- 10 Jan, 2019 9 commits
-
-
Yuchung Cheng authored
Previously upon SYN timeouts the sender recomputes the txhash to try a different path. However this does not apply on the initial timeout of SYN-data (active Fast Open). Therefore an active IPv6 Fast Open connection may incur one second RTO penalty to take on a new path after the second SYN retransmission uses a new flow label. This patch removes this undesirable behavior so Fast Open changes the flow label just like the regular connections. This also helps avoid falsely disabling Fast Open on the sender which triggers after two consecutive SYN timeouts on Fast Open. Signed-off-by:
Yuchung Cheng <ycheng@google.com> Reviewed-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andrew Lunn authored
The 6390 copper ports have an errata which require poking magic values into undocumented magic registers and then performing a software reset. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Willem de Bruijn authored
A network device stack with multiple layers of bonding devices can trigger a false positive lockdep warning. Adding lockdep nest levels fixes this. Update the level on both enslave and unlink, to avoid the following series of events .. ip netns add test ip netns exec test bash ip link set dev lo addr 00:11:22:33:44:55 ip link set dev lo down ip link add dev bond1 type bond ip link add dev bond2 type bond ip link set dev lo master bond1 ip link set dev bond1 master bond2 ip link set dev bond1 nomaster ip link set dev bond2 master bond1 .. from still generating a splat: [ 193.652127] ====================================================== [ 193.658231] WARNING: possible circular locking dependency detected [ 193.664350] 4.20.0 #8 Not tainted [ 193.668310] ------------------------------------------------------ [ 193.674417] ip/15577 is trying to acquire lock: [ 193.678897] 00000000a40e3b69 (&(&bond->stats_lock)->rlock#3/3){+.+.}, at: bond_get_stats+0x58/0x290 [ 193.687851] but task is already holding lock: [ 193.693625] 00000000807b9d9f (&(&bond->stats_lock)->rlock#2/2){+.+.}, at: bond_get_stats+0x58/0x290 [..] [ 193.851092] lock_acquire+0xa7/0x190 [ 193.855138] _raw_spin_lock_nested+0x2d/0x40 [ 193.859878] bond_get_stats+0x58/0x290 [ 193.864093] dev_get_stats+0x5a/0xc0 [ 193.868140] bond_get_stats+0x105/0x290 [ 193.872444] dev_get_stats+0x5a/0xc0 [ 193.876493] rtnl_fill_stats+0x40/0x130 [ 193.880797] rtnl_fill_ifinfo+0x6c5/0xdc0 [ 193.885271] rtmsg_ifinfo_build_skb+0x86/0xe0 [ 193.890091] rtnetlink_event+0x5b/0xa0 [ 193.894320] raw_notifier_call_chain+0x43/0x60 [ 193.899225] netdev_change_features+0x50/0xa0 [ 193.904044] bond_compute_features.isra.46+0x1ab/0x270 [ 193.909640] bond_enslave+0x141d/0x15b0 [ 193.913946] do_set_master+0x89/0xa0 [ 193.918016] do_setlink+0x37c/0xda0 [ 193.921980] __rtnl_newlink+0x499/0x890 [ 193.926281] rtnl_newlink+0x48/0x70 [ 193.930238] rtnetlink_rcv_msg+0x171/0x4b0 [ 193.934801] netlink_rcv_skb+0xd1/0x110 [ 193.939103] rtnetlink_rcv+0x15/0x20 [ 193.943151] netlink_unicast+0x3b5/0x520 [ 193.947544] netlink_sendmsg+0x2fd/0x3f0 [ 193.951942] sock_sendmsg+0x38/0x50 [ 193.955899] ___sys_sendmsg+0x2ba/0x2d0 [ 193.960205] __x64_sys_sendmsg+0xad/0x100 [ 193.964687] do_syscall_64+0x5a/0x460 [ 193.968823] entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 7e2556e4 ("bonding: avoid lockdep confusion in bond_get_stats()") Reported-by:syzbot <syzkaller@googlegroups.com> Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Eric Dumazet authored
This patch makes sure the flow label in the IPv6 header forged in ipv6_local_error() is initialized. BUG: KMSAN: kernel-infoleak in _copy_to_user+0x16b/0x1f0 lib/usercopy.c:32 CPU: 1 PID: 24675 Comm: syz-executor1 Not tainted 4.20.0-rc7+ #4 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x173/0x1d0 lib/dump_stack.c:113 kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:613 kmsan_internal_check_memory+0x455/0xb00 mm/kmsan/kmsan.c:675 kmsan_copy_to_user+0xab/0xc0 mm/kmsan/kmsan_hooks.c:601 _copy_to_user+0x16b/0x1f0 lib/usercopy.c:32 copy_to_user include/linux/uaccess.h:177 [inline] move_addr_to_user+0x2e9/0x4f0 net/socket.c:227 ___sys_recvmsg+0x5d7/0x1140 net/socket.c:2284 __sys_recvmsg net/socket.c:2327 [inline] __do_sys_recvmsg net/socket.c:2337 [inline] __se_sys_recvmsg+0x2fa/0x450 net/socket.c:2334 __x64_sys_recvmsg+0x4a/0x70 net/socket.c:2334 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 RIP: 0033:0x457ec9 Code: 6d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 3b b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f8750c06c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002f RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457ec9 RDX: 0000000000002000 RSI: 0000000020000400 RDI: 0000000000000005 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f8750c076d4 R13: 00000000004c4a60 R14: 00000000004d8140 R15: 00000000ffffffff Uninit was stored to memory at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:204 [inline] kmsan_save_stack mm/kmsan/kmsan.c:219 [inline] kmsan_internal_chain_origin+0x134/0x230 mm/kmsan/kmsan.c:439 __msan_chain_origin+0x70/0xe0 mm/kmsan/kmsan_instr.c:200 ipv6_recv_error+0x1e3f/0x1eb0 net/ipv6/datagram.c:475 udpv6_recvmsg+0x398/0x2ab0 net/ipv6/udp.c:335 inet_recvmsg+0x4fb/0x600 net/ipv4/af_inet.c:830 sock_recvmsg_nosec net/socket.c:794 [inline] sock_recvmsg+0x1d1/0x230 net/socket.c:801 ___sys_recvmsg+0x4d5/0x1140 net/socket.c:2278 __sys_recvmsg net/socket.c:2327 [inline] __do_sys_recvmsg net/socket.c:2337 [inline] __se_sys_recvmsg+0x2fa/0x450 net/socket.c:2334 __x64_sys_recvmsg+0x4a/0x70 net/socket.c:2334 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:204 [inline] kmsan_internal_poison_shadow+0x92/0x150 mm/kmsan/kmsan.c:158 kmsan_kmalloc+0xa6/0x130 mm/kmsan/kmsan_hooks.c:176 kmsan_slab_alloc+0xe/0x10 mm/kmsan/kmsan_hooks.c:185 slab_post_alloc_hook mm/slab.h:446 [inline] slab_alloc_node mm/slub.c:2759 [inline] __kmalloc_node_track_caller+0xe18/0x1030 mm/slub.c:4383 __kmalloc_reserve net/core/skbuff.c:137 [inline] __alloc_skb+0x309/0xa20 net/core/skbuff.c:205 alloc_skb include/linux/skbuff.h:998 [inline] ipv6_local_error+0x1a7/0x9e0 net/ipv6/datagram.c:334 __ip6_append_data+0x129f/0x4fd0 net/ipv6/ip6_output.c:1311 ip6_make_skb+0x6cc/0xcf0 net/ipv6/ip6_output.c:1775 udpv6_sendmsg+0x3f8e/0x45d0 net/ipv6/udp.c:1384 inet_sendmsg+0x54a/0x720 net/ipv4/af_inet.c:798 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg net/socket.c:631 [inline] __sys_sendto+0x8c4/0xac0 net/socket.c:1788 __do_sys_sendto net/socket.c:1800 [inline] __se_sys_sendto+0x107/0x130 net/socket.c:1796 __x64_sys_sendto+0x6e/0x90 net/socket.c:1796 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 Bytes 4-7 of 28 are uninitialized Memory access of size 28 starts at ffff8881937bfce0 Data copied to user address 0000000020000000 Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
-
Konstantin Khlebnikov authored
This fixes false-positive kmemleak reports about leaked neighbour entries: unreferenced object 0xffff8885c6e4d0a8 (size 1024): comm "softirq", pid 0, jiffies 4294922664 (age 167640.804s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 20 2c f3 83 ff ff ff ff ........ ,...... 08 c0 ef 5f 84 88 ff ff 01 8c 7d 02 01 00 00 00 ..._......}..... backtrace: [<00000000748509fe>] ip6_finish_output2+0x887/0x1e40 [<0000000036d7a0d8>] ip6_output+0x1ba/0x600 [<0000000027ea7dba>] ip6_send_skb+0x92/0x2f0 [<00000000d6e2111d>] udp_v6_send_skb.isra.24+0x680/0x15e0 [<000000000668a8be>] udpv6_sendmsg+0x18c9/0x27a0 [<000000004bd5fa90>] sock_sendmsg+0xb3/0xf0 [<000000008227b29f>] ___sys_sendmsg+0x745/0x8f0 [<000000008698009d>] __sys_sendmsg+0xde/0x170 [<00000000889dacf1>] do_syscall_64+0x9b/0x400 [<0000000081cdb353>] entry_SYSCALL_64_after_hwframe+0x49/0xbe [<000000005767ed39>] 0xffffffffffffffff Signed-off-by:Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
-
Colin Ian King authored
There are some lines that have indentation issues, fix these. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Colin Ian King authored
There are handful of lines that have indentation issues, fix these. Signed-off-by:
-
Willem de Bruijn authored
Commit 2efd4fca ("ip: in cmsg IP(V6)_ORIGDSTADDR call pskb_may_pull") avoided a read beyond the end of the skb linear segment by calling pskb_may_pull. That function can trigger a BUG_ON in pskb_expand_head if the skb is shared, which it is when when peeking. It can also return ENOMEM. Avoid both by switching to safer skb_header_pointer. Fixes: 2efd4fca ("ip: in cmsg IP(V6)_ORIGDSTADDR call pskb_may_pull") Reported-by:
-
Stanislav Fomichev authored
BUG: unable to handle kernel NULL pointer dereference at 00000000000000d1 Call Trace: ? napi_gro_frags+0xa7/0x2c0 tun_get_user+0xb50/0xf20 tun_chr_write_iter+0x53/0x70 new_sync_write+0xff/0x160 vfs_write+0x191/0x1e0 __x64_sys_write+0x5e/0xd0 do_syscall_64+0x47/0xf0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 I think there is a subtle race between sending a packet via tap and attaching it: CPU0: CPU1: tun_chr_ioctl(TUNSETIFF) tun_set_iff tun_attach rcu_assign_pointer(tfile->tun, tun); tun_fops->write_iter() tun_chr_write_iter tun_napi_alloc_frags napi_get_frags napi->skb = napi_alloc_skb tun_napi_init netif_napi_add napi->skb = NULL napi->skb is NULL here napi_gro_frags napi_frags_skb skb = napi->skb skb_reset_mac_header(skb) panic() Move rcu_assign_pointer(tfile->tun) and rcu_assign_pointer(tun->tfiles) to be the last thing we do in tun_attach(); this should guarantee that when we call tun_get() we always get an initialized object. v2 changes: * remove extra napi_mutex locks/unlocks for napi operations Reported-by:Stanislav Fomichev <sdf@google.com> Signed-off-by:
-
- 09 Jan, 2019 1 commit
-
-
Jason Gunthorpe authored
'dev' is non NULL when the addr_len check triggers so it must goto a label that does the dev_put otherwise dev will have a leaked refcount. This bug causes the ib_ipoib module to become unloadable when using systemd-network as it triggers this check on InfiniBand links. Fixes: 99137b78 ("packet: validate address length") Reported-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Acked-by:
-
- 08 Jan, 2019 17 commits
-
-
David S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf 2019-01-08 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix BSD'ism in sendmsg(2) to rewrite unspecified IPv6 dst for unconnected UDP sockets with [::1] _after_ cgroup BPF invocation, from Andrey. 2) Follow-up fix to the speculation fix where we need to reject a corner case for sanitation when ptr and scalars are mixed in the same alu op. Also, some unrelated minor doc fixes, from Daniel. 3) Fix BPF kselftest's incorrect uses of create_and_get_cgroup() by not assuming fd of zero value to be the result of an error case, from Stanislav. ==================== Signed-off-by: -
Ido Schimmel authored
Add a VLAN on a bridge port, delete it and make sure the PVID VLAN is not affected. Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Ido Schimmel authored
When a VLAN is deleted from a bridge port we should not change the PVID unless the deleted VLAN is the PVID. Fixes: fe9ccc78 ("mlxsw: spectrum_switchdev: Don't batch VLAN operations") Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Ido Schimmel authored
When running the test on the Spectrum ASIC the generated packets are counted on the ingress filter and injected back to the pipeline because of the 'pass' action. The router block then drops the packets due to checksum error, as the test generates packets with zero checksum. When running the test on an emulator that is not as strict about checksum errors the test fails since packets are counted twice. Once by the emulated ASIC on its ingress filter and again by the kernel as the emulator does not perform checksum validation and allows the packets to be trapped by a matching host route. Fix this by changing the action to 'drop', which will prevent the packet from continuing further in the pipeline to the router block. For veth pairs this change is essentially a NOP given packets are only processed once (by the kernel). Fixes: a0b61f3d ("selftests: forwarding: vxlan_bridge_1d: Add an ECN decap test") Signed-off-by:
Petr Machata <petrm@mellanox.com> Signed-off-by:
-
Ido Schimmel authored
When adding / deleting VLANs to / from a bridge port, the bridge driver first tries to propagate the information via switchdev and falls back to the 8021q driver in case the underlying driver does not support switchdev. This can result in a memory leak [1] when VXLAN and mlxsw ports are enslaved to the bridge: $ ip link set dev vxlan0 master br0 # No mlxsw ports are enslaved to 'br0', so mlxsw ignores the switchdev # notification and the bridge driver adds the VLAN on 'vxlan0' via the # 8021q driver $ bridge vlan add vid 10 dev vxlan0 pvid untagged # mlxsw port is enslaved to the bridge $ ip link set dev swp1 master br0 # mlxsw processes the switchdev notification and the 8021q driver is # skipped $ bridge vlan del vid 10 dev vxlan0 This results in 'struct vlan_info' and 'struct vlan_vid_info' being leaked, as they were allocated by the 8021q driver during VLAN addition, but never freed as the 8021q driver was skipped during deletion. Fix this by introducing a new VLAN private flag that indicates whether the VLAN was added on the port by switchdev or the 8021q driver. If the VLAN was added by the 8021q driver, then we make sure to delete it via the 8021q driver as well. [1] unreferenced object 0xffff88822d20b1e8 (size 256): comm "bridge", pid 2532, jiffies 4295216998 (age 1188.830s) hex dump (first 32 bytes): e0 42 97 ce 81 88 ff ff 00 00 00 00 00 00 00 00 .B.............. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000f82d851d>] kmem_cache_alloc_trace+0x1be/0x330 [<00000000e0178b02>] vlan_vid_add+0x661/0x920 [<00000000218ebd5f>] __vlan_add+0x1be9/0x3a00 [<000000006eafa1ca>] nbp_vlan_add+0x8b3/0xd90 [<000000003535392c>] br_vlan_info+0x132/0x410 [<00000000aedaa9dc>] br_afspec+0x75c/0x870 [<00000000f5716133>] br_setlink+0x3dc/0x6d0 [<00000000aceca5e2>] rtnl_bridge_setlink+0x615/0xb30 [<00000000a2f2d23e>] rtnetlink_rcv_msg+0x3a3/0xa80 [<0000000064097e69>] netlink_rcv_skb+0x152/0x3c0 [<000000008be8d614>] rtnetlink_rcv+0x21/0x30 [<000000009ab2ca25>] netlink_unicast+0x52f/0x740 [<00000000e7d9ac96>] netlink_sendmsg+0x9c7/0xf50 [<000000005d1e2050>] sock_sendmsg+0xbe/0x120 [<00000000d51426bc>] ___sys_sendmsg+0x778/0x8f0 [<00000000b9d7b2cc>] __sys_sendmsg+0x112/0x270 unreferenced object 0xffff888227454308 (size 32): comm "bridge", pid 2532, jiffies 4295216998 (age 1188.882s) hex dump (first 32 bytes): 88 b2 20 2d 82 88 ff ff 88 b2 20 2d 82 88 ff ff .. -...... -.... 81 00 0a 00 01 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000f82d851d>] kmem_cache_alloc_trace+0x1be/0x330 [<0000000018050631>] vlan_vid_add+0x3e6/0x920 [<00000000218ebd5f>] __vlan_add+0x1be9/0x3a00 [<000000006eafa1ca>] nbp_vlan_add+0x8b3/0xd90 [<000000003535392c>] br_vlan_info+0x132/0x410 [<00000000aedaa9dc>] br_afspec+0x75c/0x870 [<00000000f5716133>] br_setlink+0x3dc/0x6d0 [<00000000aceca5e2>] rtnl_bridge_setlink+0x615/0xb30 [<00000000a2f2d23e>] rtnetlink_rcv_msg+0x3a3/0xa80 [<0000000064097e69>] netlink_rcv_skb+0x152/0x3c0 [<000000008be8d614>] rtnetlink_rcv+0x21/0x30 [<000000009ab2ca25>] netlink_unicast+0x52f/0x740 [<00000000e7d9ac96>] netlink_sendmsg+0x9c7/0xf50 [<000000005d1e2050>] sock_sendmsg+0xbe/0x120 [<00000000d51426bc>] ___sys_sendmsg+0x778/0x8f0 [<00000000b9d7b2cc>] __sys_sendmsg+0x112/0x270 Fixes: d70e42b2 ("mlxsw: spectrum: Enable VxLAN enslavement to VLAN-aware bridges") Signed-off-by:Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Ido Schimmel authored
Add a test case for the issue fixed by previous commit. In case the offloading of an unsupported VxLAN tunnel was triggered by adding the mapped VLAN to a local port, then error should be returned to the user. Signed-off-by:
-
Ido Schimmel authored
Adding a VLAN on a port can trigger the offload of a VXLAN tunnel which is already a member in the VLAN. In case the configuration of the VXLAN is not supported, the driver would return -EOPNOTSUPP. This is problematic since bridge code does not interpret this as error, but rather that it should try to setup the VLAN using the 8021q driver instead of switchdev. Fixes: d70e42b2 ("mlxsw: spectrum: Enable VxLAN enslavement to VLAN-aware bridges") Signed-off-by:
-
Ido Schimmel authored
Drivers are not supposed to return errors in switchdev commit phase if they returned OK in prepare phase. Otherwise, a WARNING is emitted. However, when the offloading of a VXLAN tunnel is triggered by the addition of a VLAN on a local port, it is not possible to guarantee that the commit phase will succeed without doing a lot of work. In these cases, the artificial division between prepare and commit phase does not make sense, so simply do the work in the prepare phase. Fixes: d70e42b2 ("mlxsw: spectrum: Enable VxLAN enslavement to VLAN-aware bridges") Signed-off-by:
-
Ido Schimmel authored
When VXLAN is a loadable module, MLXSW_SPECTRUM must not be built-in: drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c:2547: undefined reference to `vxlan_fdb_find_uc' Add Kconfig dependency to enforce usable configurations. Fixes: 1231e04f ("mlxsw: spectrum_switchdev: Add support for VxLAN encapsulation") Signed-off-by:
kbuild test robot <lkp@intel.com> Reviewed-by:
-
Jiri Pirko authored
Make sure that lag port TX is disabled before mlxsw_sp_port_lag_leave() is called and prevent from possible EMAD error. Fixes: 0d65fc13 ("mlxsw: spectrum: Implement LAG port join/leave") Signed-off-by:
-
Nir Dotan authored
Removal of the mlxsw driver on Spectrum-2 platforms hits an ASSERT_RTNL() in Spectrum-2 ACL Bloom filter and in ERP removal paths. This happens because the multicast router implementation in Spectrum-2 relies on ACLs. Taking the RTNL lock upon driver removal is useless since the driver first removes its ports and unregisters from notifiers so concurrent writes cannot happen at that time. The assertions were originally put as a reminder for future work involving ERP background optimization, but having these assertions only during addition serves this purpose as well. Therefore remove the ASSERT_RTNL() in both places related to ERP and Bloom filter removal. Fixes: cf7221a4 ("mlxsw: spectrum_router: Add Multicast routing support for Spectrum-2") Signed-off-by:
Nir Dotan <nird@mellanox.com> Reviewed-by:
-
Nir Dotan authored
When writing to C-TCAM, mlxsw driver uses cregion->ops->entry_insert(). In case of C-TCAM HW insertion error, the opposite action should take place. Add error handling case in which the C-TCAM region entry is removed, by calling cregion->ops->entry_remove(). Fixes: a0a777b9 ("mlxsw: spectrum_acl: Start using A-TCAM") Signed-off-by:
-
Heiner Kallweit authored
This soft dependency works around an issue where sometimes the genphy driver is used instead of the dedicated PHY driver. The root cause of the issue isn't clear yet. People reported the unloading/re-loading module r8169 helps, and also configuring this soft dependency in the modprobe config files. Important just seems to be that the realtek module is loaded before r8169. Once this has been applied preliminary fix 38af4b90 ("net: phy: add workaround for issue where PHY driver doesn't bind to the device") will be removed. Fixes: f1e911d5 ("r8169: add basic phylib support") Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Bryan Whitehead authored
It has been noticed that some phys do not have the registers required by the previous implementation. To fix this, instead of using phy_read, the required information is extracted from the phy_device structure. fixes: 23f0703c ("lan743x: Add main source files for new lan743x driver") Signed-off-by:
Bryan Whitehead <Bryan.Whitehead@microchip.com> Reviewed-by:
-
Eugene Syromiatnikov authored
The ioctl command is read/write (or just read, if the fact that user space writes n_samples field is ignored). Signed-off-by:
Eugene Syromiatnikov <esyr@redhat.com> Signed-off-by:
-
Eugene Syromiatnikov authored
Otherwise it is impossible to use it for something else, as it will break userspace that puts garbage there. The same check should be done in other structures, but the fact that data in reserved fields is ignored is already part of the kernel ABI. Signed-off-by:
-
David S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf 2019-01-08 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix BSD'ism in sendmsg(2) to rewrite unspecified IPv6 dst for unconnected UDP sockets with [::1] _after_ cgroup BPF invocation, from Andrey. 2) Follow-up fix to the speculation fix where we need to reject a corner case for sanitation when ptr and scalars are mixed in the same alu op. Also, some unrelated minor doc fixes, from Daniel. 3) Fix BPF kselftest's incorrect uses of create_and_get_cgroup() by not assuming fd of zero value to be the result of an error case, from Stanislav. ==================== Signed-off-by:
-
- 07 Jan, 2019 13 commits
-
-
Alexei Starovoitov authored
Daniel Borkmann says: ==================== Two trivial doc follow-ups to i) remove deprecated kern_version mentioning in the design qa and ii) to mention stand-alone build and license of libbpf. Thanks! ==================== Signed-off-by:Alexei Starovoitov <ast@kernel.org>
-
Daniel Borkmann authored
Given this came up couple of times, add a note to libbpf's readme about the semi-automated mirror for a stand-alone build which is officially managed by BPF folks. While at it, also explicitly state the libbpf license in the readme file. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
-
Daniel Borkmann authored
Update the bpf_design_QA.rst to also reflect recent changes in 6c4fc209 ("bpf: remove useless version check for prog load"). Suggested-by:
Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by:
-
Stanislav Fomichev authored
We have some tests that assume create_and_get_cgroup returns -1 on error which is incorrect (it returns 0 on error). Since fd might be zero in general case, change create_and_get_cgroup to return -1 on error and fix the users that assume 0 on error. Fixes: f269099a ("tools/bpf: add a selftest for bpf_get_current_cgroup_id() helper") Fixes: 7d2c6cfc ("bpf: use --cgroup in test_suite if supplied") v2: - instead of fixing the uses that assume -1 on error, convert the users that assume 0 on error (fd might be zero in general case) Signed-off-by:
-
Cong Wang authored
In smc_release() we release smc->clcsock before unhash the smc sock, but a parallel smc_diag_dump() may be still reading smc->clcsock, therefore this could cause a use-after-free as reported by syzbot. Reported-and-tested-by: syzbot+fbd1e5476e4c94c7b34e@syzkaller.appspotmail.com Fixes: 51f1de79 ("net/smc: replace sock_put worker by socket refcounting") Cc: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Reported-by: syzbot+0bf2e01269f1274b4b03@syzkaller.appspotmail.com Reported-by: syzbot+e3132895630f957306bc@syzkaller.appspotmail.com Signed-off-by:
-
Jason Gunthorpe authored
This driver requires regmap or the compile fails: drivers/phy/ti/phy-gmii-sel.c:43:27: error: array type has incomplete element type ‘struct reg_field’ const struct reg_field (*regfields)[PHY_GMII_SEL_LAST]; Add it to kconfig. Signed-off-by:
-
JianJhen Chen authored
When handling DNAT'ed packets on a bridge device, the neighbour cache entry from lookup was used without checking its state. It means that a cache entry in the NUD_STALE state will be used directly instead of entering the NUD_DELAY state to confirm the reachability of the neighbor. This problem becomes worse after commit 2724680b ("neigh: Keep neighbour cache entries if number of them is small enough."), since all neighbour cache entries in the NUD_STALE state will be kept in the neighbour table as long as the number of cache entries does not exceed the value specified in gc_thresh1. This commit validates the state of a neighbour cache entry before using the entry. Signed-off-by:
JianJhen Chen <kchen@synology.com> Reviewed-by:
JinLin Chen <jlchen@synology.com> Signed-off-by:
-
Gustavo A. R. Silva authored
There is a memory leak in case genlmsg_put fails. Fix this by freeing *args* before return. Addresses-Coverity-ID: 1476406 ("Resource leak") Fixes: 46273cf7 ("tipc: fix a missing check of genlmsg_put") Signed-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
-
Bjørn Mork authored
This function is unreadable enough without indenting mismatches and unnecessary line breaks. Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Jacob Wen authored
Yes indeed, DIV_ROUND_UP is in kernel.h. Signed-off-by:
Jacob Wen <jian.w.wen@oracle.com> Signed-off-by:
-
Heiner Kallweit authored
Avoid log spam caused by trying to read counters from the chip whilst it is in a PCI power-save state. Reference: https://bugzilla.kernel.org/show_bug.cgi?id=107421 Fixes: 1ef7286e ("r8169: Dereference MMIO address immediately before use") Signed-off-by:
-
Oliver Hartkopp authored
Muyu Yu provided a POC where user root with CAP_NET_ADMIN can create a CAN frame modification rule that makes the data length code a higher value than the available CAN frame data size. In combination with a configured checksum calculation where the result is stored relatively to the end of the data (e.g. cgw_csum_xor_rel) the tail of the skb (e.g. frag_list pointer in skb_shared_info) can be rewritten which finally can cause a system crash. Michael Kubecek suggested to drop frames that have a DLC exceeding the available space after the modification process and provided a patch that can handle CAN FD frames too. Within this patch we also limit the length for the checksum calculations to the maximum of Classic CAN data length (8). CAN frames that are dropped by these additional checks are counted with the CGW_DELETED counter which indicates misconfigurations in can-gw rules. This fixes CVE-2019-3701. Reported-by:
Muyu Yu <ieatmuttonchuan@gmail.com> Reported-by:
Marcus Meissner <meissner@suse.de> Suggested-by:
Michal Kubecek <mkubecek@suse.cz> Tested-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Stephen Warren authored
pci_{,un}map_sg are deprecated and replaced by dma_{,un}map_sg. This is especially relevant since the rest of the driver uses the DMA API. Fix the driver to use the replacement APIs. Signed-off-by:Stephen Warren <swarren@nvidia.com> Reviewed-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
