- 15 Dec, 2022 39 commits
-
-
Evan Quan authored
Update AMDGPU_INFO_DEV_INFO IOCTL for minimum engine and memory clock. And update AMDGPU_INFO_SENSOR IOCTL for PEAK_PSTATE engine and memory clock. User applications can better utilize these IOCTLs to get needed informations. Increase the minor version number to indicate that the new flags are available. Proposed mesa patch: https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/278Signed-off-by:
Evan Quan <evan.quan@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Evan Quan authored
Otherwise, some UMD tools will treate them as 0 at default while actually they are not. Signed-off-by:
-
Evan Quan authored
Expose those informations to UMD who need them as for standard profiling mode. Signed-off-by:
-
Evan Quan authored
Enable peak profiling mode shader/memory clock reporting for powerplay framework. Signed-off-by:
-
Evan Quan authored
Enable peak profiling mode shader/memory clocks reporting for swsmu framework. Signed-off-by:
-
Evan Quan authored
The API is not in use. And it's unlikely to be used in the future either. Signed-off-by:
-
Sung Joon Kim authored
The missing DPCD definitions from DP2.0 spec is as follows: DOWNSPREAD_CTRL (107h): FIXED_VTOTAL_AS_SDP_EN_IN_PR_ACTIVE (bit 6) For sink devices that support Adaptive-Sync operation and Panel Replay DPRX_FEATURE_ENUMERATION_LIST_CONT_1 (2214h): ADAPTIVE_SYNC_SDP_SUPPORTED (bit 0) Bit to check sink device has Adaptive-Sync capability AS_SDP_FIRST_HALF_LINE_OR_3840_PIXEL_CYCLE_WINDOW_NOT_SUPPORTED (bit 1) A sink device that clears this bit will generate VSync pulse leading edge of the HDMI output on the line count at which Adaptive-Sync SDP is received as long as source device transmits Adaptive-Sync SDP either in first line or first 3840 pixel cycles of the line whichever occurs first. VSC_EXT_SDP_FRAMEWORK_VERSION_1_SUPPORTED (bit 4) Bit to check sink device has SDP framework version 1 capability Signed-off-by:
Sung Joon Kim <Sungjoon.Kim@amd.com> Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
Paulo Miguel Almeida authored
One-element arrays are deprecated, and we are replacing them with flexible array members instead. So, replace one-element array with flexible-array member in structs _ATOM_DISPLAY_OBJECT_PATH, _ATOM_DISPLAY_OBJECT_PATH_TABLE, _ATOM_OBJECT_TABLE, GOP_VBIOS_CONTENT _ATOM_GPIO_VOLTAGE_OBJECT_V3 and refactor the rest of the code accordingly. It's worth mentioning that doing a build before/after this patch results in no binary output differences. This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy() and help us make progress towards globally enabling -fstrict-flex-arrays=3 [1]. Link: https://github.com/KSPP/linux/issues/79 Link: https://github.com/KSPP/linux/issues/239 Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101836 [1] Signed-off-by:
Paulo Miguel Almeida <paulo.miguel.almeida.rodenas@gmail.com> Signed-off-by:
-
Tao Zhou authored
1. no need to query poison mode on SRIOV guest side, host can handle it. 2. define the function to simplify code. v2: rename amdgpu_ras_poison_mode_query to amdgpu_ras_query_poison_mode. Signed-off-by:
Tao Zhou <tao.zhou1@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Tao Zhou authored
Support VCN/JPEG RAS in both bare metal and SRIOV environment. v2: update commit description. Signed-off-by:
-
Tao Zhou authored
Injection on guest is not allowed. v2: return directly in SRIOV environment. Signed-off-by:
-
Tao Zhou authored
Inform host and let host handle consumption interrupt. Signed-off-by:
-
Tao Zhou authored
Send message to PF if VF receives RAS poison consumption interrupt. Signed-off-by:
-
Tao Zhou authored
Send handling request to host. Signed-off-by:
-
Tao Zhou authored
Send message to host and host will handle it. v2: split the patch into two parts, one is for mxgpu ai and another one is for common poison consumption handler. Signed-off-by:
-
Alvin Lee authored
[Description] - Current policy does not support HDMI VRR by default, so we cannot enable FPO / SubVP (DRR) cases Reviewed-by:
Nevenko Stupar <Nevenko.Stupar@amd.com> Reviewed-by:
Jun Lei <Jun.Lei@amd.com> Acked-by:
Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by:
Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by:
-
Aric Cyr authored
This version brings along following fixes: -Fix array index out of bound error -Speed up DML fast vadlaite -Implement multiple secure display -MST HDCP for multiple display -Add DPIA notification -Add support for three new square pattern variant Reviewed-by:
Bhawanpreet Lakha <bhawanpreet.lakha@amd.com> Acked-by:
Aric Cyr <aric.cyr@amd.com> Signed-off-by:
-
Fangzhi Zuo authored
[Why && How] On dcn32, HW supports odm transition in fast update. Hence this error message is considered false positive. Downgrade the error level to avoid catching unnecessary attention. Reviewed-by:
Dillon Varone <Dillon.Varone@amd.com> Acked-by:
Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by:
-
Wenjing Liu authored
[why] DP2.1 specs has brought 3 new variants of sqaure patterns with different pre-shoot and de-emphasis equalization requirements. The commit adds logic to identify these variants and apply corresponding eqaulization requirements into hardware lane settings. Reviewed-by:
George Shen <George.Shen@amd.com> Acked-by:
Wenjing Liu <wenjing.liu@amd.com> Signed-off-by:
-
Dillon Varone authored
[WHY] Subvp portion validation currently assumes that if vlevel provided does not support pstate, then none will, and so subvp is not used. [HOW] After get vlevel, use lowest vlevel that supports pstate if it exists, and use that for subvp validation. Reviewed-by:
-
Samson Tam authored
[Why] When we have a PSR display, we will not be requesting data from memory anymore. So we report back true for no memory request case. [How] Check for PSR by checking PSR version in link settings Reviewed-by:
Samson Tam <Samson.Tam@amd.com> Signed-off-by:
-
Alvin Lee authored
[Description] - When merging a pipe that was previously pipe split, we need to also clear the link resources or the next stream/plane that uses the pipe may have an incorrect link resource state Reviewed-by:
-
Mustapha Ghaddar authored
[WHY] Adding the new DPIA NOTIFY packets from DMUB As per the design with Cruise to account for 250ms response delay otherwise [HOW] Added th DPIA NOTIFY logic as per DMUB logic Reviewed-by:
Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by:
Mustapha Ghaddar <mghaddar@amd.com> Signed-off-by:
-
Roman Li authored
[Why] In case of failure to resume MST topology after suspend, an emtpty mst tree prevents further mst hub detection on the same connector. That causes the issue with MST hub hotplug after it's been unplug in suspend. [How] Stop topology manager on the connector after detecting DM_MST failure. Reviewed-by:
Wayne Lin <Wayne.Lin@amd.com> Acked-by:
Roman Li <roman.li@amd.com> Signed-off-by:
-
Wenjing Liu authored
[why] in dc_link_dp there still exist a few places where we call dio encoders without checking current enabled encoder type. The change is to make these places to call hwss equivalent functions so it won't mistakenly program a wrong type encoder. Reviewed-by:
-
Leo (Hanghong) Ma authored
Workaround no longer needed. Reviewed-by:
Chris Park <Chris.Park@amd.com> Acked-by:
Leo (Hanghong) Ma <hanghong.ma@amd.com> Signed-off-by:
-
Roman Li authored
[Why] Fixing smatch error: dm_resume() error: we previously assumed 'aconnector->dc_link' could be null [How] Check if dc_link null at the beginning of the loop, so further checks can be dropped. Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
Ian Chen authored
[WHY] It causes regression AMD source will not write DPCD 340. Reviewed-by:
Ian Chen <ian.chen@amd.com> Signed-off-by:
-
Alvin Lee authored
[Description] - FW scheduling algorithm doesn't take into account of it's a center timing - This affects where the subvp mclk switch can be scheduled (prevents HUBP vline interrupt from coming in if scheduled incorrectly) - Block subvp center timing cases for now Reviewed-by:
-
Dillon Varone authored
[Description] Modify soc BB to reduce expected sdp bandwidth and align with measurements to fix underflow issues. Reviewed-by:
-
Dillon Varone authored
[Description] Add debug bit to disable unbounded requesting. Reviewed-by:
-
Ilya Bakoulin authored
[Why] Iterating over every voltage state when we need to validate thousands of configurations all at once (i.e. display hotplug) can take a significant amount of time. [How] Check just the highest voltage state when fast_validate is true to verify whether the configuration can work at all, then do a proper validation including all voltage states later when fast_validate is false. Reviewed-by:
Ilya Bakoulin <Ilya.Bakoulin@amd.com> Signed-off-by:
-
Alan Liu authored
[Why] Fix problems when we disable secure_display. [How] - Reset secure display context after disabled - A secure_display_context is dedicate to a crtc, so we set the crtc for it when we create the context. Reviewed-by:
Alan Liu <HaoPing.Liu@amd.com> Signed-off-by:
-
Charlene Liu authored
This reverts commit c800d9ff. [why] revert for now because this change exposed other issue. Signed-off-by:
Charlene Liu <Charlene.Liu@amd.com> Signed-off-by:
-
Alan Liu authored
[Why] Current secure display only work with single display, now make it work with multiple displays. [How] Create secure_display_context for each crtc instance to store its own Region of Interest (ROI) information. v2: squash in warning fix (Alex) Reviewed-by:
-
Evan Quan authored
Update the reported maximum shader clock to the value which can be guarded to be achieved on all cards. This is to align with Window setting. Signed-off-by:
-
Evan Quan authored
Correct the pstate standard/peak profiling mode clock settings for SMU13.0.0. Signed-off-by:
-
Evan Quan authored
To better support UMD pstate profilings, the GPO feature needs to be switched on/off accordingly. Signed-off-by:
-
Evan Quan authored
To better support UMD pstate profilings, the GPO feature needs to be switched on/off accordingly. Signed-off-by:
-
- 14 Dec, 2022 1 commit
-
-
Christian König authored
This reverts commit f9d00a4a. This causes problem for KFD because when we overcommit we accidentially bind the BO to GTT for moving it into VRAM. We also need to make sure that this is done only as fallback after trying to evict first. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
