I believe RX FIFO depth define 0 is incorrect on Wangxun 10Gb NIC. It
must be at least 1 since code is able to read received data from the
DW_IC_DATA_CMD register.

For now this define is irrelevant since the txgbe_i2c_dw_xfer_quirk()
doesn't use the rx_fifo_depth member variable of struct dw_i2c_dev but
is needed when converting code into generic polling mode implementation.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>

Code is more logically arranged when i2c_dw_read_clear_intrbits() and
i2c_dw_isr() are located before i2c_dw_xfer().

Real reason for this is to prepare for more shared code between
interrupt and polling mode code.

While at it, remove one extra space and refer to the
i2c_dw_init_master() in two comment sections.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>

Convert access to DW_IC_INTR_MASK register using the existing
__i2c_dw_write_intr_mask() and a __i2c_dw_read_intr_mask() introduced
here. Motivation to this is to prepare for generic polling mode code
where polling mode will use a SW mask instead of DW_IC_INTR_MASK.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>

I was testing the polling mode txgbe_i2c_dw_xfer_quirk() on a HW where
the i2c-designware has interrupt connected and shared with other device.
I noticed there is a bogus interrupt for each transfer.

Reason for this that both polling mode functions call the
i2c_dw_xfer_init() which enable interrupts then followed by immediate
disable by the same polling mode functions. This is enough to trigger
TX_EMPTY interrupt.

Fix this by introducing a __i2c_dw_write_intr_mask() helper that unmasks
interrupts conditionally and use it in i2c_dw_xfer_init().
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>

Currently initialization flow in i2c_dw_probe_master() skips a few steps
and has code duplication for polling mode implementation.

Simplify this by adding a new ACCESS_POLLING flag that is set for those
two platforms that currently use polling mode and use it to skip
interrupt handler setup.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>

Add compatible string for sam9x7.
Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>

Add i.MX95 LPI2C compatible entry, same as i.MX93 compatible
with i.MX7ULP.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>

In the npcm_i2c_reg_slave() function, there was a redundant
comparison that checked if 'bus->slave' was null immediately after
assigning it the 'client' value. There were concerns about a
potential null dereference because of `client->adapter`, but
according to Wolfram Sang, "we trusted ourselves here" Therefore,
this comparison is unnecessary.

Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Rand Deeb <rand.sec96@gmail.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>

Avoid code duplication and factor out retrieving and checking the
block length value to new helper i801_get_block_len().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>

Add a sentinel length value that is used to check whether we should
read and use the length value provided by the slave device.
This simplifies the currently used checks.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>

i2c and smbus block transaction handling have little in common,
therefore split this function to improve code readability.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>

Avoid code duplication and factor out checking and clearing PEC error
bit to new helper i801_check_and_clear_pec_error().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>

This change simplifies the code a little and makes clearer that the
ICH5 feature set is an extension of the ICH4 feature set.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>

Document support for the I2C Bus Interfaces in the Renesas R-Car V4M
(R8A779H0) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>

The driver receives the tx fifo almost empty(aempty) interrupt and
reads the tx_aempty_int_mstat to start a round of data transfer.
The operation of clearing the TX aempty interrupt after completing
a write cycle is added to ensure that the FIFO is truly at almost
empty status when an aempty interrupt is received.
The threshold for fifo almost empty interrupt is defined as 1.
Signed-off-by: Devyn Liu <liudingyuan@huawei.com>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>

The driver finishes a write cycle by read the fifo tx full status
or write limit decrease to 0. The driver starts to write data to
the FIFO after the I2C FIFO almost empty interrupt is reported.
The threshold for FIFO almost empty interrupt is that the amount
of data in the FIFO is less than or equal to 1.
Reduce write maxwrite to the fifo depth - aempty interrupt
threshold. Limiting the number of data to be written at a time
to remaining fifo capacity.
Signed-off-by: Devyn Liu <liudingyuan@huawei.com>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>

Switch the R-Mobile A1, R-Mobile APE6, and SH-Mobile AG5 SoCs to the new
frequency calculation formula, to (a) avoid running the I2C bus too fast,
and (b) bring the low/high ratio closer to the recommended ratio 5/4.

As this makes fast_clock_dt_config and v2_freq_calc_dt_config identical,
merge them into a single fast_clock_dt_config.

Legacy SH users (sh7343, sh7366, and sh772[234]) are left alone, and
still use the old formula.

Measurement results on R-Mobile APE6 and SH-Mobile AG5 (fck=104 MHz,
clks_per_count=2):
  100 kHz: 106 kHz LH=1.12 before, 99.6 kHz L/H=1.22 after
  400 kHz: 384 kHz LH=1.67 before, 392 kHz L/H=1.27 after

Measurement results on R-Mobile A1 (fck=49.5 MHz, clks_per_count=1):
  100 kHz: 106 kHz L/H=1.09 before, 99.6 kHz L/H=1.20 after
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>

Starting with
commit 75820314 ("i2c: core: add generic I2C GPIO recovery")
GPIO bus recovery is supported by the I2C core, so we can remove the
driver implementation and use that one instead.

As a nice side-effect, pinctrl becomes optional, allowing bus recovery on
LS1021A, which does not have such luxury, but can be wired up to use extra
fixed GPIO pins.

Note: The previous error messages about bus recovery not being supported is
dropped with this change. Given that it is perfectly possible to have platforms
where bus recovery works without pinctrl support, I happen to work on one such,
both error messages does not really make sense in those cases. And I don't see
how to know if this is the case or not.
Signed-off-by: Esben Haabendal <esben@geanix.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>

Argument priv isn't used, so remove it.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>

Replace magic number 10 with the appropriate constant.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>

Enable additional features based on DT settings and unconditionally
release the shared interrupt pin after 1.6 seconds and allow to use
it as reset.

These features aren't enabled by default and it's up to board designer
to validate for proper functioning and detection of devices in secondary
bus as sometimes it can cause secondary bus being disabled.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>

Maxim Max7357 has a configuration register to enable additional
features. These features aren't enabled by default & its up to
board designer to enable the same as it may have unexpected side effects.

These should be validated for proper functioning & detection of devices
in secondary bus as sometimes it can cause secondary bus being disabled.

Add booleans for:
 - maxim,isolate-stuck-channel
 - maxim,send-flush-out-sequence
 - maxim,preconnection-wiggle-test-enable
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>

Pull ext4 fixes from Ted Ts'o:
 "Miscellaneous bug fixes and cleanups in ext4's multi-block allocator
  and extent handling code"

* tag 'for-linus-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (23 commits)
  ext4: make ext4_set_iomap() recognize IOMAP_DELALLOC map type
  ext4: make ext4_map_blocks() distinguish delalloc only extent
  ext4: add a hole extent entry in cache after punch
  ext4: correct the hole length returned by ext4_map_blocks()
  ext4: convert to exclusive lock while inserting delalloc extents
  ext4: refactor ext4_da_map_blocks()
  ext4: remove 'needed' in trace_ext4_discard_preallocations
  ext4: remove unnecessary parameter "needed" in ext4_discard_preallocations
  ext4: remove unused return value of ext4_mb_release_group_pa
  ext4: remove unused return value of ext4_mb_release_inode_pa
  ext4: remove unused return value of ext4_mb_release
  ext4: remove unused ext4_allocation_context::ac_groups_considered
  ext4: remove unneeded return value of ext4_mb_release_context
  ext4: remove unused parameter ngroup in ext4_mb_choose_next_group_*()
  ext4: remove unused return value of __mb_check_buddy
  ext4: mark the group block bitmap as corrupted before reporting an error
  ext4: avoid allocating blocks from corrupted group in ext4_mb_find_by_goal()
  ext4: avoid allocating blocks from corrupted group in ext4_mb_try_best_found()
  ext4: avoid dividing by 0 in mb_update_avg_fragment_size() when block bitmap corrupt
  ext4: avoid bb_free and bb_fragments inconsistency in mb_free_blocks()
  ...

Pull smb client fixes from Steve French:
 "Five smb3 client fixes, mostly multichannel related:

   - four multichannel fixes including fix for channel allocation when
     multiple inactive channels, fix for unneeded race in channel
     deallocation, correct redundant channel scaling, and redundant
     multichannel disabling scenarios

   - add warning if max compound requests reached"

* tag 'v6.8-rc3-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  smb: client: increase number of PDUs allowed in a compound request
  cifs: failure to add channel on iface should bump up weight
  cifs: do not search for channel if server is terminating
  cifs: avoid redundant calls to disable multichannel
  cifs: make sure that channel scaling is done only once

Pull xfs fixes from Chandan Babu:

 - Clear XFS_ATTR_INCOMPLETE filter on removing xattr from a node format
   attribute fork

 - Remove conditional compilation of realtime geometry validator
   functions to prevent confusing error messages from being printed on
   the console during the mount operation

* tag 'xfs-6.8-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: remove conditional building of rt geometry validator functions
  xfs: reset XFS_ATTR_INCOMPLETE filter on node removal

Pull char/misc driver fixes from Greg KH:
 "Here are three tiny driver fixes for 6.8-rc3.  They include:

   - Android binder long-term bug with epoll finally being fixed

   - fastrpc driver shutdown bugfix

   - open-dice lockdep fix

  All of these have been in linux-next this week with no reported
  issues"

* tag 'char-misc-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  binder: signal epoll threads of self-work
  misc: open-dice: Fix spurious lockdep warning
  misc: fastrpc: Mark all sessions as invalid in cb_remove

Pull tty and serial driver fixes from Greg KH:
 "Here are some small tty and serial driver fixes for 6.8-rc3 that
  resolve a number of reported issues. Included in here are:

   - rs485 flag definition fix that affected the user/kernel abi in -rc1

   - max310x driver fixes

   - 8250_pci1xxxx driver off-by-one fix

   - uart_tiocmget locking race fix

  All of these have been in linux-next for over a week with no reported
  issues"

* tag 'tty-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: max310x: prevent infinite while() loop in port startup
  serial: max310x: fail probe if clock crystal is unstable
  serial: max310x: improve crystal stable clock detection
  serial: max310x: set default value when reading clock ready bit
  serial: core: Fix atomicity violation in uart_tiocmget
  serial: 8250_pci1xxxx: fix off by one in pci1xxxx_process_read_data()
  tty: serial: Fix bit order in RS485 flag definitions

Pull USB driver fixes from Greg KH:
 "Here are a bunch of small USB driver fixes for 6.8-rc3. Included in
  here are:

   - new usb-serial driver ids

   - new dwc3 driver id added

   - typec driver change revert

   - ncm gadget driver endian bugfix

   - xhci bugfixes for a number of reported issues

   - usb hub bugfix for alternate settings

   - ulpi driver debugfs memory leak fix

   - chipidea driver bugfix

   - usb gadget driver fixes

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (24 commits)
  USB: serial: option: add Fibocom FM101-GL variant
  USB: serial: qcserial: add new usb-id for Dell Wireless DW5826e
  USB: serial: cp210x: add ID for IMST iM871A-USB
  usb: typec: tcpm: fix the PD disabled case
  usb: ucsi_acpi: Quirk to ack a connector change ack cmd
  usb: ucsi_acpi: Fix command completion handling
  usb: ucsi: Add missing ppm_lock
  usb: ulpi: Fix debugfs directory leak
  Revert "usb: typec: tcpm: fix cc role at port reset"
  usb: gadget: pch_udc: fix an Excess kernel-doc warning
  usb: f_mass_storage: forbid async queue when shutdown happen
  USB: hub: check for alternate port before enabling A_ALT_HNP_SUPPORT
  usb: chipidea: core: handle power lost in workqueue
  usb: dwc3: gadget: Fix NULL pointer dereference in dwc3_gadget_suspend
  usb: dwc3: pci: add support for the Intel Arrow Lake-H
  usb: core: Prevent null pointer dereference in update_port_device_state
  xhci: handle isoc Babble and Buffer Overrun events properly
  xhci: process isoc TD properly when there was a transaction error mid TD.
  xhci: fix off by one check when adding a secondary interrupter.
  xhci: fix possible null pointer dereference at secondary interrupter removal
  ...

Pull i2c fixlet from Wolfram Sang:
 "MAINTAINERS update to point people to the new tree for i2c host driver
  changes"

* tag 'i2c-for-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  MAINTAINERS: Update i2c host drivers repository

Pull dmaengine fixes from Vinod Koul:
 "Core:

   - fix return value of is_slave_direction() for D2D dma

  Driver fixes for:

   - Documentaion fixes to resolve warnings for at_hdmac driver

   - bunch of fsl driver fixes for memory leaks, and useless kfree

   - TI edma and k3 fixes for packet error and null pointer checks"

* tag 'dmaengine-fix-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
  dmaengine: at_hdmac: add missing kernel-doc style description
  dmaengine: fix is_slave_direction() return false when DMA_DEV_TO_DEV
  dmaengine: fsl-qdma: Remove a useless devm_kfree()
  dmaengine: fsl-qdma: Fix a memory leak related to the queue command DMA
  dmaengine: fsl-qdma: Fix a memory leak related to the status queue DMA
  dmaengine: ti: k3-udma: Report short packet errors
  dmaengine: ti: edma: Add some null pointer checks to the edma_probe
  dmaengine: fsl-dpaa2-qdma: Fix the size of dma pools
  dmaengine: at_hdmac: fix some kernel-doc warnings

Pull phy driver fixes from Vinod Koul:

 - TI null pointer dereference

 - missing erdes mux entry in lan966x driver

 - Return of error code in renesas driver

 - Serdes init sequence and register offsets for IPQ drivers

* tag 'phy-fixes-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
  phy: ti: phy-omap-usb2: Fix NULL pointer dereference for SRP
  phy: lan966x: Add missing serdes mux entry
  phy: renesas: rcar-gen3-usb2: Fix returning wrong error code
  phy: qcom-qmp-usb: fix serdes init sequence for IPQ6018
  phy: qcom-qmp-usb: fix register offsets for ipq8074/ipq6018

Merge tag 'i2c-host-fixes-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current

Just a maintenance patch that updates the repository where the
i2c host and muxes related patches will be collected.

Merge tag 'perf-tools-fixes-for-v6.8-1-2024-02-01' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tools fixes from Arnaldo Carvalho de Melo:
 "Vendor events:

   - Intel Alderlake/Sapphire Rapids metric fixes, the CPU type
     ("cpu_atom", "cpu_core") needs to be used as a prefix to be
     considered on a metric formula, detected via one of the 'perf test'
     entries.

  'perf test' fixes:

   - Fix the creation of event selector lists on 'perf test' entries, by
     initializing the sample ID flag, which is done by 'perf record', so
     this fix affects only the tests, the common case isn't affected

   - Make 'perf list' respect debug settings (-v) to fix its 'perf test'
     entry

   - Fix 'perf script' test when python support isn't enabled

   - Special case 'perf script' tests on s390, where only DWARF call
     graphs are supported and only on software events

   - Make 'perf daemon' signal test less racy

  Compiler warnings/errors:

   - Remove needless malloc(0) call in 'perf top' that triggers
     -Walloc-size

   - Fix calloc() argument order to address error introduced in gcc-14

  Build:

   - Make minimal shellcheck version to v0.6.0, avoiding the build to
     fail with older versions

  Sync kernel header copies:

   - stat.h to pick STATX_MNT_ID_UNIQUE

   - msr-index.h to pick IA32_MKTME_KEYID_PARTITIONING

   - drm.h to pick DRM_IOCTL_MODE_CLOSEFB

   - unistd.h to pick {list,stat}mount,
     lsm_{[gs]et_self_attr,list_modules} syscall numbers

   - x86 cpufeatures to pick TDX, Zen, APIC MSR fence changes

   - x86's mem{cpy,set}_64.S used in 'perf bench'

   - Also, without tooling effects: asm-generic/unaligned.h, mount.h,
     fcntl.h, kvm headers"

* tag 'perf-tools-fixes-for-v6.8-1-2024-02-01' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (21 commits)
  perf tools headers: update the asm-generic/unaligned.h copy with the kernel sources
  tools include UAPI: Sync linux/mount.h copy with the kernel sources
  perf evlist: Fix evlist__new_default() for > 1 core PMU
  tools headers: Update the copy of x86's mem{cpy,set}_64.S used in 'perf bench'
  tools headers x86 cpufeatures: Sync with the kernel sources to pick TDX, Zen, APIC MSR fence changes
  tools headers UAPI: Sync unistd.h to pick {list,stat}mount, lsm_{[gs]et_self_attr,list_modules} syscall numbers
  perf vendor events intel: Alderlake/sapphirerapids metric fixes
  tools headers UAPI: Sync kvm headers with the kernel sources
  perf tools: Fix calloc() arguments to address error introduced in gcc-14
  perf top: Remove needless malloc(0) call that triggers -Walloc-size
  perf build: Make minimal shellcheck version to v0.6.0
  tools headers UAPI: Update tools's copy of drm.h headers to pick DRM_IOCTL_MODE_CLOSEFB
  perf test shell daemon: Make signal test less racy
  perf test shell script: Fix test for python being disabled
  perf test: Workaround debug output in list test
  perf list: Add output file option
  perf list: Switch error message to pr_err() to respect debug settings (-v)
  perf test: Fix 'perf script' tests on s390
  tools headers UAPI: Sync linux/fcntl.h with the kernel sources
  tools arch x86: Sync the msr-index.h copy with the kernel sources to pick IA32_MKTME_KEYID_PARTITIONING
  ...

Pull tracing and eventfs fixes from Steven Rostedt:

 - Fix the return code for ring_buffer_poll_wait()

   It was returing a -EINVAL instead of EPOLLERR.

 - Zero out the tracefs_inode so that all fields are initialized.

   The ti->private could have had stale data, but instead of just
   initializing it to NULL, clear out the entire structure when it is
   allocated.

 - Fix a crash in timerlat

   The hrtimer was initialized at read and not open, but is canceled at
   close. If the file was opened and never read the close will pass a
   NULL pointer to hrtime_cancel().

 - Rewrite of eventfs.

   Linus wrote a patch series to remove the dentry references in the
   eventfs_inode and to use ref counting and more of proper VFS
   interfaces to make it work.

 - Add warning to put_ei() if ei is not set to free. That means
   something is about to free it when it shouldn't.

 - Restructure the eventfs_inode to make it more compact, and remove the
   unused llist field.

 - Remove the fsnotify*() funtions for when the inodes were being
   created in the lookup code. It doesn't make sense to notify about
   creation just because something is being looked up.

 - The inode hard link count was not accurate.

   It was being updated when a file was looked up. The inodes of
   directories were updating their parent inode hard link count every
   time the inode was created. That means if memory reclaim cleaned a
   stale directory inode and the inode was lookup up again, it would
   increment the parent inode again as well. Al Viro said to just have
   all eventfs directories have a hard link count of 1. That tells user
   space not to trust it.

* tag 'trace-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  eventfs: Keep all directory links at 1
  eventfs: Remove fsnotify*() functions from lookup()
  eventfs: Restructure eventfs_inode structure to be more condensed
  eventfs: Warn if an eventfs_inode is freed without is_freed being set
  tracing/timerlat: Move hrtimer_init to timerlat_fd open()
  eventfs: Get rid of dentry pointers without refcounts
  eventfs: Clean up dentry ops and add revalidate function
  eventfs: Remove unused d_parent pointer field
  tracefs: dentry lookup crapectomy
  tracefs: Avoid using the ei->dentry pointer unnecessarily
  eventfs: Initialize the tracefs inode properly
  tracefs: Zero out the tracefs_inode when allocating it
  ring-buffer: Clean ring_buffer_poll_wait() error return

Pull gfs2 revert from Andreas Gruenbacher:
 "It turns out that the commit to use GL_NOBLOCK flag for non-blocking
  lookups has several issues, and not all of them have a simple fix"

* tag 'gfs2-v6.8-rc2-revert' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  Revert "gfs2: Use GL_NOBLOCK flag for non-blocking lookups"

Pull pci fixes from Bjorn Helgaas:

 - Fix a potential deadlock that was reintroduced by an ASPM revert
   merged for v6.8 (Johan Hovold)

 - Add Manivannan Sadhasivam as PCI Endpoint maintainer (Lorenzo
   Pieralisi)

* tag 'pci-v6.8-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
  MAINTAINERS: Add Manivannan Sadhasivam as PCI Endpoint maintainer
  PCI/ASPM: Fix deadlock when enabling ASPM

Pul drm fixes from Dave Airlie:
 "Regular weekly fixes, mostly amdgpu and xe. One nouveau fix is a
  better fix for the deadlock and also helps with a sync race we were
  seeing.

  dma-buf:
   - heaps CMA page accounting fix

  virtio-gpu:
   - fix segment size

  xe:
   - A crash fix
   - A fix for an assert due to missing mem_acces ref
   - Only allow a single user-fence per exec / bind.
   - Some sparse warning fixes
   - Two fixes for compilation failures on various odd combinations of
     gcc / arch pointed out on LKML.
   - Fix a fragile partial allocation pointed out on LKML.
   - A sysfs ABI documentation warning fix

  amdgpu:
   - Fix reboot issue seen on some 7000 series dGPUs
   - Fix client init order for KFD
   - Misc display fixes
   - USB-C fix
   - DCN 3.5 fixes
   - Fix issues with GPU scheduler and GPU reset
   - GPU firmware loading fix
   - Misc fixes
   - GC 11.5 fix
   - VCN 4.0.5 fix
   - IH overflow fix

  amdkfd:
   - SVM fixes
   - Trap handler fix
   - Fix device permission lookup
   - Properly reserve BO before validating it

  nouveau:
   - fence/irq lock deadlock fix (second attempt)
   - gsp command size fix

* tag 'drm-fixes-2024-02-03' of git://anongit.freedesktop.org/drm/drm: (35 commits)
  nouveau: offload fence uevents work to workqueue
  nouveau/gsp: use correct size for registry rpc.
  drm/amdgpu/pm: Use inline function for IP version check
  drm/hwmon: Fix abi doc warnings
  drm/xe: Make all GuC ABI shift values unsigned
  drm/xe/vm: Subclass userptr vmas
  drm/xe: Use LRC prefix rather than CTX prefix in lrc desc defines
  drm/xe: Don't use __user error pointers
  drm/xe: Annotate mcr_[un]lock()
  drm/xe: Only allow 1 ufence per exec / bind IOCTL
  drm/xe: Grab mem_access when disabling C6 on skip_guc_pc platforms
  drm/xe: Fix crash in trace_dma_fence_init()
  drm/amdgpu: Reset IH OVERFLOW_CLEAR bit
  drm/amdgpu: remove asymmetrical irq disabling in vcn 4.0.5 suspend
  drm/amdgpu: drm/amdgpu: remove golden setting for gfx 11.5.0
  drm/amdkfd: reserve the BO before validating it
  drm/amdgpu: Fix missing error code in 'gmc_v6/7/8/9_0_hw_init()'
  drm/amd/display: Fix buffer overflow in 'get_host_router_total_dp_tunnel_bw()'
  drm/amd/display: Add NULL check for kzalloc in 'amdgpu_dm_atomic_commit_tail()'
  drm/amd: Don't init MEC2 firmware when it fails to load
  ...

Pull input fixes from Dmitry Torokhov:

 - a fix for the fix to deal with newer laptops which get confused by
   the "GET ID" command when probing for PS/2 keyboards

 - a couple of tweaks to i8042 to handle Clevo NS70PU and Lifebook U728
   laptops

 - a change to bcm5974 to validate that the device has appropriate
   endpoints

 - an addition of new product ID to xpad driver to recognize Lenovo
   Legion Go controllers

 - a quirk to Goodix controller to deal with extra GPIO described in
   ACPI tables on some devices.

* tag 'input-for-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: i8042 - add Fujitsu Lifebook U728 to i8042 quirk table
  Input: i8042 - fix strange behavior of touchpad on Clevo NS70PU
  Input: atkbd - do not skip atkbd_deactivate() when skipping ATKBD_CMD_GETID
  Input: atkbd - skip ATKBD_CMD_SETLEDS when skipping ATKBD_CMD_GETID
  Input: bcm5974 - check endpoint type before starting traffic
  Input: xpad - add Lenovo Legion Go controllers
  Input: goodix - accept ACPI resources with gpio_count == 3 && gpio_int_idx == 0

Pull sound fixes from Takashi Iwai:
 "A collection of fixes, mostly device-specific ones:

   - Minor PCM core fix for name strings

   - ASoC Qualcomm fixes, including DAI support extensions

   - ASoC AMD platform updates

   - ASoC Allwinner platform updates

   - Various ASoC codec fixes for WSA, WCD, ES8326 drivers

   - Various HD-audio and USB-audio fixes and quirks

   - A series of fixes for Cirrus CS35L56 codecs"

* tag 'sound-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (63 commits)
  ALSA: usb-audio: Ignore clock selector errors for single connection
  ALSA: hda/realtek: Enable headset mic on Vaio VJFE-ADL
  ALSA: hda: cs35l56: Remove unused test stub function
  ALSA: hda: cs35l56: Firmware file must match the version of preloaded firmware
  ALSA: hda: cs35l56: Fix filename string field layout
  ALSA: hda: cs35l56: Fix order of searching for firmware files
  ASoC: cs35l56: Allow more time for firmware to boot
  ASoC: cs35l56: Load tunings for the correct speaker models
  ASoC: cs35l56: Firmware file must match the version of preloaded firmware
  ASoC: cs35l56: Fix misuse of wm_adsp 'part' string for silicon revision
  ASoC: cs35l56: Fix for initializing ASP1 mixer registers
  ALSA: hda: cs35l56: Initialize all ASP1 registers
  ASoC: cs35l56: Fix default SDW TX mixer registers
  ASoC: cs35l56: Fix to ensure ASP1 registers match cache
  ASoC: cs35l56: Remove buggy checks from cs35l56_is_fw_reload_needed()
  ASoC: cs35l56: Don't add the same register patch multiple times
  ASoC: cs35l56: cs35l56_component_remove() must clean up wm_adsp
  ASoC: cs35l56: cs35l56_component_remove() must clear cs35l56->component
  ASoC: wm_adsp: Don't overwrite fwf_name with the default
  ASoC: wm_adsp: Fix firmware file search order
  ...