On big systems with lots of memory, don't print out too much during
bootup, and make it easy to find if it is continuous.

on 256G 8 sockets system will get
 [ffffe20000000000-ffffe20002bfffff] PMD -> [ffff810001400000-ffff810003ffffff] on node 0
[ffffe2001c700000-ffffe2001c7fffff] potential offnode page_structs
 [ffffe20002c00000-ffffe2001c7fffff] PMD -> [ffff81000c000000-ffff8100255fffff] on node 0
[ffffe20038700000-ffffe200387fffff] potential offnode page_structs
 [ffffe2001c800000-ffffe200387fffff] PMD -> [ffff810820200000-ffff81083c1fffff] on node 1
 [ffffe20040000000-ffffe2007fffffff] PUD ->ffff811027a00000 on node 2
 [ffffe20038800000-ffffe2003fffffff] PMD -> [ffff811020200000-ffff8110279fffff] on node 2
[ffffe20054700000-ffffe200547fffff] potential offnode page_structs
 [ffffe20040000000-ffffe200547fffff] PMD -> [ffff811027c00000-ffff81103c3fffff] on node 2
[ffffe20070700000-ffffe200707fffff] potential offnode page_structs
 [ffffe20054800000-ffffe200707fffff] PMD -> [ffff811820200000-ffff81183c1fffff] on node 3
 [ffffe20080000000-ffffe200bfffffff] PUD ->ffff81202fa00000 on node 4
 [ffffe20070800000-ffffe2007fffffff] PMD -> [ffff812020200000-ffff81202f9fffff] on node 4
[ffffe2008c700000-ffffe2008c7fffff] potential offnode page_structs
 [ffffe20080000000-ffffe2008c7fffff] PMD -> [ffff81202fc00000-ffff81203c3fffff] on node 4
[ffffe200a8700000-ffffe200a87fffff] potential offnode page_structs
 [ffffe2008c800000-ffffe200a87fffff] PMD -> [ffff812820200000-ffff81283c1fffff] on node 5
 [ffffe200c0000000-ffffe200ffffffff] PUD ->ffff813037a00000 on node 6
 [ffffe200a8800000-ffffe200bfffffff] PMD -> [ffff813020200000-ffff8130379fffff] on node 6
[ffffe200c4700000-ffffe200c47fffff] potential offnode page_structs
 [ffffe200c0000000-ffffe200c47fffff] PMD -> [ffff813037c00000-ffff81303c3fffff] on node 6
 [ffffe200c4800000-ffffe200e07fffff] PMD -> [ffff813820200000-ffff81383c1fffff] on node 7

instead of a very long print out...
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

typical case: four sockets system, every node has 4g ram, and we are using:

	memmap=10g$4g

to mask out memory on node1 and node2

when numa is enabled, early_node_mem is used to get node_data and node_bootmap.

if it can not get memory from the same node with find_e820_area(), it will
use alloc_bootmem to get buff from previous nodes.

so check it and print out some info about it.

need to move early_res_to_bootmem into every setup_node_bootmem.
and it takes range that node has. otherwise alloc_bootmem could return addr
that reserved early.

depends on "mm: make reserve_bootmem can crossed the nodes".
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

"mm: make reserve_bootmem can crossed the nodes" provides new
reserve_bootmem(), let reserve_bootmem_generic() use that.

reserve_bootmem_generic() is used to reserve initramdisk, so this way
we can make sure even when bootloader or kexec load ranges cross the
node memory boundaries, reserve_bootmem still works.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

split reserve_bootmem_core() into two functions, one which checks
conflicts, and one which sets the bits.

and make reserve_bootmem to loop bdata_list to cross the nodes.

user could be crashkernel and ramdisk..., in case the range provided
by those externalities crosses the nodes.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

need offset alignment when node_boot_start's alignment is less than
the alignment required.

use local node_boot_start to match alignment - so don't add extra operation
in search loop.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Make the nodes other than node 0 use bdata->last_success for fast
search too.

We need to use __alloc_bootmem_core() for vmemmap allocation for other
nodes when numa and sparsemem/vmemmap are enabled.

Also, make fail_block path increase i with incr only after ALIGN
to avoid extra increase when size is larger than align.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

vmemmap allocation currently has this layout:

 [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001400000 on node 0
 [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001800000 on node 0
 [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001c00000 on node 0
 [ffffe20000600000-ffffe200007fffff] PMD ->ffff810002000000 on node 0
 [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002400000 on node 0
...

note that there is a 2M hole between them - not optimal.

the root cause is that usemap (24 bytes) will be allocated after every 2M
mem_map, and it will push next vmemmap (2M) to the next (2M) alignment.

solution: try to allocate the mem_map continously.

after the patch, we get:

 [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001400000 on node 0
 [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
 [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001800000 on node 0
 [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001a00000 on node 0
 [ffffe20000800000-ffffe200009fffff] PMD ->ffff810001c00000 on node 0
...

which is the ideal layout.

and usemap will share a page because of they are allocated continuously too:

sparse_early_usemap_alloc: usemap = ffff810024e00000 size = 24
sparse_early_usemap_alloc: usemap = ffff810024e00080 size = 24
sparse_early_usemap_alloc: usemap = ffff810024e00100 size = 24
sparse_early_usemap_alloc: usemap = ffff810024e00180 size = 24
...

so we make the bootmem allocation more compact and use less memory
for usemap => mission accomplished ;-)
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-bigbox-bootparam

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-bigbox-bootparam:
  x86, boot: Document for linked list of struct setup_data
  x86, boot: export linked list of struct setup_data via debugfs
  x86, boot: add linked list of struct setup_data
  x86, boot: add free_early to early reservation machanism

Documentation for linked list of struct setup_data.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Export linked list of struct setup_data via debugfs.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

This patch adds a field of 64-bit physical pointer to NULL terminated
single linked list of struct setup_data to real-mode kernel
header. This is used as a more extensible boot parameters passing
mechanism.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Add free_early to early reservation mechanism - this way early bootup
failure paths can stop wasting memory.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

disable /dev/mem mmap of RAM with PAT. It makes things safer and
eliminates aliasing. A future improvement would be to avoid the
range_is_allowed duplication.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-fixes:
  x86 PAT: decouple from nonpromisc devmem
  x86 PAT: tone down debugging messages

* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb:
  V4L/DVB (7751): ir-kbd-i2c: Save a temporary memory allocation in ir_probe
  V4L/DVB (7750): au0828/ cleanups and fixes
  V4L/DVB (7748): tuner-core: some adjustments at tuner logs, if debug enabled
  V4L/DVB (7746): pvrusb2: make signed one-bit bitfields unsigned
  V4L/DVB (7744): pvrusb2-dvb: add atsc/qam support for Hauppauge pvrusb2 model 751xx
  V4L/DVB (7742): cx88: Add support for the DViCO FusionHDTV_7_GOLD digital modes
  V4L/DVB (7741): s5h1411: Adding support for this ATSC/QAM demodulator
  V4L/DVB (7740): tuner-xc2028.c dubious !x & y
  V4L/DVB (7739): mt312.h: dubious one-bit signed bitfield
  V4L/DVB (7735): Fix compilation for au0828
  V4L/DVB (7734): em28xx: copy and paste error in em28xx_init_isoc
  V4L/DVB (7733): blackbird_find_mailbox negative return ignored in blackbird_initialize_codec()
  V4L/DVB (7732): vivi: fix a warning

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-optimized-inlining

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-optimized-inlining:
  generic: make optimized inlining arch-opt-in
  x86: add optimized inlining

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (61 commits)
  ide: sanitize handling of IDE_HFLAG_NO_SET_MODE host flag
  sis5513: fail early for unsupported chipsets
  it821x: fix kzalloc() failure handling
  qd65xx: use IDE_HFLAG_SINGLE host flag
  qd65xx: always use ->selectproc method
  ide-cd: put proc-related functions together under single ifdef
  ide-cd: Replace __FUNCTION__ with __func__
  IDE: Coding Style fixes to drivers/ide/ide-cd.c
  IDE: Coding Style fixes to drivers/ide/pci/cy82c693.c
  IDE: Coding Style fixes to drivers/ide/pci/it8213.c
  IDE: Coding Style fixes to drivers/ide/ide-floppy.c
  IDE: Coding Style fixes to drivers/ide/legacy/ali14xx.c
  IDE: Coding Style fixes to drivers/ide/legacy/hd.c
  IDE: Coding Style fixes to drivers/ide/pci/cmd640.c
  IDE: Coding Style fixes to drivers/ide/pci/opti621.c
  IDE: Coding Style fixes to drivers/ide/ide-pnp.c
  IDE: Coding Style fixes to drivers/ide/ide-proc.c
  IDE: Coding Style fixes to drivers/ide/legacy/ide-4drives.c
  IDE: Coding Style fixes to drivers/ide/legacy/umc8672.c
  IDE: Coding Style fixes to drivers/ide/pci/generic.c
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-misc: (28 commits)
  x86: section mismatch fixes, #3
  x86: section mismatch fixes, #2
  x86: pgtable_32.h - prototype and section mismatch fixes
  x86: unlock_ExtINT_logic() - fix section mismatch warnings
  x86: uniq_ioapic_id - fix section mismatch warning
  x86: trampoline_32.S - switch to .cpuinit.data
  x86: use get_bios_ebda()
  x86: remove duplicate get_bios_ebda() from rio.h
  x86: get_bios_ebda() requires asm/io.h
  x86: use cpumask function for present, possible, and online cpus
  x86: cleanup div_sc() usage
  x86: cleanup clocksource_hz2mult usage
  x86: remove unnecessary memset and NULL check after alloc_bootmem()
  x86: use bitmap library for pin_programmed
  x86: use MP_intsrc_info()
  x86: use BUILD_BUG_ON() for the size of struct intel_mp_floating
  x86_64 ia32 ptrace: convert to compat_arch_ptrace
  x86_64 ia32 ptrace: use compat_ptrace_request for siginfo
  x86 signals: lift set_fs
  x86 signals: lift flags diddling code
  ...

Linus pointed it out that PAT should not depend on NONPROMISC_DEVMEM.

Also make PAT non-default.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'agp-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6:
  agp: convert drivers/char/agp/frontend.c to use unlocked_ioctl
  agp: fix shadowed variable warning in amd-k7-agp.c

* 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm: _end is shadowing real _end, just rename it.
  drm/vbl rework: rework how the drm deals with vblank.
  drm: reorganise minor number handling using backported modesetting code.
  drm/i915: Handle tiled buffers in vblank tasklet
  drm/i965: On I965, use correct 3DSTATE_DRAWING_RECTANGLE command in vblank
  drm: Remove unneeded dma sync in ATI pcigart alloc
  drm: Fix mismerge of non-coherent DMA patch

	Arrgghhh...

Sorry about that, I'd been sure I'd folded that one, but it actually got
lost.  Please apply - that breaks execve().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Stephen Rothwell reported that linux-next did not build on powerpc64.

make optimized inlining dependent on architecture opt-in.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

add CONFIG_OPTIMIZE_INLINING=y.

allow gcc to optimize the kernel image's size by uninlining
functions that have been marked 'inline'. Previously gcc was
forced by Linux to always-inline these functions via a gcc
attribute:

 #define inline	inline __attribute__((always_inline))

Especially when the user has already selected
CONFIG_OPTIMIZE_FOR_SIZE=y this can make a huge difference in
kernel image size (using a standard Fedora .config):

   text    data     bss     dec           hex filename
   5613924  562708 3854336 10030968    990f78 vmlinux.before
   5486689  562708 3854336  9903733    971e75 vmlinux.after

that's a 2.3% text size reduction (!).
Signed-off-by: Ingo Molnar <mingo@elte.hu>

* Check for IDE_HFLAG_NO_SET_MODE host flag in ide_set_pio(),
  ide_set_[pio,dma]_mode(), ide_set_xfer_rate() and set_pio_mode().

* Remove no longer needed IDE_HFLAG_NO_SET_MODE host flag checking
  from ide_tune_dma().

* Remove superfluous ->set_pio_mode checking from do_special().

This is a part of preparations for adding 'struct ide_port_ops'.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Factor out chipset family detection from init_chipset_sis5513()
  to sis_find_family().

* Use sis_find_family() in sis5513_init_one() to fail early if the
  chipset is unsupported.

* Keep a local copy sis5513_chipset in sis5513_init_one()
  and set .udma_mask according to chipset family.

* Remove no longer need ->ultra_mask setting from init_hwif_sis5513().
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Allocate 'struct it821x_dev' objects for both ports in it821x_init_one().

Fixes potential OOPS in it821x_quirkproc() (uses 'itdev' unconditionally)
and other problems ('itdev' is needed for correct operation of the driver).
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Set IDE_HFLAG_SINGLE host flag in qd_probe() for QD6500 and QD6580
  with the second port disabled.

* Check for IDE_HFLAG_SINGLE in qd6580_port_init_devs() instead of
  using cached value of QD6580 Control register.

* Don't cache QD6580 Control register value in hwif->config_data
  (bits 8-15) and remove no longer needed QD_CONTROL() macro.

* Cache QD65xx base address in hwif->config_data (bits 8-15)
  instead of hwif->select_data.

* Set hwif->config_data in qd_probe() and remove qd_setup() helper.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

qd_select() checks itself whether timings should be reprogrammed so
remove superfluous qd_timing_ok() and always use ->selectproc method
(rename qd_select() to qd65xx_select() while at it).
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

[bart: ported it over Paolo's patch]
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

[bart: md5sum checked]
Signed-off-by: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Before:
total: 43 errors, 66 warnings, 2183 lines checked

After:
total: 0 errors, 36 warnings, 2192 lines checked

I didn't (and I don't plan to) fix the warnings:
WARNING: line over 80 characters

[bart: minor fixes, md5sum checked (modulo s/"ignore = NULL;"/"ignore;"/ fix)]
Signed-off-by: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Before:
total: 34 errors, 14 warnings, 456 lines checked

After:
total: 0 errors, 8 warnings, 456 lines checked

[bart: md5sum checked]
Signed-off-by: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

File is now error free, only a few
WARNING: line over 80 characters
are left.

Compile tested.

[bart: md5sum checked]
Signed-off-by: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

File is now error free.
Compile tested.

[bart: minor fixes, md5sum checked]
Signed-off-by: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

File is now error free, 2 warnings left.
Compile tested.

[bart: md5sum checked]
Signed-off-by: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Fix a lot of errors and warnings.
Compile tested.

[bart: some fixes, md5sum checked]
Signed-off-by: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Fix all the errors and a few warnings.
Compile tested.

[bart: some fixes, md5sum checked]
Signed-off-by: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Compile tested.

[bart: some fixes, md5sum checked]
Signed-off-by: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

File is now error free.
Compile tested.

[bart: md5sum checked]
Signed-off-by: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>