Merge tag 'tegra-for-4.20-firmware-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers

firmware: tegra: Changes for v4.20-rc1

This contains a fix for suspend/resume support for the BPMP found on
Tegra186 and Tegra194.

* tag 'tegra-for-4.20-firmware-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  firmware: tegra: bpmp: Implement suspend/resume support
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

When returning from a system sleep state, the BPMP driver needs to
reinitialize the IVC channels used to communicate with the BPMP to
restore proper functionality.
Signed-off-by: Thierry Reding <treding@nvidia.com>

arm64: zynqmp: SoC CLK changes for v4.20

This patchset adds CCF compliant clock driver for ZynqMP.
Clock driver queries supported clock information from firmware
and regiters pll and output clocks with CCF.

* tag 'zynqmp-soc-clk-for-v4.20' of https://github.com/Xilinx/linux-xlnx:
  drivers: clk: Add ZynqMP clock driver
  dt-bindings: clock: Add bindings for ZynqMP clock driver
  firmware: xilinx: Add zynqmp IOCTL API for device control
  Documentation: xilinx: Add documentation for eemi APIs
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Reset controller changes for v4.20

This adds a new driver for the PDC Global (Power Domain Controller)
reset controller found on Qualcomm SDM845 SoCs, fixes a potential
use-after-free issue in reset_controller_dev.of_xlate() callbacks
from __of_reset_control_get(), and trivially fixes a documentation
grammar issue.

* tag 'reset-for-4.20' of git://git.pengutronix.de/git/pza/linux:
  reset: Fix potential use-after-free in __of_reset_control_get()
  reset: qcom: PDC Global (Power Domain Controller) reset controller
  dt-bindings: reset: Add PDC Global binding for SDM845 SoCs
  reset: Grammar s/more then once/more than once/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'imx-drivers-4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/drivers

i.MX drivers change for 4.20, round 2:
 - A series from Aisheng Dong to add SCU firmware driver for i.MX8
   SoCs.  It implements IPC mechanism based on mailbox for message
   exchange between AP and SCU firmware, and a set of SCU IPC
   service APIs used by clients like i.MX8 power domain and clock
   drivers.

* tag 'imx-drivers-4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  MAINTAINERS: imx: include drivers/firmware/imx path
  firmware: imx: add misc svc support
  firmware: imx: add SCU firmware driver support
  dt-bindings: arm: fsl: add scu binding doc
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This patch adds CCF compliant clock driver for ZynqMP.
Clock driver queries supported clock information from
firmware and regiters pll and output clocks with CCF.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Tejas Patel <tejasp@xilinx.com>
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Acked-by: Olof Johansson <olof@lixom.net>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Add documentation to describe Xilinx ZynqMP clock driver
bindings.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Add ZynqMP firmware IOCTL API to control and configure
devices like PLLs, SD, Gem, etc.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Add documentation for embedded energy management interface (EEMI)
APIs. It includes information about eemi ops and how to use them.
It also includes API information and supported IOCTL IDs which can
be used for device and control configuration.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Due to newly added IMX SCU firmware support, let's add
drivers/firmware/imx into maintainership.

Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Add SCU MISC SVC support which provides misc control get/set functions.

Cc: Shawn Guo <shawnguo@kernel.org>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

The System Controller Firmware (SCFW) is a low-level system function
which runs on a dedicated Cortex-M core to provide power, clock, and
resource management. It exists on some i.MX8 processors. e.g. i.MX8QM
(QM, QP), and i.MX8QX (QXP, DX).

This patch implements the SCU firmware IPC function and the common
message sending API sc_call_rpc.

Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Jassi Brar <jassisinghbrar@gmail.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Calling of_node_put() decreases the reference count of a device tree
object, and may free some data.

However, the of_phandle_args structure embedding it is passed to
reset_controller_dev.of_xlate() after that, so it may still be accessed.

Move the call to of_node_put() down to fix this.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
[p.zabel@pengutronix.de: moved of_node_put after mutex_unlock]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

Merge tag 'soc-fsl-next-v4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into next/drivers

NXP/FSL SoC drivers updates for v4.20 take 2

- Update qbman driver to better work with CPU hotplug
- Add Kconfig dependency of 64-bit DMA addressing for qbman driver
- Use last reponse to determine valid bit for qbman driver
- Defer bman_portals probe if bman is not probed
- Add interrupt coalescing APIs to qbman driver

* tag 'soc-fsl-next-v4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux:
  soc: fsl: qbman: add interrupt coalesce changing APIs
  soc: fsl: bman_portals: defer probe after bman's probe
  soc: fsl: qbman: Use last response to determine valid bit
  soc: fsl: qbman: Add 64 bit DMA addressing requirement to QBMan
  soc: fsl: qbman: replace CPU 0 with any online CPU in hotplug handlers
  soc: fsl: qbman: Check if CPU is offline when initializing portals
  soc: fsl: qman_portals: defer probe after qman's probe
  soc: fsl: qbman: add APIs to retrieve the probing status
  soc: fsl: qe: Fix copy/paste bug in ucc_get_tdm_sync_shift()
  soc: fsl: qbman: qman: avoid allocating from non existing gen_pool
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The System Controller Firmware (SCFW) is a low-level system function
which runs on a dedicated Cortex-M core to provide power, clock, and
resource management. It exists on some i.MX8 processors. e.g. i.MX8QM
(QM, QP), and i.MX8QX (QXP, DX).

Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Add the APIs required to control the QMan portal interrupt coalescing
settings.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>

A crash in bman portal probing could not be triggered (as is the case
with qman portals) but it does make calls [1] into the bman driver so
lets make sure the bman portal probing happens after bman's.

[1]  bman_p_irqsource_add() (in bman) called by:
       init_pcfg() called by:
         bman_portal_probe()
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>

Use the last valid response when determining what valid bit
to use next for management commands. This is needed in the
case that the portal was previously used by other software
like a bootloader or if the kernel is restarted without a
hardware reset.
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>

The QBMan block is memory mapped on SoCs above a 32 bit (4 Gigabyte)
boundary so enabling 64 bit DMA addressing is needed for QBMan to
be usuable.
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>

The existing code sets portal IRQ affinity to CPU 0 in the
offline hotplug handler. If CPU 0 is offline this is invalid.
Use a different online CPU instead.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>

If the CPU to affine the portal interrupt is offline at boot time
affine the portal interrupt to another online CPU. If the CPU is later
brought online the hotplug handler will correctly adjust the affinity.
Moved common code in a function.
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>

NXP/FSL SoC driver fixes for v4.19 round 2

- Fix crash of qman_portal by deferring its probe if qman is not probed

Add reset controller for SDM845 SoCs to control reset signals provided
by PDC Global for Modem, Compute, Display, GPU, Debug, AOP, Sensors,
Audio, SP and APPS
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

Add PDC Global (Power Domain Controller) binding for SDM845 SoCs.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

Merge tag 'omap-for-v4.20/ti-sysc-take2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/drivers

TI sysc driver changes for v4.20 merge window

This series gets rid of the SYSC_QUIRK_RESOURCE_PROVIDER to make device
detection happen mostly only if #define DEBUG is set. Few core devices still
need to be detected to set legacy quirks.

We also add support for booting am335x, am437x and dra7 SoCs with L4 devices
defined in device tree instead of legacy platform data.

And finally we simplify suspend with just SET_NOIRQ_SYSTEM_SLEEP_PM_OPS
and dropping the custom functions that were attempting to work around
issues that really turned out to be child device driver related issues.

Apologies for a late pull request, debugging the suspend issues took a while
and I did not want to send these changes until that got sorted out.

* tag 'omap-for-v4.20/ti-sysc-take2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  bus: ti-sysc: Just use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS
  bus: ti-sysc: Make some warnings debug only
  bus: ti-sysc: Detect devices for debug on dra7
  bus: ti-sysc: Detect timer and gpio on dra7
  bus: ti-sysc: Detect devices on am335x when DEBUG is enabled
  bus: ti-sysc: Detect more devices on am473x for debugging
  bus: ti-sysc: Update revision masks to support am437x
  bus: ti-sysc: Defer suspend as needed
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Fix grammar in reset_control_get_exclusive() documentation comment.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

Merge tag 'imx-drivers-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/drivers

i.MX drivers update for 4.20:
 - A couple of patches from Anson to update variable and macro naming
   in GPCv2 driver, as a preparation of reusing the driver on i.MX8.
 - Switch GPC/GPCv2 drivers to use SPDX identifier for licence claiming.
 - Clean up the unnecessary DT node name NULL pointer checking from
   imx-weim driver, since it can never be NULL at all.
 - A couple of improvements on GPC driver from Sven Schmitt to correct
   PDN register and use GPC_PGC_DOMAIN_* indexes for consistency.

* tag 'imx-drivers-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  soc: imx: gpcv2: Switch to SPDX identifier
  soc: imx: gpc: Switch to SPDX identifier
  bus: imx-weim: drop unnecessary DT node name NULL check
  soc: imx: gpcv2: make pgc driver more generic for other i.MX platforms
  soc: imx: gpcv2: use A_CORE instread of A7 for more i.MX platforms
  soc: imx: gpc: use GPC_PGC_DOMAIN_* indexes
  soc: imx: gpc: fix PDN delay
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'qcom-drivers-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/drivers

Qualcomm ARM Based Driver Updates for v4.20

* Refactor of SCM compatibles and clock requirements
* SMEM cleanup
* Add LLCC EDAC driver
* Fixes for GENI clocks and macros
* Fix includes for llcc-slice and smem
* String overflow fixes for APR and wcnss_ctrl
* Fixup for COMPILE_TEST of qcom driver Kconfigs
* Cleanup of Kconfig depends of rpmh, smd_rpm, smsm, and smp2p
* Add SCM dependencies to SPM and rmtfs-mem

* tag 'qcom-drivers-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: (38 commits)
  soc: qcom: geni: geni_se_clk_freq_match() should always accept multiples
  soc: qcom: geni: Don't ignore clk_round_rate() errors in geni_se_clk_tbl_get()
  soc: qcom: geni: Make version macros simpler
  dt-bindings: firmware: scm: Add MSM8998 and SDM845
  firmware: qcom: scm: Refactor clock handling
  dt-bindings: firmware: scm: Refactor compatibles and clocks
  soc: qcom: smem: a few last cleanups
  soc: qcom: smem: verify partition host ids match
  soc: qcom: smem: small change in global entry loop
  soc: qcom: smem: verify partition offset_free_uncached
  soc: qcom: smem: verify partition header size
  soc: qcom: smem: introduce qcom_smem_partition_header()
  soc: qcom: smem: require order of host ids to match
  soc: qcom: smem: verify both host ids in partition header
  soc: qcom: smem: small refactor in qcom_smem_enumerate_partitions()
  soc: qcom: smem: always ignore partitions with 0 offset or size
  soc: qcom: smem: initialize region struct only when successful
  soc: qcom: smem: rename variable in qcom_smem_get_global()
  drivers: qcom: rpmh-rsc: clear wait_for_compl after use
  soc: qcom: rmtfs-mem: Validate that scm is available
  ...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'actions-drivers+s900-sps-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions into next/drivers

Actions Semi SoC drivers for v4.20 #2

The SPS power domain driver is extended for S900 SoC.
This required merging a topic branch for the new bindings header.

* tag 'actions-drivers+s900-sps-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions:
  soc: actions: sps: Add S900 power domains
  dt-bindings: power: Add Actions Semi S900 SPS
  soc: actions: Update SPS help text for S700
  soc: actions: Convert to SPDX license identifiers
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v4.19-next-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into next/drivers

PMIC wrapper:
- sort SoCs and PMICs ascending
- add capabilities
- add support for mt8183 SoC + mt6358 PMIC
- return false instead of 0
- add support for mt6765 SoC + mt6357 PMIC

* tag 'v4.19-next-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
  soc: mediatek: pwrap: add mt6357 driver for mt6765 SoCs
  soc: mediatek: pwrap: add pwrap driver for mt6765 SoCs
  dt-bindings: pwrap: mediatek: add pwrap support for MT6765
  soc: mediatek: pwrap: use true and false for boolean values
  soc: mediatek: add mt8183 pwrap support
  soc: mediatek: pwrap: use group of bits for pwrap capability
  soc: mediatek: pwrap: order SoCs and PMICs ascending
  dt-bindings: mediatek: add compatible for mt8183 pwrap
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'sunxi-drivers-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/drivers

Allwinner drivers changes for 4.20

The H6 is now supported in our SRAM driver bindings, and we have a small
Makefile change for the SRAM driver to build it without building the
ARCH_SUNXI architecture, especially relevant for the COMPILE_TEST case.

* tag 'sunxi-drivers-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  dt-bindings: sunxi-sram: add binding for Allwinner H6 SRAM C
  drivers: soc: Allow building the sunxi driver without ARCH_SUNXI
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Defer probe of qman portals after qman probing. This fixes the crash
below, seen on NXP LS1043A SoCs:

Unable to handle kernel NULL pointer dereference at virtual address
0000000000000004
Mem abort info:
  ESR = 0x96000004
  Exception class = DABT (current EL), IL = 32 bits
  SET = 0, FnV = 0
  EA = 0, S1PTW = 0
Data abort info:
  ISV = 0, ISS = 0x00000004
  CM = 0, WnR = 0
[0000000000000004] user address but active_mm is swapper
Internal error: Oops: 96000004 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted
4.18.0-rc1-next-20180622-00200-g986f5c179185 #9
Hardware name: LS1043A RDB Board (DT)
pstate: 80000005 (Nzcv daif -PAN -UAO)
pc : qman_set_sdest+0x74/0xa0
lr : qman_portal_probe+0x22c/0x470
sp : ffff00000803bbc0
x29: ffff00000803bbc0 x28: 0000000000000000
x27: ffff0000090c1b88 x26: ffff00000927cb68
x25: ffff00000927c000 x24: ffff00000927cb60
x23: 0000000000000000 x22: 0000000000000000
x21: ffff0000090e9000 x20: ffff800073b5c810
x19: ffff800027401298 x18: ffffffffffffffff
x17: 0000000000000001 x16: 0000000000000000
x15: ffff0000090e96c8 x14: ffff80002740138a
x13: ffff0000090f2000 x12: 0000000000000030
x11: ffff000008f25000 x10: 0000000000000000
x9 : ffff80007bdfd2c0 x8 : 0000000000004000
x7 : ffff80007393cc18 x6 : 0040000000000001
x5 : 0000000000000000 x4 : ffffffffffffffff
x3 : 0000000000000004 x2 : ffff00000927c900
x1 : 0000000000000000 x0 : 0000000000000004
Process swapper/0 (pid: 1, stack limit = 0x(____ptrval____))
Call trace:
 qman_set_sdest+0x74/0xa0
 platform_drv_probe+0x50/0xa8
 driver_probe_device+0x214/0x2f8
 __driver_attach+0xd8/0xe0
 bus_for_each_dev+0x68/0xc8
 driver_attach+0x20/0x28
 bus_add_driver+0x108/0x228
 driver_register+0x60/0x110
 __platform_driver_register+0x40/0x48
 qman_portal_driver_init+0x20/0x84
 do_one_initcall+0x58/0x168
 kernel_init_freeable+0x184/0x22c
 kernel_init+0x10/0x108
 ret_from_fork+0x10/0x18
Code: f9400443 11001000 927e4800 8b000063 (b9400063)
---[ end trace 4f6d50489ecfb930 ]---
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>

As Grygorii Strashko pointed out, the runtime PM use count of the
children can be whatever at suspend and we should not use it. So
let's just suspend ti-sysc at noirq level and get rid of some code.

Let's also remove the PM_SLEEP ifdef and use __maybe_unused as the
PM code already deals with the ifdefs.
Suggested-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Adopt the SPDX license identifier headers to ease license compliance
management.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Adopt the SPDX license identifier headers to ease license compliance
management.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Checking the child node names is pointless as the DT node name can
never be NULL, so remove it.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

i.MX8MQ and i.MX8MM share same gpc module with i.MX7D, they
can reuse gpcv2 pgc driver for power domain control, this
patch renames all functions and structure definitions started
with "imx7" to "imx", and use .data in imx_gpcv2_dt_ids[] to
pass platform specific power domain data for power domain
driver, thus make gpcv2 pgc driver more generic for i.MX
platforms.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Acked-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

gpcv2 driver is NOT just used on i.MX7D which has Cortex-A7
cores, but also on i.MX8MQ/i.MX8MM platforms which use Cortex-A53
cores, so let's use A_CORE instread of A7 to avoid confusion.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Acked-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Immutable branch for QCOM Geni patches