update kfd_supported_devices to enable Aldebaran virtualization support
Signed-off-by: Zhigang Luo <zhigang.luo@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

It is Aldebaran VF device ID, for virtualization support.
Signed-off-by: Zhigang Luo <zhigang.luo@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

GPUs connected to CPUs over xGMI are bidirectional so set weight by a
single hop both ways.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Tested-by: Ramesh Errabolu <ramesh.errabolu@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Link atomics support over xGMI should be reported independently of PCIe.
Do not set NO_ATOMICS flags on devices that support xGMI but that do not
have atomics support over PCIe.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Tested-by: Ramesh Errabolu <ramesh.errabolu@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

There are two declarations of struct dc_state here.
Remove the later duplicate more secure.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

In commit 482812d5 ("drm/amd/display: Set max TTU on
DPG enable"), "hubp.h" was added which caused the duplicate include.
To be on the safe side, remove the later duplicate include.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Our driver supports overlay planes, and as expected, some userspace
compositor takes advantage of these features. If the userspace is not
enabling the cursor, they can use multiple planes as they please.
Nevertheless, we start to have constraints when userspace tries to
enable hardware cursor with various planes. Basically, we cannot draw
the cursor at the same size and position on two separated pipes since it
uses extra bandwidth and DML only run with one cursor.

For those reasons, when we enable hardware cursor and multiple planes,
our driver should accept variations like the ones described below:

  +-------------+   +--------------+
  | +---------+ |   |              |
  | |Primary  | |   | Primary      |
  | |         | |   | Overlay      |
  | +---------+ |   |              |
  |Overlay      |   |              |
  +-------------+   +--------------+

In this scenario, we can have the desktop UI in the overlay and some
other framebuffer attached to the primary plane (e.g., video). However,
userspace needs to obey some rules and avoid scenarios like the ones
described below (when enabling hw cursor):

                                      +--------+
                                      |Overlay |
 +-------------+    +-----+-------+ +-|        |--+
 | +--------+  | +--------+       | | +--------+  |
 | |Overlay |  | |Overlay |       | |             |
 | |        |  | |        |       | |             |
 | +--------+  | +--------+       | |             |
 | Primary     |    | Primary     | | Primary     |
 +-------------+    +-------------+ +-------------+

 +-------------+   +-------------+
 |     +--------+  |  Primary    |
 |     |Overlay |  |             |
 |     |        |  |             |
 |     +--------+  | +--------+  |
 | Primary     |   | |Overlay |  |
 +-------------+   +-|        |--+
                     +--------+

If the userspace violates some of the above scenarios, our driver needs
to reject the commit; otherwise, we can have unexpected behavior. Since
we don't have a proper driver validation for the above case, we can see
some problems like a duplicate cursor in applications that use multiple
planes. This commit fixes the cursor issue and others by adding adequate
verification for multiple planes.

Change since V1 (Harry and Sean):
- Remove cursor verification from the equation.

Cc: Louis Li <Ching-shih.Li@amd.com>
Cc: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

gfx ras now can be enabled by default in aldebaran
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

invoke callback function for mmhub ras fini
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

It was moved to hdp ras callbacks
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

add hdp block ras error query and reset support in
amdgpu ras error count query and reset interface
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

invoke hdp v4_0 ras init in gmc late_init phase
while ras fini in gmc sw_fini phase
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

hdp v4_0 support ras features
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

implement hdp v4_0 ras functions, including
ras init/fini, query/reset_error_counter
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

hdp ras init/fini are common functions that
can be shared among hdp generations
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

centralize all hdp ras operation to ras_funcs
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This error code-path is missing a drm_gem_object_put call. Other
error code-paths are fine.
Signed-off-by: Simon Ser <contact@emersion.fr>
Fixes: 1769152a ("drm/amdgpu: Fail fb creation from imported dma-bufs. (v2)")
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fix the following build warnings.

drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:
	In function ‘dm_update_mst_vcpi_slots_for_dsc’:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:6242:46:
	warning: variable ‘old_con_state’ set but not used

drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:
	In function ‘amdgpu_dm_commit_cursors’:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:7709:44:
	warning: variable ‘new_plane_state’ set but not used

The variables were introduced to be used in iterators, but not used.
Use other iterators which don't require the unused variables.

Fixes: 8ad27806 ("drm/amd/display: Disable cursors before disabling planes")
Fixes: 29b9ba74 ("drm/amd/display: Recalculate VCPI slots for new DSC connectors")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

In the function documentation, I removed the excess parameters,
described the undocumented ones, and fixed the syntax errors.
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Was missing when this structure was updated.

Fixes: 46a83eba ("drm/amd/display: Add debugfs to control DMUB trace buffer events")
Reviewed-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fixed kernel-doc syntax errors in documentation of functions.
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

When an amdgpu device fails to init, it makes another VGA device cause
kernel splat:
kernel: amdgpu 0000:08:00.0: amdgpu: amdgpu_device_ip_init failed
kernel: amdgpu 0000:08:00.0: amdgpu: Fatal error during GPU init
kernel: amdgpu: probe of 0000:08:00.0 failed with error -110
...
kernel: amdgpu 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
kernel: BUG: kernel NULL pointer dereference, address: 0000000000000018
kernel: #PF: supervisor read access in kernel mode
kernel: #PF: error_code(0x0000) - not-present page
kernel: PGD 0 P4D 0
kernel: Oops: 0000 [#1] SMP NOPTI
kernel: CPU: 6 PID: 1080 Comm: Xorg Tainted: G        W         5.12.0-rc8+ #12
kernel: Hardware name: HP HP EliteDesk 805 G6/872B, BIOS S09 Ver. 02.02.00 12/30/2020
kernel: RIP: 0010:amdgpu_device_vga_set_decode+0x13/0x30 [amdgpu]
kernel: Code: 06 31 c0 c3 b8 ea ff ff ff 5d c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 0f 1f 44 00 00 55 48 8b 87 90 06 00 00 48 89 e5 53 89 f3 <48> 8b 40 18 40 0f b6 f6 e8 40 58 39 fd 80 fb 01 5b 5d 19 c0 83 e0
kernel: RSP: 0018:ffffae3c0246bd68 EFLAGS: 00010002
kernel: RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
kernel: RDX: ffff8dd1af5a8560 RSI: 0000000000000000 RDI: ffff8dce8c160000
kernel: RBP: ffffae3c0246bd70 R08: ffff8dd1af5985c0 R09: ffffae3c0246ba38
kernel: R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000246
kernel: R13: 0000000000000000 R14: 0000000000000003 R15: ffff8dce81490000
kernel: FS:  00007f9303d8fa40(0000) GS:ffff8dd1af580000(0000) knlGS:0000000000000000
kernel: CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
kernel: CR2: 0000000000000018 CR3: 0000000103cfa000 CR4: 0000000000350ee0
kernel: Call Trace:
kernel:  vga_arbiter_notify_clients.part.0+0x4a/0x80
kernel:  vga_get+0x17f/0x1c0
kernel:  vga_arb_write+0x121/0x6a0
kernel:  ? apparmor_file_permission+0x1c/0x20
kernel:  ? security_file_permission+0x30/0x180
kernel:  vfs_write+0xca/0x280
kernel:  ksys_write+0x67/0xe0
kernel:  __x64_sys_write+0x1a/0x20
kernel:  do_syscall_64+0x38/0x90
kernel:  entry_SYSCALL_64_after_hwframe+0x44/0xae
kernel: RIP: 0033:0x7f93041e02f7
kernel: Code: 75 05 48 83 c4 58 c3 e8 f7 33 ff ff 0f 1f 80 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
kernel: RSP: 002b:00007fff60e49b28 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
kernel: RAX: ffffffffffffffda RBX: 000000000000000b RCX: 00007f93041e02f7
kernel: RDX: 000000000000000b RSI: 00007fff60e49b40 RDI: 000000000000000f
kernel: RBP: 00007fff60e49b40 R08: 00000000ffffffff R09: 00007fff60e499d0
kernel: R10: 00007f93049350b5 R11: 0000000000000246 R12: 000056111d45e808
kernel: R13: 0000000000000000 R14: 000056111d45e7f8 R15: 000056111d46c980
kernel: Modules linked in: nls_iso8859_1 snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_seq input_leds snd_seq_device snd_timer snd soundcore joydev kvm_amd serio_raw k10temp mac_hid hp_wmi ccp kvm sparse_keymap wmi_bmof ucsi_acpi efi_pstore typec_ucsi rapl typec video wmi sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 btrfs blake2b_generic zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx libcrc32c xor raid6_pq raid1 raid0 multipath linear dm_mirror dm_region_hash dm_log hid_generic usbhid hid amdgpu drm_ttm_helper ttm iommu_v2 gpu_sched i2c_algo_bit drm_kms_helper syscopyarea sysfillrect crct10dif_pclmul sysimgblt crc32_pclmul fb_sys_fops ghash_clmulni_intel cec rc_core aesni_intel crypto_simd psmouse cryptd r8169 i2c_piix4 drm ahci xhci_pci realtek libahci xhci_pci_renesas gpio_amdpt gpio_generic
kernel: CR2: 0000000000000018
kernel: ---[ end trace 76d04313d4214c51 ]---

Commit 4192f7b5 ("drm/amdgpu: unmap register bar on device init
failure") makes amdgpu_driver_unload_kms() skips amdgpu_device_fini(),
so the VGA clients remain registered. So when
vga_arbiter_notify_clients() iterates over registered clients, it causes
NULL pointer dereference.

Since there's no reason to register VGA clients that early, so solve
the issue by putting them after all the goto cleanups.

v2:
 - Remove redundant vga_switcheroo cleanup in failed: label.

Fixes: 4192f7b5 ("drm/amdgpu: unmap register bar on device init failure")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The runtime resume PM op disregards the return value from
amdgpu_device_resume(), masking errors for failed resumes at the PM
layer.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Pavan Kumar Ramayanam <pavan.ramayanam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Sriov gets suspend of IP block <dce_virtual> failed as return
value was not initialized.

v2: return 0 directly to align original code semantic before this
was broken out into a separate helper function instead of setting
initial values
Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The wave's number per simd in aldebaran is changed to 8, so it is
impossible to use old algorithm to initiate all sgprs with one
threadgroup. The new algorithm firstly use three threadgroups to
initiate most sgprs simultaneously and then use another threadgroup with
4 waves to cover other uninitiated sgprs.

v2:
Add more description about the new algorithm to clear sgprs and add some
comment for shader binaries
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

v2: updated MEC FW version after validating gws with debugger
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

After draining the stale retry fault, or failed to validate the range
to recover, have to remove the fault address from fault filter ring, to
be able to handle subsequent retry interrupt on same address. Otherwise
the retry fault will not be processed to recover until timeout passed.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add interface to remove address from fault filter ring by resetting
fault ring entry key, then future vm fault on the address will be
processed to recover.

Define fault key as atomic64_t type to use atomic read/set/cmpxchg key
to protect fault ring access by interrupt handler and interrupt deferred
work for vg20. Change fault->timestamp to 48-bit to share same uint64_t
with 8-bit fault->next, it is enough for 48bit IH timestamp.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Retry fault interrupt maybe pending in IH ring after GPU page table
is updated to recover the vm fault, because each page of the range
generate retry fault interrupt. There is race if application unmap
range to remove and free the range first and then retry fault work
restore_pages handle the retry fault interrupt, because range can not be
found, this vm fault can not be recovered and report incorrect GPU vm
fault to application.

Before unmap to remove and free range, drain retry fault interrupt
from IH ring1 to ensure no retry fault comes after the range is removed.

Drain retry fault interrupt skip the range which is on deferred list
to remove, or the range is child range, which is split by unmap, does
not add to svms and have interval notifier.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Sometimes IH do not setup ring wptr overflow flag after wptr exceed
rptr. As a workaround, if IH rptr equals to wptr, ring is empty,
return true to indicate IH ring checkpoint is processed, IH ring drain
is finished.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

GPU vm retry fault recover range need retry validation if

1. range is split in parallel by unmap while recover
2. range migrate to system memory and range is updated in system
memory while recover
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The plural of 'process' should be 'processes'.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Disable all ip's hw status to false before any hw_init.
Only set it to true until its hw_init is executed.

The old 5.9 branch has this change but somehow the 5.11 kernrel does
not have this fix.

Without this change, sriov tdr have gfx IB test fail.
Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com>
Review-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge the two loops, loosen the restriction for big allocations.
This reduces the CPU overhead in the good case, but increases
it a bit under memory pressure.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-and-Tested-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Use devm_memunmap_pages instead of memunmap_pages to release pgmap
and remove pgmap from device action, to avoid double free pgmap when
unloading driver module.

Release device memory region if failed to create device memory pages
structure.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

There is a spelling mistake in a pr_debug message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Correct and init the sdma4.x irq.num_types.

v2: squash in fix (Alex)
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Change the print level into debug.
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

PSP clear_vf_fw feature is outdated and has been removed.
Remove the related functions.
Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Wayne Lin <waynelin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>