- 08 Feb, 2023 23 commits
-
-
Krzysztof Kozlowski authored
Convert NVIDIA Tegra HDMI CEC bindings to DT schema. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
Rob Herring <robh@kernel.org> Acked-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab@kernel.org>
-
Krzysztof Kozlowski authored
Convert HDMI CEC GPIO bindings to DT schema. Signed-off-by:
-
Krzysztof Kozlowski authored
Convert Samsung S5P HDMI CEC adapter bindings to DT schema. Signed-off-by:
-
Krzysztof Kozlowski authored
Reference common HDMI CEC adapter properties to simplify the binding and have only one place of definition for common properties. The common CEC binding expects also node name to be 'cec'. Signed-off-by:
-
Krzysztof Kozlowski authored
Reference common HDMI CEC adapter properties to simplify the binding and have only one place of definition for common properties. Signed-off-by:
Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by:
-
Krzysztof Kozlowski authored
Convert common HDMI CEC adapter bindings to DT schema. Signed-off-by:
-
Krzysztof Kozlowski authored
Move st,stm32-cec.yaml bindings to cec subfolder and drop unneeded "bindings" in the title. Signed-off-by:
-
Krzysztof Kozlowski authored
Move amlogic,meson-gx-ao-cec.yaml bindings to cec subfolder and drop unneeded quotes. Signed-off-by:
-
Dong Chuanjian authored
When the pointer variable is judged to be null, null is returned directly. [hverkuil: fix two checkpatch warnings] Signed-off-by:
Dong Chuanjian <chuanjian@nfschina.com> Acked-by:
Nicolas Dufresne <nicolas.dufresne@collabora.com> Fixes: d3f756ad ("media: v4l2: Trace calculated p/b0/b1 initial reflist") Signed-off-by:
-
Chen-Yu Tsai authored
The Hantro driver uses a hardcoded value for the bus_info field in the media device and |struct v4l2_capability|. This worked well when there was just one device. However with the iMX.8 series we are now seeing two Hantro blocks on the same chip. The static bus_info is no longer sufficient for differentiating devices. Since commit f2d8b691 ("media: v4l: ioctl: Set bus_info in v4l_querycap()"), the V4L2 core provides a default value for the bus_info field for platform and PCI devices. This value will match the default value for media devices added by commit cef69974 ("media: mc: Set bus_info in media_device_init()"). These defaults are stable and device-specific. Drop the static bus_info values from the hantro driver and use the defaults. Signed-off-by:
Chen-Yu Tsai <wenst@chromium.org> Reviewed-by:
Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by:
-
Yunfei Dong authored
pm_runtime_put will set RPM_ASYNC flag then queue an idle-notification request again, won't return error immediately until current request is scheduled. But pm_runtime_put_sync run the ->runtime_idle() callback directly, return error immediately no matter whether current request is scheduled. Signed-off-by:
Yunfei Dong <yunfei.dong@mediatek.com> Signed-off-by:
-
Ming Qian authored
in the E.2.1 of Rec. ITU-T H.264 (06/2019), 0 of colour primaries is reserved, and 2 is unspecified. driver can map V4L2_COLORSPACE_LAST to 0, and map V4L2_COLORSPACE_DEFAULT to 2. v4l2_xfer_func and v4l2_ycbcr_encoding are similar case. Fixes: 3cd08451 ("media: amphion: add vpu v4l2 m2m support") Signed-off-by:
Ming Qian <ming.qian@nxp.com> Signed-off-by:
-
Ming Qian authored
using the api of clk_bulk can simplify the code. and the clock of the jpeg codec may be changed, the clk_bulk api can be compatible with the future change. Fixes: 4c2e5156 ("media: imx-jpeg: Add pm-runtime support for imx-jpeg") Signed-off-by:
-
Oleg Verych authored
When removing the module, balance PM runtime enable with the corresponding disable call. Signed-off-by:
Oleg Verych <olecom@gmail.com> Signed-off-by:
-
Colin Ian King authored
Don't populate the const arrays on the stack, instead make them static. Also makes the object code smaller. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Signed-off-by:
-
Colin Ian King authored
Don't populate the read-only const array DURATION on the stack but instead make it static. Also makes the object code a little smaller. Signed-off-by:
-
Deepak R Varma authored
At present, the function imx_media_fim_set_stream() always returns 0. So, convert it to be a function returning void instead. Issue identified using the returnvar.cocci Coccinelle semantic patch. Signed-off-by:
Deepak R Varma <drv@mailo.com> Reviewed-by:
Marco Felsch <m.felsch@pengutronix.de> Signed-off-by:
-
Nicolas Dufresne authored
Since 79c987de, enumerating framesize on format set with "MODE_NONE" (any raw formats) is reporting an invalid frmsize. Size: Stepwise 0x0 - 0x0 with step 0/0 Before this change, the driver would return EINVAL, which is also invalid but worked in GStreamer. The original intent was not to implement it, hence the -ENOTTY return in this change. While drivers should implement ENUM_FRMSIZE for all formats and queues, this change is limited in scope to fix the regression. This fixes taking picture in Gnome Cheese software, or any software using GSteamer to encode JPEG with hardware acceleration. Fixes: 79c987de ("media: hantro: Use post processor scaling capacities") Reported-by:
Robert Mader <robert.mader@collabora.com> Signed-off-by:
Benjamin Gaignard <benjamin.gaignard@collabora.com> Reviewed-by:
-
Zhou jie authored
The void * type pointer does not need to be cast. Signed-off-by:
Zhou jie <zhoujie@nfschina.com> Signed-off-by:
-
Ming Qian authored
The legal identifier of APP14 is "Adobe\0", but sometimes it may be "This is an unknown APP marker . Compliant decoders must ignore it." In this case, just ignore it. It won't affect the decode result. Fixes: b8035f79 ("media: Add parsing for APP14 data segment in jpeg helpers") Signed-off-by:
-
Ming Qian authored
The curr pointer has advanced 14 bytes in jpeg_parse_app14_data. 1. jpeg_get_word_be(stream), it goes forward 2 bytes. 2. jpeg_skip(stream, 11), it goes forward 11 bytes. 3. jpeg_get_byte(stream), it goes forward 1 bytes. so the remain bytes of this segment should be (lp - 2 - 11 - 1), but not (lp - 2 - 11). if driver skip 1 extra bytes, the following parsing may go wrong. Fixes: b8035f79 ("media: Add parsing for APP14 data segment in jpeg helpers") Signed-off-by:
-
Arnd Bergmann authored
The new mdp3 driver uses 'select' to force-enable a couple of drivers it depends on. This is error-prone and likely to cause dependency loops as well as warnings like: WARNING: unmet direct dependencies detected for VIDEO_MEDIATEK_VPU Depends on [n]: MEDIA_SUPPORT [=m] && MEDIA_PLATFORM_SUPPORT [=y] && MEDIA_PLATFORM_DRIVERS [=y] && V4L_MEM2MEM_DRIVERS [=n] && VIDEO_DEV [=m] && (ARCH_MEDIATEK [=y] || COMPILE_TEST [=y]) Selected by [m]: - VIDEO_MEDIATEK_MDP3 [=m] && MEDIA_SUPPORT [=m] && MEDIA_PLATFORM_SUPPORT [=y] && MEDIA_PLATFORM_DRIVERS [=y] && (MTK_IOMMU [=m] || COMPILE_TEST [=y]) && VIDEO_DEV [=m] && (ARCH_MEDIATEK [=y] || COMPILE_TEST [=y]) && HAS_DMA [=y] && REMOTEPROC [=y] This specific warning was already addressed in a previous patch, but there are similar unnecessary 'select' statements, so turn those into 'depends on'. This also means the dependency on ARCH_MEDIATEK is redundant and can be dropped. Fixes: 61890cca ("media: platform: mtk-mdp3: add MediaTek MDP3 driver") Fixes: 9195a860 ("media: platform: mtk-mdp3: remove unused VIDEO_MEDIATEK_VPU config") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by:
-
Arnd Bergmann authored
Marking a case of the switch statement as unreachable means the compiler treats it as undefined behavior, which is then caught by an objtool warning: drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.o: warning: objtool: csiphy_lanes_enable() falls through to next function csiphy_lanes_disable() Instead of simply continuing execution at a random place of the driver, print a warning and return from to the caller, which makes it possible to understand what happens and avoids the warning. Fixes: 53655d2a ("media: camss: csiphy-3ph: add support for SM8250 CSI DPHY") Signed-off-by:
Robert Foss <robert.foss@linaro.org> Signed-off-by:
-
- 06 Feb, 2023 17 commits
-
-
Uwe Kleine-König authored
A remove callback just returning 0 is equivalent to no remove callback at all. So drop the useless function. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Uwe Kleine-König authored
A remove callback just returning 0 is equivalent to no remove callback at all. So drop the useless function. Signed-off-by:
Lad Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Uwe Kleine-König authored
A remove callback just returning 0 is equivalent to no remove callback at all. So drop the useless function. Signed-off-by:
-
Hans Verkuil authored
The streaming state is maintained by the vb2 core, so drivers must never change it themselves. Signed-off-by:
-
Hans Verkuil authored
Don't touch q->streaming directly, use the vb2_is_streaming() function instead. Signed-off-by:
-
Hans Verkuil authored
Don't touch q->streaming directly, use the vb2_is_streaming() function instead. Signed-off-by:
-
Jammy Huang authored
Use URL rather than plain text. Signed-off-by:
Jammy Huang <jammy_huang@aspeedtech.com> Signed-off-by:
-
Jammy Huang authored
Use URL rather than plain text. Signed-off-by:
-
Krzysztof Kozlowski authored
The field 'pctrl' in 'struct fimc_is' is not used, just like linux/pinctrl/consumer.h headers in the headers. Signed-off-by:
-
Krzysztof Kozlowski authored
The bindings expect "cec" for HDMI CEC node. Signed-off-by:
-
Qiheng Lin authored
In case of error, the function mtk_mutex_get() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). And also fix the err_free_mutex case. Fixes: 61890cca ("media: platform: mtk-mdp3: add MediaTek MDP3 driver") Signed-off-by:
Qiheng Lin <linqiheng@huawei.com> Reviewed-by:
-
Hans Verkuil authored
The sanity check in __vb2_queue_free() is obsolete ever since commit f035eb4e ("[media] videobuf2: fix lockdep warning"). Remove it and let __vb2_queue_free() return void. Signed-off-by:
-
Ming Qian authored
record the colorspace set by user. if it's not supported by h264 vui, then zero will be written to vui, but don't modify the user setting. Fixes: 0401e659 ("media: amphion: add v4l2 m2m vpu encoder stateful driver") Signed-off-by:
-
Yang Li authored
./drivers/media/platform/renesas/rzg2l-cru/rzg2l-csi2.c:409:2-3: Unneeded semicolon ./drivers/media/platform/renesas/rzg2l-cru/rzg2l-video.c:407:2-3: Unneeded semicolon Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3273Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Signed-off-by:
-
Dmitry Torokhov authored
There are no existing users of s5c73m3_platform_data in the tree, and new users should either be using device tree, ACPI, or static device properties, so let's remove it from the driver. Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Eugen Hristev authored
v4l2_dbg and friends are legacy and should be removed. Replaced all the calls with dev_dbg equivalent. This also removes the 'debug' module parameter which has become obsolete. Signed-off-by:
Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by:
-
Gerald Loacker authored
Add driver for the Sony IMX415 CMOS image sensor. Signed-off-by:
Gerald Loacker <gerald.loacker@wolfvision.net> Co-developed-by:
Michael Riesch <michael.riesch@wolfvision.net> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
