Skip to content

L
linux
Switch branch/tag
  1. 03 Dec, 2021 4 commits
  3. 25 Nov, 2021 4 commits
  5. 24 Nov, 2021 16 commits
  7. 23 Nov, 2021 14 commits
    • Jakub Kicinski's avatar
      net: remove .ndo_change_proto_down · 2106efda
      Jakub Kicinski authored 
      .ndo_change_proto_down was added seemingly to enable out-of-tree
implementations. Over 2.5yrs later we still have no real users
upstream. Hardwire the generic implementation for now, we can
revert once real users materialize. (rocker is a test vehicle,
not a user.)

We need to drop the optimization on the sysfs side, because
unlike ndos priv_flags will be changed at runtime, so we'd
need READ_ONCE/WRITE_ONCE everywhere..
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2106efda
    • David S. Miller's avatar
      Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue · c384cee1
      David S. Miller authored 
      Tony Nguyen says:

====================
100GbE Intel Wired LAN Driver Updates 2021-11-22

Shiraz Saleem says:

Currently E800 devices come up as RoCEv2 devices by default.

This series add supports for users to configure iWARP or RoCEv2 functionality
per PCI function. devlink parameters is used to realize this and is keyed
off similar work in [1].

[1] https://lore.kernel.org/linux-rdma/20210810132424.9129-1-parav@nvidia.com/
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c384cee1
    • David S. Miller's avatar
      Merge branch 'mvpp2-5gbase-r-support' · 5f11542f
      David S. Miller authored 
      Marek Behún says:

====================
Add 5gbase-r support for mvpp2

this adds support for 5gbase-r for mvpp2 driver. Current versions of
TF-A firmware support changing the PHY to 5gbase-r via SMC calls, at
least on Macchiatobin.

Tested on Macchiatobin.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5f11542f
    • Marek Behún's avatar
      net: marvell: mvpp2: Add support for 5gbase-r · 4043ec70
      Marek Behún authored 
      Add support for PHY_INTERFACE_MODE_5GBASER.
Signed-off-by: default avatarMarek Behún <kabel@kernel.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4043ec70
    • Marek Behún's avatar
      phy: marvell: phy-mvebu-cp110-comphy: add support for 5gbase-r · a1fb410a
      Marek Behún authored 
      Add support for PHY_INTERFACE_MODE_5GBASER mode within the Marvell CP110
common PHY driver.

This is currently only supported via SMC calls to TF-A. Legacy support
may be added later, if needed.
Signed-off-by: default avatarMarek Behún <kabel@kernel.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a1fb410a
    • Gerhard Engleder's avatar
      tsnep: Fix set MAC address · 75e47206
      Gerhard Engleder authored 
      Commit 4dfb9982 ("tsn:  Fix build.") fixed compilation with const
dev_addr. In tsnep_netdev_set_mac_address() the call of ether_addr_copy()
was replaced with dev_set_mac_address(), which calls
ndo_set_mac_address(). This results in an endless recursive loop because
ndo_set_mac_address is set to tsnep_netdev_set_mac_address.

Call eth_hw_addr_set() instead of dev_set_mac_address() in
ndo_set_mac_address()/tsnep_netdev_set_mac_address() to copy the address
as intended.

[   26.563303] Insufficient stack space to handle exception!
[   26.563312] ESR: 0x96000047 -- DABT (current EL)
[   26.563317] FAR: 0xffff80000a507fc0
[   26.563320] Task stack:     [0xffff80000a508000..0xffff80000a50c000]
[   26.563324] IRQ stack:      [0xffff80000a0c0000..0xffff80000a0c4000]
[   26.563327] Overflow stack: [0xffff00007fbaf2b0..0xffff00007fbb02b0]
[   26.563333] CPU: 3 PID: 381 Comm: ifconfig Not tainted 5.16.0-rc1-zynqmp #60
[   26.563340] Hardware name: TSN endpoint (DT)
[   26.563343] pstate: a0000005 (NzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[   26.563351] pc : inetdev_event+0x4/0x560
[   26.563364] lr : raw_notifier_call_chain+0x54/0x78
[   26.563372] sp : ffff80000a508040
[   26.563374] x29: ffff80000a508040 x28: ffff00000132b800 x27: 0000000000000000
[   26.563386] x26: 0000000000000000 x25: ffff800000ea5058 x24: 0904030201020001
[   26.563396] x23: ffff800000ea5058 x22: ffff80000a5080e0 x21: 0000000000000009
[   26.563405] x20: 00000000fffffffa x19: ffff80000a009510 x18: 0000000000000000
[   26.563414] x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffd1341030
[   26.563422] x14: ffffffffffffffff x13: 0000000000000020 x12: 0101010101010101
[   26.563432] x11: 0000000000000020 x10: 0101010101010101 x9 : 7f7f7f7f7f7f7f7f
[   26.563441] x8 : 7f7f7f7f7f7f7f7f x7 : fefefeff30677364 x6 : 0000000080808080
[   26.563450] x5 : 0000000000000000 x4 : ffff800008dee170 x3 : ffff80000a50bd42
[   26.563459] x2 : ffff80000a5080e0 x1 : 0000000000000009 x0 : ffff80000a0092d0
[   26.563470] Kernel panic - not syncing: kernel stack overflow
[   26.563474] CPU: 3 PID: 381 Comm: ifconfig Not tainted 5.16.0-rc1-zynqmp #60
[   26.563481] Hardware name: TSN endpoint (DT)
[   26.563484] Call trace:
[   26.563486]  dump_backtrace+0x0/0x1b0
[   26.563497]  show_stack+0x18/0x68
[   26.563504]  dump_stack_lvl+0x68/0x84
[   26.563513]  dump_stack+0x18/0x34
[   26.563519]  panic+0x164/0x324
[   26.563524]  nmi_panic+0x64/0x98
[   26.563533]  panic_bad_stack+0x108/0x128
[   2k6.563539]  handle_bad_stack+0x38/0x68
[   26.563548]  __bad_stack+0x88/0x8c
[   26.563553]  inetdev_event+0x4/0x560
[   26.563560]  call_netdevice_notifiers_info+0x58/0xa8
[   26.563569]  dev_set_mac_address+0x78/0x110
[   26.563576]  tsnep_netdev_set_mac_address+0x38/0x60 [tsnep]
[   26.563591]  dev_set_mac_address+0xc4/0x110
[   26.563599]  tsnep_netdev_set_mac_address+0x38/0x60 [tsnep]
...
[   26.565444]  dev_set_mac_address+0xc4/0x110
[   26.565452]  tsnep_netdev_set_mac_address+0x38/0x60 [tsnep]
[   26.565462]  dev_set_mac_address+0xc4/0x110
[   26.565469]  dev_set_mac_address_user+0x44/0x68
[   26.565477]  dev_ifsioc+0x30c/0x568
[   26.565483]  dev_ioctl+0x124/0x3f0
[   26.565489]  sock_do_ioctl+0xb4/0xf8
[   26.565497]  sock_ioctl+0x2f4/0x398
[   26.565503]  __arm64_sys_ioctl+0xa8/0xe8
[   26.565511]  invoke_syscall+0x44/0x108
[   26.565520]  el0_svc_common.constprop.3+0x94/0xf8
[   26.565527]  do_el0_svc+0x24/0x88
[   26.565534]  el0_svc+0x20/0x50
[   26.565541]  el0t_64_sync_handler+0x90/0xb8
[   26.565548]  el0t_64_sync+0x180/0x184
[   26.565556] SMP: stopping secondary CPUs
[   26.565622] Kernel Offset: disabled
[   26.565624] CPU features: 0x0,00004002,00000846
[   26.565628] Memory Limit: none
[   27.843428] ---[ end Kernel panic - not syncing: kernel stack overflow ]---

Fixes: 4dfb9982 ("tsn:  Fix build.")
Signed-off-by: default avatarGerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      75e47206
    • David S. Miller's avatar
      Merge branch 'qca8k-mirror-and-lag-support' · 33e2ec52
      David S. Miller authored 
      Ansuel Smith says:

====================
Add mirror and LAG support to qca8k

With the continue of adding 'Multiple feature to qca8k'

The switch supports mirror mode and LAG.
In mirror mode a port is set as mirror and other port are configured
to both igress or egress mode. With no port configured for mirror,
the mirror port is disabled and reverted to normal port.

The switch supports max 4 LAG with 4 different member max.
Current supported mode is Hash mode in both L2 or L2+3 mode.
There is a problematic implementation for the hash mode where
with multiple LAG configured, someone has to remove them to
change the hash mode as it's global.
When a member of the LAG is disconnected, the traffic is redirected
to the other port.

Some warning are present from checkpatch but can't really be fixed
as it would result in making the regs less readable.
(They really did their best with the LAG reg logic and complexity)
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      33e2ec52
    • Ansuel Smith's avatar
      net: dsa: qca8k: add LAG support · def97530
      Ansuel Smith authored 
      Add LAG support to this switch. In Documentation this is described as
trunk mode. A max of 4 LAGs are supported and each can support up to 4
port. The current tx mode supported is Hash mode with both L2 and L2+3
mode.
When no port are present in the trunk, the trunk is disabled in the
switch.
When a port is disconnected, the traffic is redirected to the other
available port.
The hash mode is global and each LAG require to have the same hash mode
set. To change the hash mode when multiple LAG are configured, it's
required to remove each LAG and set the desired hash mode to the last.
An error is printed when it's asked to set a not supported hadh mode.
Signed-off-by: default avatarAnsuel Smith <ansuelsmth@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      def97530
    • Ansuel Smith's avatar
      net: dsa: qca8k: add support for mirror mode · 2c1bdbc7
      Ansuel Smith authored 
      The switch supports mirror mode. Only one port can set as mirror port and
every other port can set to both ingress and egress mode. The mirror
port is disabled and reverted to normal operation once every port is
removed from sending packet to it.
Signed-off-by: default avatarAnsuel Smith <ansuelsmth@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2c1bdbc7
    • Yajun Deng's avatar
      neigh: introduce neigh_confirm() helper function · 1e84dc6b
      Yajun Deng authored 
      Add neigh_confirm() for the confirmed member in struct neighbour,
it can be called as an independent unit by other functions.
Signed-off-by: default avatarYajun Deng <yajun.deng@linux.dev>
Reviewed-by: default avatarEric Dumazet <edumazet@google.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1e84dc6b
    • Jeremy Kerr's avatar
      mctp: Add MCTP-over-serial transport binding · a0c2ccd9
      Jeremy Kerr authored 
      This change adds a MCTP Serial transport binding, as defined by DMTF
specificiation DSP0253 - "MCTP Serial Transport Binding". This is
implemented as a new serial line discipline, and can be attached to
arbitrary tty devices.

From the Kconfig description:

  This driver provides an MCTP-over-serial interface, through a
  serial line-discipline, as defined by DMTF specification "DSP0253 -
  MCTP Serial Transport Binding". By attaching the ldisc to a serial
  device, we get a new net device to transport MCTP packets.

  This allows communication with external MCTP endpoints which use
  serial as their transport. It can also be used as an easy way to
  provide MCTP connectivity between virtual machines, by forwarding
  data between simple virtual serial devices.

  Say y here if you need to connect to MCTP endpoints over serial. To
  compile as a module, use m; the module will be called mctp-serial.

Once the N_MCTP line discipline is set [using ioctl(TCIOSETD)], we get a
new netdev suitable for MCTP communication.

The 'mctp' utility[1] provides a simple wrapper for this ioctl, using
'link serial <device>':

  # mctp link serial /dev/ttyS0 &
  # mctp link
  dev lo index 1 address 0x00:00:00:00:00:00 net 1 mtu 65536 up
  dev mctpserial0 index 5 address 0x(no-addr) net 1 mtu 68 down

[1]: https://github.com/CodeConstruct/mctpSigned-off-by: default avatarJeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a0c2ccd9
    • David S. Miller's avatar
      Merge branch 'mlxsw-updates' · 25e2735d
      David S. Miller authored 
      Ido Schimmel says:

====================
mlxsw: Various updates

Patch #1 removes deadcode reported by Coverity.

Patch #2 adds a shutdown method in the PCI driver to ensure the kexeced
kernel starts working with a device that is in a sane state.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      25e2735d
    • Danielle Ratson's avatar
      mlxsw: pci: Add shutdown method in PCI driver · c1020d3c
      Danielle Ratson authored 
      On an arm64 platform with the Spectrum ASIC, after loading and executing
a new kernel via kexec, the following trace [1] is observed. This seems
to be caused by the fact that the device is not properly shutdown before
executing the new kernel.

Fix this by implementing a shutdown method which mirrors the remove
method, as recommended by the kexec maintainer [2][3].

[1]
BUG: Bad page state in process devlink pfn:22f73d
page:fffffe00089dcf40 refcount:-1 mapcount:0 mapping:0000000000000000 index:0x0
flags: 0x2ffff00000000000()
raw: 2ffff00000000000 0000000000000000 ffffffff089d0201 0000000000000000
raw: 0000000000000000 0000000000000000 ffffffffffffffff 0000000000000000
page dumped because: nonzero _refcount
Modules linked in:
CPU: 1 PID: 16346 Comm: devlink Tainted: G B 5.8.0-rc6-custom-273020-gac6b365b1bf5 #44
Hardware name: Marvell Armada 7040 TX4810M (DT)
Call trace:
 dump_backtrace+0x0/0x1d0
 show_stack+0x1c/0x28
 dump_stack+0xbc/0x118
 bad_page+0xcc/0xf8
 check_free_page_bad+0x80/0x88
 __free_pages_ok+0x3f8/0x418
 __free_pages+0x38/0x60
 kmem_freepages+0x200/0x2a8
 slab_destroy+0x28/0x68
 slabs_destroy+0x60/0x90
 ___cache_free+0x1b4/0x358
 kfree+0xc0/0x1d0
 skb_free_head+0x2c/0x38
 skb_release_data+0x110/0x1a0
 skb_release_all+0x2c/0x38
 consume_skb+0x38/0x130
 __dev_kfree_skb_any+0x44/0x50
 mlxsw_pci_rdq_fini+0x8c/0xb0
 mlxsw_pci_queue_fini.isra.0+0x28/0x58
 mlxsw_pci_queue_group_fini+0x58/0x88
 mlxsw_pci_aqs_fini+0x2c/0x60
 mlxsw_pci_fini+0x34/0x50
 mlxsw_core_bus_device_unregister+0x104/0x1d0
 mlxsw_devlink_core_bus_device_reload_down+0x2c/0x48
 devlink_reload+0x44/0x158
 devlink_nl_cmd_reload+0x270/0x290
 genl_rcv_msg+0x188/0x2f0
 netlink_rcv_skb+0x5c/0x118
 genl_rcv+0x3c/0x50
 netlink_unicast+0x1bc/0x278
 netlink_sendmsg+0x194/0x390
 __sys_sendto+0xe0/0x158
 __arm64_sys_sendto+0x2c/0x38
 el0_svc_common.constprop.0+0x70/0x168
 do_el0_svc+0x28/0x88
 el0_sync_handler+0x88/0x190
 el0_sync+0x140/0x180

[2]
https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg1195432.html

[3]
https://patchwork.kernel.org/project/linux-scsi/patch/20170212214920.28866-1-anton@ozlabs.org/#20116693

Cc: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: default avatarDanielle Ratson <danieller@nvidia.com>
Signed-off-by: default avatarIdo Schimmel <idosch@nvidia.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c1020d3c
    • Danielle Ratson's avatar
      mlxsw: spectrum_router: Remove deadcode in mlxsw_sp_rif_mac_profile_find · ed1607e2
      Danielle Ratson authored 
      The function idr_for_each_entry() already checks that the next entry in
the IDR is not NULL.

Therefore, checking that again in every iteration leads to deadcode.

Remove the unnecessary check in order to avoid that.

Addresses-Coverity: ("Logically dead code")
Signed-off-by: default avatarDanielle Ratson <danieller@nvidia.com>
Signed-off-by: default avatarIdo Schimmel <idosch@nvidia.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ed1607e2
  9. 22 Nov, 2021 2 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7