- 29 Jan, 2015 40 commits
-
-
Michal Hocko authored
commit 45f87de5 upstream. Commit 2457aec6 ("mm: non-atomically mark page accessed during page cache allocation where possible") has added a separate parameter for specifying gfp mask for radix tree allocations. Not only this is less than optimal from the API point of view because it is error prone, it is also buggy currently because grab_cache_page_write_begin is using GFP_KERNEL for radix tree and if fgp_flags doesn't contain FGP_NOFS (mostly controlled by fs by AOP_FLAG_NOFS flag) but the mapping_gfp_mask has __GFP_FS cleared then the radix tree allocation wouldn't obey the restriction and might recurse into filesystem and cause deadlocks. This is the case for most filesystems unfortunately because only ext4 and gfs2 are using AOP_FLAG_NOFS. Let's simply remove radix_gfp_mask parameter because the allocation context is same for both page cache and for the radix tree. Just make sure that the radix tree gets only the sane subset of the mask (e.g. do not pass __GFP_WRITE). Long term it is more preferable to convert remaining users of AOP_FLAG_NOFS to use mapping_gfp_mask instead and simplify this interface even further. Reported-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
Michal Hocko <mhocko@suse.cz> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Jiri Slaby <jslaby@suse.cz>
-
Sjoerd Simons authored
[Not needed in newer kernels due to refactoring fixing this issue.] With 3.14.29 (and older kernels) some of my I.mx6 Sabrelite boards were crashing with the following oops: sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode mmc0: no vqmmc regulator found mmc0: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.14.29 #1 task: c08a7120 ti: c089c000 task.ti: c089c000 PC is at wake_up_process+0x8/0x40 LR is at sdhci_irq+0x748/0x9c4 Full boot log can be found at: http://storage.kernelci.org/stable/v3.14.29/arm-multi_v7_defconfig/lab-collabora/boot-imx6q-sabrelite.html This happens if the sdhci interrupt status contains SDHCI_INT_CARD_INT, while the sdio irq was never setup. This patch fixes that in a minimal way by checking if the sdio irq was setup. In more recent kernels this bug went away due to refactoring done by Russel King. So an alternative (potentially better?) fix for this patch is to cherrypick the following patches from a recent kernel: 18258f72 - genirq: Provide synchronize_hardirq() bf3b5ec6 - mmc: sdio_irq: rework sdio irq handling 41005003 - mmc: sdhci: clean up interrupt handling 781e989c - mmc: sdhci: convert to new SDIO IRQ handling Signed-off-by:
Sjoerd Simons <sjoerd.simons@collabora.co.uk> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tyler Baker <tyler.baker@linaro.org> Signed-off-by:
-
Mathias Krause authored
commit 3e14dcf7 upstream. Commit 5d26a105 ("crypto: prefix module autoloading with "crypto-"") changed the automatic module loading when requesting crypto algorithms to prefix all module requests with "crypto-". This requires all crypto modules to have a crypto specific module alias even if their file name would otherwise match the requested crypto algorithm. Even though commit 5d26a105 added those aliases for a vast amount of modules, it was missing a few. Add the required MODULE_ALIAS_CRYPTO annotations to those files to make them get loaded automatically, again. This fixes, e.g., requesting 'ecb(blowfish-generic)', which used to work with kernels v3.18 and below. Also change MODULE_ALIAS() lines to MODULE_ALIAS_CRYPTO(). The former won't work for crypto modules any more. Fixes: 5d26a105 ("crypto: prefix module autoloading with "crypto-"") Cc: Kees Cook <keescook@chromium.org> Signed-off-by:
Mathias Krause <minipli@googlemail.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Kees Cook authored
commit 4943ba16 upstream. This adds the module loading prefix "crypto-" to the template lookup as well. For example, attempting to load 'vfat(blowfish)' via AF_ALG now correctly includes the "crypto-" prefix at every level, correctly rejecting "vfat": net-pf-38 algif-hash crypto-vfat(blowfish) crypto-vfat(blowfish)-all crypto-vfat Reported-by:
Kees Cook <keescook@chromium.org> Acked-by:
-
Kees Cook authored
commit 5d26a105 upstream. This prefixes all crypto module loading with "crypto-" so we never run the risk of exposing module auto-loading to userspace via a crypto API, as demonstrated by Mathias Krause: https://lkml.org/lkml/2013/3/4/70Signed-off-by:
-
Lars Ellenberg authored
commit 3b9d35d7 upstream. This was not noticed for many years. Affects operation if md raid is used a backing device for DRBD. CC: stable@kernel.org # v3.2+ Signed-off-by:
Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by:
Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Dan Carpenter authored
commit 3b05ac38 upstream. The app_tcp_pkt_out() function expects "*diff" to be set and ends up using uninitialized data if CONFIG_IP_VS_IPV6 is turned on. The same issue is there in app_tcp_pkt_in(). Thanks to Julian Anastasov for noticing that. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
-
Sasha Levin authored
commit a3a87844 upstream. When a key is being garbage collected, it's key->user would get put before the ->destroy() callback is called, where the key is removed from it's respective tracking structures. This leaves a key hanging in a semi-invalid state which leaves a window open for a different task to try an access key->user. An example is find_keyring_by_name() which would dereference key->user for a key that is in the process of being garbage collected (where key->user was freed but ->destroy() wasn't called yet - so it's still present in the linked list). This would cause either a panic, or corrupt memory. Fixes CVE-2014-9529. Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Andy Shevchenko authored
commit 4aaa7187 upstream. DMA mapped IO should be unmapped on the error path in probe() and unconditionally on remove(). Fixes: 62936009 ([libata] Add 460EX on-chip SATA driver, sata_dwc_460ex) Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Andy Lutomirski authored
commit 7ddc6a21 upstream. These functions can be executed on the int3 stack, so kprobes are dangerous. Tracing is probably a bad idea, too. Fixes: b645af2d ("x86_64, traps: Rework bad_iret") Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/50e33d26adca60816f3ba968875801652507d0c4.1416870125.git.luto@amacapital.netSigned-off-by:
Ingo Molnar <mingo@kernel.org> [bwh: Backported to 3.10: - Use __kprobes instead of NOKPROBE_SYMBOL() - Adjust context] Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Bryan O'Donoghue authored
commit 38a1dfda upstream. Commit 0dbc6078 ('x86, build, pci: Fix PCI_MSI build on !SMP') introduced the dependency that X86_UP_APIC is only available when PCI_MSI is false. This effectively prevents PCI_MSI support on 32bit UP systems because it disables both APIC and IO-APIC. But APIC support is architecturally required for PCI_MSI. The intention of the patch was to enforce APIC support when PCI_MSI is enabled, but failed to do so. Remove the !PCI_MSI dependency from X86_UP_APIC and enforce X86_UP_APIC when PCI_MSI support is enabled on 32bit UP systems. [ tglx: Massaged changelog ] Fixes 0dbc6078 'x86, build, pci: Fix PCI_MSI build on !SMP' Signed-off-by:
Bryan O'Donoghue <pure.logic@nexus-software.ie> Suggested-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: http://lkml.kernel.org/r/1421967529-9037-1-git-send-email-pure.logic@nexus-software.ieSigned-off-by:
-
Andy Lutomirski authored
commit 3669ef9f upstream. The Witcher 2 did something like this to allocate a TLS segment index: struct user_desc u_info; bzero(&u_info, sizeof(u_info)); u_info.entry_number = (uint32_t)-1; syscall(SYS_set_thread_area, &u_info); Strictly speaking, this code was never correct. It should have set read_exec_only and seg_not_present to 1 to indicate that it wanted to find a free slot without putting anything there, or it should have put something sensible in the TLS slot if it wanted to allocate a TLS entry for real. The actual effect of this code was to allocate a bogus segment that could be used to exploit espfix. The set_thread_area hardening patches changed the behavior, causing set_thread_area to return -EINVAL and crashing the game. This changes set_thread_area to interpret this as a request to find a free slot and to leave it empty, which isn't *quite* what the game expects but should be close enough to keep it working. In particular, using the code above to allocate two segments will allocate the same segment both times. According to FrostbittenKing on Github, this fixes The Witcher 2. If this somehow still causes problems, we could instead allocate a limit==0 32-bit data segment, but that seems rather ugly to me. Fixes: 41bdc785 x86/tls: Validate TLS entries to protect espfix Signed-off-by:
-
Andy Lutomirski authored
commit e30ab185 upstream. 32-bit programs don't have an lm bit in their ABI, so they can't reliably cause LDT_empty to return true without resorting to memset. They shouldn't need to do this. This should fix a longstanding, if minor, issue in all 64-bit kernels as well as a potential regression in the TLS hardening code. Fixes: 41bdc785 x86/tls: Validate TLS entries to protect espfix Signed-off-by:
-
Kees Cook authored
commit f285f4a2 upstream. On 64-bit, relocation is not required unless the load address gets changed. Without this, relocations do unexpected things when the kernel is above 4G. Reported-by:
Baoquan He <bhe@redhat.com> Signed-off-by:
Thomas D. <whissi@whissi.de> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Jan Beulich <JBeulich@suse.com> Cc: Junjie Mao <eternal.n08@gmail.com> Cc: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/20150116005146.GA4212@www.outflux.netSigned-off-by:
-
Alexandre Demers authored
commit 52045217 upstream. Many users see this message when booting without knowning that it is of no importance and that TSC calibration may have succeeded by another way. As explained by Paul Bolle in http://lkml.kernel.org/r/1348488259.1436.22.camel@x61.thuisdomein "Fast TSC calibration failed" should not be considered as an error since other calibration methods are being tried afterward. At most, those send a warning if they fail (not an error). So let's change the message from error to warning. [ tglx: Make if pr_info. It's really not important at all ] Fixes: c767a54b x86/debug: Add KERN_<LEVEL> to bare printks, convert printks to pr_<level> Signed-off-by:
Alexandre Demers <alexandre.f.demers@gmail.com> Link: http://lkml.kernel.org/r/1418106470-6906-1-git-send-email-alexandre.f.demers@gmail.comSigned-off-by:
-
K. Y. Srinivasan authored
commit 32c6590d upstream. The Hyper-V clocksource is continuous; mark it accordingly. Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Acked-by: jasowang@redhat.com Cc: gregkh@linuxfoundation.org Cc: devel@linuxdriverproject.org Cc: olaf@aepfle.de Cc: apw@canonical.com Link: http://lkml.kernel.org/r/1421108762-3331-1-git-send-email-kys@microsoft.comSigned-off-by:
-
Tobias Jakobi authored
commit 8c38d28b upstream. EXYNOS4_MCT_L_MASK is defined as 0xffffff00, so applying this bitmask produces a number outside the range 0x00 to 0xff, which always results in execution of the default switch statement. Obviously this is wrong and git history shows that the bitmask inversion was incorrectly set during a refactoring of the MCT code. Fix this by putting the inversion at the correct position again. Acked-by:
Kukjin Kim <kgene.kim@samsung.com> Reported-by:
GP Orcullo <kinsamanka@gmail.com> Reviewed-by:
Doug Anderson <dianders@chromium.org> Signed-off-by:
Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by:
-
Oliver Hartkopp authored
commit 9b1087aa upstream. When changing flags in the CAN drivers ctrlmode the provided new content has to be checked whether the bits are allowed to be changed. The bits that are to be changed are given as a bitfield in cm->mask. Therefore checking against cm->flags is wrong as the content can hold any kind of values. The iproute2 tool sets the bits in cm->mask and cm->flags depending on the detected command line options. To be robust against bogus user space applications additionally sanitize the provided flags with the provided mask. Cc: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Andrew Lunn authored
commit 38bdf45f upstream. On Armada XP, 375 and 38x the MBus window 13 has the remap capability, like windows 0 to 7. However, the mvebu-mbus driver isn't currently taking into account this special case, which means that when window 13 is actually used, the remap registers are left to 0, making the device using this MBus window unavailable. As a minimal fix for stable, don't use window 13. A full fix will follow later. Fixes: fddddb52 ("bus: introduce an Marvell EBU MBus driver") Reviewed-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Fabio Estevam authored
commit 7ecd0bde upstream. Currently PWM functionality is broken on mx25 due to the wrong assignment of the PWM "per" clock. According to Documentation/devicetree/bindings/clock/imx25-clock.txt: pwm_ipg_per 52 ,so update the pwm "per" to use 'pwm_ipg_per' instead of 'per10' clock. With this change PWM can work fine on mx25. Reported-by:
Carlos Soto <csotoalonso@gmail.com> Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
Shawn Guo <shawn.guo@linaro.org> Signed-off-by:
-
Sasha Levin authored
commit 5e5aeb43 upstream. Verify that the frequency value from userspace is valid and makes sense. Unverified values can cause overflows later on. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
-
Sasha Levin authored
commit 6ada1fc0 upstream. An unvalidated user input is multiplied by a constant, which can result in an undefined behaviour for large values. While this is validated later, we should avoid triggering undefined behaviour. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Joe Thornber authored
commit a59db676 upstream. Introduce a new variable to count the number of allocated migration structures. The existing variable cache->nr_migrations became overloaded. It was used to: i) track of the number of migrations in flight for the purposes of quiescing during suspend. ii) to estimate the amount of background IO occuring. Recent discard changes meant that REQ_DISCARD bios are processed with a migration. Discards are not background IO so nr_migrations was not incremented. However this could cause quiescing to complete early. (i) is now handled with a new variable cache->nr_allocated_migrations. cache->nr_migrations has been renamed cache->nr_io_migrations. cleanup_migration() is now called free_io_migration(), since it decrements that variable. Also, remove the unused cache->next_migration variable that got replaced with with prealloc_structs a while ago. Signed-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Joe Thornber authored
commit 9b1cc9f2 upstream. If a DM table is reloaded with an inactive table when the device is not suspended (normal procedure for LVM2), then there will be two dm-bufio objects that can diverge. This can lead to a situation where the inactive table uses bufio to read metadata at the same time the active table writes metadata -- resulting in the inactive table having stale metadata buffers once it is promoted to the active table slot. Fix this by using reference counting and a global list of cache metadata objects to ensure there is only one metadata object per metadata device. Signed-off-by:
-
Brian King authored
commit 6cdb0817 upstream. Fixes a race condition in abort handling that was injected when multiple interrupt support was added. When only a single interrupt is present, the adapter guarantees it will send responses for aborted commands prior to the response for the abort command itself. With multiple interrupts, these responses generally come back on different interrupts, so we need to ensure the abort thread waits until the aborted command is complete so we don't perform a double completion. This race condition was being hit frequently in environments which were triggering command timeouts, which was resulting in a double completion causing a kernel oops. Signed-off-by:
Brian King <brking@linux.vnet.ibm.com> Reviewed-by:
Wendy Xiong <wenxiong@linux.vnet.ibm.com> Tested-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Alex Deucher authored
commit 5615f890 upstream. This adds a quirks list to fix stability problems with certain SI boards. bug: https://bugs.freedesktop.org/show_bug.cgi?id=76490Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Chris Wilson authored
commit 226e5ae9 upstream. If CONFIG_DEBUG_MUTEXES is set, the mutex->owner field is only cleared if the mutex debugging is enabled which introduces a race in our mutex_is_locked_by() - i.e. we may inspect the old owner value before it is acquired by the new task. This is the root cause of this error: # diff --git a/kernel/locking/mutex-debug.c b/kernel/locking/mutex-debug.c # index 5cf6731..3ef3736 100644 # --- a/kernel/locking/mutex-debug.c # +++ b/kernel/locking/mutex-debug.c # @@ -80,13 +80,13 @@ void debug_mutex_unlock(struct mutex *lock) # DEBUG_LOCKS_WARN_ON(lock->owner != current); # # DEBUG_LOCKS_WARN_ON(!lock->wait_list.prev && !lock->wait_list.next); # - mutex_clear_owner(lock); # } # # /* # * __mutex_slowpath_needs_to_unlock() is explicitly 0 for debug # * mutexes so that we can do it here after we've verified state. # */ # + mutex_clear_owner(lock); # atomic_set(&lock->count, 1); # } Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=87955Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Michael Karcher authored
commit 1caf6aaa upstream. Compiling SH with gcc-4.8 fails due to the -m32 option not being supported. From http://buildd.debian-ports.org/status/fetch.php?pkg=linux&arch=sh4&ver=3.16.7-ckt4-1&stamp=1421425783 CC init/main.o gcc-4.8: error: unrecognized command line option '-m32' ld: cannot find init/.tmp_mc_main.o: No such file or directory objcopy: 'init/.tmp_mx_main.o': No such file rm: cannot remove 'init/.tmp_mx_main.o': No such file or directory rm: cannot remove 'init/.tmp_mc_main.o': No such file or directory Link: http://lkml.kernel.org/r/1421537778-29001-1-git-send-email-kernel@mkarcher.dialup.fu-berlin.de Link: http://lkml.kernel.org/r/54BCBDD4.10102@physik.fu-berlin.de Cc: Matt Fleming <matt@console-pimps.org> Reported-by:
John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by:
Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Jason Lee Cragg authored
commit 64559311 upstream. Signed-off-by:
Jason Lee Cragg <jcragg@gmail.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
David Jeffery authored
commit ce751452 upstream. It is possible for ata_sff_flush_pio_task() to set ap->hsm_task_state to HSM_ST_IDLE in between the time __ata_sff_port_intr() checks for HSM_ST_IDLE and before it calls ata_sff_hsm_move() causing ata_sff_hsm_move() to BUG(). This problem is hard to reproduce making this patch hard to verify, but this fix will prevent the race. I have not been able to reproduce the problem, but here is a crash dump from a 2.6.32 kernel. On examining the ata port's state, its hsm_task_state field has a value of HSM_ST_IDLE: crash> struct ata_port.hsm_task_state ffff881c1121c000 hsm_task_state = 0 Normally, this should not be possible as ata_sff_hsm_move() was called from ata_sff_host_intr(), which checks hsm_task_state and won't call ata_sff_hsm_move() if it has a HSM_ST_IDLE value. PID: 11053 TASK: ffff8816e846cae0 CPU: 0 COMMAND: "sshd" #0 [ffff88008ba03960] machine_kexec at ffffffff81038f3b #1 [ffff88008ba039c0] crash_kexec at ffffffff810c5d92 #2 [ffff88008ba03a90] oops_end at ffffffff8152b510 #3 [ffff88008ba03ac0] die at ffffffff81010e0b #4 [ffff88008ba03af0] do_trap at ffffffff8152ad74 #5 [ffff88008ba03b50] do_invalid_op at ffffffff8100cf95 #6 [ffff88008ba03bf0] invalid_op at ffffffff8100bf9b [exception RIP: ata_sff_hsm_move+317] RIP: ffffffff813a77ad RSP: ffff88008ba03ca0 RFLAGS: 00010097 RAX: 0000000000000000 RBX: ffff881c1121dc60 RCX: 0000000000000000 RDX: ffff881c1121dd10 RSI: ffff881c1121dc60 RDI: ffff881c1121c000 RBP: ffff88008ba03d00 R8: 0000000000000000 R9: 000000000000002e R10: 000000000001003f R11: 000000000000009b R12: ffff881c1121c000 R13: 0000000000000000 R14: 0000000000000050 R15: ffff881c1121dd78 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffff88008ba03d08] ata_sff_host_intr at ffffffff813a7fbd #8 [ffff88008ba03d38] ata_sff_interrupt at ffffffff813a821e #9 [ffff88008ba03d78] handle_IRQ_event at ffffffff810e6ec0
-
Jim Lin authored
commit db93facf upstream. This patch is to fix two deadlock cases. Deadlock 1: CPU #1 pinctrl_register-> pinctrl_get -> create_pinctrl (Holding lock pinctrl_maps_mutex) -> get_pinctrl_dev_from_devname (Trying to acquire lock pinctrldev_list_mutex) CPU #0 pinctrl_unregister (Holding lock pinctrldev_list_mutex) -> pinctrl_put ->> pinctrl_free -> pinctrl_dt_free_maps -> pinctrl_unregister_map (Trying to acquire lock pinctrl_maps_mutex) Simply to say CPU#1 is holding lock A and trying to acquire lock B, CPU#0 is holding lock B and trying to acquire lock A. Deadlock 2: CPU #3 pinctrl_register-> pinctrl_get -> create_pinctrl (Holding lock pinctrl_maps_mutex) -> get_pinctrl_dev_from_devname (Trying to acquire lock pinctrldev_list_mutex) CPU #2 pinctrl_unregister (Holding lock pctldev->mutex) -> pinctrl_put ->> pinctrl_free -> pinctrl_dt_free_maps -> pinctrl_unregister_map (Trying to acquire lock pinctrl_maps_mutex) CPU #0 tegra_gpio_request (Holding lock pinctrldev_list_mutex) -> pinctrl_get_device_gpio_range (Trying to acquire lock pctldev->mutex) Simply to say CPU#3 is holding lock A and trying to acquire lock D, CPU#2 is holding lock B and trying to acquire lock A, CPU#0 is holding lock D and trying to acquire lock B. Signed-off-by:
Jim Lin <jilin@nvidia.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Johan Hovold authored
commit 0915e6fe upstream. The gpio device attributes were never destroyed when the gpio was unexported (or on export failures). Use device_create_with_groups() to create the default device attributes of the gpio class device. Note that this also fixes the attribute-creation race with userspace for these attributes. Remove contingent attributes in export error path and on unexport. Fixes: d8f388d8 ("gpio: sysfs interface") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Johan Hovold authored
commit 121b6a79 upstream. The gpio-chip device attributes were never destroyed when the device was removed. Fix by using device_create_with_groups() to create the device attributes of the chip class device. Note that this also fixes the attribute-creation race with userspace. Fixes: d8f388d8 ("gpio: sysfs interface") Signed-off-by:
-
Jussi Kivilinna authored
commit 7d444909 upstream. Commit a710f761 (crypto: sha256_ssse3 - add sha224 support) attempted to add MODULE_ALIAS for SHA-224, but it ended up being "sha384", probably because mix-up with previous commit 340991e3 (crypto: sha512_ssse3 - add sha384 support). Patch corrects module alias to "sha224". Reported-by:
Pierre-Mayeul Badaire <pierre-mayeul.badaire@m4x.org> Signed-off-by:
Jussi Kivilinna <jussi.kivilinna@iki.fi> Signed-off-by:
-
Kent Overstreet authored
commit bcf090e0 upstream. this was very wrong - mempool_alloc() only guarantees success with GFP_WAIT. bcache uses GFP_NOWAIT in various other places where we have a fallback, circuits must've gotten crossed when writing this code or something. Signed-off-by:
Kent Overstreet <kmo@daterainc.com> Cc: Gabriel de Perthuis <g2p.code@gmail.com> Signed-off-by:
-
Sagi Grimberg authored
commit b02efbfc upstream. In situations such as bond failover, The new session establishment implicitly invokes the termination of the old connection. So, we don't want to wait for the old connection wait_conn to completely terminate before we accept the new connection and post a login response. The solution is to deffer the comp_wait completion and the conn_put to a work so wait_conn will effectively be non-blocking (flush errors are assumed to come very fast). We allocate isert_release_wq with WQ_UNBOUND and WQ_UNBOUND_MAX_ACTIVE to spread the concurrency of release works. Reported-by:
Slava Shwartsman <valyushash@gmail.com> Signed-off-by:
Sagi Grimberg <sagig@mellanox.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Sagi Grimberg authored
commit ca6c1d82 upstream. The np listener cm_id will also get ADDR_CHANGE event upcall (in case it is bound to a specific IP). Handle it correctly by creating a new cm_id and implicitly destroy the old one. Since this is the second event a listener np cm_id may encounter, we move the np cm_id event handling to a routine. Squashed: iser-target: Move cma_id setup to a function Reported-by:
-
Sagi Grimberg authored
commit 19e2090f upstream. Take isert_conn pointer from cm_id->qp->qp_context. This will allow us to know that the cm_id context is always the network portal. This will make the cm_id event check (connection or network portal) more reliable. In order to avoid a NULL dereference in cma_id->qp->qp_context we destroy the qp after we destroy the cm_id (and make the dereference safe). session stablishment/teardown sequences can happen in parallel, we should take into account that connected_handler might race with connection teardown flow. Also, protect isert_conn->conn_device->active_qps decrement within the error patch during QP creation failure and the normal teardown path in isert_connect_release(). Squashed: iser-target: Decrement completion context active_qps in error flow Signed-off-by:
-
Sagi Grimberg authored
commit 2371e5da upstream. There is no point in accepting a new CM request only when we are completely done with the last iscsi login. Instead we accept immediately, this will also cause the CM connection to reach connected state and the initiator is allowed to send the first login. We mark that we got the initial login and let iscsi layer pick it up when it gets there. This reduces the parallel login sequence by a factor of more then 4 (and more for multi-login) and also prevents the initiator (who does all logins in parallel) from giving up on login timeout expiration. In order to support multiple login requests sequence (CHAP) we call isert_rx_login_req from isert_rx_completion insead of letting isert_get_login_rx call it. Squashed: iser-target: Use kref_get_unless_zero in connected_handler iser-target: Acquire conn_mutex when changing connection state iser-target: Reject connect request in failure path Signed-off-by:
-
Sagi Grimberg authored
commit 128e9cc8 upstream. ISER_CONN_UP state is not sufficient to know if we should wait for completion of flush errors and disconnected_handler event. Instead, split it to 2 states: - ISER_CONN_UP: Got to CM connected phase, This state indicates that we need to wait for a CM disconnect event before going to teardown. - ISER_CONN_FULL_FEATURE: Got to full feature phase after we posted login response, This state indicates that we posted recv buffers and we need to wait for flush completions before going to teardown. Also avoid deffering disconnected handler to a work, and handle it within disconnected handler. More work here is needed to handle DEVICE_REMOVAL event correctly (cleanup all resources). Squashed: iser-target: Don't deffer disconnected handler to a work Signed-off-by:
-
