- 22 Jan, 2018 40 commits
-
-
Liu Bo authored
Since fail stripe index in rbio would be used to decide which algorithm reconstruction would be run, we cannot merge rbios if their's fail striped indexes are different, otherwise, one of the two reconstructions would fail. Signed-off-by:
Liu Bo <bo.li.liu@oracle.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Liu Bo authored
Given the above ' if (last->operation != cur->operation) return 0; ', it's guaranteed that two operations are same. Signed-off-by:
-
Anand Jain authored
Assign ret = -EINVAL where it is actually required. Remove { } around single line if else code. Signed-off-by:Anand Jain <anand.jain@oracle.com> Signed-off-by:
-
Anand Jain authored
No functional change rearrange the mutex_unlock. Signed-off-by:
Nikolay Borisov <nborisov@suse.com> [ edit subject ] Signed-off-by:
-
Anand Jain authored
btrfs_device::scrub_device is not a device which is being scrubbed, but it holds the scrub context, so rename to reflect the same. No functional changes here. Signed-off-by:
-
Anand Jain authored
There is no other consumer for btrfs_handle_error() other than __btrfs_handle_fs_error(), further this function quite small. Merge it into its parent. Signed-off-by:
-
Anand Jain authored
__btrfs_handle_fs_error() sets BTRFS_FS_STATE_ERROR, and calls btrfs_handle_error() so no need to check if the BTRFS_FS_STATE_ERROR is set in btrfs_handle_error(). And there is no other user of btrfs_handle_error() as well. Signed-off-by:
-
Liu Bo authored
There is a scenario that can end up with rebuild process failing to return good content, i.e. suppose that all disks can be read without problems and if the content that was read out doesn't match its checksum, currently for raid6 btrfs at most retries twice, - the 1st retry is to rebuild with all other stripes, it'll eventually be a raid5 xor rebuild, - if the 1st fails, the 2nd retry will deliberately fail parity p so that it will do raid6 style rebuild, however, the chances are that another non-parity stripe content also has something corrupted, so that the above retries are not able to return correct content, and users will think of this as data loss. More seriouly, if the loss happens on some important internal btree roots, it could refuse to mount. This extends btrfs to do more retries and each retry fails only one stripe. Since raid6 can tolerate 2 disk failures, if there is one more failure besides the failure on which we're recovering, this can always work. The worst case is to retry as many times as the number of raid6 disks, but given the fact that such a scenario is really rare in practice, it's still acceptable. Signed-off-by:
-
Liu Bo authored
The raid6 corruption is that, suppose that all disks can be read without problems and if the content that was read out doesn't match its checksum, currently for raid6 btrfs at most retries twice, - the 1st retry is to rebuild with all other stripes, it'll eventually be a raid5 xor rebuild, - if the 1st fails, the 2nd retry will deliberately fail parity p so that it will do raid6 style rebuild, however, the chances are that another non-parity stripe content also has something corrupted, so that the above retries are not able to return correct content. We've fixed normal reads to rebuild raid6 correctly with more retries in Patch "Btrfs: make raid6 rebuild retry more"[1], this is to fix scrub to do the exactly same rebuild process. [1]: https://patchwork.kernel.org/patch/10091755/Signed-off-by:
-
Anand Jain authored
Update btrfs_check_rw_degradable() to check against the given device if its lost. We can use this function to know if the volume is going to be in degraded mode OR failed state, when the given device fails. Which is needed when we are handling the device failed state. A preparatory patch does not affect the flow as such. Signed-off-by:
Qu Wenruo <wqu@suse.com> [ enhance comment ] Signed-off-by:
-
David Sterba authored
All callers pass either GFP_NOFS or GFP_KERNEL now, so we can sink the parameter to the function, though we lose some of the slightly better semantics of GFP_KERNEL in some places, it's worth cleaning up the callchains. Signed-off-by: -
David Sterba authored
There's only one instance where we pass different gfp mask to unlock_extent_cached. Add a separate helper for that and then we can drop the gfp parameter from unlock_extent_cached. Signed-off-by: -
David Sterba authored
Recent patches reworking the mount path left some unused parameters. We pass a vfsmount to mount_subvol, the flags and data (ie. mount options) have been already applied and we will not need them. Signed-off-by: -
Misono, Tomohiro authored
Long ago, commit edf24abe ("btrfs: sanity mount option parsing and early mount code") split the btrfs_parse_options() into two parts (btrfs_parse_early_options() and btrfs_parse_options()). As a result, btrfs_parse_optins no longer gets called twice and is the last one to parse mount option string. Therefore there is no need to dup it. Signed-off-by:
Tomohiro Misono <misono.tomohiro@jp.fujitsu.com> Reviewed-by:
-
Liu Bo authored
In fact nobody is waiting on @wait's waitqueue, it can be safely removed. Signed-off-by:
-
Nikolay Borisov authored
The bio is not referenced after it has been submitted and the endio is going to consume the sole reference on successful submission. On error, the callers of __btrfs_submit_dio_bio do invoke bio_put so we don't leak it either. Signed-off-by:
-
Nikolay Borisov authored
The bio is never referenced after it has been submitted so there is no point in getting an extra reference. Signed-off-by:
-
Nikolay Borisov authored
The bio that is passsed is the newly created repair bio which already has a reference count of 1, which is going to be consumed by the endio routine on successful submission. On error the handler also calls bio_put. Signed-off-by:
-
Nikolay Borisov authored
bio_get/set is necessary only if the bio is going to be referenced following submissions. In the code paths where such calls are made we don't really need them since the bio is referenced only if btrfs_map_bio returns an error. And this function can return an error prior to submission only. So referencing the bio is safe. Furthermore we do call bio_endio which will consume the last reference. So let's remove the redundant calls. Signed-off-by:
-
Nikolay Borisov authored
Signed-off-by:
-
David Sterba authored
As it's a single instance and local to the file, we don't need to pass it as an argument. Reviewed-by:
Timofey Titovets <nefelim4ag@gmail.com> Signed-off-by:
-
David Sterba authored
The callback is trivial and we don't need the abstraction for our purposes. Let's open code it. Reviewed-by:
-
David Sterba authored
The callback is trivial and we don't need the abstraction for our purposes. Let's open code it and also make the array types explicit. Reviewed-by:
-
Misono, Tomohiro authored
Remove unused arg 'holder' from parse_subvol_options(), which has been forgotten to be cleaned in the commit b99beb110e2d ("btrfs: split parse_early_options() in two"). Signed-off-by: -
Misono, Tomohiro authored
Since setup_root_args() is not used anymore, just remove it. Signed-off-by:
-
Misono, Tomohiro authored
Now parse_early_options() is used by both btrfs_mount() and btrfs_mount_root(). However, the former only needs subvol related part and the latter needs the others. Therefore extract the subvol related parts from parse_early_options() and move it to new parse function (parse_subvol_options()). Signed-off-by:
-
Misono, Tomohiro authored
Cleanup btrfs_mount() by using btrfs_mount_root(). This avoids getting btrfs_mount() called twice in mount path. Old btrfs_mount() will do: 0. VFS layer calls vfs_kern_mount() with registered file_system_type (for btrfs, btrfs_fs_type). btrfs_mount() is called on the way. 1. btrfs_parse_early_options() parses "subvolid=" mount option and set the value to subvol_objectid. Otherwise, subvol_objectid has the initial value of 0 2. check subvol_objectid is 5 or not. Assume this time id is not 5, then btrfs_mount() returns by calling mount_subvol() 3. In mount_subvol(), original mount options are modified to contain "subvolid=0" in setup_root_args(). Then, vfs_kern_mount() is called with btrfs_fs_type and new options 4. btrfs_mount() is called again 5. btrfs_parse_early_options() parses "subvolid=0" and set 5 (instead of 0) to subvol_objectid 6. check subvol_objectid is 5 or not. This time id is 5 and mount_subvol() is not called. btrfs_mount() finishes mounting a root 7. (in mount_subvol()) with using a return vale of vfs_kern_mount(), it calls mount_subtree() 8. return subvolume's dentry Reusing the same file_system_type (and btrfs_mount()) for vfs_kern_mount() is the cause of complication. Instead, new btrfs_mount() will do: 1. parse subvol id related options for later use in mount_subvol() 2. mount device's root by calling vfs_kern_mount() with btrfs_root_fs_type, which is not registered to VFS by register_filesystem(). As a result, btrfs_mount_root() is called 3. return by calling mount_subvol() The code of 2. is moved from the first part of mount_subvol(). The semantics of device holder changes from btrfs_fs_type to btrfs_root_fs_type and has to be used in all contexts. Otherwise we'd get wrong results when mount and dev scan would not check the same thing. (this has been found indendently and the fix is folded into this patch) Signed-off-by:
-
Misono, Tomohiro authored
Add btrfs_mount_root() and new file_system_type for preparation of cleanup of btrfs_mount(). Code path is not changed yet. btrfs_mount_root() is almost the same as current btrfs_mount(), but doesn't have subvolume related part. Signed-off-by:
-
David Sterba authored
Functions called from extent_write_cache_pages used void* as generic callback data, but all of them convert it to extent_page_data, or use it directly. Signed-off-by: -
David Sterba authored
The function extent_write_cache_pages is modelled after write_cache_pages which is a generic interface and the writepage parameter makes sense there. In btrfs we know exactly which callback we're going to use, so we can pass it directly. Signed-off-by: -
David Sterba authored
All callers pass the same value flush_write_bio. Signed-off-by: -
David Sterba authored
flush_epd_write_bio is same as flush_write_bio, no point having two such functions. Merge them to flush_write_bio. The 'noinline' attribute is removed as it does not have any meaning. Signed-off-by: -
Nikolay Borisov authored
Currently there are 2 function doing binary search on btrfs nodes: bin_search and btrfs_bin_search. The latter being a simple wrapper for the former. So eliminate the wrapper and just rename bin_search to btrfs_bin_search. No functional changes Signed-off-by:
-
Nikolay Borisov authored
The tree argument passed to extent_write_full_page is referenced from the page being passed to the same function. Since we already have enough information to get the reference, remove the function parameter. Signed-off-by:
-
Nikolay Borisov authored
This function is called only from submit_compressed_extents and the io tree being passed is always that of the inode. But we are also passing the inode, so just move getting the io tree pointer in extent_write_locked_range to simplify the signature. Signed-off-by:
-
Nikolay Borisov authored
This code was added in 492bb6de ("Btrfs: Hold a reference on bios during submit_bio, add some extra bio checks"). However, holding a reference on a bio is necessary only if it's going to be referenced after the submit_bio returns and the bio is completed. In this particular instance this is not the case so there is no need to hold an extra reference since we directly return. Signed-off-by:
-
Nikolay Borisov authored
When modifying a tree where the root is at BTRFS_MAX_LEVEL - 1 then the level variable is going to be 7 (this is the max height of the tree). On the other hand btrfs_cow_block is always called with "level + 1" as an index into the nodes and slots arrays. This leads to an out of bounds access. Admittdely this will be benign since an OOB access of the nodes array will likely read the 0th element from the slots array, which in this case is going to be 0 (since we start CoW at the top of the tree). The OOB access into the slots array in turn will read the 0th and 1st values of the locks array, which would both be 0 at the time. However, this benign behavior relies on the fact that the path being passed hasn't been initialised, if it has already been used to query a btree then it could potentially have populated the nodes/slots arrays. Fix it by explicitly checking if we are at level 7 (the maximum allowed index in nodes/slots arrays) and explicitly call the CoW routine with NULL for parent's node/slot. Signed-off-by:
-
Pravin Shedge authored
These duplicate includes have been found with scripts/checkincludes.pl but they have been removed manually to avoid removing false positives. Signed-off-by:
Pravin Shedge <pravin.shedge4linux@gmail.com> Signed-off-by:
-
Nikolay Borisov authored
This function was introduced by 247e743c ("Btrfs: Use async helpers to deal with pages that have been improperly dirtied") and it didn't do any error handling then. This function might very well fail in ENOMEM situation, yet it's not handled, this could lead to inconsistent state. So let's handle the failure by setting the mapping error bit. Cc: stable@vger.kernel.org Signed-off-by:
-
Anand Jain authored
Just a code spatial rearrangement, no functional change. Signed-off-by:
-
