- 20 Apr, 2019 3 commits
-
-
ZhangXiaoxu authored
[ Upstream commit 62c9d267 ] Commit 4d97f7d5 ("inotify: Add flag IN_MASK_CREATE for inotify_add_watch()") forgot to call fsnotify_put_mark() with IN_MASK_CREATE after fsnotify_find_mark() Fixes: 4d97f7d5 ("inotify: Add flag IN_MASK_CREATE for inotify_add_watch()") Signed-off-by:
ZhangXiaoxu <zhangxiaoxu5@huawei.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Corentin Labbe authored
[ Upstream commit 0728aeb7 ] We have now a HSDK device in our kernelci lab, but kernel builded via the hsdk_defconfig lacks ramfs supports, so it cannot boot kernelci jobs yet. So this patch enable CONFIG_BLK_DEV_RAM in hsdk_defconfig. Signed-off-by:
Corentin Labbe <clabbe@baylibre.com> Acked-by:
Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Eugeniy Paltsev authored
[ Upstream commit edb64bca ] In case of devboards we really often disable bootloader and load Linux image in memory via JTAG. Even if kernel tries to verify uboot_tag and uboot_arg there is sill a chance that we treat some garbage in registers as valid u-boot arguments in JTAG case. E.g. it is enough to have '1' in r0 to treat any value in r2 as a boot command line. So check that magic number passed from u-boot is correct and drop u-boot arguments otherwise. That helps to reduce the possibility of using garbage as u-boot arguments in JTAG case. We can safely check U-boot magic value (0x0) in linux passed via r1 register as U-boot pass it from the beginning. So there is no backward-compatibility issues. Signed-off-by:
Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by:
-
- 17 Apr, 2019 37 commits
-
-
Greg Kroah-Hartman authored
-
Marc Orr authored
commit c73f4c99 upstream. Referring to the "VIRTUALIZING MSR-BASED APIC ACCESSES" chapter of the SDM, when "virtualize x2APIC mode" is 1 and "APIC-register virtualization" is 0, a RDMSR of 808H should return the VTPR from the virtual APIC page. However, for nested, KVM currently fails to disable the read intercept for this MSR. This means that a RDMSR exit takes precedence over "virtualize x2APIC mode", and KVM passes through L1's TPR to L2, instead of sourcing the value from L2's virtual APIC page. This patch fixes the issue by disabling the read intercept, in VMCS02, for the VTPR when "APIC-register virtualization" is 0. The issue described above and fix prescribed here, were verified with a related patch in kvm-unit-tests titled "Test VMX's virtualize x2APIC mode w/ nested". Signed-off-by:
Marc Orr <marcorr@google.com> Reviewed-by:
Jim Mattson <jmattson@google.com> Fixes: c992384b ("KVM: vmx: speed up MSR bitmap merge") Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Marc Orr authored
commit acff7847 upstream. The nested_vmx_prepare_msr_bitmap() function doesn't directly guard the x2APIC MSR intercepts with the "virtualize x2APIC mode" MSR. As a result, we discovered the potential for a buggy or malicious L1 to get access to L0's x2APIC MSRs, via an L2, as follows. 1. L1 executes WRMSR(IA32_SPEC_CTRL, 1). This causes the spec_ctrl variable, in nested_vmx_prepare_msr_bitmap() to become true. 2. L1 disables "virtualize x2APIC mode" in VMCS12. 3. L1 enables "APIC-register virtualization" in VMCS12. Now, KVM will set VMCS02's x2APIC MSR intercepts from VMCS12, and then set "virtualize x2APIC mode" to 0 in VMCS02. Oops. This patch closes the leak by explicitly guarding VMCS02's x2APIC MSR intercepts with VMCS12's "virtualize x2APIC mode" control. The scenario outlined above and fix prescribed here, were verified with a related patch in kvm-unit-tests titled "Add leak scenario to virt_x2apic_mode_test". Note, it looks like this issue may have been introduced inadvertently during a merge---see 15303ba5. Signed-off-by:
-
Erik Schmauss authored
commit 4abb951b upstream. The table load process omitted adding the operation region address range to the global list. This omission is problematic because the OS queries the global list to check for address range conflicts before deciding which drivers to load. This commit may result in warning messages that look like the following: [ 7.871761] ACPI Warning: system_IO range 0x00000428-0x0000042F conflicts with op_region 0x00000400-0x0000047F (\PMIO) (20180531/utaddress-213) [ 7.871769] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver However, these messages do not signify regressions. It is a result of properly adding address ranges within the global address list. Link: https://bugzilla.kernel.org/show_bug.cgi?id=200011Tested-by:
Jean-Marc Lenoir <archlinux@jihemel.com> Signed-off-by:
Erik Schmauss <erik.schmauss@intel.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Tomohiro Mayama authored
commit a8772e5d upstream. This patch makes USB ports functioning again. Fixes: 955bebde ("arm64: dts: rockchip: add rk3328-rock64 board") Cc: stable@vger.kernel.org Suggested-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
Tomohiro Mayama <parly-gh@iris.mystia.org> Tested-by:
Katsuhiro Suzuki <katsuhiro@katsuster.net> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Katsuhiro Suzuki authored
commit ef05bcb6 upstream. This patch fixes pin assign of vcc_host1_5v. This regulator is controlled by USB20_HOST_DRV signal. ROCK64 schematic says that GPIO0_A2 pin is used as USB20_HOST_DRV. GPIO0_D3 pin is for SPDIF_TX_M0. Signed-off-by:
-
Mikulas Patocka authored
commit 4ed319c6 upstream. dm-integrity will deadlock if overlapping I/O is issued to it, the bug was introduced by commit 724376a0 ("dm integrity: implement fair range locks"). Users rarely use overlapping I/O so this bug went undetected until now. Fix this bug by correcting, likely cut-n-paste, typos in ranges_overlap() and also remove a flawed ranges_overlap() check in remove_range_unlocked(). This condition could leave unprocessed bios hanging on wait_list forever. Cc: stable@vger.kernel.org # v4.19+ Fixes: 724376a0 ("dm integrity: implement fair range locks") Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Ilya Dryomov authored
commit eb40c0ac upstream. Some devices don't use blk_integrity but still want stable pages because they do their own checksumming. Examples include rbd and iSCSI when data digests are negotiated. Stacking DM (and thus LVM) on top of these devices results in sporadic checksum errors. Set BDI_CAP_STABLE_WRITES if any underlying device has it set. Cc: stable@vger.kernel.org Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Mikulas Patocka authored
commit 75ae1936 upstream. The limit was already incorporated to dm-crypt with commit 4e870e94 ("dm crypt: fix error with too large bios"), so we don't need to apply it globally to all targets. The quantity BIO_MAX_PAGES * PAGE_SIZE is wrong anyway because the variable ti->max_io_len it is supposed to be in the units of 512-byte sectors not in bytes. Reduction of the limit to 1048576 sectors could even cause data corruption in rare cases - suppose that we have a dm-striped device with stripe size 768MiB. The target will call dm_set_target_max_io_len with the value 1572864. The buggy code would reduce it to 1048576. Now, the dm-core will errorneously split the bios on 1048576-sector boundary insetad of 1572864-sector boundary and pass these stripe-crossing bios to the striped target. Cc: stable@vger.kernel.org # v4.16+ Fixes: 8f50e358 ("dm: limit the max bio size as BIO_MAX_PAGES * PAGE_SIZE") Signed-off-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
-
Mikulas Patocka authored
commit 0d74e6a3 upstream. If the string opt_string is small, the function memcmp can access bytes that are beyond the terminating nul character. In theory, it could cause segfault, if opt_string were located just below some unmapped memory. Change from memcmp to strncmp so that we don't read bytes beyond the end of the string. Cc: stable@vger.kernel.org # v4.12+ Signed-off-by:
-
Sergey Miroshnichenko authored
commit 3943af9d upstream. During a safe hot remove, the OS powers off the slot, which may cause a Data Link Layer State Changed event. The slot has already been set to OFF_STATE, so that event results in re-enabling the device, making it impossible to safely remove it. Clear out the Presence Detect Changed and Data Link Layer State Changed events when the disabled slot has settled down. It is still possible to re-enable the device if it remains in the slot after pressing the Attention Button by pressing it again. Fixes the problem that Micah reported below: an NVMe drive power button may not actually turn off the drive. Link: https://bugzilla.kernel.org/show_bug.cgi?id=203237Reported-by:
Micah Parrish <micah.parrish@hpe.com> Tested-by:
Sergey Miroshnichenko <s.miroshnichenko@yadro.com> [bhelgaas: changelog, add bugzilla URL] Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-by:
Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org # v4.19+ Signed-off-by:
-
Andre Przywara authored
commit 9cde402a upstream. There is a Marvell 88SE9170 PCIe SATA controller I found on a board here. Some quick testing with the ARM SMMU enabled reveals that it suffers from the same requester ID mixup problems as the other Marvell chips listed already. Add the PCI vendor/device ID to the list of chips which need the workaround. Signed-off-by:
Andre Przywara <andre.przywara@arm.com> Signed-off-by:
-
Lendacky, Thomas authored
commit 3966c3fe upstream. Spurious interrupt support was added to perf in the following commit, almost a decade ago: 63e6be6d ("perf, x86: Catch spurious interrupts after disabling counters") The two previous patches (resolving the race condition when disabling a PMC and NMI latency mitigation) allow for the removal of this older spurious interrupt support. Currently in x86_pmu_stop(), the bit for the PMC in the active_mask bitmap is cleared before disabling the PMC, which sets up a race condition. This race condition was mitigated by introducing the running bitmap. That race condition can be eliminated by first disabling the PMC, waiting for PMC reset on overflow and then clearing the bit for the PMC in the active_mask bitmap. The NMI handler will not re-enable a disabled counter. If x86_pmu_stop() is called from the perf NMI handler, the NMI latency mitigation support will guard against any unhandled NMI messages. Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <stable@vger.kernel.org> # 4.14.x- Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: https://lkml.kernel.org/r/Message-ID: Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Lendacky, Thomas authored
commit 6d3edaae upstream. On AMD processors, the detection of an overflowed PMC counter in the NMI handler relies on the current value of the PMC. So, for example, to check for overflow on a 48-bit counter, bit 47 is checked to see if it is 1 (not overflowed) or 0 (overflowed). When the perf NMI handler executes it does not know in advance which PMC counters have overflowed. As such, the NMI handler will process all active PMC counters that have overflowed. NMI latency in newer AMD processors can result in multiple overflowed PMC counters being processed in one NMI and then a subsequent NMI, that does not appear to be a back-to-back NMI, not finding any PMC counters that have overflowed. This may appear to be an unhandled NMI resulting in either a panic or a series of messages, depending on how the kernel was configured. To mitigate this issue, add an AMD handle_irq callback function, amd_pmu_handle_irq(), that will invoke the common x86_pmu_handle_irq() function and upon return perform some additional processing that will indicate if the NMI has been handled or would have been handled had an earlier NMI not handled the overflowed PMC. Using a per-CPU variable, a minimum value of the number of active PMCs or 2 will be set whenever a PMC is active. This is used to indicate the possible number of NMIs that can still occur. The value of 2 is used for when an NMI does not arrive at the LAPIC in time to be collapsed into an already pending NMI. Each time the function is called without having handled an overflowed counter, the per-CPU value is checked. If the value is non-zero, it is decremented and the NMI indicates that it handled the NMI. If the value is zero, then the NMI indicates that it did not handle the NMI. Signed-off-by:
-
Lendacky, Thomas authored
commit 914123fa upstream. On AMD processors, the detection of an overflowed counter in the NMI handler relies on the current value of the counter. So, for example, to check for overflow on a 48 bit counter, bit 47 is checked to see if it is 1 (not overflowed) or 0 (overflowed). There is currently a race condition present when disabling and then updating the PMC. Increased NMI latency in newer AMD processors makes this race condition more pronounced. If the counter value has overflowed, it is possible to update the PMC value before the NMI handler can run. The updated PMC value is not an overflowed value, so when the perf NMI handler does run, it will not find an overflowed counter. This may appear as an unknown NMI resulting in either a panic or a series of messages, depending on how the kernel is configured. To eliminate this race condition, the PMC value must be checked after disabling the counter. Add an AMD function, amd_pmu_disable_all(), that will wait for the NMI handler to reset any active and overflowed counter after calling x86_pmu_disable_all(). Signed-off-by:
-
Alexander Potapenko authored
commit 5b77e95d upstream. There's a number of problems with how arch/x86/include/asm/bitops.h is currently using assembly constraints for the memory region bitops are modifying: 1) Use memory clobber in bitops that touch arbitrary memory Certain bit operations that read/write bits take a base pointer and an arbitrarily large offset to address the bit relative to that base. Inline assembly constraints aren't expressive enough to tell the compiler that the assembly directive is going to touch a specific memory location of unknown size, therefore we have to use the "memory" clobber to indicate that the assembly is going to access memory locations other than those listed in the inputs/outputs. To indicate that BTR/BTS instructions don't necessarily touch the first sizeof(long) bytes of the argument, we also move the address to assembly inputs. This particular change leads to size increase of 124 kernel functions in a defconfig build. For some of them the diff is in NOP operations, other end up re-reading values from memory and may potentially slow down the execution. But without these clobbers the compiler is free to cache the contents of the bitmaps and use them as if they weren't changed by the inline assembly. 2) Use byte-sized arguments for operations touching single bytes. Passing a long value to ANDB/ORB/XORB instructions makes the compiler treat sizeof(long) bytes as being clobbered, which isn't the case. This may theoretically lead to worse code in the case of heavy optimization. Practical impact: I've built a defconfig kernel and looked through some of the functions generated by GCC 7.3.0 with and without this clobber, and didn't spot any miscompilations. However there is a (trivial) theoretical case where this code leads to miscompilation: https://lkml.org/lkml/2019/3/28/393 using just GCC 8.3.0 with -O2. It isn't hard to imagine someone writes such a function in the kernel someday. So the primary motivation is to fix an existing misuse of the asm directive, which happens to work in certain configurations now, but isn't guaranteed to work under different circumstances. [ --mingo: Added -stable tag because defconfig only builds a fraction of the kernel and the trivial testcase looks normal enough to be used in existing or in-development code. ] Signed-off-by:
Alexander Potapenko <glider@google.com> Cc: <stable@vger.kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: James Y Knight <jyknight@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20190402112813.193378-1-glider@google.com [ Edited the changelog, tidied up one of the defines. ] Signed-off-by:
-
Rasmus Villemoes authored
commit 88ca66d8 upstream. The minimum supported gcc version is >= 4.6, so these can be removed. Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20190111084931.24601-1-linux@rasmusvillemoes.dkSigned-off-by:
-
Max Filippov authored
commit ada770b1 upstream. return_address returns the address that is one level higher in the call stack than requested in its argument, because level 0 corresponds to its caller's return address. Use requested level as the number of stack frames to skip. This fixes the address reported by might_sleep and friends. Cc: stable@vger.kernel.org Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
-
Mel Gorman authored
commit 0e9f0245 upstream. A NULL pointer dereference bug was reported on a distribution kernel but the same issue should be present on mainline kernel. It occured on s390 but should not be arch-specific. A partial oops looks like: Unable to handle kernel pointer dereference in virtual kernel address space ... Call Trace: ... try_to_wake_up+0xfc/0x450 vhost_poll_wakeup+0x3a/0x50 [vhost] __wake_up_common+0xbc/0x178 __wake_up_common_lock+0x9e/0x160 __wake_up_sync_key+0x4e/0x60 sock_def_readable+0x5e/0x98 The bug hits any time between 1 hour to 3 days. The dereference occurs in update_cfs_rq_h_load when accumulating h_load. The problem is that cfq_rq->h_load_next is not protected by any locking and can be updated by parallel calls to task_h_load. Depending on the compiler, code may be generated that re-reads cfq_rq->h_load_next after the check for NULL and then oops when reading se->avg.load_avg. The dissassembly showed that it was possible to reread h_load_next after the check for NULL. While this does not appear to be an issue for later compilers, it's still an accident if the correct code is generated. Full locking in this path would have high overhead so this patch uses READ_ONCE to read h_load_next only once and check for NULL before dereferencing. It was confirmed that there were no further oops after 10 days of testing. As Peter pointed out, it is also necessary to use WRITE_ONCE() to avoid any potential problems with store tearing. Signed-off-by:
Mel Gorman <mgorman@techsingularity.net> Signed-off-by:
Valentin Schneider <valentin.schneider@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> Fixes: 68520796 ("sched: Move h_load calculation to task_h_load()") Link: https://lkml.kernel.org/r/20190319123610.nsivgf3mjbjjesxb@techsingularity.netSigned-off-by:
-
Dan Carpenter authored
commit 42d8644b upstream. The "call" variable comes from the user in privcmd_ioctl_hypercall(). It's an offset into the hypercall_page[] which has (PAGE_SIZE / 32) elements. We need to put an upper bound on it to prevent an out of bounds access. Cc: stable@vger.kernel.org Fixes: 1246ae0b ("xen: add variable hypercall caller") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
-
Will Deacon authored
commit 1e6f5440 upstream. Calling dump_backtrace() with a pt_regs argument corresponding to userspace doesn't make any sense and our unwinder will simply print "Call trace:" before unwinding the stack looking for user frames. Rather than go through this song and dance, just return early if we're passed a user register state. Cc: <stable@vger.kernel.org> Fixes: 1149aad1 ("arm64: Add dump_backtrace() in show_regs") Reported-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Peter Geis authored
commit 6fd8b978 upstream. Several rk3328 based boards experience high rgmii tx error rates. This is due to several pins in the rk3328.dtsi rgmii pinmux that are missing a defined pull strength setting. This causes the pinmux driver to default to 2ma (bit mask 00). These pins are only defined in the rk3328.dtsi, and are not listed in the rk3328 specification. The TRM only lists them as "Reserved" (RK3328 TRM V1.1, 3.3.3 Detail Register Description, GRF_GPIO0B_IOMUX, GRF_GPIO0C_IOMUX, GRF_GPIO0D_IOMUX). However, removal of these pins from the rgmii pinmux definition causes the interface to fail to transmit. Also, the rgmii tx and rx pins defined in the dtsi are not consistent with the rk3328 specification, with tx pins currently set to 12ma and rx pins set to 2ma. Fix this by setting tx pins to 8ma and the rx pins to 4ma, consistent with the specification. Defining the drive strength for the undefined pins eliminated the high tx packet error rate observed under heavy data transfers. Aligning the drive strength to the TRM values eliminated the occasional packet retry errors under iperf3 testing. This allows much higher data rates with no recorded tx errors. Tested on the rk3328-roc-cc board. Fixes: 52e02d37 ("arm64: dts: rockchip: add core dtsi file for RK3328 SoCs") Cc: stable@vger.kernel.org Signed-off-by:
Peter Geis <pgwipeout@gmail.com> Signed-off-by:
-
Will Deacon authored
commit 045afc24 upstream. Rather embarrassingly, our futex() FUTEX_WAKE_OP implementation doesn't explicitly set the return value on the non-faulting path and instead leaves it holding the result of the underlying atomic operation. This means that any FUTEX_WAKE_OP atomic operation which computes a non-zero value will be reported as having failed. Regrettably, I wrote the buggy code back in 2011 and it was upstreamed as part of the initial arm64 support in 2012. The reasons we appear to get away with this are: 1. FUTEX_WAKE_OP is rarely used and therefore doesn't appear to get exercised by futex() test applications 2. If the result of the atomic operation is zero, the system call behaves correctly 3. Prior to version 2.25, the only operation used by GLIBC set the futex to zero, and therefore worked as expected. From 2.25 onwards, FUTEX_WAKE_OP is not used by GLIBC at all. Fix the implementation by ensuring that the return value is either 0 to indicate that the atomic operation completed successfully, or -EFAULT if we encountered a fault when accessing the user mapping. Cc: <stable@kernel.org> Fixes: 6170a974 ("arm64: Atomic operations") Signed-off-by:
-
David Engraf authored
commit e7dfb6d0 upstream. The function argument for the ISC_D0 on PC9 was incorrect. According to the documentation it should be 'C' aka 3. Signed-off-by:
David Engraf <david.engraf@sysgo.com> Reviewed-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
Ludovic Desroches <ludovic.desroches@microchip.com> Fixes: 7f16cb67 ("ARM: at91/dt: add sama5d2 pinmux") Cc: <stable@vger.kernel.org> # v4.4+ Signed-off-by:
-
Peter Ujfalusi authored
commit 4f96dc0a upstream. Correctly map the regulators used by tlv320aic3106. Both 1.8V and 3.3V for the codec is derived from VBAT via fixed regulators. Cc: <Stable@vger.kernel.org> # v4.14+ Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Peter Ujfalusi authored
commit 66913706 upstream. Correctly map the regulators used by tlv320aic3106. Both 1.8V and 3.3V for the codec is derived from VBAT via fixed regulators. Cc: <Stable@vger.kernel.org> # v4.14+ Signed-off-by:
-
Jonas Karlman authored
commit 6b2fde3d upstream. The following error can be seen during boot: of: /cpus/cpu@501: Couldn't find opp node Change cpu nodes to use operating-points-v2 in order to fix this. Fixes: ce76de98 ("ARM: dts: rockchip: convert rk3288 to operating-points-v2") Cc: stable@vger.kernel.org Signed-off-by:
Jonas Karlman <jonas@kwiboo.se> Signed-off-by:
-
Cornelia Huck authored
commit cf94db21 upstream. vring_create_virtqueue() allows the caller to specify via the may_reduce_num parameter whether the vring code is allowed to allocate a smaller ring than specified. However, the split ring allocation code tries to allocate a smaller ring on allocation failure regardless of what the caller specified. This may cause trouble for e.g. virtio-pci in legacy mode, which does not support ring resizing. (The packed ring code does not resize in any case.) Let's fix this by bailing out immediately in the split ring code if the requested size cannot be allocated and may_reduce_num has not been specified. While at it, fix a typo in the usage instructions. Fixes: 2a2d1382 ("virtio: Add improved queue allocation API") Cc: stable@vger.kernel.org # v4.6+ Signed-off-by:
Cornelia Huck <cohuck@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Reviewed-by:
Halil Pasic <pasic@linux.ibm.com> Reviewed-by:
Jens Freimann <jfreimann@redhat.com> Signed-off-by:
-
Kefeng Wang authored
commit e8458e7a upstream. When CONFIG_SPARSE_IRQ is disable, the request_mutex in struct irq_desc is not initialized which causes malfunction. Fixes: 9114014c ("genirq: Add mutex to irq desc to serialize request/free_irq()") Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Mukesh Ojha <mojha@codeaurora.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190404074512.145533-1-wangkefeng.wang@huawei.comSigned-off-by:
-
Stephen Boyd authored
commit 325aa195 upstream. If a child irqchip calls irq_chip_set_wake_parent() but its parent irqchip has the IRQCHIP_SKIP_SET_WAKE flag set an error is returned. This is inconsistent behaviour vs. set_irq_wake_real() which returns 0 when the irqchip has the IRQCHIP_SKIP_SET_WAKE flag set. It doesn't attempt to walk the chain of parents and set irq wake on any chips that don't have the flag set either. If the intent is to call the .irq_set_wake() callback of the parent irqchip, then we expect irqchip implementations to omit the IRQCHIP_SKIP_SET_WAKE flag and implement an .irq_set_wake() function that calls irq_chip_set_wake_parent(). The problem has been observed on a Qualcomm sdm845 device where set wake fails on any GPIO interrupts after applying work in progress wakeup irq patches to the GPIO driver. The chain of chips looks like this: QCOM GPIO -> QCOM PDC (SKIP) -> ARM GIC (SKIP) The GPIO controllers parent is the QCOM PDC irqchip which in turn has ARM GIC as parent. The QCOM PDC irqchip has the IRQCHIP_SKIP_SET_WAKE flag set, and so does the grandparent ARM GIC. The GPIO driver doesn't know if the parent needs to set wake or not, so it unconditionally calls irq_chip_set_wake_parent() causing this function to return a failure because the parent irqchip (PDC) doesn't have the .irq_set_wake() callback set. Returning 0 instead makes everything work and irqs from the GPIO controller can be configured for wakeup. Make it consistent by returning 0 (success) from irq_chip_set_wake_parent() when a parent chip has IRQCHIP_SKIP_SET_WAKE set. [ tglx: Massaged changelog ] Fixes: 08b55e2a ("genirq: Add irqchip_set_wake_parent") Signed-off-by:
Stephen Boyd <swboyd@chromium.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-gpio@vger.kernel.org Cc: Lina Iyer <ilina@codeaurora.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190325181026.247796-1-swboyd@chromium.orgSigned-off-by:
-
Jason Yan authored
commit a89afe58 upstream. If the last bio returned is not dio->bio, the status of the bio will not assigned to dio->bio if it is error. This will cause the whole IO status wrong. ksoftirqd/21-117 [021] ..s. 4017.966090: 8,0 C N 4883648 [0] <idle>-0 [018] ..s. 4017.970888: 8,0 C WS 4924800 + 1024 [0] <idle>-0 [018] ..s. 4017.970909: 8,0 D WS 4935424 + 1024 [<idle>] <idle>-0 [018] ..s. 4017.970924: 8,0 D WS 4936448 + 321 [<idle>] ksoftirqd/21-117 [021] ..s. 4017.995033: 8,0 C R 4883648 + 336 [65475] ksoftirqd/21-117 [021] d.s. 4018.001988: myprobe1: (blkdev_bio_end_io+0x0/0x168) bi_status=7 ksoftirqd/21-117 [021] d.s. 4018.001992: myprobe: (aio_complete_rw+0x0/0x148) x0=0xffff802f2595ad80 res=0x12a000 res2=0x0 We always have to assign bio->bi_status to dio->bio.bi_status because we will only check dio->bio.bi_status when we return the whole IO to the upper layer. Fixes: 542ff7bf ("block: new direct I/O implementation") Cc: stable@vger.kernel.org Cc: Christoph Hellwig <hch@lst.de> Cc: Jens Axboe <axboe@kernel.dk> Reviewed-by:
Jason Yan <yanaijie@huawei.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Jérôme Glisse authored
commit a3761c3c upstream. When bio_add_pc_page() fails in bio_copy_user_iov() we should free the page we just allocated otherwise we are leaking it. Cc: linux-block@vger.kernel.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: stable@vger.kernel.org Reviewed-by:
Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by:
Jérôme Glisse <jglisse@redhat.com> Signed-off-by:
-
Dmitry V. Levin authored
commit 10a16997 upstream. RISC-V syscall arguments are located in orig_a0,a1..a5 fields of struct pt_regs. Due to an off-by-one bug and a bug in pointer arithmetic syscall_get_arguments() was reading s3..s7 fields instead of a1..a5. Likewise, syscall_set_arguments() was writing s3..s7 fields instead of a1..a5. Link: http://lkml.kernel.org/r/20190329171221.GA32456@altlinux.org Fixes: e2c0cdfb ("RISC-V: User-facing API") Cc: Ingo Molnar <mingo@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Will Drewry <wad@chromium.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: linux-riscv@lists.infradead.org Cc: stable@vger.kernel.org # v4.15+ Acked-by:
Palmer Dabbelt <palmer@sifive.com> Signed-off-by:
Dmitry V. Levin <ldv@altlinux.org> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Anand Jain authored
commit 272e5326 upstream. The compression property resets to NULL, instead of the old value if we fail to set the new compression parameter. $ btrfs prop get /btrfs compression compression=lzo $ btrfs prop set /btrfs compression zli ERROR: failed to set compression for /btrfs: Invalid argument $ btrfs prop get /btrfs compression This is because the compression property ->validate() is successful for 'zli' as the strncmp() used the length passed from the userspace. Fix it by using the expected string length in strncmp(). Fixes: 63541927 ("Btrfs: add support for inode properties") Fixes: 5c1aab1d ("btrfs: Add zstd support") CC: stable@vger.kernel.org # 4.14+ Reviewed-by:
Nikolay Borisov <nborisov@suse.com> Signed-off-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Anand Jain authored
commit 50398fde upstream. We let pass zstd compression parameter even if it is not fully valid. For example: $ btrfs prop set /btrfs compression zst $ btrfs prop get /btrfs compression compression=zst zlib and lzo are fine. Fix it by checking the correct prefix length. Fixes: 5c1aab1d ("btrfs: Add zstd support") CC: stable@vger.kernel.org # 4.14+ Reviewed-by:
-
Filipe Manana authored
commit f35f06c3 upstream. Whan a filesystem is mounted with the nologreplay mount option, which requires it to be mounted in RO mode as well, we can not allow discard on free space inside block groups, because log trees refer to extents that are not pinned in a block group's free space cache (pinning the extents is precisely the first phase of replaying a log tree). So do not allow the fitrim ioctl to do anything when the filesystem is mounted with the nologreplay option, because later it can be mounted RW without that option, which causes log replay to happen and result in either a failure to replay the log trees (leading to a mount failure), a crash or some silent corruption. Reported-by:
Darrick J. Wong <darrick.wong@oracle.com> Fixes: 96da0919 ("btrfs: Introduce new mount option to disable tree log replay") CC: stable@vger.kernel.org # 4.9+ Reviewed-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
-
S.j. Wang authored
commit 0ff4e8c6 upstream. There is very low possibility ( < 0.1% ) that channel swap happened in beginning when multi output/input pin is enabled. The issue is that hardware can't send data to correct pin in the beginning with the normal enable flow. This is hardware issue, but there is no errata, the workaround flow is that: Each time playback/recording, firstly clear the xSMA/xSMB, then enable TE/RE, then enable xSMB and xSMA (xSMB must be enabled before xSMA). Which is to use the xSMA as the trigger start register, previously the xCR_TE or xCR_RE is the bit for starting. Fixes commit 43d24e76 ("ASoC: fsl_esai: Add ESAI CPU DAI driver") Cc: <stable@vger.kernel.org> Reviewed-by:
Fabio Estevam <festevam@gmail.com> Acked-by:
Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
