ASUS Vivobook S 15 is a laptop based on the Qualcomm Snapdragon X Elite
SoC (X1E78100).

Add the device tree for the laptop with support for the following features:

- CPU frequency scaling up to 3.4GHz
- NVMe storage on PCIe 6a (capable of Gen4x4, currently limited to Gen4x2)
- Keyboard and touchpad
- WCN7850 Wi-Fi
- Two Type-C ports on the left side (USB3 only in one orientation)
- internal eDP display
- ADSP and CDSP remoteprocs

Further details could be found in the cover letter.
Signed-off-by: Xilin Wu <wuxilin123@gmail.com>
Link: https://lore.kernel.org/r/20240701-asus-vivobook-s15-v4-2-ce7933b4d4e5@gmail.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add the compatible for this device.
Signed-off-by: Xilin Wu <wuxilin123@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240701-asus-vivobook-s15-v4-1-ce7933b4d4e5@gmail.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

According to downstream sources, maximum current for PMI632 VBUS
is 1A.

Taken from msm-4.19 (631561973a034e46ccacd0e53ef65d13a40d87a4)
Line 685-687 in drivers/power/supply/qcom/qpnp-smb5.c

Fixes: a06a2f12 ("arm64: dts: qcom: qrb4210-rb2: enable USB-C port handling")
Reviewed-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Dang Huynh <danct12@riseup.net>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240702-qrd4210rb2-vbus-volt-v3-1-fbd24661eec4@riseup.netSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Now that the venus clocks are fixed, we can add the DT node.
Signed-off-by: Pierre-Hugues Husson <phhusson@freebox.fr>
Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Acked-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Link: https://lore.kernel.org/r/6d86a6a3-4d99-4fda-9a38-7688587237e6@freebox.frSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Revision 3 of the sa8775p-ride board uses a different PHY for the two
ethernet ports and supports 2.5G speed. Create a new file for the board
reflecting the changes.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240627114212.25400-4-brgl@bgdev.plSigned-off-by: Bjorn Andersson <andersson@kernel.org>

In order to support multiple revisions of the sa8775p-ride board, create
a .dtsi containing the common parts and split out the ethernet bits into
the actual board file as they will change in revision 3.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240627114212.25400-3-brgl@bgdev.plSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Document the compatible for revision 3 of the sa8775p-ride board.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240627114212.25400-2-brgl@bgdev.plSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add appropriate mappings of Soundwire ports of WSA8845 speaker.  This
solves second (south) speaker sound distortions when playing audio.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240627122015.30945-3-krzysztof.kozlowski@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add appropriate mappings of Soundwire ports of WSA8845 speaker.  This
solves second (right) speaker sound distortions when playing audio.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240627122015.30945-2-krzysztof.kozlowski@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add appropriate mappings of Soundwire ports of WSA8845 speaker.  This
solves second (south) speaker sound distortions when playing audio.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240627122015.30945-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add appropriate mappings of Soundwire ports of WSA8845 speaker
to correctly map the Speaker ports to the WSA macro ports.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240627-topic-sm8650-upstream-was-port-mapping-v1-3-4700bcc2489a@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add appropriate mappings of Soundwire ports of WSA8845 speaker
to correctly map the Speaker ports to the WSA macro ports.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240627-topic-sm8650-upstream-was-port-mapping-v1-2-4700bcc2489a@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add appropriate mappings of Soundwire ports of WSA8845 speaker
to correctly map the Speaker ports to the WSA macro ports.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240627-topic-sm8650-upstream-was-port-mapping-v1-1-4700bcc2489a@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Without explicitly specifying names for the regulators they are named
based on the DeviceTree node name. This results in multiple regulators
with the same name, making debug prints and regulator_summary impossible
to reason about.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240627-fp4-regulator-name-v1-1-66931111a006@fairphone.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Correct the name for the thermal zone on PM8916 PMIC. I ended up with
c&p mistake, which wasn't noticed until the patch got merged.
Reported-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Fixes: b7a28d8a ("arm64: dts: qcom: pm8916: add temp-alarm thermal zone")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240701-fix-pm8916-tz-v1-1-02f8a713f577@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add the necessary dt nodes for gpu support in X1E80100.
Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240629015111.264564-6-quic_akhilpo@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

According to the power grid documentation, the 0.8v HS PHY shared
regulator is actually LDO3 from PM8550ve id J. Fix both CRD and QCP
boards.

Fixes: d7e03cce ("arm64: dts: qcom: x1e80100-crd: Enable more support")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240629-x1e80100-dts-fix-hsphy-0-8v-supplies-v1-1-de99ee030b27@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Rb3Gen2 has a lt9611uxc DSI-to-HDMI bridge on i2c0, with
reset gpio from pm7250b gpio2 and irq gpio from tlmm gpio24.
Bridge supplies are Vdd connected to input supply directly
and vcc to L11c. Enable HDMI output, bridge and corresponding
DSI output.
Signed-off-by: Venkata Prahlad Valluru <quic_vvalluru@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240528141954.7567-1-quic_vvalluru@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

These are documented and supported everywhere, but not described in DT.
Add them.
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240624120849.2550621-2-caleb.connolly@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add fastrpc nodes for ADSP and CDSP on X1E80100 SoC.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Link: https://lore.kernel.org/r/20240624100214.189991-1-quic_sibis@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add the CPU and LLCC BWMONs on X1E80100 SoCs.
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Link: https://lore.kernel.org/r/20240624092214.146935-5-quic_sibis@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add node to support mmc controller inside of IPQ6018.
This controller supports both eMMC and SD cards.

Tested with:
  eMMC (HS200)
  SD Card (SDR50/SDR104)
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20240620150122.1406631-3-amadeus@jmu.edu.cnSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add clocks which need to be enbaled for configuring
QoS on sc7280.
Signed-off-by: Odelu Kukatla <quic_okukatla@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20240607173927.26321-5-quic_okukatla@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add device nodes for video and camera clock controllers on Qualcomm
SM8650 platform.
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240602114439.1611-9-quic_jkona@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Merge the SM8650 video and clock controller drivers to gain access to
the constants from the DeviceTree binding.

Add support for the camera clock controller for camera clients to
be able to request for camcc clocks on SM8650 platform.
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Tested-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20240602114439.1611-8-quic_jkona@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add device tree bindings for the camera clock controller on
Qualcomm SM8650 platform.
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20240602114439.1611-7-quic_jkona@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Update the order of SC8280XP camcc header file in SM8450 camcc
bindings.
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20240602114439.1611-6-quic_jkona@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add support to the SM8650 video clock controller by extending
the SM8550 video clock controller, which is mostly identical
but SM8650 has few additional clocks and minor differences.
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240602114439.1611-5-quic_jkona@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add support for videocc XO clk ares for consumer drivers to be
able to request this reset.

Fixes: f53153a3 ("clk: qcom: videocc-sm8550: Add video clock controller driver for SM8550")
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240602114439.1611-4-quic_jkona@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

SM8650 video clock controller has most clocks same as SM8450,
but it also has few additional clocks and resets. Add device tree
bindings for the video clock controller on Qualcomm SM8650 platform
by defining these additional clocks and resets on top of SM8450.
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20240602114439.1611-3-quic_jkona@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Correct the videocc header file name in SM8450 videocc bindings.

Fixes: 1e910b2b ("dt-bindings: clock: qcom: Add SM8450 video clock controller")
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240602114439.1611-2-quic_jkona@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Define the themal zones using the temperature values in stage1 for this
platform so that the spmi-temp-alarm driver becomes active.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20240625-pm8916-tz-v1-1-a4c1f61e92dd@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add audio support to QCP platform which includes 2 x Speakers
Headset Mic and Headset support.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240624-qcp-audio-v1-1-323a6b5e1fe5@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add a 20MB reserved memory region for use by SCM calls.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240527-shm-bridge-v10-15-ce7afaa58d3a@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

With the smsm bindings and driver finally supporting mboxes, switch to
that and stop using apcs as syscon.
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240619-smsm-mbox-dts-v1-5-268ab7eef779@lucaweiss.euSigned-off-by: Bjorn Andersson <andersson@kernel.org>

With the smsm bindings and driver finally supporting mboxes, switch to
that and stop using apcs as syscon.
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240619-smsm-mbox-dts-v1-4-268ab7eef779@lucaweiss.euSigned-off-by: Bjorn Andersson <andersson@kernel.org>

With the smsm bindings and driver finally supporting mboxes, switch to
that and stop using apcs as syscon.
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240619-smsm-mbox-dts-v1-3-268ab7eef779@lucaweiss.euSigned-off-by: Bjorn Andersson <andersson@kernel.org>

With the smsm bindings and driver finally supporting mboxes, switch to
that and stop using apcs as syscon.
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240619-smsm-mbox-dts-v1-2-268ab7eef779@lucaweiss.euSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add tsens and thermal zones nodes for x1e80100 SoC.
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240621-x1e80100-dts-thermal-v3-1-abd6f416b609@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>