- 05 Dec, 2022 32 commits
-
-
Filipe Manana authored
When doing backref walking to determine if an extent is shared, we are testing the root_objectid of the given share_check struct is 0, but that is an impossible case, since btrfs_is_data_extent_shared() always initializes the root_objectid field with the id of the given root, and no root can have an objectid of 0. So remove those checks. Signed-off-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Filipe Manana authored
When allocating an extent buffer, at __alloc_extent_buffer(), there's no point in explicitly assigning zero to the bflags field of the new extent buffer because we allocated it with kmem_cache_zalloc(). So just remove the redundant initialization, it saves one mov instruction in the generated assembly code for x86_64 ("movq $0x0,0x10(%rax)"). Signed-off-by: -
Filipe Manana authored
At btrfs_clone_extent_buffer(), before allocating the pages array for the new extent buffer we are calling memset() to zero out the pages array of the extent buffer. This is pointless however, because the extent buffer already has every element in its pages array pointing to NULL, as it was allocated with kmem_cache_zalloc(). The memset() was introduced with commit dd137dd1 ("btrfs: factor out allocating an array of pages"), but even before that commit we already depended on the pages array being initialized to NULL for the error paths that need to call btrfs_release_extent_buffer(). So remove the memset(), it's useless and slightly increases the object text size. Before this change: $ size fs/btrfs/extent_io.o text data bss dec hex filename 70580 5469 40 76089 12939 fs/btrfs/extent_io.o After this change: $ size fs/btrfs/extent_io.o text data bss dec hex filename 70564 5469 40 76073 12929 fs/btrfs/extent_io.o Signed-off-by:
-
Filipe Manana authored
During fiemap and lseek (hole and data seeking), there's no point in iterating the inode's io tree to count delalloc bits if the inode's delalloc bytes counter has a value of zero, as that counter is updated whenever we set a range for delalloc or clear a range from delalloc. So skip the counting and io tree iteration if the inode's delalloc bytes counter has a value of zero. This helps save time when processing a file range corresponding to a hole or prealloc (unwritten) extent. This patch is part of a series comprised of the following patches: btrfs: get the next extent map during fiemap/lseek more efficiently btrfs: skip unnecessary extent map searches during fiemap and lseek btrfs: skip unnecessary delalloc search during fiemap and lseek The following test was performed on a release kernel (Debian's default kernel config) before and after applying those 3 patches. # Wrapper to call fiemap in extent count only mode. # (struct fiemap::fm_extent_count set to 0) $ cat fiemap.c #include <stdio.h> #include <unistd.h> #include <stdlib.h> #include <fcntl.h> #include <errno.h> #include <string.h> #include <sys/ioctl.h> #include <linux/fs.h> #include <linux/fiemap.h> int main(int argc, char **argv) { struct fiemap fiemap = { 0 }; int fd; if (argc != 2) { printf("usage: %s <path>\n", argv[0]); return 1; } fd = open(argv[1], O_RDONLY); if (fd < 0) { fprintf(stderr, "error opening file: %s\n", strerror(errno)); return 1; } /* fiemap.fm_extent_count set to 0, to count extents only. */ fiemap.fm_length = FIEMAP_MAX_OFFSET; if (ioctl(fd, FS_IOC_FIEMAP, &fiemap) < 0) { fprintf(stderr, "fiemap error: %s\n", strerror(errno)); return 1; } close(fd); printf("fm_mapped_extents = %d\n", fiemap.fm_mapped_extents); return 0; } $ gcc -o fiemap fiemap.c And the wrapper shell script that creates a file with many holes and runs fiemap against it: $ cat test.sh #!/bin/bash DEV=/dev/sdi MNT=/mnt/sdi mkfs.btrfs -f $DEV mount $DEV $MNT FILE_SIZE=$((1 * 1024 * 1024 * 1024)) echo -n > $MNT/foobar for ((off = 0; off < $FILE_SIZE; off += 8192)); do xfs_io -c "pwrite -S 0xab $off 4K" $MNT/foobar > /dev/null done # flush all delalloc sync start=$(date +%s%N) ./fiemap $MNT/foobar end=$(date +%s%N) dur=$(( (end - start) / 1000000 )) echo "fiemap took $dur milliseconds" umount $MNT Result before applying patchset: fm_mapped_extents = 131072 fiemap took 63 milliseconds Result after applying patchset: fm_mapped_extents = 131072 fiemap took 39 milliseconds (-38.1%) Running the same test for a 512M file instead of a 1G file, gave the following results. Result before applying patchset: fm_mapped_extents = 65536 fiemap took 29 milliseconds Result after applying patchset: fm_mapped_extents = 65536 fiemap took 20 milliseconds (-31.0%) Signed-off-by: -
Filipe Manana authored
If we have no outstanding extents it means we don't have any extent maps corresponding to delalloc that is flushing, as when an ordered extent is created we increment the number of outstanding extents to 1 and when we remove the ordered extent we decrement them by 1. So skip extent map tree searches if the number of outstanding ordered extents is 0, saving time as the tree is not empty if we have previously made some reads or flushed delalloc, as in those cases it can have a very large number of extent maps for files with many extents. This helps save time when processing a file range corresponding to a hole or prealloc (unwritten) extent. The next patch in the series has a performance test in its changelog and its subject is: "btrfs: skip unnecessary delalloc search during fiemap and lseek" Signed-off-by: -
Filipe Manana authored
At find_delalloc_subrange(), when we need to get the next extent map, we do a full search on the extent map tree (a red black tree). This is fine but it's a lot more efficient to simply use rb_next(), which typically requires iterating over less nodes of the tree and never needs to compare the ranges of nodes with the one we are looking for. So add a public helper to extent_map.{h,c} to get the extent map that immediately follows another extent map, using rb_next(), and use that helper at find_delalloc_subrange(). Signed-off-by: -
Qu Wenruo authored
For Btrfs RAID56, we have a caching system for btrfs raid bios (rbio). We call cache_rbio_pages() to mark a qualified rbio ready for cache. The timing happens at: - finish_rmw() At this timing, we have already read all necessary sectors, along with the rbio sectors, we have covered all data stripes. - __raid_recover_end_io() At this timing, we have rebuild the rbio, thus all data sectors involved (either from stripe or bio list) are uptodate now. Thus at the timing of cache_rbio_pages(), we should have all data sectors uptodate. This patch will make it explicit that all data sectors are uptodate at cache_rbio_pages() timing, mostly to prepare for the incoming verification at RMW time. This patch will add: - Extra ASSERT()s in cache_rbio_pages() This is to make sure all data sectors, which are not covered by bio, are already uptodate. - Extra ASSERT()s in steal_rbio() Since only cached rbio can be stolen, thus every data sector should already be uptodate in the source rbio. - Update __raid_recover_end_io() to update recovered sector->uptodate Previously __raid_recover_end_io() will only mark failed sectors uptodate if it's doing an RMW. But this can trigger new ASSERT()s, as for recovery case, a recovered failed sector will not be marked uptodate, and trigger ASSERT() in later cache_rbio_pages() call. Signed-off-by:
Qu Wenruo <wqu@suse.com> Signed-off-by:
-
Qu Wenruo authored
Currently inside alloc_rbio(), we allocate a larger memory to contain the following members: - struct btrfs_raid_rbio itself - stripe_pages array - bio_sectors array - stripe_sectors array - finish_pointers array Then update rbio pointers to point the extra space after the rbio structure itself. Thus it introduced a complex CONSUME_ALLOC() macro to help the thing. This is too hacky, and is going to make later pointers expansion harder. This patch will change it to use regular kcalloc() for each pointer inside btrfs_raid_bio, making the later expansion much easier. And introduce a helper free_raid_bio_pointers() to free up all the pointer members in btrfs_raid_bio, which will be used in both free_raid_bio() and error path of alloc_rbio(). Signed-off-by:
-
Qu Wenruo authored
The cleanup involves two things: - Remove the "__" prefix There is no naming confliction. - Remove the forward declaration There is no special function call involved. Signed-off-by:
-
Josef Bacik authored
Inside of FB, as well as some user reports, we've had a consistent problem of occasional ENOSPC transaction aborts. Inside FB we were seeing ~100-200 ENOSPC aborts per day in the fleet, which is a really low occurrence rate given the size of our fleet, but it's not nothing. There are two causes of this particular problem. First is delayed allocation. The reservation system for delalloc assumes that contiguous dirty ranges will result in 1 file extent item. However if there is memory pressure that results in fragmented writeout, or there is fragmentation in the block groups, this won't necessarily be true. Consider the case where we do a single 256MiB write to a file and then close it. We will have 1 reservation for the inode update, the reservations for the checksum updates, and 1 reservation for the file extent item. At some point later we decide to write this entire range out, but we're so fragmented that we break this into 100 different file extents. Since we've already closed the file and are no longer writing to it there's nothing to trigger a refill of the delalloc block rsv to satisfy the 99 new file extent reservations we need. At this point we exhaust our delalloc reservation, and we begin to steal from the global reserve. If you have enough of these cases going in parallel you can easily exhaust the global reserve, get an ENOSPC at btrfs_alloc_tree_block() time, and then abort the transaction. The other case is the delayed refs reserve. The delayed refs reserve updates its size based on outstanding delayed refs and dirty block groups. However we only refill this block reserve when returning excess reservations and when we call btrfs_start_transaction(root, X). We will reserve 2*X credits at transaction start time, and fill in X into the delayed refs reserve to make sure it stays topped off. Generally this works well, but clearly has downsides. If we do a particularly delayed ref heavy operation we may never catch up in our reservations. Additionally running delayed refs generates more delayed refs, and at that point we may be committing the transaction and have no way to trigger a refill of our delayed refs rsv. Then a similar thing occurs with the delalloc reserve. Generally speaking we well over-reserve in all of our block rsvs. If we reserve 1 credit we're usually reserving around 264k of space, but we'll often not use any of that reservation, or use a few blocks of that reservation. We can be reasonably sure that as long as you were able to reserve space up front for your operation you'll be able to find space on disk for that reservation. So introduce a new flushing state, BTRFS_RESERVE_FLUSH_EMERGENCY. This gets used in the case that we've exhausted our reserve and the global reserve. It simply forces a reservation if we have enough actual space on disk to make the reservation, which is almost always the case. This keeps us from hitting ENOSPC aborts in these odd occurrences where we've not kept up with the delayed work. Fixing this in a complete way is going to be relatively complicated and time consuming. This patch is what I discussed with Filipe earlier this year, and what I put into our kernels inside FB. With this patch we're down to 1-2 ENOSPC aborts per week, which is a significant reduction. This is a decent stop gap until we can work out a more wholistic solution to these two corner cases. Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
-
Josef Bacik authored
These are wrapped in CONFIG_FS_VERITY, but we can have the definitions without verity enabled. Move these definitions up with the other accessor helpers. Reviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by:
-
Josef Bacik authored
This uses btrfs_header_nritems, which I will be moving out of ctree.h. In order to avoid needing to include the relevant header in ctree.h, simply move this helper function into ctree.c. Reviewed-by:
-
Josef Bacik authored
This is local to the free-space-cache.c code, remove it from ctree.h and inode.c, create new init/exit functions for the cachep, and move it locally to free-space-cache.c. Reviewed-by:
-
Josef Bacik authored
This is local to the ctree code, remove it from ctree.h and inode.c, create new init/exit functions for the cachep, and move it locally to ctree.c. Reviewed-by:
-
Josef Bacik authored
This is local to the transaction code, remove it from ctree.h and inode.c, create new helpers in the transaction to handle the init work and move the cachep locally to transaction.c. Reviewed-by:
-
Josef Bacik authored
This isn't used outside of inode.c, there's no reason to define it in btrfs_inode.h. Drop the inline and add __cold as it's for errors that are not in any hot path. Reviewed-by:
-
Josef Bacik authored
This code is used in space-info.c, move the definitions to space-info.h. Reviewed-by:
-
Josef Bacik authored
This function uses functions that are not defined in block-group.h, move it into block-group.c in order to keep the header clean. Reviewed-by:
-
Josef Bacik authored
These definitions are used for discard statistics, move them out of ctree.h and put them in free-space-cache.h. Reviewed-by:
-
Josef Bacik authored
This is only used locally in scrub.c, move it out of ctree.h into scrub.c. Reviewed-by:
-
Josef Bacik authored
We have maximum link and name length limits, move these to btrfs_tree.h as they're on disk limitations. Reviewed-by:
-
Josef Bacik authored
This inline helper calls btrfs_fs_compat_ro(), which is defined in another header. To avoid weird header dependency problems move this helper into disk-io.c with the rest of the global root helpers. Reviewed-by:
-
Josef Bacik authored
The bulk of our on-disk definitions exist in btrfs_tree.h, which user space can use. Keep things consistent and move the rest of the on disk definitions out of ctree.h into btrfs_tree.h. Note I did have to update all u8's to __u8, but otherwise this is a strict copy and paste. Most of the definitions are mainly for internal use and are not guaranteed stable public API and may change as we need. Compilation failures by user applications can happen. Reviewed-by:
-
Josef Bacik authored
The last user of this definition was removed in patch f26c9238 ("btrfs: remove reada infrastructure") so we can remove this definition. Reviewed-by:
-
Josef Bacik authored
This hasn't been used since 138a12d8 ("btrfs: rip out btrfs_space_info::total_bytes_pinned") so it is safe to remove. Reviewed-by:
-
Josef Bacik authored
The last users of these helpers were removed in 5297199a ("btrfs: remove inode number cache feature") so delete these helpers. The point was for mount options that were applicable after transaction commit so they could not be applied immediately. We don't have such options anymore and if we do the patch can be reverted. Reviewed-by:
-
Peng Hao authored
Since leaf is already NULL, and no other branch will go to fail_unlock, the fail_unlock label is useless and can be removed Signed-off-by:
Peng Hao <flyingpeng@tencent.com> Reviewed-by:
-
Josef Bacik authored
We don't use a cached state here at all, which generally makes sense as async reads are going to unlock at endio time. However for blocking reads we will call wait_extent_bit() for our range. Since the lock_extent() stuff will return the cached_state for the start of the range this is a helpful optimization to have for this case, we'll have the exact state we want to wait on. Add a cached state here and simply throw it away if we're a non-blocking read, otherwise we'll get a small improvement by eliminating some tree searches. Reviewed-by:
-
Josef Bacik authored
Currently if we fail to lock a range we'll return the start of the range that we failed to lock. We'll then search down to this range and wait on any extent states in this range. However we can avoid this search altogether if we simply cache the extent_state that had the contention. We can pass this into wait_extent_bit() and start from that extent_state without doing the search. In the most optimistic case we can avoid all searches, more likely we'll avoid the initial search and have to perform the search after we wait on the failed state, or worst case we must search both times which is what currently happens. Reviewed-by:
-
Josef Bacik authored
All of the relocation code avoids using the cached state, despite everywhere using the normal lock_extent() // do something unlock_extent() pattern. Fix this by plumbing a cached state throughout all of these functions in order to allow for less tree searches. Reviewed-by:
-
Josef Bacik authored
Now that try_lock_extent() takes a cached_state, plumb the cached_state through btrfs_try_lock_ordered_range() and then use a cached_state in btrfs_check_nocow_lock everywhere to avoid extra tree searches on the extent_io_tree. Reviewed-by:
-
Josef Bacik authored
With nowait becoming more pervasive throughout our codebase go ahead and add a cached_state to try_lock_extent(). This allows us to be faster about clearing the locked area if we have contention, and then gives us the same optimization for unlock if we are able to lock the range. Reviewed-by:
-
- 04 Dec, 2022 7 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
This reverts commit f35b5d7d. It has been reported to cause huge performance regressions on some loads (will-it-scale.per_process_ops, but also building the kernel with clang). The commit did speed up gcc builds by a small amount, so it's not an unambiguous regression, but until the big regressions are understood, let's revert it. Reported-by:
kernel test robot <yujie.liu@intel.com> Link: https://lore.kernel.org/r/202210181535.7144dd15-yujie.liu@intel.comReported-by:
Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/lkml/Y1DNQaoPWxE%2BrGce@dev-arch.thelio-3990X/ Cc: Huang, Ying <ying.huang@intel.com> Cc: Rik van Riel <riel@surriel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jan Dabros authored
Currently tpm transactions are executed unconditionally in tpm_pm_suspend() function, which may lead to races with other tpm accessors in the system. Specifically, the hw_random tpm driver makes use of tpm_get_random(), and this function is called in a loop from a kthread, which means it's not frozen alongside userspace, and so can race with the work done during system suspend: tpm tpm0: tpm_transmit: tpm_recv: error -52 tpm tpm0: invalid TPM_STS.x 0xff, dumping stack for forensics CPU: 0 PID: 1 Comm: init Not tainted 6.1.0-rc5+ #135 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-20220807_005459-localhost 04/01/2014 Call Trace: tpm_tis_status.cold+0x19/0x20 tpm_transmit+0x13b/0x390 tpm_transmit_cmd+0x20/0x80 tpm1_pm_suspend+0xa6/0x110 tpm_pm_suspend+0x53/0x80 __pnp_bus_suspend+0x35/0xe0 __device_suspend+0x10f/0x350 Fix this by calling tpm_try_get_ops(), which itself is a wrapper around tpm_chip_start(), but takes the appropriate mutex. Signed-off-by:
Jan Dabros <jsd@semihalf.com> Reported-by:
Vlastimil Babka <vbabka@suse.cz> Tested-by:
Jason A. Donenfeld <Jason@zx2c4.com> Tested-by:
Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fix from Borislav Petkov: - Fix a use-after-free case where the perf pending task callback would see an already freed event * tag 'perf_urgent_for_v6.1_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Fix perf_pending_task() UaF
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fix from Borislav Petkov: - Revert a fix to RISC-V timers supposed to address an uncertainty whether clock events are received during S3 or not which locks up other RISC-V platforms. The issue will be fixed differently later. * tag 'timers_urgent_for_v6.1_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "clocksource/drivers/riscv: Events are stopped during CPU suspend"
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - Fix oops in 32-bit BPF tail call tests - Add missing declaration for machine_check_early_boot() Thanks to Christophe Leroy and Naveen N. Rao. * tag 'powerpc-6.1-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: Add missing declaration for machine_check_early_boot() powerpc/bpf/32: Fix Oops on tail call tests
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input fix from Dmitry Torokhov: - a fix for Raydium touchscreen driver to stop leaking memory when sending commands to the chip * tag 'input-for-v6.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: raydium_ts_i2c - fix memory leak in raydium_i2c_send()
-
- 03 Dec, 2022 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "A power state fix in the core for ACPI devices, a regression fix regarding bus recovery for the cadence driver, a DMA handling fix for the imx driver, and two error path fixes (npcm7xx and qcom-geni)" * tag 'i2c-for-6.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: imx: Only DMA messages with I2C_M_DMA_SAFE flag set i2c: qcom-geni: fix error return code in geni_i2c_gpi_xfer i2c: cadence: Fix regression with bus recovery i2c: Restore initial power state if probe fails i2c: npcm7xx: Fix error handling in npcm_i2c_init()
-
