- 23 May, 2022 13 commits
-
-
Vladimir Oltean authored
There is a desire for the felix driver to gain support for multiple tag_8021q CPU ports, but the current model prevents it. This is because ocelot_apply_bridge_fwd_mask() only takes into consideration whether a port is a tag_8021q CPU port, but not whose CPU port it is. We need a model where we can have a direct affinity between an ocelot port and a tag_8021q CPU port. This serves as the basis for multiple CPU ports. Declare a "dsa_8021q_cpu" backpointer in struct ocelot_port which encodes that affinity. Repurpose the "ocelot_set_dsa_8021q_cpu" API to "ocelot_assign_dsa_8021q_cpu" to express the change of paradigm. Note that this change makes the first practical use of the new ocelot_port->index field in ocelot_port_unassign_dsa_8021q_cpu(), where we need to remove the old tag_8021q CPU port from the reserved VLAN range. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
Absorb the final details of calling ocelot_port_{,un}set_dsa_8021q_cpu(), i.e. the need to lock &ocelot->fwd_domain_lock, into the callee, to simplify the caller and permit easier code reuse later. Signed-off-by: -
Vladimir Oltean authored
Add more logic to ocelot_port_{,un}set_dsa_8021q_cpu() from the ocelot switch lib by encapsulating the ocelot_apply_bridge_fwd_mask() call that felix used to have. This is necessary because the CPU port change procedure will also need to do this, and it's good to reduce code duplication by having an entry point in the ocelot switch lib that does all that is needed. Signed-off-by: -
Vladimir Oltean authored
PGID_CPU must be updated every time a port is configured or unconfigured as a tag_8021q CPU port. The ocelot switch lib already has a hook for that operation, so move the updating of PGID_CPU to those hooks. These bits are pretty specific to DSA, so normally I would keep them out of the common switch lib, but when tag_8021q is in use, this has implications upon the forwarding mask determined by ocelot_apply_bridge_fwd_mask() and called extensively by the switch lib. Signed-off-by:
-
Vladimir Oltean authored
PGID_BC is configured statically by ocelot_init() to flood towards the CPU port module, and dynamically by ocelot_port_set_bcast_flood() towards all user ports. When the tagging protocol changes, the intention is to turn off flooding towards the old pipe towards the host, and to turn it on towards the new pipe. Due to a recent change which removed the adjustment of PGID_BC from felix_set_host_flood(), 3 things happen. - when we change from NPI to tag_8021q mode: in this mode, the CPU port module is accessed via registers, and used to read PTP packets with timestamps. We fail to disable broadcast flooding towards the CPU port module, and to enable broadcast flooding towards the physical port that serves as a DSA tag_8021q CPU port. - from tag_8021q to NPI mode: in this mode, the CPU port module is redirected to a physical port. We fail to disable broadcast flooding towards the physical tag_8021q CPU port, and to enable it towards the CPU port module at ocelot->num_phys_ports. - when the ports are put in promiscuous mode, we also fail to update PGID_BC towards the host pipe of the current protocol. First issue means that felix_check_xtr_pkt() has to do extra work, because it will not see only PTP packets, but also broadcasts. It needs to dequeue these packets just to drop them. Third issue is inconsequential, since PGID_BC is allocated from the nonreserved multicast PGID space, and these PGIDs are conveniently initialized to 0x7f (i.e. flood towards all ports except the CPU port module). Broadcasts reach the NPI port via ocelot_init(), and reach the tag_8021q CPU port via the hardware defaults. Second issue is also inconsequential, because we fail both at disabling and at enabling broadcast flooding on a port, so the defaults mentioned above are preserved, and they are fine except for the performance impact. Fixes: 7a29d220 ("net: dsa: felix: reimplement tagging protocol change with function pointers") Signed-off-by:
-
Jakub Kicinski authored
Jakub Kicinski says: ==================== Fix/silence GCC 12 warnings in drivers/net/wireless/ as mentioned off list we'd like to get GCC 12 warnings quashed. This set takes care of the warnings we have in drivers/net/wireless/ mostly by relegating them to W=1/W=2 builds. ==================== Link: https://lore.kernel.org/r/20220520194320.2356236-1-kuba@kernel.orgSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
carl9170 has a big union (struct carl9170_cmd) with all the command types in it. But it allocates buffers only large enough for a given command. This upsets GCC 12: drivers/net/wireless/ath/carl9170/cmd.c:125:30: warning: array subscript ‘struct carl9170_cmd[0]’ is partly outside array bounds of ‘unsigned char[8]’ [-Warray-bounds] 125 | tmp->hdr.cmd = cmd; | ~~~~~~~~~~~~~^~~~~ Punt the warning to W=1 for now. Hopefully GCC will learn to recognize which fields are in-bounds. Acked-by:Christian Lamparter <chunkeey@gmail.com> Acked-by:
Kalle Valo <kvalo@kernel.org> Signed-off-by:
-
Jakub Kicinski authored
GCC 12 really doesn't like partial struct allocations: drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:2202:32: warning: array subscript ‘struct brcmf_ext_join_params_le[0]’ is partly outside array bounds of ‘void[70]’ [-Warray-bounds] 2202 | ext_join_params->scan_le.passive_time = | ^~ brcmfmac is trying to save 2 bytes at the end by either allocating or not allocating a channel member. Let's keep @join_params_size the "right" size but kmalloc() the full structure. Acked-by: -
Jakub Kicinski authored
GCC 12 says: drivers/net/wireless/intel/iwlwifi/mvm/sta.c:1076:37: warning: array subscript -1 is below array bounds of ‘struct iwl_mvm_tid_data[9]’ [-Warray-bounds] 1076 | if (mvmsta->tid_data[tid].state != IWL_AGG_OFF) | ~~~~~~~~~~~~~~~~^~~~~ Whatever, tid is a bit from for_each_set_bit(), it's clearly unsigned. Acked-by: -
Jakub Kicinski authored
For some reason GCC 12 decided to complain about the common pattern of queuing an object onto a list on the stack in ath6k: inlined from ‘ath6kl_htc_mbox_tx’ at drivers/net/wireless/ath/ath6kl/htc_mbox.c:1142:3: include/linux/list.h:74:19: warning: storing the address of local variable ‘queue’ in ‘*&packet_15(D)->list.prev’ [-Wdangling-pointer=] 74 | new->prev = prev; | ~~~~~~~~~~^~~~~~ Move the warning to W=1, hopefully it goes away with a compiler update. Acked-by: -
Jakub Kicinski authored
The .value is a two-dim array, not a pointer. struct iqk_matrix_regs { bool iqk_done; long value[1][IQK_MATRIX_REG_NUM]; }; Acked-by: -
Jakub Kicinski authored
GCC 12 says: drivers/net/wireless/ath/ath9k/mac.c: In function ‘ath9k_hw_resettxqueue’: drivers/net/wireless/ath/ath9k/mac.c:373:22: warning: array subscript 32 is above array bounds of ‘struct ath9k_tx_queue_info[10]’ [-Warray-bounds] 373 | qi = &ah->txq[q]; | ~~~~~~~^~~ I don't know where it got the 32 from, relegate the warning to W=1+. Acked-by: -
Jakub Kicinski authored
GCC is upset that we check the return value of plfxlc_usb_dev() even tho it can't be NULL: drivers/net/wireless/purelifi/plfxlc/usb.c: In function ‘resume’: drivers/net/wireless/purelifi/plfxlc/usb.c:840:20: warning: the comparison will always evaluate as ‘true’ for the address of ‘dev’ will never be NULL [-Waddress] 840 | if (!pl || !plfxlc_usb_dev(pl)) | ^ plfxlc_usb_dev() returns an address of one of the members of pl, so it's safe to drop these checks. Acked-by:
-
- 22 May, 2022 27 commits
-
-
Nobuhiro Iwamatsu authored
The clock for this driver switched to the common clock controller driver. Therefore, update common clock properties for ethernet device in the binding document. Signed-off-by:
Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Tom Rix authored
cppcheck reports [drivers/net/fddi/skfp/smt.c:750]: (warning) printf format string requires 0 parameters but 2 are given. DB_SBAN is a vararg macro, like DB_ESSN. Remove the extra args and the nl. Signed-off-by:
Tom Rix <trix@redhat.com> Signed-off-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== introduce mt7986 ethernet support Add support for mt7986-eth driver available on mt7986 soc. Changes since v2: - rely on GFP_KERNEL whenever possible - define mtk_reg_map struct to introduce soc register map and avoid macros - improve comments Changes since v1: - drop SRAM option - convert ring->dma to void - convert scratch_ring to void - enable port4 - fix irq dts bindings - drop gmac1 support from mt7986a-rfb dts for the moment ==================== Acked-by:
-
Lorenzo Bianconi authored
Add support for mt7986-eth driver available on mt7986 soc. Tested-by:
Sam Shih <sam.shih@mediatek.com> Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
-
Lorenzo Bianconi authored
Simplify the code converting scratch_ring pointer to void Signed-off-by:
-
Lorenzo Bianconi authored
Simplify the code converting {tx,rx} ring dma pointer to void Signed-off-by: -
Lorenzo Bianconi authored
Introduce MTK_NETSYS_V2 support. MTK_NETSYS_V2 defines 32B TX/RX DMA descriptors. This is a preliminary patch to add mt7986 ethernet support. Tested-by:
-
Lorenzo Bianconi authored
Introduce reg_map structure to add the capability to support different register definitions. Move register definitions in mtk_regmap structure. This is a preliminary patch to introduce mt7986 ethernet support. Tested-by:
-
Lorenzo Bianconi authored
Remove mtk_rx_dma structure layout dependency in mtk_rx_alloc/mtk_rx_clean. Initialize to 0 rxd3 and rxd4 in mtk_rx_alloc. This is a preliminary patch to add mt7986 ethernet support. Tested-by:
-
Lorenzo Bianconi authored
This is a preliminary to ad mt7986 ethernet support. Tested-by:
-
Lorenzo Bianconi authored
Similar to tx counterpart, introduce rxd_size in mtk_soc_data data structure. This is a preliminary patch to add mt7986 ethernet support. Tested-by:
-
Lorenzo Bianconi authored
This is a preliminary patch to add mt7986 ethernet support. Tested-by:
-
Lorenzo Bianconi authored
This is a preliminary patch to add mt7986 ethernet support. Tested-by:
-
Lorenzo Bianconi authored
This is a preliminary patch to add mt7986 ethernet support. Tested-by:
-
Lorenzo Bianconi authored
In order to remove mtk_tx_dma size dependency, introduce txd_size in mtk_soc_data data structure. Rely on txd_size in mtk_init_fq_dma() and mtk_dma_free() routines. This is a preliminary patch to add mt7986 ethernet support. Tested-by:
-
Lorenzo Bianconi authored
Move tx dma descriptor configuration in mtk_tx_set_dma_desc routine. This is a preliminary patch to introduce mt7986 ethernet support since it relies on a different tx dma descriptor layout. Tested-by:
-
Lorenzo Bianconi authored
Rely on GFP_KERNEL for dma descriptors mappings in mtk_tx_alloc(), mtk_rx_alloc() and mtk_init_fq_dma() since they are run in non-irq context. Signed-off-by:
-
Lorenzo Bianconi authored
Introduce dts bindings for mt7986 soc in mediatek,net.yaml. Reviewed-by:
-
Lorenzo Bianconi authored
Introduce ethernet nodes in mt7986 bindings in order to enable mt7986a/mt7986b ethernet support. Co-developed-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== eth: silence the GCC 12 array-bounds warnings Silence the array-bounds warnings in Ethernet drivers. v2 uses -Wno-array-bounds directly. ==================== Signed-off-by: -
Jakub Kicinski authored
GCC 12 currently generates a rather inconsistent warning: drivers/net/ethernet/broadcom/tg3.c:17795:51: warning: array subscript 5 is above array bounds of ‘struct tg3_napi[5]’ [-Warray-bounds] 17795 | struct tg3_napi *tnapi = &tp->napi[i]; | ~~~~~~~~^~~ i is guaranteed < tp->irq_max which in turn is either 1 or 5. There are more loops like this one in the driver, but strangely GCC 12 dislikes only this single one. Silence this silliness for now. Signed-off-by: -
Jakub Kicinski authored
GCC 12 gets upset because driver allocates partial struct ice_aqc_sw_rules_elem buffers. The writes are within bounds. Silence these warnings for now, our build bot runs GCC 12 so we won't allow any new instances. Signed-off-by:
-
Jakub Kicinski authored
GCC 12 gets upset because in mtk_foe_entry_commit_subflow() this driver allocates a partial structure. The writes are within bounds. Silence these warnings for now, our build bot runs GCC 12 so we won't allow any new instances. Signed-off-by:
-
Vladimir Oltean authored
The "ok" tc action is useful when placed in front of a more generic filter to exclude some more specific rules from matching it. The ocelot switches can offload this tc action by creating an empty action vector (no _ENA fields set to 1). This makes sense for all of VCAP IS1, IS2 and ES0 (but not for PSFP). Add support for this action. Note that this makes the gact_drop_and_ok_test() selftest pass, where "action ok" is used in front of an "action drop" rule, both offloaded to VCAP IS2. Signed-off-by:
-
David S. Miller authored
Vladimir Oltean says: ==================== Streamline Ocelot tc-chains selftest This series changes the output and the argument format of the Ocelot switch selftest so that it is more similar to what can be found in tools/testing/selftests/net/forwarding/. ==================== Signed-off-by: -
Vladimir Oltean authored
Use the standard interface order h1, swp1, swp2, h2 that is used by the forwarding selftest framework. The previous order was confusing even with the ASCII drawing. That isn't needed anymore. This also drops the fixed MAC addresses and uses STABLE_MAC_ADDRS, which ensures the MAC addresses are unique. Signed-off-by:
-
Vladimir Oltean authored
This is a robotic rename as follows: eth0 -> swp1 eth1 -> swp2 eth2 -> h2 eth3 -> h1 This brings the selftest more in line with the other forwarding selftests, where h1 is connected to swp1, and h2 to swp2. Signed-off-by:
-
