- 15 Oct, 2021 14 commits
-
-
Kuninori Morimoto authored
This patch adds DPCM link Multi-CPU/Codec sample to audio-graph-card2-custom-sample.dtsi. This sample is assuming MIXer connection. One note is that Multi-FE is not supported on ASoC FE BE **** +-+ CPU5 -- * * -- | | -- Codec4 CPU6 -- * * | | -- Codec5 **** +-+ Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87pmsalu2s.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
This patch adds DPCM link Single-CPU/Codec sample to audio-graph-card2-custom-sample.dtsi. This sample is assuming MIXer connection. FE BE **** CPU3 -- * * -- Codec3 CPU4 -- * * **** Signed-off-by:
-
Kuninori Morimoto authored
This patch adds Normal link Multi-CPU/Codec sample to audio-graph-card2-custom-sample.dtsi. +-+ +-+ CPU1 --| | <---> | | -- Codec1 CPU2 --| | | | -- Codec2 +-+ +-+ Signed-off-by: -
Kuninori Morimoto authored
Audio Graph Card2 settings is a little bit difficult for beginner, and Customizing it also difficult/confusable too. So, this patch adds sample for it. You can easily use it by adding below line on your DT file, and select CONFIGs to your .config. #include "../../../../../sound/soc/generic/audio-graph-card2-custom-sample.dtsi" CONFIG_SND_AUDIO_GRAPH_CARD2 CONFIG_SND_AUDIO_GRAPH_CARD2_CUSTOM_SAMPLE CONFIG_SND_TEST_COMPONENT This patch uses audio-graph-card2 base custom sample driver. You can directly use audio-graph-card2 instead of custom sample driver by modifing compatible. - compatible = "audio-graph-card2-custom-sample"; + compatible = "audio-graph-card2"; Sample custom driver will indicate customized print. It is using Test-Component driver for CPU/Codec. It can indicate more detail print of each behavior if user want to. In such case, you need to update compatible to "xxx-nv" or "xxx-vv". - compatible = "test-cpu"; + compatible = "test-cpu-verbose"; Signed-off-by:
-
Kuninori Morimoto authored
audio-graph-card2 has customizing support. This means user can re-use audio-graph-card2 DT parsing, and possible to expand to own special handling. This patch adds Audio Graph Card2 Customize Sample Driver. It can re-use audio-graph-card2 parsing by calling audio_graph2_parse_of(...), and user can expand each functions by using hooks. Signed-off-by:
-
Kuninori Morimoto authored
This patch adds Audio Graph Card2 Yaml Document to Linux. Signed-off-by:
-
Kuninori Morimoto authored
This patch adds Codec2Codec support to audio-graph-card2. It can use Codec2Codec but very simple case only for now. It doesn't have "SWITCH" control yet, thus it start automatically when it was probed, and can't stop, so far. Thus it needs to be updated around widgets/routing handling, and you need to understand that it is under experimental. Codec has SND_SOC_DAPM_INPUT() (= IN) / SND_SOC_DAPM_OUTPUT(= OUT) widgets in below case. It is assuming 2channel, S32_LE format for now. It needs to be updated, too. It needs "codec2codec" node (= B), needs to have routing (= A), need to indicate CPU side at links (= X). ports@0 is for CPU side (= X), port@1 is Codec side (= Y). It needs to have "rate" (= C) +--+ | |<-- Codec0 <-- IN | |--> Codec1 --> OUT +--+ sound { compatible = "audio-graph-card2"; (A) routing = "OUT" ,"DAI1 Playback", "DAI0 Capture", "IN"; (X) links = <&c2c>; (B) codec2codec { ports { (C) rate = <48000>; (X) c2c: port@0 { c2cf_ep: endpoint { remote-endpoint = <&codec0_ep>; }; }; (Y) port@1 { c2cb_ep: endpoint { remote-endpoint = <&codec1_ep>; }; }; }; }; Codec { ports { port@0 { bitclock-master; frame-master; codec0_ep: endpoint { remote-endpoint = <&c2cf_ep>; }; }; port@1 { codec1_ep: endpoint { remote-endpoint = <&c2cb_ep>; }; }; }; }; Link: https://lore.kernel.org/r/87k0xszlep.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: -
Kuninori Morimoto authored
This patch adds DPCM support to audio-graph-card2. It uses "dpcm" node (= D), needs to have routing (= A), need to indicate both FE/BE at links (= B, C). dpcm ports@0 is for FE (= B), port@1 is for BE (= C). remote-endpoint can use both Single/Multi connection. DSP ************ PCM0 <--> * fe0 be0 * <--> DAI0: Codec Headset PCM1 <--> * fe1 be1 * <--> DAI1: Codec Speakers PCM2 <--> * fe2 be2 * <--> DAI2: MODEM PCM3 <--> * fe3 be3 * <--> DAI3: BT * be4 * <--> DAI4: DMIC * be5 * <--> DAI5: FM ************ sound { compatible = "audio-graph-card2"; // indicate routing (A) routing = "xxx Playback", "xxx Playback", "xxx Playback", "xxx Playback", "xxx Playback", "xxx Playback"; // indicate all Front-End, Back-End in DPCM case (B) links = <&fe0, &fe1, ... (C) &be0, &be1, ... (D) dpcm { // Front-End ports@0 { (B) fe0: port@0 { fe0_ep: endpoint { remote-endpoint = <&pcm0_ep>; }; }; (B) fe1: port@1 { fe1_ep: endpoint { remote-endpoint = <&pcm1_ep>; }; }; ... }; // Back-End ports@1 { (C) be0: port@0 { be0_ep: endpoint { remote-endpoint = <&dai0_ep>; }; }; (C) be1: port@1 { be1_ep: endpoint { remote-endpoint = <&dai1_ep>; }; }; ... }; }; }; CPU { ports { bitclock-master; frame-master; port@0 { pcm0_ep: endpoint { remote-endpoint = <&fe0_ep>; }; }; port@1 { pcm1_ep: endpoint { remote-endpoint = <&fe1_ep>; }; }; ... }; }; Codec { ports { port@0 { dai0_ep: endpoint { remote-endpoint = <&be0_ep>; }; }; port@1 { dai1_ep: endpoint { remote-endpoint = <&be1_ep>; }; }; ... }; }; Link: https://lore.kernel.org/r/87k0xszlep.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: -
Kuninori Morimoto authored
This patch adds Multi CPU/Codec support to audio-graph-card2. Multi CPU/Codec will have connection part (= X) and CPU/Codec list part (= Y). links indicates connection part of CPU side (= A). +-+ (A) +-+ CPU1 --(Y) | | <-(X)--(X)-> | | (Y)-- Codec1 CPU2 --(Y) | | | | (Y)-- Codec2 +-+ +-+ sound { compatible = "audio-graph-card2"; (A) links = <&mcpu>; multi { ports@0 { (X) (A) mcpu: port@0 { mcpu0_ep: endpoint { remote-endpoint = <&mcodec0_ep>; }; }; (Y) port@1 { mcpu1_ep: endpoint { remote-endpoint = <&cpu1_ep>; }; }; (Y) port@1 { mcpu2_ep: endpoint { remote-endpoint = <&cpu2_ep>; }; }; }; ports@1 { (X) port@0 { mcodec0_ep: endpoint { remote-endpoint = <&mcpu0_ep>; }; }; (Y) port@0 { mcodec1_ep: endpoint { remote-endpoint = <&codec1_ep>; }; }; (Y) port@1 { mcodec2_ep: endpoint { remote-endpoint = <&codec2_ep>; }; }; }; }; }; CPU { ports { bitclock-master; frame-master; port@0 { cpu1_ep: endpoint { remote-endpoint = <&mcpu1_ep>; }; }; port@1 { cpu2_ep: endpoint { remote-endpoint = <&mcpu2_ep>; }; }; }; }; Codec { ports { port@0 { codec1_ep: endpoint { remote-endpoint = <&mcodec1_ep>; }; }; port@1 { codec2_ep: endpoint { remote-endpoint = <&mcodec2_ep>; }; }; }; }; Link: https://lore.kernel.org/r/87k0xszlep.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/20210804171748.GC26252@sirena.org.ukSigned-off-by: -
Kuninori Morimoto authored
We already have audio-graph-card which is Of-graph base of general sound card driver. It is supporting DPCM connection, but was forcibly expanded. Thus, it is very difficult to add new features on it, for example Multi CPU/Codec support, Codec2Codec support, etc. This patch adds more flexible new Audio Graph Card2 driver for it. audio-graph-card and audio-graph-card2 are similar, but don't have full compatibility. Audio Graph Card2 supports very generic connection, but some users want to have its own settings, for example PLL settings, etc. For such case, it has customizing support. In users own driver, it can use Audio Graph Card2 parsing by using audio_graph2_parse_of(), and doing its own customizing. Because Audio Graph Card2 is still under experimental stage, it will indicate such warning when probing, and the DT syntax might be changed. Link: https://lore.kernel.org/r/87k0xszlep.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/871r8u4s6q.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/87a6mhwyqn.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/87tuitusy4.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/87a6jn56x0.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Kuninori Morimoto authored
codec2codec needs snd_soc_pcm_stream settings. This patch adds it. Signed-off-by:
-
Kuninori Morimoto authored
audio-graph-card2 will support DPCM/Multi/Codec2Codec, and these will use almost same DT settings which uses ports0 and ports1. This patch adds asoc_graph_is_ports0() which checks port is under port0 or not. Signed-off-by:
-
Kuninori Morimoto authored
We already have dummy-codec, dummy-platform. But its issues are 1) we don't have dummy-cpu, 2) we can't select it via DeviceTree 3) It do nothing Sometimes we want to have Dummy Sound Component for debugging, for testing, for learning Framework behavior, etc, etc... This patch adds Test-Component driver for it. User can select CPU Component by using "test-cpu" compatible, and can select Codec Component by using "test-codec" compatible. It doesn't support Platform so far, but is easy to add. We can verbose print to know its progress if user selected xxx-verbose compatible driver. for example, test-cpu : silent Component, silent DAI test-cpu-verbose-component : verbose Component, silent DAI test-cpu-verbose-dai : silent Component, verbose DAI test-cpu-verbose : verbose Component, verbose DAI Signed-off-by:
-
Kuninori Morimoto authored
This patch adds test-component sound device YAML bindings. It can be used for Sound Test/Debug. Signed-off-by:
-
- 14 Oct, 2021 1 commit
-
-
Derek Fang authored
A little pop can be heard obviously from HP while playing a silent. This patch fixes it by using two functions: 1. Enable HP 1bit output mode. 2. Change the charge pump switch size during playback on and off. Signed-off-by:
Derek Fang <derek.fang@realtek.com> Link: https://lore.kernel.org/r/20211014094054.811-1-derek.fang@realtek.comSigned-off-by:
-
- 13 Oct, 2021 8 commits
-
-
Peter Ujfalusi authored
There are several things the patch adding the support for 'I2S Reference' got wrong: - "None" selection is in fact equals to last selected reference - The custom put overrides RX/TX len, TDM slot sizes, etc - the enum is useless in most part for the reference tracking - there is no need for EXT control as there is a single bit in RT1011_TDM1_SET_1 register (bit 7) which selects the reference - it was using ucontrol->value.integer.value[0] in the put/get callbacks which causesed access to 'I2S Reference' enum with alsamixer to fail Complements: c3de683c ("ASoC: rt1011: Fix 'I2S Reference' enum control caused error") Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20211013123300.11095-1-peter.ujfalusi@linux.intel.comSigned-off-by:
-
Geert Uytterhoeven authored
make dt_binding_check: Documentation/devicetree/bindings/sound/rockchip,i2s-tdm.yaml: properties:rockchip,i2s-rx-route: {'required': ['maxItems']} is not allowed for {'$ref': '/schemas/types.yaml#/definitions/uint32-array', 'description': 'Defines the mapping of I2S RX sdis to I2S data bus lines. By default, they are mapped one-to-one. rockchip,i2s-rx-route = <3> would mean sdi3 is receiving from data0.', 'maxItems': 4, 'items': [{'enum': [0, 1, 2, 3]}]} hint: "maxItems" is not needed with an "items" list from schema $id: http://devicetree.org/meta-schemas/items.yaml# Documentation/devicetree/bindings/sound/rockchip,i2s-tdm.yaml: properties:rockchip,i2s-tx-route: {'required': ['maxItems']} is not allowed for {'$ref': '/schemas/types.yaml#/definitions/uint32-array', 'description': 'Defines the mapping of I2S TX sdos to I2S data bus lines. By default, they are mapped one-to-one. rockchip,i2s-tx-route = <3> would mean sdo3 is sending to data0.', 'maxItems': 4, 'items': [{'enum': [0, 1, 2, 3]}]} hint: "maxItems" is not needed with an "items" list from schema $id: http://devicetree.org/meta-schemas/items.yaml# Drop the "-" from the enums to fix this. Fixes: 510f1c13 ("ASoC: dt-bindings: rockchip: add i2s-tdm bindings") Signed-off-by:Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/606809e10db02f92b1e7f90c491cc72dd8e16f79.1634132907.git.geert+renesas@glider.beSigned-off-by:
-
Mark Brown authored
ChiYuan Huang <cy_huang@richtek.com>: From: ChiYuan Huang <cy_huang@richtek.com> This patch series Add the Richtek RT9120 support. In v4: - Add 'classd_tlv' for 'SPK Gain Volume' control item. - Unify the tlv declaration to the postfix '_tlv'. - Fix 'digital_tlv' mute as 1 to declare the minimum is muted. In v3: - Add dvdd regulator binding to check the dvdd voltage domain. - Refine sdo_select_text. - Use switch case in 'internal_power_event' function. - Remove the volume and mute initially write in component probe. - Remove the mute API. It's no need by HW design. In v2: - Add missing #sound-dai-cells property. ChiYuan Huang (2): ASoC: dt-bindings: rt9120: Add initial bindings ASoC: rt9120: Add rt9210 audio amplifier support .../devicetree/bindings/sound/richtek,rt9120.yaml | 59 +++ sound/soc/codecs/Kconfig | 10 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/rt9120.c | 495 +++++++++++++++++++++ 4 files changed, 566 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/richtek,rt9120.yaml create mode 100644 sound/soc/codecs/rt9120.c -- 2.7.4
-
ChiYuan Huang authored
Add Richtek rt9120 audio amplifier support. Signed-off-by:
ChiYuan Huang <cy_huang@richtek.com> Link: https://lore.kernel.org/r/1634088519-995-3-git-send-email-u0084500@gmail.comSigned-off-by:
-
ChiYuan Huang authored
Add initial bindings for Richtek rt9120 audio amplifier. Signed-off-by:
-
Rikard Falkeborn authored
The only usage of acp5x_i2s_dai_ops is to assign its address to the ops field in the snd_soc_dai_driver struct, which is a pointer to const. Make it const to allow the compiler to put it in read-only memory. Signed-off-by:
Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lore.kernel.org/r/20211012211506.21159-1-rikard.falkeborn@gmail.comSigned-off-by:
-
Rikard Falkeborn authored
These are only assigned to the ops field in the snd_soc_dai_link struct which is a pointer to const struct snd_soc_ops. Make them const to allow the compiler to put them in read-only memory. Signed-off-by:
-
Mark Brown authored
This drops the rt9210 support due to a race with a new version being sent out for some incremental changes. Signed-off-by:
-
- 12 Oct, 2021 1 commit
-
-
Peter Ujfalusi authored
Access to 'I2S Reference' enum causes alsamixer to fail to load: $ alsamixer cannot load mixer controls: Invalid argument cml_rt1011_rt5682 cml_rt1011_rt5682: control 2:0:0:TL I2S Reference:0: access overflow The reason is that the original patch adding the code was using ucontrol->value.integer.value[0] instead the correct ucontrol->value.enumerated.item[0] for an ENUM control. Fixes: 87f40af2 ("ASoC: rt1011: add i2s reference control for rt1011") Reported-by:
Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com> Signed-off-by:
-
- 11 Oct, 2021 11 commits
-
-
Mark Brown authored
Merge series "ASoC: Intel: bytcr_rt5651: few cleanups" from Andy Shevchenko <andriy.shevchenko@linux.intel.com>: The small set of cleanups against bytcr_rt5651 board file. In v2: - added commit message to patch 2 (Joe, Pierre) - added cover letter (Pierre) - added Hans to Cc list (Hans) Andy Shevchenko (4): ASoC: Intel: bytcr_rt5651: Get platform data via dev_get_platdata() ASoC: Intel: bytcr_rt5651: Use temporary variable for struct device ASoC: Intel: bytcr_rt5651: use devm_clk_get_optional() for mclk ASoC: Intel: bytcr_rt5651: Utilize dev_err_probe() to avoid log saturation sound/soc/intel/boards/bytcr_rt5651.c | 118 +++++++++++--------------- 1 file changed, 50 insertions(+), 68 deletions(-) -- 2.33.0 -
Andy Shevchenko authored
dev_err_probe() avoids printing into log when the deferred probe is invoked. This is possible when clock provider is pending to appear. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20211007170250.27997-5-andriy.shevchenko@linux.intel.comSigned-off-by:
-
Andy Shevchenko authored
The devm_clk_get_optional() helper returns NULL when devm_clk_get() returns -ENOENT. This makes things slightly cleaner. The added benefit is mostly cosmetic. Signed-off-by:
-
Andy Shevchenko authored
Use temporary variable for struct device to make code neater. Signed-off-by:
-
Andy Shevchenko authored
Access to platform data via dev_get_platdata() getter to make code cleaner. Signed-off-by:
-
Andy Shevchenko authored
dev_err_probe() avoids printing into log when the deferred probe is invoked. This is possible when clock provider is pending to appear. Signed-off-by:
-
Andy Shevchenko authored
The devm_clk_get_optional() helper returns NULL when devm_clk_get() returns -ENOENT. This makes things slightly cleaner. The added benefit is mostly cosmetic. Signed-off-by:
-
Andy Shevchenko authored
Use temporary variable for struct device to make code neater. Signed-off-by:
-
Andy Shevchenko authored
Access to platform data via dev_get_platdata() getter to make code cleaner. Signed-off-by:
-
Mark Brown authored
The SH machine drivers have some ASoC DAI format specifications that use older defines based on outdated terminology which we're trying to retire, update to the new bindings. Signed-off-by:
-
Ajit Kumar Pandey authored
We are using fch clock controller as parent mclk source for rt5682 codec. Add config to enable clock framework support for 48MHz fixed clock when machine driver config is selected. Signed-off-by:
Ajit Kumar Pandey <AjitKumar.Pandey@amd.com> Link: https://lore.kernel.org/r/20211011055354.67719-1-AjitKumar.Pandey@amd.comSigned-off-by:
-
- 08 Oct, 2021 5 commits
-
-
Colin Ian King authored
In the case where the call to i2s_tdm_prepare_enable_mclk fails the function returns before the error handling goto is executed. Fix this by removing the return do perform the intended error handling exit. Fixes: 081068fd ("ASoC: rockchip: add support for i2s-tdm controller") Addresses-Coverity: ("Structurally dead code") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Message-Id: <20211008095430.62680-2-colin.king@canonical.com> Signed-off-by:
-
Colin Ian King authored
The call to rockchip_i2s_ch_to_io is only useful for its return value which is not being used. The function call also has no side effects, the call is effectively useless and can be removed. Addresses-Coverity: ("Useless call") Signed-off-by: -
Trevor Wu authored
Because clock names are modified in mediatek CCF driver, sync the updated clock names to audsys driver. Signed-off-by:
Trevor Wu <trevor.wu@mediatek.com> Message-Id: <20211008070424.14347-1-trevor.wu@mediatek.com> Signed-off-by:
-
Mark Brown authored
ChiYuan Huang <cy_huang@richtek.com>: From: ChiYuan Huang <cy_huang@richtek.com> This patch series Add the Richtek RT9120 support. In v3: - Add dvdd regulator binding to check the dvdd voltage domain. - Refine sdo_select_text. - Use switch case in 'internal_power_event' function. - Remove the volume and mute initially write in component probe. - Remove the mute API. It's no need by HW design. In v2: - Add missing #sound-dai-cells property. ChiYuan Huang (2): ASoC: dt-bindings: rt9120: Add initial bindings ASoC: rt9120: Add rt9210 audio amplifier support .../devicetree/bindings/sound/richtek,rt9120.yaml | 59 +++ sound/soc/codecs/Kconfig | 10 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/rt9120.c | 489 +++++++++++++++++++++ 4 files changed, 560 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/richtek,rt9120.yaml create mode 100644 sound/soc/codecs/rt9120.c -- 2.7.4
-
Mark Brown authored
Merge series "ASoC: Intel: bytcht_es8316: few cleanups" from Andy Shevchenko <andriy.shevchenko@linux.intel.com>: The small set of cleanups against bytcht_es8316 board file. In v4: - fixed Pierre's email (Pierre) - added Hans to the Cc list In v3: - actually added a Pierre's tag (Mark) In v2: - added tag (Pierre) - added commit message to the patch 2 (Joe) Andy Shevchenko (4): ASoC: Intel: bytcht_es8316: Get platform data via dev_get_platdata() ASoC: Intel: bytcht_es8316: Use temporary variable for struct device ASoC: Intel: bytcht_es8316: Switch to use gpiod_get_optional() ASoC: Intel: bytcht_es8316: Utilize dev_err_probe() to avoid log saturation sound/soc/intel/boards/bytcht_es8316.c | 37 +++++++++----------------- 1 file changed, 12 insertions(+), 25 deletions(-) -- 2.33.0
-
