This driver for the "Lenovo ThinkPad USB Keyboard with Trackpoint" supports
setting various device attributes, controlling mute and microphone mute
LEDs and enables use of the microphone mute key.
Signed-off-by: Bernhard Seibold <mail@bernhard-seibold.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Pull HID subsystem updates from Jiri Kosina:
 "Apart from various driver updates and added support for a number of
  new devices (mostly multitouch ones, but not limited to), there is one
  change that is worth pointing out explicitly: creation of HID device
  groups and proper autoloading of hid-multitouch, implemented by Henrik
  Rydberg."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (50 commits)
  HID: wacom: fix build breakage without CONFIG_LEDS_CLASS
  HID: waltop: Extend barrel button fix
  HID: hyperv: Set the hid drvdata correctly
  HID: wacom: Unify speed setting
  HID: wacom: Add speed setting for Intuos4 WL
  HID: wacom: Move Graphire raport header check.
  HID: uclogic: Add support for UC-Logic TWHL850
  HID: explain the signed/unsigned handling in hid_add_field()
  HID: handle logical min/max signedness properly in parser
  HID: logitech: read all 32 bits of report type bitfield
  HID: wacom: Add LED selector control for Wacom Intuos4 WL
  HID: hid-multitouch: fix wrong protocol detection
  HID: wiimote: Fix IR data parser
  HID: wacom: Add tilt reporting for Intuos4 WL
  HID: multitouch: MT interface matching for Baanto
  HID: hid-multitouch: Only match MT interfaces
  HID: Create a common generic driver
  HID: hid-multitouch: Switch to device groups
  HID: Create a generic device group
  HID: Allow bus wildcard matching
  ...

Pull x86/apic changes from Ingo Molnar:
 "Most of the changes are about helping virtualized guest kernels
  achieve better performance."

Fix up trivial conflicts with the iommu updates to arch/x86/kernel/apic/io_apic.c

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/apic: Implement EIO micro-optimization
  x86/apic: Add apic->eoi_write() callback
  x86/apic: Use symbolic APIC_EOI_ACK
  x86/apic: Fix typo EIO_ACK -> EOI_ACK and document it
  x86/xen/apic: Add missing #include <xen/xen.h>
  x86/apic: Only compile local function if used with !CONFIG_GENERIC_PENDING_IRQ
  x86/apic: Fix UP boot crash
  x86: Conditionally update time when ack-ing pending irqs
  xen/apic: implement io apic read with hypercall
  Revert "xen/x86: Workaround 'x86/ioapic: Add register level checks to detect bogus io-apic entries'"
  xen/x86: Implement x86_apic_ops
  x86/apic: Replace io_apic_ops with x86_io_apic_ops.

Pull scheduler changes from Ingo Molnar:
 "The biggest change is the cleanup/simplification of the load-balancer:
  instead of the current practice of architectures twiddling scheduler
  internal data structures and providing the scheduler domains in
  colorfully inconsistent ways, we now have generic scheduler code in
  kernel/sched/core.c:sched_init_numa() that looks at the architecture's
  node_distance() parameters and (while not fully trusting it) deducts a
  NUMA topology from it.

  This inevitably changes balancing behavior - hopefully for the better.

  There are various smaller optimizations, cleanups and fixlets as well"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Taint kernel with TAINT_WARN after sleep-in-atomic bug
  sched: Remove stale power aware scheduling remnants and dysfunctional knobs
  sched/debug: Fix printing large integers on 32-bit platforms
  sched/fair: Improve the ->group_imb logic
  sched/nohz: Fix rq->cpu_load[] calculations
  sched/numa: Don't scale the imbalance
  sched/fair: Revert sched-domain iteration breakage
  sched/x86: Rewrite set_cpu_sibling_map()
  sched/numa: Fix the new NUMA topology bits
  sched/numa: Rewrite the CONFIG_NUMA sched domain support
  sched/fair: Propagate 'struct lb_env' usage into find_busiest_group
  sched/fair: Add some serialization to the sched_domain load-balance walk
  sched/fair: Let minimally loaded cpu balance the group
  sched: Change rq->nr_running to unsigned int
  x86/numa: Check for nonsensical topologies on real hw as well
  x86/numa: Hard partition cpu topology masks on node boundaries
  x86/numa: Allow specifying node_distance() for numa=fake
  x86/sched: Make mwait_usable() heed to "idle=" kernel parameters properly
  sched: Update documentation and comments
  sched_rt: Avoid unnecessary dequeue and enqueue of pushable tasks in set_cpus_allowed_rt()

Pull perf changes from Ingo Molnar:
 "Lots of changes:

   - (much) improved assembly annotation support in perf report, with
     jump visualization, searching, navigation, visual output
     improvements and more.

    - kernel support for AMD IBS PMU hardware features.  Notably 'perf
      record -e cycles:p' and 'perf top -e cycles:p' should work without
      skid now, like PEBS does on the Intel side, because it takes
      advantage of IBS transparently.

    - the libtracevents library: it is the first step towards unifying
      tracing tooling and perf, and it also gives a tracing library for
      external tools like powertop to rely on.

    - infrastructure: various improvements and refactoring of the UI
      modules and related code

    - infrastructure: cleanup and simplification of the profiling
      targets code (--uid, --pid, --tid, --cpu, --all-cpus, etc.)

    - tons of robustness fixes all around

    - various ftrace updates: speedups, cleanups, robustness
      improvements.

    - typing 'make' in tools/ will now give you a menu of projects to
      build and a short help text to explain what each does.

    - ... and lots of other changes I forgot to list.

  The perf record make bzImage + perf report regression you reported
  should be fixed."

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (166 commits)
  tracing: Remove kernel_lock annotations
  tracing: Fix initial buffer_size_kb state
  ring-buffer: Merge separate resize loops
  perf evsel: Create events initially disabled -- again
  perf tools: Split term type into value type and term type
  perf hists: Fix callchain ip printf format
  perf target: Add uses_mmap field
  ftrace: Remove selecting FRAME_POINTER with FUNCTION_TRACER
  ftrace/x86: Have x86 ftrace use the ftrace_modify_all_code()
  ftrace: Make ftrace_modify_all_code() global for archs to use
  ftrace: Return record ip addr for ftrace_location()
  ftrace: Consolidate ftrace_location() and ftrace_text_reserved()
  ftrace: Speed up search by skipping pages by address
  ftrace: Remove extra helper functions
  ftrace: Sort all function addresses, not just per page
  tracing: change CPU ring buffer state from tracing_cpumask
  tracing: Check return value of tracing_dentry_percpu()
  ring-buffer: Reset head page before running self test
  ring-buffer: Add integrity check at end of iter read
  ring-buffer: Make addition of pages in ring buffer atomic
  ...

Pull cgroup updates from Tejun Heo:
 "cgroup file type addition / removal is updated so that file types are
  added and removed instead of individual files so that dynamic file
  type addition / removal can be implemented by cgroup and used by
  controllers.  blkio controller changes which will come through block
  tree are dependent on this.  Other changes include res_counter cleanup
  and disallowing kthread / PF_THREAD_BOUND threads to be attached to
  non-root cgroups.

  There's a reported bug with the file type addition / removal handling
  which can lead to oops on cgroup umount.  The issue is being looked
  into.  It shouldn't cause problems for most setups and isn't a
  security concern."

Fix up trivial conflict in Documentation/feature-removal-schedule.txt

* 'for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (21 commits)
  res_counter: Account max_usage when calling res_counter_charge_nofail()
  res_counter: Merge res_counter_charge and res_counter_charge_nofail
  cgroups: disallow attaching kthreadd or PF_THREAD_BOUND threads
  cgroup: remove cgroup_subsys->populate()
  cgroup: get rid of populate for memcg
  cgroup: pass struct mem_cgroup instead of struct cgroup to socket memcg
  cgroup: make css->refcnt clearing on cgroup removal optional
  cgroup: use negative bias on css->refcnt to block css_tryget()
  cgroup: implement cgroup_rm_cftypes()
  cgroup: introduce struct cfent
  cgroup: relocate __d_cgrp() and __d_cft()
  cgroup: remove cgroup_add_file[s]()
  cgroup: convert memcg controller to the new cftype interface
  memcg: always create memsw files if CONFIG_CGROUP_MEM_RES_CTLR_SWAP
  cgroup: convert all non-memcg controllers to the new cftype interface
  cgroup: relocate cftype and cgroup_subsys definitions in controllers
  cgroup: merge cft_release_agent cftype array into the base files array
  cgroup: implement cgroup_add_cftypes() and friends
  cgroup: build list of all cgroups under a given cgroupfs_root
  cgroup: move cgroup_clear_directory() call out of cgroup_populate_dir()
  ...

Pull percpu updates from Tejun Heo:
 "Contains Alex Shi's three patches to remove percpu_xxx() which overlap
  with this_cpu_xxx().  There shouldn't be any functional change."

* 'for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu: remove percpu_xxx() functions
  x86: replace percpu_xxx funcs with this_cpu_xxx
  net: replace percpu_xxx funcs with this_cpu_xxx or __this_cpu_xxx

Pull workqueue changes from Tejun Heo:
 "Nothing exciting.  Most are updates to debug stuff and related fixes.
  Two not-too-critical bugs are fixed - WARN_ON() triggering spurious
  during cpu offlining and unlikely lockdep related oops."

* 'for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  lockdep: fix oops in processing workqueue
  workqueue: skip nr_running sanity check in worker_enter_idle() if trustee is active
  workqueue: Catch more locking problems with flush_work()
  workqueue: change BUG_ON() to WARN_ON()
  trace: Remove unused workqueue tracer

Pull staging tree changes from Greg Kroah-Hartman:
 "Here is the big staging tree pull request for the 3.5-rc1 merge
  window.

  Loads of changes here, and we just narrowly added more lines than we
  added:
   622 files changed, 28356 insertions(+), 26059 deletions(-)

  But, good news is that there is a number of subsystems that moved out
  of the staging tree, to their respective "real" portions of the
  kernel.

  Code that moved out was:
	- iio core code
	- mei driver
	- vme core and bridge drivers

  There was one broken network driver that moved into staging as a step
  before it is removed from the tree (pc300), and there was a few new
  drivers added to the tree:
	- new iio drivers
	- gdm72xx wimax USB driver
	- ipack subsystem and 2 drivers

  All of the movements around have acks from the various subsystem
  maintainers, and all of this has been in the linux-next tree for a
  while.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fixed up various trivial conflicts, along with a non-trivial one found
in -next and pointed out by Olof Johanssen: a clean - but incorrect -
merge of the arch/arm/boot/dts/at91sam9g20.dtsi file.  Fix up manually
as per Stephen Rothwell.

* tag 'staging-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (536 commits)
  Staging: bcm: Remove two unused variables from Adapter.h
  Staging: bcm: Removes the volatile type definition from Adapter.h
  Staging: bcm: Rename all "INT" to "int" in Adapter.h
  Staging: bcm: Fix warning: __packed vs. __attribute__((packed)) in Adapter.h
  Staging: bcm: Correctly format all comments in Adapter.h
  Staging: bcm: Fix all whitespace issues in Adapter.h
  Staging: bcm: Properly format braces in Adapter.h
  Staging: ipack/bridges/tpci200: remove unneeded casts
  Staging: ipack/bridges/tpci200: remove TPCI200_SHORTNAME constant
  Staging: ipack: remove board_name and bus_name fields from struct ipack_device
  Staging: ipack: improve the register of a bus and a device in the bus.
  staging: comedi: cleanup all the comedi_driver 'detach' functions
  staging: comedi: remove all 'default N' in Kconfig
  staging: line6/config.h: Delete unused header
  staging: gdm72xx depends on NET
  staging: gdm72xx: Set up parent link in sysfs for gdm72xx devices
  staging: drm/omap: initial dmabuf/prime import support
  staging: drm/omap: dmabuf/prime mmap support
  pstore/ram: Add ECC support
  pstore/ram: Switch to persistent_ram routines
  ...

Pull TTY updates from Greg Kroah-Hartman:
 "Here's the big TTY/serial driver pull request for the 3.5-rc1 merge
  window.

  Nothing major in here, just lots of incremental changes from Alan and
  Jiri reworking some tty core things to behave better and to get a more
  solid grasp on some of the nasty tty locking issues.

  There are a few tty and serial driver updates in here as well.

  All of this has been in the linux-next releases for a while with no
  problems.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'tty-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (115 commits)
  serial: bfin_uart: Make MMR access compatible with 32 bits bf609 style controller.
  serial: bfin_uart: RTS and CTS MMRs can be either 16-bit width or 32-bit width.
  serial: bfin_uart: narrow the reboot condition in DMA tx interrupt
  serial: bfin_uart: Adapt bf5xx serial driver to bf60x serial4 controller.
  Revert "serial_core: Update buffer overrun statistics."
  tty: hvc_xen: NULL dereference on allocation failure
  tty: Fix LED error return
  tty: Allow uart_register/unregister/register
  tty: move global ldisc idle waitqueue to the individual ldisc
  serial8250-em: Add DT support
  serial8250-em: clk_get() IS_ERR() error handling fix
  serial_core: Update buffer overrun statistics.
  tty: drop the pty lock during hangup
  cris: fix missing tty arg in wait_event_interruptible_tty call
  tty/amiserial: Add missing argument for tty_unlock()
  tty_lock: Localise the lock
  pty: Lock the devpts bits privately
  tty_lock: undo the old tty_lock use on the ctty
  serial8250-em: Emma Mobile UART driver V2
  Add missing call to uart_update_timeout()
  ...

Pull driver core updates from Greg Kroah-Hartman:
 "Here's the driver core, and other driver subsystems, pull request for
  the 3.5-rc1 merge window.

  Outside of a few minor driver core changes, we ended up with the
  following different subsystem and core changes as well, due to
  interdependancies on the driver core:
   - hyperv driver updates
   - drivers/memory being created and some drivers moved into it
   - extcon driver subsystem created out of the old Android staging
     switch driver code
   - dynamic debug updates
   - printk rework, and /dev/kmsg changes

  All of this has been tested in the linux-next releases for a few weeks
  with no reported problems.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fix up conflicts in drivers/extcon/extcon-max8997.c where git noticed
that a patch to the deleted drivers/misc/max8997-muic.c driver needs to
be applied to this one.

* tag 'driver-core-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (90 commits)
  uio_pdrv_genirq: get irq through platform resource if not set otherwise
  memory: tegra{20,30}-mc: Remove empty *_remove()
  printk() - isolate KERN_CONT users from ordinary complete lines
  sysfs: get rid of some lockdep false positives
  Drivers: hv: util: Properly handle version negotiations.
  Drivers: hv: Get rid of an unnecessary check in vmbus_prep_negotiate_resp()
  memory: tegra{20,30}-mc: Use dev_err_ratelimited()
  driver core: Add dev_*_ratelimited() family
  Driver Core: don't oops with unregistered driver in driver_find_device()
  printk() - restore prefix/timestamp printing for multi-newline strings
  printk: add stub for prepend_timestamp()
  ARM: tegra30: Make MC optional in Kconfig
  ARM: tegra20: Make MC optional in Kconfig
  ARM: tegra30: MC: Remove unnecessary BUG*()
  ARM: tegra20: MC: Remove unnecessary BUG*()
  printk: correctly align __log_buf
  ARM: tegra30: Add Tegra Memory Controller(MC) driver
  ARM: tegra20: Add Tegra Memory Controller(MC) driver
  printk() - restore timestamp printing at console output
  printk() - do not merge continuation lines of different threads
  ...

Pull Char/Misc patches from Greg Kroah-Hartman:
 "Here are a few various char/misc tree patches for the 3.5-rc1 merge
  window.

  Nothing major here at all, just different driver updates and some
  parport dead code removal.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'char-misc-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  parport: remove unused dead code from lowlevel drivers
  xilinx_hwicap: reset XHI_MAX_RETRIES
  xilinx_hwicap: add support for virtex6 FPGAs
  Support M95040 SPI EEPROM
  misc: add support for bmp18x chips to the bmp085 driver
  misc: bmp085: add device tree properties
  misc: clean up bmp085 driver
  misc: do not mark exported functions __devexit
  misc: add missing __devexit_p() annotations
  pch_phub: delete duplicate definitions
  misc: Fix irq leak in max8997_muic_probe error path

Pull USB 3.5-rc1 changes from Greg Kroah-Hartman:
 "Here is the big USB 3.5-rc1 pull request for the 3.5-rc1 merge window.

  It's touches a lot of different parts of the kernel, all USB drivers,
  due to some API cleanups (getting rid of the ancient err() macro) and
  some changes that are needed for USB 3.0 power management updates.

  There are also lots of new drivers, pimarily gadget, but others as
  well.  We deleted a staging driver, which was nice, and finally
  dropped the obsolete usbfs code, which will make Al happy to never
  have to touch that again.

  There were some build errors in the tree that linux-next found a few
  days ago, but those were fixed by the most recent changes (all were
  due to us not building with CONFIG_PM disabled.)

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'usb-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (477 commits)
  xhci: Fix DIV_ROUND_UP compile error.
  xhci: Fix compile with CONFIG_USB_SUSPEND=n
  USB: Fix core compile with CONFIG_USB_SUSPEND=n
  brcm80211: Fix compile error for .disable_hub_initiated_lpm.
  Revert "USB: EHCI: work around bug in the Philips ISP1562 controller"
  MAINTAINERS: Add myself as maintainer to the USB PHY Layer
  USB: EHCI: fix command register configuration lost problem
  USB: Remove races in devio.c
  USB: ehci-platform: remove update_device
  USB: Disable hub-initiated LPM for comms devices.
  xhci: Add Intel U1/U2 timeout policy.
  xhci: Add infrastructure for host-specific LPM policies.
  USB: Add macros for interrupt endpoint types.
  xhci: Reserve one command for USB3 LPM disable.
  xhci: Some Evaluate Context commands must succeed.
  USB: Disable USB 3.0 LPM in critical sections.
  USB: Add support to enable/disable USB3 link states.
  USB: Allow drivers to disable hub-initiated LPM.
  USB: Calculate USB 3.0 exit latencies for LPM.
  USB: Refactor code to set LPM support flag.
  ...

Conflicts:
	arch/arm/mach-exynos/mach-nuri.c
	arch/arm/mach-exynos/mach-universal_c210.c
	drivers/net/wireless/ath/ath6kl/usb.c

Pull arm-soc board specific changes from Olof Johansson:
 "While we generally attempt to get rid of board specific files and
  replace them with device tree based descriptions, a lot of platforms
  have not come that far:

  In shmobile, we add two new board files because their recently started
  effort to add DT support has not proceeded enough to use it for all of
  the important hardware.

  In Kirkwood, we are adding support for new boards with a combination
  of DT and board file contents in multiple cases.

  pxa/mmp and imx are extending support for existing board files but not
  adding new ones."

Fix up trivial conflicts in arch/arm/mach-{mmp/ttc_dkb.c,shmobile/{Kconfig,Makefile}}

* tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (94 commits)
  ARM: shmobile: fix smp build
  ARM: kirkwood: Add support for RaidSonic IB-NAS6210/6220 using devicetree
  kirkwood: Add iconnect support
  orion/kirkwood: create a generic function for gpio led blinking
  kirkwood/orion: fix orion_gpio_set_blink
  ARM: kirkwood: Define DNS-320/DNS-325 NAND in fdt
  kirkwood: Allow nand to be configured via. devicetree
  mtd: Add orion_nand devicetree bindings
  ARM: kirkwood: Basic support for DNS-320 and DNS-325
  ARM: mach-shmobile: Use DT_MACHINE for armadillo 800 eva
  ARM: mach-shmobile: Use DT_MACHINE for KZM9G
  ARM: pxa: hx4700: Add Synaptics NavPoint touchpad
  ARM: pxa: Use REGULATOR_SUPPLY macro
  ARM: mach-shmobile: kzm9g: enable SMP boot
  ARM: mach-shmobile: kzm9g: defconfig update
  ARM: mach-shmobile: kzm9g: add PCF8757 gpio-key
  ARM: mach-shmobile: kzm9g: add SDHI support
  ARM: mach-shmobile: kzm9g: add MMCIF support
  ARM: mach-shmobile: kzm9g: correct screen direction
  ARM: mach-shmobile: sh73a0.h: add GPIO_NR
  ...

Pull arm-soc power management changes from Olof Johansson:
 "Power management changes here are mostly for the omap platform, but
  also include cpuidle changes for ux500 and suspend/resume code for
  mmp."

* tag 'pm' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits)
  ARM: OMAP2+: WDTIMER integration: fix !PM boot crash, disarm timer after hwmod reset
  ARM: OMAP2/3: hwmod data: Add 32k-sync timer data to hwmod database
  ARM: OMAP4: hwmod_data: Name the common irq for McBSP ports
  ARM: OMAP4: hwmod data: I2C: add flag for context restore
  ARM: OMAP3: hwmod_data: Rename the common irq for McBSP ports
  ARM: OMAP2xxx: hwmod data: add HDQ/1-wire hwmod
  ARM: OMAP3: hwmod data: add HDQ/1-wire hwmod
  ARM: OMAP2+: hwmod data: add HDQ/1-wire hwmod shared data
  ARM: OMAP2+: HDQ1W: add custom reset function
  ARM: OMAP2420: hwmod data: Add MMC hwmod data for 2420
  arm: omap3: clockdomain data: Remove superfluous commas from gfx_sgx_3xxx_wkdeps[]
  ARM: OMAP2+: powerdomain: Get rid off duplicate pwrdm_clkdm_state_switch() API
  ARM: OMAP3: clock data: add clockdomain for HDQ functional clock
  ARM: OMAP3+: dpll: Configure autoidle mode only if it's supported
  ARM: OMAP2+: dmtimer: cleanup iclk usage
  ARM: OMAP4+: Add prm and cm base init function.
  ARM: OMAP2/3: Add idle_st bits for ST_32KSYNC timer to prcm-common header
  ARM: OMAP3: Fix CM register bit masks
  ARM: OMAP: clock: convert AM3517/3505 detection/flags to AM35xx
  ARM: OMAP3: clock data: treat all AM35x devices the same
  ...

Pull arm soc-specific pinctrl changes from Olof Johansson:
 "With this, five platforms are moving to the relatively new pinctrl
  subsystem for their pin management, replacing the older soc specific
  in-kernel interfaces with common code.

  There is quite a bit of net addition of code for each platform being
  added to the pinctrl subsystem.  But the payback comes later when
  adding new boards can be done by only providing new device trees
  instead."

Fix up trivial conflicts in arch/arm/mach-ux500/{Makefile,board-mop500.c}

* tag 'pinctrl' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (61 commits)
  mtd: nand: gpmi: fix compile error caused by pinctrl call
  ARM: PRIMA2: select PINCTRL and PINCTRL_SIRF in Kconfig
  ARM: nomadik: enable PINCTRL_NOMADIK where needed
  ARM: mxs: enable pinctrl support
  video: mxsfb: adopt pinctrl support
  ASoC: mxs-saif: adopt pinctrl support
  i2c: mxs: adopt pinctrl support
  mtd: nand: gpmi: adopt pinctrl support
  mmc: mxs-mmc: adopt pinctrl support
  serial: mxs-auart: adopt pinctrl support
  serial: amba-pl011: adopt pinctrl support
  spi/imx: adopt pinctrl support
  i2c: imx: adopt pinctrl support
  can: flexcan: adopt pinctrl support
  net: fec: adopt pinctrl support
  ARM: ux500: switch MSP to using pinctrl for pins
  ARM: ux500: alter MSP registration to return a device pointer
  ARM: ux500: switch to using pinctrl for uart0
  ARM: ux500: delete custom pin control system
  ARM: ux500: switch over to Nomadik pinctrl driver
  ...

Pull support for new arm SoCs from Olof Johansson:
 "Three new system-on-chip models are supported: the st-ericsson u9540
  in ux500, the sam9n12 in at91 and the emma ev2 in shmobile.

  Emma is a little bit special because it is completely unrelated to the
  classic shmobile models, but the new Renesas rmobile SoCs are a
  combination of things from both Emma and shmobile, so it was decided
  to have them all live in one directory.

  This also contains updates to existing shmobile soc code as well as
  some related board changes due to dependencies."

* tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (23 commits)
  mach-shmobile: Use DT_MACHINE for KZM9D V3
  mach-shmobile: Emma Mobile EV2 DT support V3
  mach-shmobile: KZM9D board Ethernet support V3
  mach-shmobile: Emma Mobile EV2 GPIO support V3
  mach-shmobile: Emma Mobile EV2 SMP support V3
  mach-shmobile: KZM9D board support V3
  mach-shmobile: Emma Mobile EV2 SoC base support V3
  gpio: Emma Mobile GPIO driver V2
  ARM: mach-shmobile: sh73a0: fixup PINT/IRQ16-IRQ31 irq number conflict
  ARM: mach-shmobile: clock-r8a7740: use followparent_recalc on usb24s
  ARM: mach-shmobile: clock-r8a7740: add MMCIF clock
  ARM: mach-shmobile: clock-r8a7740: add SDHI clock
  ARM: mach-shmobile: clock-r8a7740: add USB clock
  ARM: mach-shmobile: clock-r8a7740: add FSI clock
  ARM: mach-shmobile: r8a7740: cleanup I2C workaround method
  ARM: mach-shmobile: r8a7740: add gpio_irq support
  ARM: mach-shmobile: sh7372: Add FSI DMAEngine support
  ARM / mach-shmobile: Use preset_lpj with calibrate_delay()
  ARM: ux500: ioremap differences for DB9540
  ARM: ux500: core U9540 support
  ...

Pull device tree conversions for arm-soc, part 1, from Olof Johansson:
 "The spear3xx, lpc32xx, shmobile and mmp platforms are joining the game
  of booting using device trees, which is a great step forward for them.
  at91 and spear have pretty much completed this process with a huge
  amount of work being put into at91.  The other platforms are
  continuing the process.

  We finally start to see the payback on this investment, as new
  machines are getting supported purely by adding a .dts source file
  that can be completely independent of the kernel source."

Fix up trivial conflict in arch/arm/Kconfig

* tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits)
  ARM: at91: Add ADC driver to at91sam9260/at91sam9g20 dtsi files
  arm/dts: omap4-panda: Add LEDs support
  arm/dts: omap4-sdp: Add LEDs support
  arm/dts: twl4030: Add twl4030-gpio node
  OMAP4: devices: Do not create mcpdm device if the dtb has been provided
  OMAP4: devices: Do not create dmic device if the dtb has been provided
  Documentation: update docs for mmp dt
  ARM: dts: refresh dts file for arch mmp
  ARM: mmp: support pxa910 with device tree
  ARM: mmp: support mmp2 with device tree
  gpio: pxa: parse gpio from DTS file
  ARM: mmp: support DT in timer
  ARM: mmp: support DT in irq
  ARM: mmp: append CONFIG_MACH_MMP2_DT
  ARM: mmp: fix build issue on mmp with device tree
  ARM: ux500: Enable PRCMU Timer 4 (clocksource) for Device Tree
  ARM: ux500: Disable SMSC911x platform code registration when DT is enabled
  ARM: ux500: Fork cpu-db8500 platform_devs for sequential DT enablement
  ARM: ux500: Do not attempt to register non-existent i2c devices on Snowball
  ARM: SPEAr3xx: Correct keyboard data passed from DT
  ...

Pull non-critical arm-soc bug fixes from Olof Johansson:
 "These bug fixes were not important enough to have them included in the
  v3.4 release, mostly because they cover harmless warnings or
  unrealistic configurations.  Instead we queue them up to be picked up
  in the next merge window."

Fixed up trivial conflict in arch/arm/mach-omap2/board-omap4panda.c

* tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: spear6xx: remove board selection options
  ARM: OMAP: igep0020: Specify the VPLL2 regulator unconditionally
  ARM: OMAP2+: INTC: fix Kconfig option for TI81XX
  ARM: OMAP2+: remove incorrect irq_chip ack field
  ARM: OMAP4: Adding ID for OMAP4460 ES1.1
  ARM: OMAP4: panda: add statics to remove warnings
  ARM: OMAP2+: Incorrect Register Offsets in OMAP Mailbox
  ARM: OMAP: fix trivial warnings for dspbridge
  arm: davinci: use for_each_set_bit_from
  ARM: OMAP4: hsmmc: check for null pointer
  ARM: OMAP1: fix compilation issue in board-sx1.c
  ARM: disable SUSPEND/ARCH_SUSPEND_POSSIBLE for ARCH_TEGRA
  ARM: davinci: da850-evm: fix section mismatch
  ARM: tegra: add pll_x freq table entry for 750MHz
  ARM: davinci: mark spi_board_info arguments as const
  ARM: davinci: fix incorrect pdctl next bit position

Pull first batch of arm-soc cleanups from Olof Johansson:
 "These cleanups are basically all over the place.  The idea is to
  collect changes with minimal impact but large number of changes so we
  can avoid them from distracting in the diffstat in the other series.

  A significant number of lines get removed here, in particular because
  the ixp2000 and ixp23xx platforms get removed.  These have never been
  extremely popular and have fallen into disuse over time with no active
  maintainer taking care of them.  The u5500 soc never made it into a
  product, so we are removing it from the ux500 platform.

  Many good cleanups also went into the at91 and omap platforms, as has
  been the case for a number of releases."

Trivial modify-delete conflicts in arch/arm/mach-{ixp2000,ixp23xx}

* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (152 commits)
  ARM: clps711x: Cleanup IRQ handling
  ARM clps711x: Removed unused header mach/time.h
  ARM: clps711x: Added note about support EP731x CPU to Kconfig
  ARM: clps711x: Added missing register definitions
  ARM: clps711x: Used own subarch directory for store header file
  Dove: Fix Section mismatch warnings
  ARM: orion5x: ts78xx debugging changes
  ARM: orion5x: remove PM dependency from ts78xx
  ARM: orion5x: ts78xx fix NAND resource off by one
  ARM: orion5x: ts78xx whitespace cleanups
  Orion5x: Fix Section mismatch warnings
  Orion5x: Fix warning: struct pci_dev declared inside paramter list
  ARM: clps711x: Combine header files into one for clps711x-targets
  ARM: S3C24XX: Use common macro to define resources on mach-qt2410.c
  ARM: S3C24XX: Use common macro to define resources on mach-osiris.c
  ARM: EXYNOS: Adapt to cpuidle core time keeping and irq enable
  ARM: S5PV210: Use common macro to define resources on mach-smdkv210.c
  ARM: S5PV210: Use common macro to define resources on dev-audio.c
  ARM: S5PC100: Use common macro to define resources on dev-audio.c
  ARM: S5P64X0: Use common macro to define resources on dev-audio.c
  ...

Pull arm-soc updates for MAINTAINERS file from Olof Johansson:
 "This is a collection of updates to the MAINTAINERS file, separated out
  mostly to give an overview of what has changed regarding who does what.

  In particular, at91, orion and prima2 platforms and drivers are
  updated in this batch."

* tag 'maintainers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  MAINTAINER: add some drivers upstreamed in CSR SIRFPRIMA2
  maintainership update for the Marvell Orion family of SOCs
  MAINTAINERS: remove non-responding web link for atmel_usba driver
  MAINTAINERS: add entry for Atmel timer counter (TC)
  MAINTAINERS: add entry for Atmel DMA driver
  MAINTAINERS: add entry for Atmel touch screen ADC controller driver
  MAINTAINERS: add entry for Atmel isi driver

Pull ktest updates from Steven Rostedt.

* tag 'ktest-v3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
  ktest: Add README to explain what is in the examples directory
  ktest: Add the snowball.conf example config
  ktest: Add an example config that does cross compiling of several archs
  ktest: Add kvm.conf example config
  ktest: Add useful example configs
  ktest: Add USE_OUTPUT_MIN_CONFIG to avoid prompt on make_min_config
  ktest: Add MIN_CONFIG_TYPE to allow making a minum .config that has network
  ktest: Fix kernelrevision with POST_BUILD

Conflicts:
	drivers/hid/hid-core.c

Conflicts:
	drivers/hid/hid-core.c

Add a README that explains what the different example configs in the
ktest example directory are about.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

I used the snowball.conf in a live demo that demonstrated how to use
ktest.pl with a snowball ARM board. I've been asked to included that
config in the ktest repository.

Here it is.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Add the config that I use to test several archs. I downloaded several
cross compilers from:

 http://kernel.org/pub/tools/crosstool/files/bin/x86_64/

and this config is an example to crosscompile several archs to make sure
that your changes do not break archs that you are not working on.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Add an example config that explains how to use ktest with a virtual
guest as the target.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

I've been asked several times to provide more useful example configs for
ktest.pl, as the sample.conf is too complex (because it explains all
configs). This adds configs broken up by use case, and these configs are
based on actual configs that I use on a daily basis.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

If the file that OUTPUT_MIN_CONFIG exists then ktest.pl will prompt the
user and ask them if the OUTPUT_MIN_CONFIG should be used as the
starting point for make_min_config instead of MIN_CONFIG.

This is usually the case, and to allow the user to do so, which is
helpful if the user is creating different min configs based on tests,
and they know one is a superset of another test, they can set
USE_OUTPUT_MIN_CONFIG to one, which will prevent kest.pl from prompting
to use the OUTPUT_MIN_CONFIG and it will just use it.

If USE_OUTPUT_MIN_CONIFG is set to zero, then ktest.pl will continue to
use MIN_CONFIG instead.

The default is that USE_OUTPUT_MIN_CONFIG is undefined.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

When using the MERAM the LCDC line size needs to be programmed with a
MERAM-specific value different than the real frame buffer pitch. Fix it.
Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: stable@vger.kernel.org  # for 3.4
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull core irq changes from Ingo Molnar:
 "A collection of small fixes."

By Thomas Gleixner
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  hexagon: Remove select of not longer existing Kconfig switches
  arm: Select core options instead of redefining them
  genirq: Do not consider disabled wakeup irqs
  genirq: Allow check_wakeup_irqs to notice level-triggered interrupts
  genirq: Be more informative on irq type mismatch
  genirq: Reject bogus threaded irq requests
  genirq: Streamline irq_action

Pull security subsystem updates from James Morris:
 "New notable features:
   - The seccomp work from Will Drewry
   - PR_{GET,SET}_NO_NEW_PRIVS from Andy Lutomirski
   - Longer security labels for Smack from Casey Schaufler
   - Additional ptrace restriction modes for Yama by Kees Cook"

Fix up trivial context conflicts in arch/x86/Kconfig and include/linux/filter.h

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (65 commits)
  apparmor: fix long path failure due to disconnected path
  apparmor: fix profile lookup for unconfined
  ima: fix filename hint to reflect script interpreter name
  KEYS: Don't check for NULL key pointer in key_validate()
  Smack: allow for significantly longer Smack labels v4
  gfp flags for security_inode_alloc()?
  Smack: recursive tramsmute
  Yama: replace capable() with ns_capable()
  TOMOYO: Accept manager programs which do not start with / .
  KEYS: Add invalidation support
  KEYS: Do LRU discard in full keyrings
  KEYS: Permit in-place link replacement in keyring list
  KEYS: Perform RCU synchronisation on keys prior to key destruction
  KEYS: Announce key type (un)registration
  KEYS: Reorganise keys Makefile
  KEYS: Move the key config into security/keys/Kconfig
  KEYS: Use the compat keyctl() syscall wrapper on Sparc64 for Sparc32 compat
  Yama: remove an unused variable
  samples/seccomp: fix dependencies on arch macros
  Yama: add additional ptrace scopes
  ...

Merge tag 'virtio-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus

Pull virtio updates from Rusty Russell.

* tag 'virtio-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  virtio: fix typo in comment
  virtio-mmio: Devices parameter parsing
  virtio_blk: Drop unused request tracking list
  virtio-blk: Fix hot-unplug race in remove method
  virtio: Use ida to allocate virtio index
  virtio: balloon: separate out common code between remove and freeze functions
  virtio: balloon: drop restore_common()
  9p: disconnect channel when PCI device is removed
  virtio: update documentation to v0.9.5 of spec

- Delete "@request_vqs" and "@free_vqs" comments, since
  they are no longer in struct virtio_config_ops.
- According to the macro below, "@val" should be "@v".
Signed-off-by: Chen Baozi <chenbaozi@gmail.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

This patch adds an option to instantiate guest virtio-mmio devices
basing on a kernel command line (or module) parameter, for example:

	virtio_mmio.devices=0x100@0x100b0000:48
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

Benchmark shows small performance improvement on fusion io device.

Before:
  seq-read : io=1,024MB, bw=19,982KB/s, iops=39,964, runt= 52475msec
  seq-write: io=1,024MB, bw=20,321KB/s, iops=40,641, runt= 51601msec
  rnd-read : io=1,024MB, bw=15,404KB/s, iops=30,808, runt= 68070msec
  rnd-write: io=1,024MB, bw=14,776KB/s, iops=29,552, runt= 70963msec

After:
  seq-read : io=1,024MB, bw=20,343KB/s, iops=40,685, runt= 51546msec
  seq-write: io=1,024MB, bw=20,803KB/s, iops=41,606, runt= 50404msec
  rnd-read : io=1,024MB, bw=16,221KB/s, iops=32,442, runt= 64642msec
  rnd-write: io=1,024MB, bw=15,199KB/s, iops=30,397, runt= 68991msec
Signed-off-by: Asias He <asias@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

If we reset the virtio-blk device before the requests already dispatched
to the virtio-blk driver from the block layer are finised, we will stuck
in blk_cleanup_queue() and the remove will fail.

blk_cleanup_queue() calls blk_drain_queue() to drain all requests queued
before DEAD marking. However it will never success if the device is
already stopped. We'll have q->in_flight[] > 0, so the drain will not
finish.

How to reproduce the race:
1. hot-plug a virtio-blk device
2. keep reading/writing the device in guest
3. hot-unplug while the device is busy serving I/O

Test:
~1000 rounds of hot-plug/hot-unplug test passed with this patch.

Changes in v3:
- Drop blk_abort_queue and blk_abort_request
- Use __blk_end_request_all to complete request dispatched to driver

Changes in v2:
- Drop req_in_flight
- Use virtqueue_detach_unused_buf to get request dispatched to driver
Signed-off-by: Asias He <asias@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>