active-backup arp_ip_target arp_validate 0) [ OK ] TEST: arp_validate (active-backup arp_ip_target arp_validate 1) [ OK ] TEST: arp_validate (active-backup arp_ip_target arp_validate 2) [ OK ] TEST: arp_validate (active-backup arp_ip_target arp_validate 3) [ OK ] TEST: arp_validate (active-backup arp_ip_target arp_validate 4) [ OK ] TEST: arp_validate (active-backup arp_ip_target arp_validate 5) [ OK ] TEST: arp_validate (active-backup arp_ip_target arp_validate 6) [ OK ] TEST: arp_validate (active-backup ns_ip6_target arp_validate 0) [ OK ] TEST: arp_validate (active-backup ns_ip6_target arp_validate 1) [ OK ] TEST: arp_validate (active-backup ns_ip6_target arp_validate 2) [ OK ] TEST: arp_validate (active-backup ns_ip6_target arp_validate 3) [ OK ] TEST: arp_validate (active-backup ns_ip6_target arp_validate 4) [ OK ] TEST: arp_validate (active-backup ns_ip6_target arp_validate 5) [ OK ] TEST: arp_validate (active-backup ns_ip6_target arp_validate 6) [ OK ] ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hangbin Liu authored
This patch add bonding arp validate tests with mode active backup, monitor arp_ip_target and ns_ip6_target. It also checks mii_status to make sure all slaves are UP. Acked-by: Jonathan Toppins <jtoppins@redhat.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hangbin Liu authored
To improve the testing process for bond options, A new bond topology lib is added to our testing setup. The current option_prio.sh file will be renamed to bond_options.sh so that all bonding options can be tested here. Specifically, for priority testing, we will run all tests using modes 1, 5, and 6. These changes will help us streamline the testing process and ensure that our bond options are rigorously evaluated. Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Jonathan Toppins <jtoppins@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hangbin Liu authored
When arp_validate is set to 2, 3, or 6, validation is performed for backup slaves as well. As stated in the bond documentation, validation involves checking the broadcast ARP request sent out via the active slave. This helps determine which slaves are more likely to function in the event of an active slave failure. However, when the target is an IPv6 address, the NS message sent from the active interface is not checked on backup slaves. Additionally, based on the bond_arp_rcv() rule b, we must reverse the saddr and daddr when checking the NS message. Note that when checking the NS message, the destination address is a multicast address. Therefore, we must convert the target address to solicited multicast in the bond_get_targets_ip6() function. Prior to the fix, the backup slaves had a mii status of "down", but after the fix, all of the slaves' mii status was updated to "UP". Fixes: 4e24be01 ("bonding: add new parameter ns_targets") Reviewed-by: Jonathan Toppins <jtoppins@redhat.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
YueHaibing authored
UBSAN: shift-out-of-bounds in net/ipv4/tcp_input.c:555:23 shift exponent 255 is too large for 32-bit type 'int' CPU: 1 PID: 7907 Comm: ssh Not tainted 6.3.0-rc4-00161-g62bad54b-dirty #206 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x136/0x150 __ubsan_handle_shift_out_of_bounds+0x21f/0x5a0 tcp_init_transfer.cold+0x3a/0xb9 tcp_finish_connect+0x1d0/0x620 tcp_rcv_state_process+0xd78/0x4d60 tcp_v4_do_rcv+0x33d/0x9d0 __release_sock+0x133/0x3b0 release_sock+0x58/0x1b0 'maxwin' is int, shifting int for 32 or more bits is undefined behaviour. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Harshit Mogalapalli authored
Smatch reports: drivers/net/ethernet/sun/niu.c:4525 niu_alloc_channels() warn: missing unwind goto? If niu_rbr_fill() fails, then we are directly returning 'err' without freeing the channels. Fix this by changing direct return to a goto 'out_err'. Fixes: a3138df9 ("[NIU]: Add Sun Neptune ethernet driver.") Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 06 Apr, 2023 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from wireless and can. Current release - regressions: - wifi: mac80211: - fix potential null pointer dereference - fix receiving mesh packets in forwarding=0 networks - fix mesh forwarding Current release - new code bugs: - virtio/vsock: fix leaks due to missing skb owner Previous releases - regressions: - raw: fix NULL deref in raw_get_next(). - sctp: check send stream number after wait_for_sndbuf - qrtr: - fix a refcount bug in qrtr_recvmsg() - do not do DEL_SERVER broadcast after DEL_CLIENT - wifi: brcmfmac: fix SDIO suspend/resume regression - wifi: mt76: fix use-after-free in fw features query. - can: fix race between isotp_sendsmg() and isotp_release() - eth: mtk_eth_soc: fix remaining throughput regression - eth: ice: reset FDIR counter in FDIR init stage Previous releases - always broken: - core: don't let netpoll invoke NAPI if in xmit context - icmp: guard against too small mtu - ipv6: fix an uninit variable access bug in __ip6_make_skb() - wifi: mac80211: fix the size calculation of ieee80211_ie_len_eht_cap() - can: fix poll() to not report false EPOLLOUT events - eth: gve: secure enough bytes in the first TX desc for all TCP pkts" * tag 'net-6.3-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits) net: stmmac: check fwnode for phy device before scanning for phy net: stmmac: Add queue reset into stmmac_xdp_open() function selftests: net: rps_default_mask.sh: delete veth link specifically net: fec: make use of MDIO C45 quirk can: isotp: fix race between isotp_sendsmg() and isotp_release() can: isotp: isotp_ops: fix poll() to not report false EPOLLOUT events can: isotp: isotp_recvmsg(): use sock_recv_cmsgs() to get SOCK_RXQ_OVFL infos can: j1939: j1939_tp_tx_dat_new(): fix out-of-bounds memory access gve: Secure enough bytes in the first TX desc for all TCP pkts netlink: annotate lockless accesses to nlk->max_recvmsg_len ethtool: reset #lanes when lanes is omitted ping: Fix potentail NULL deref for /proc/net/icmp. raw: Fix NULL deref in raw_get_next(). ice: Reset FDIR counter in FDIR init stage ice: fix wrong fallback logic for FDIR net: stmmac: fix up RX flow hash indirection table when setting channels net: ethernet: ti: am65-cpsw: Fix mdio cleanup in probe wifi: mt76: ignore key disable commands wifi: ath11k: reduce the MHI timeout to 20s ipv6: Fix an uninit variable access bug in __ip6_make_skb() ...
-