- 24 Sep, 2012 40 commits
-
-
Vikas Chaudhary authored
Remove following unused define:- QLA82XX_MINIDUMP_OCM0_SIZE QLA82XX_MINIDUMP_L1C_SIZE QLA82XX_MINIDUMP_L2C_SIZE QLA82XX_MINIDUMP_COMMON_STR_SIZE QLA82XX_MINIDUMP_FCOE_STR_SIZE QLA82XX_MINIDUMP_MEM_SIZE QLA82XX_MAX_ENTRY_HDR Added following new define to optimize code:- MIU_TA_CTL_WRITE_ENABLE MIU_TA_CTL_WRITE_START MIU_TA_CTL_START_ENABLE Signed-off-by:
Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
Vikas Chaudhary authored
Signed-off-by:
-
Vikas Chaudhary authored
ql4_8xxx_mark_entry_skipped to qla4_8xxx_mark_entry_skipped ql4_attr_is_visible to qla4_attr_is_visible Signed-off-by:
-
Vikas Chaudhary authored
Signed-off-by:
-
Vikas Chaudhary authored
Signed-off-by:
-
Martin Pitt authored
Add "removable" module parameter to set the "removable" attribute of any subsequently created debug block device. It is a writable driver option, so that you can switch between removable and "fixed" media block devices in between the add_host calls. This is useful for being able to test the different behaviour/required privileges in e. g. the udisks test suite. Signed-off-by:
Martin Pitt <martin.pitt@ubuntu.com> Acked-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
-
Vikas Chaudhary authored
Signed-off-by:
-
Vikas Chaudhary authored
Signed-off-by:
-
Vikas Chaudhary authored
while processing the stop firmware mailbox command on driver unload, a interrupt is processed which causes kernel panic as the response queue is not valid. Fix is to clear the interrupt in free_adapter call just after disabling the interrupts. Signed-off-by:
-
Vikas Chaudhary authored
Fix following lockdep warning:- INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. Pid: 298, comm: modprobe Not tainted 3.6.0-rc1+ #13 Call Trace: [<c049f5c6>] register_lock_class+0x186/0x360 [<c06e2e39>] ? __dev_printk+0x139/0x280 [<c04a288a>] __lock_acquire+0x6a/0x450 [<c04a2cf4>] lock_acquire+0x84/0xf0 [<f98bb0d0>] ? qla4xxx_post_work+0x20/0x60 [qla4xxx] [<c089a05b>] _raw_spin_lock_irqsave+0x4b/0x60 [<f98bb0d0>] ? qla4xxx_post_work+0x20/0x60 [qla4xxx] [<f98bb0d0>] qla4xxx_post_work+0x20/0x60 [qla4xxx] [<f98bb1c9>] qla4xxx_post_aen_work+0x49/0x60 [qla4xxx] [<f98c6cf2>] qla4xxx_isr_decode_mailbox+0x3f2/0x780 [qla4xxx] [<f98c8493>] qla4_83xx_interrupt_service_routine+0x33/0x50 [qla4xxx] [<f98d0e49>] qla4_83xx_process_mbox_intr+0x29/0x40 [qla4xxx] [<f98c2031>] qla4xxx_mailbox_command+0x361/0x5d0 [qla4xxx] [<c08983c8>] ? mutex_unlock+0x8/0x10 [<f98c3e86>] qla4xxx_get_ifcb+0x66/0xb0 [qla4xxx] [<f98c3ef7>] qla4xxx_update_local_ifcb+0x27/0x100 [qla4xxx] [<f98c56af>] qla4xxx_initialize_fw_cb+0x2ff/0x3b0 [qla4xxx] [<c04150d0>] ? dma_generic_free_coherent+0x30/0x30 [<f98c0f70>] qla4xxx_init_firmware+0x40/0xf0 [qla4xxx] [<f98c10b6>] qla4xxx_initialize_adapter+0x96/0x120 [qla4xxx] [<f98d35cd>] qla4xxx_probe_adapter+0x378/0x855 [qla4xxx] [<c04a1a04>] ? trace_hardirqs_on_caller+0xf4/0x180 [<c04a1a9b>] ? trace_hardirqs_on+0xb/0x10 [<c06ef403>] ? pm_runtime_enable+0x43/0x70 [<c062f042>] local_pci_probe+0x42/0xb0 [<c06300c0>] pci_device_probe+0x60/0x80 [<c06e6bb6>] really_probe+0x56/0x2e0 [<c089a5f2>] ? _raw_spin_unlock_irq+0x22/0x30 [<c06f0b02>] ? pm_runtime_barrier+0x52/0xb0 [<c06e6e77>] driver_probe_device+0x37/0x90 [<c0898281>] ? mutex_lock_nested+0x31/0x40 [<c06e6f51>] __driver_attach+0x81/0x90 [<c06e51e8>] bus_for_each_dev+0x48/0x70 [<c06e68e9>] driver_attach+0x19/0x20 [<c06e6ed0>] ? driver_probe_device+0x90/0x90 [<c06e637f>] bus_add_driver+0x18f/0x280 [<c062ff40>] ? pci_dev_put+0x20/0x20 [<c062ff40>] ? pci_dev_put+0x20/0x20 [<c06e7435>] driver_register+0x65/0x120 [<c061a3a2>] ? __raw_spin_lock_init+0x32/0x60 [<c06302f4>] __pci_register_driver+0x54/0xc0 [<f98e809e>] qla4xxx_module_init+0x9e/0xcd [qla4xxx] [<c040302f>] do_one_initcall+0x2f/0x170 [<f98e8000>] ? 0xf98e7fff [<c04ae025>] sys_init_module+0x75/0x1c0 [<c04a1a04>] ? trace_hardirqs_on_caller+0xf4/0x180 [<c0609514>] ? trace_hardirqs_on_thunk+0xc/0x10 [<c08a141f>] sysenter_do_call+0x12/0x38 Signed-off-by:
-
Dave Jiang authored
We always assign a dummy task context to a port in order to address a silicon issue. We have 4 ports per controller. So when idle, there are always exactly 4 TCs "active". The adaptive interrupt coalescing code uses number of active TCs to figure out the coalescing values. However, we never hit "0" TCs because of the 4 dummy TCs. Putting in fix so that we calculate this correctly. Reported-by:
Dan Melnic <dan@seamicro.com> Signed-off-by:
Dave Jiang <dave.jiang@intel.com> Signed-off-by:
-
Jeff Skirvin authored
This commit fixes a driver bug for SSP tasks that require task management in the target after they complete in the SCU hardware. The problem was manifested in the function "isci_task_abort_task", which tests to see if the sas_task.lldd_task is non-NULL before allowing task management; this bug would always NULL lldd_task in the SCU I/O completion path even if target management was required, which would prevent task / target manangement from happening. Note that in the case of SATA/STP targets, error recovery is provided by the libata error handler which is why SATA/STP device recovery worked correctly even though SSP handling did not. Signed-off-by:
Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by:
-
Robert Love authored
This header file is included in user space applications that are doing "FC Passthrough." This include causes them to also include scsi/scsi.h. Since this header file doesn't actually need scsi/scsi.h, remove the include line. This patch was tested with 'make allyesconfig'. Signed-off-by:
Robert Love <robert.w.love@intel.com> Tested-by:
Ross Brattain <ross.b.brattain@intel.com> Signed-off-by:
-
Moger, Babu authored
Signed-off-by:
Babu Moger <babu.moger@netapp.com> Signed-off-by:
-
Moger, Babu authored
This patch consolidates the strings together. Purpose is to remove minor product strings extensions. That way the future products with similar strings should not require change here. Signed-off-by:
-
Moger, Babu authored
This patch adds a new vendor/product strings for netapp E series product. Also consolidated the strings together with similar names. Signed-off-by:
-
Martin Peschke authored
__scsi_remove_device (e.g. due to dev_loss_tmo) calls zfcp_scsi_slave_destroy which in turn sends a close LUN FSF request to the adapter. After 30 seconds without response, zfcp_erp_timeout_handler kicks the ERP thread failing the close LUN ERP action. zfcp_erp_wait in zfcp_erp_lun_shutdown_wait and thus zfcp_scsi_slave_destroy returns and then scsi_device is no longer valid. Sometime later the response to the close LUN FSF request may finally come in. However, commit b62a8d9b "[SCSI] zfcp: Use SCSI device data zfcp_scsi_dev instead of zfcp_unit" introduced a number of attempts to unconditionally access struct zfcp_scsi_dev through struct scsi_device causing a use-after-free. This leads to an Oops due to kernel page fault in one of: zfcp_fsf_abort_fcp_command_handler, zfcp_fsf_open_lun_handler, zfcp_fsf_close_lun_handler, zfcp_fsf_req_trace, zfcp_fsf_fcp_handler_common. Move dereferencing of zfcp private data zfcp_scsi_dev allocated in scsi_device via scsi_transport_reserve_device after the check for potentially aborted FSF request and thus no longer valid scsi_device. Only then assign sdev_to_zfcp(sdev) to the local auto variable struct zfcp_scsi_dev *zfcp_sdev. Signed-off-by:
Martin Peschke <mpeschke@linux.vnet.ibm.com> Signed-off-by:
Steffen Maier <maier@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> #2.6.37+ Signed-off-by:
-
Steffen Maier authored
In FC fabrics with large zones, the automatic port_rescan on incoming ELS and any adapter recovery can cause quite some traffic at the very same time, especially if lots of Linux images share an HBA, which is common on s390. This can cause trouble and failures. Fix this by making such port rescans dependent on a user configurable module parameter. The following unconditional automatic port rescans remain as is: On setting an adapter online and on manual user-triggered writes to the sysfs attribute port_rescan. Signed-off-by:
-
Steffen Maier authored
Upstream commit f3450c7b "[SCSI] zfcp: Replace local reference counting with common kref" accidentally dropped a reference count check before tearing down zfcp_ports that are potentially in use by zfcp_units. Even remote ports in use can be removed causing unreachable garbage objects zfcp_ports with zfcp_units. Thus units won't come back even after a manual port_rescan. The kref of zfcp_port->dev.kobj is already used by the driver core. We cannot re-use it to track the number of zfcp_units. Re-introduce our own counter for units per port and check on port_remove. Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Cc: <stable@vger.kernel.org> #2.6.33+ Signed-off-by:
-
Julia Lawall authored
If list_for_each_entry, etc complete a traversal of the list, the iterator variable ends up pointing to an address at an offset from the list head, and not a meaningful structure. Thus this value should not be used after the end of the iterator. Replace port->adapter->scsi_host by adapter->scsi_host. This problem was found using Coccinelle (http://coccinelle.lip6.fr/). Oversight in upsteam commit of v2.6.37 a1ca4831 "[SCSI] zfcp: Move ACL/CFDC code to zfcp_cfdc.c" which merged the content of zfcp_erp_port_access_changed(). Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Steffen Maier authored
If the mapping of FCP device bus ID and corresponding subchannel is modified while the Linux image is suspended, the resume of FCP devices can fail. During resume, zfcp gets callbacks from cio regarding the modified subchannels but they can be arbitrarily mixed with the restore/resume callback. Since the cio callbacks would trigger adapter recovery, zfcp could wakeup before the resume callback. Therefore, ignore the cio callbacks regarding subchannels while being suspended. We can safely do so, since zfcp does not deal itself with subchannels. For problem determination purposes, we still trace the ignored callback events. The following kernel messages could be seen on resume: kernel: <WWPN>: parent <FCP device bus ID> should not be sleeping As part of adapter reopen recovery, zfcp performs auto port scanning which can erroneously try to register new remote ports with scsi_transport_fc and the device core code complains about the parent (adapter) still sleeping. kernel: zfcp.3dff9c: <FCP device bus ID>:\ Setting up the QDIO connection to the FCP adapter failed <last kernel message repeated 3 more times> kernel: zfcp.574d43: <FCP device bus ID>:\ ERP cannot recover an error on the FCP device In such cases, the adapter gave up recovery and remained blocked along with its child objects: remote ports and LUNs/scsi devices. Even the adapter shutdown as part of giving up recovery failed because the ccw device state remained disconnected. Later, the corresponding remote ports ran into dev_loss_tmo. As a result, the LUNs were erroneously not available again after resume. Even a manually triggered adapter recovery (e.g. sysfs attribute failed, or device offline/online via sysfs) could not recover the adapter due to the remaining disconnected state of the corresponding ccw device. Signed-off-by:
-
Steffen Maier authored
The pl vector has scount elements, i.e. pl[scount-1] is the last valid element. For maximum sized requests, payload->counter == scount after the last loop iteration. Therefore, do bounds checking first (with boolean shortcut) to not access the invalid element pl[scount]. Do not trust the maximum sbale->scount value from the HBA but ensure we won't access the pl vector out of our allocated bounds. While at it, clean up scoping and prevent unnecessary memset. Minor fix for 86a9668a "[SCSI] zfcp: support for hardware data router" Signed-off-by:
-
Steffen Maier authored
Duplicate fssrh_2 from a54ca0f6 "[SCSI] zfcp: Redesign of the debug tracing for HBA records." complicates distinction of generic status read response from local link up. Duplicate fsscth1 from 2c55b750 "[SCSI] zfcp: Redesign of the debug tracing for SAN records." complicates distinction of good common transport response from invalid port handle. Signed-off-by:
-
Steffen Maier authored
Commit a9277e77 "[SCSI] scsi_transport_fc: Getting FC Port Speed in sync with FC-GS" changed the semantics of FC_PORTSPEED defines to FDMI port attributes of FC-HBA/SM-HBA which is different from the previous bit reversed Report Port Speed Capabilities (RPSC) ELS of FC-GS/FC-LS. Zfcp showed "10 Gbit" instead of "4 Gbit" for supported_speeds. It now uses explicit bit conversion as the other LLDs already do, in order to be independent of the kernel bit semantics. See also http://marc.info/?l=linux-scsi&m=134452926830730&w=2Signed-off-by:
-
Andi Kleen authored
gcc 4.8 warns because the memset only clears sizeof(char *) bytes, not the whole buffer. Use the correct buffer size and clear the whole sense buffer. /backup/lsrc/git/linux-lto-2.6/drivers/scsi/bnx2fc/bnx2fc_io.c: In function 'bnx2fc_parse_fcp_rsp': /backup/lsrc/git/linux-lto-2.6/drivers/scsi/bnx2fc/bnx2fc_io.c:1810:41: warning: argument to 'sizeof' in 'memset' call is the same expression as the destination; did you mean to provide an explicit length? [-Wsizeof-pointer-memaccess] memset(sc_cmd->sense_buffer, 0, sizeof(sc_cmd->sense_buffer)); ^ Signed-off-by:Andi Kleen <ak@linux.intel.com> Acked-by:
Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by:
-
Martin K. Petersen authored
Add a parameter that allows the host protection capabilities mask to be provided at module load time. Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Acked-by:
"Sreekanth Reddy" <Sreekanth.reddy@lsi.com> Signed-off-by:
-
Martin K. Petersen authored
Only a target device should return ABORTED COMMAND when a PI error is discovered. The HBA should always set the sense key to ILLEGAL REQUEST. Signed-off-by:
-
Martin K. Petersen authored
Hitachi Ultrastar 15K300 is quirky. Disable T10 PI (DIF). Signed-off-by:
-
Martin K. Petersen authored
We have encountered a few devices that misbehaved when operating in T10 PI mode. Allow T10 PI protection type to be overridden from userland. Signed-off-by:
-
Martin K. Petersen authored
It does not make sense to translate ref tags with unexpected values. Instead we simply ignore them and let the upper layers catch the problem. Ref tags that contain the expected value are still remapped. Signed-off-by:
-
Alexey Khoroshilov authored
If state is NON_BLOCKING and mutex_trylock is succeed, the control flow goes to mutex_lock_interruptible() that is a deadlock. [jejb: fixed coding style problems] Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by:
-
Brian King authored
Bump driver version. Signed-off-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
-
Brian King authored
This fixes an issues seen where a Fabric RSCN event was received while the link was down, which resulted in repeated attempts to log back into the fabric, which then failed, resulting in the ibmvfc driver taking the host offline. Fix this by delaying taking any action regarding the fabric RSCN until the link comes back up. Signed-off-by:
-
Brian King authored
If an abort request times out to the virtual fibre channel adapter, the ibmvfc driver will kick off a reset of the adapter. This patch ensures we wait for the both the abort request and the request being aborted to be completed prior to exiting the eh_abort handler. This fixes a bug where the ibmvfc driver was erroneously returning success to the eh_abort handler then later sending back a response to the same command. Signed-off-by:
-
Fengguang Wu authored
Use kzalloc rather than kmalloc followed by memset with 0. Generated by: scripts/coccinelle/api/alloc/kzalloc-simple.cocci Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Acked-by:
Adam Radford <aradford@gmail.com> Signed-off-by:
-
Kleber Sacilotto de Souza authored
Signed-off-by:
Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com> Acked-by:
-
Krishna Gudipati authored
Signed-off-by:
Krishna Gudipati <kgudipat@brocade.com> Signed-off-by:
-
Krishna Gudipati authored
Signed-off-by:
-
Krishna Gudipati authored
- Changes to avoid discovering NPIV port as remote port by the other NPIV ports created on same physical port when all the NPIV ports are part of the same zone in a fabric. - Provided mechanism to support maximum number of target ports for a given initiator port (physical port + NPIV ports) irrespective of the way in which the initiator and target ports are zoned in the fabric. - Introduced module_parameter max_rport_logins to restrict number of remote ports discovery which includes target and initiator remote ports. Signed-off-by:
Vijaya Mohan Guvva <vmohan@brocade.com> Signed-off-by:
-
Krishna Gudipati authored
- Changes to register node symbolic name with name server on the fabric by sending CT commands RNN_ID and RSNN_NN. Signed-off-by:
-
