Merge tag 'livepatching-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching

Pull livepatching updates from Petr Mladek:

 - Forced transitions block only to-be-removed livepatches [Chengming]

 - Detect when ftrace handler could not be disabled in self-tests [David]

 - Calm down warning from a static analyzer [Tom]

* tag 'livepatching-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
  livepatch: Reorder to use before freeing a pointer
  livepatch: Don't block removal of patches that are safe to unload
  livepatch: Skip livepatch tests if ftrace cannot be configured

Pull xen updates from Juergen Gross:

 - A bunch of minor cleanups

 - A fix for kexec in Xen dom0 when executed on a high cpu number

 - A fix for resuming after suspend of a Xen guest with assigned PCI
   devices

 - A fix for a crash due to not disabled preemption when resuming as Xen
   dom0

* tag 'for-linus-5.18-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen: fix is_xen_pmu()
  xen: don't hang when resuming PCI device
  arch:x86:xen: Remove unnecessary assignment in xen_apic_read()
  xen/grant-table: remove readonly parameter from functions
  xen/grant-table: remove gnttab_*transfer*() functions
  drivers/xen: use helper macro __ATTR_RW
  x86/xen: Fix kerneldoc warning
  xen: delay xen_hvm_init_time_ops() if kdump is boot on vcpu>=32
  xen: use time_is_before_eq_jiffies() instead of open coding it

Pull tty/serial driver updates from Greg KH:
 "Here are the big set of tty and serial driver changes for 5.18-rc1.

  Nothing major, some more good cleanups from Jiri and 2 new serial
  drivers. Highlights include:

   - termbits cleanups

   - export symbol cleanups and other core cleanups from Jiri Slaby

   - new sunplus and mvebu uart drivers (amazing that people are still
     creating new uarts...)

   - samsung serial driver cleanups

   - ldisc 29 is now "reserved" for experimental/development line
     disciplines

   - lots of other tiny fixes and cleanups to serial drivers and
     bindings

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (104 commits)
  vt_ioctl: fix potential spectre v1 in VT_DISALLOCATE
  serial: 8250: fix XOFF/XON sending when DMA is used
  tty: serial: samsung: Add ARTPEC-8 support
  dt-bindings: serial: samsung: Add ARTPEC-8 UART
  serial: sc16is7xx: Clear RS485 bits in the shutdown
  tty: serial: samsung: simplify getting OF match data
  tty: serial: samsung: constify variables and pointers
  tty: serial: samsung: constify s3c24xx_serial_drv_data members
  tty: serial: samsung: constify UART name
  tty: serial: samsung: constify s3c24xx_serial_drv_data
  tty: serial: samsung: reduce number of casts
  tty: serial: samsung: embed s3c2410_uartcfg in parent structure
  tty: serial: samsung: embed s3c24xx_uart_info in parent structure
  serial: 8250_tegra: mark acpi_device_id as unused with !ACPI
  tty: serial: bcm63xx: use more precise Kconfig symbol
  serial: SERIAL_SUNPLUS should depend on ARCH_SUNPLUS
  tty: serial: jsm: fix two assignments in if conditions
  tty: serial: jsm: remove redundant assignments to variable linestatus
  serial: 8250_mtk: make two read-only arrays static const
  serial: samsung_tty: do not unlock port->lock for uart_write_wakeup()
  ...

Pull staging driver updates from Greg KH:
 "Here is the big set of staging driver updates for 5.18-rc1.

  Loads of tiny cleanups for almost all staging drivers in here, nothing
  major at all. Highlights include:

   - remove the ashmem Android driver. It is long-dead and if there are
     any legacy userspace applications still using it, the Android
     kernel images will maintain it, the community shouldn't care about
     it anymore

   - wfx wifi driver major cleanups. Should be ready to merge out of
     staging soon, and will coordinate with the wifi maintainers after
     -rc1 is out

   - major cleanups and unwinding of the layers of the r8188eu driver.
     It's amazing just how many unneeded layers of abstraction is in
     there, just when we think it's done, another is found...

   - lots of tiny coding style cleanups in many other staging drivers.

  All have been in linux-next for a while with no reported problems"

* tag 'staging-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (455 commits)
  staging: r8188eu: remove unnecessary memset in r8188eu
  staging: greybus: introduce pwm_ops::apply
  staging: rts5208: Resolve checkpatch.pl issues.
  staging: sm750fb: fix naming style
  staging: fbtft: Consider type of init sequence values in fbtft_init_display()
  staging: fbtft: Constify buf parameter in fbtft_dbg_hex()
  staging: mmal-vchiq: clear redundant item named bulk_scratch
  mips: dts: ralink: add MT7621 SoC
  staging: r8188eu: remove some unused local ieee80211 macros
  staging: r8188eu: make rtl8188e_process_phy_info static
  staging: r8188eu: remove unused function prototype
  staging: r8188eu: remove three unused receive defines
  staging: r8188eu: remove unnecessary initializations
  staging: rtl8192e: Fix spelling mistake "RESQUEST" -> "REQUEST"
  MAINTAINERS: remove the obsolete file entry for staging in ANDROID DRIVERS
  staging: r8188eu: proper error handling in rtw_init_drv_sw
  staging: r8188eu: call _cancel_timer_ex from _rtw_free_recv_priv
  staging: vt6656: Removed unused variable vt3342_vnt_threshold
  staging: vt6656: Removed unused variable bb_vga_0
  staging: remove ashmem
  ...

Merge tag 'driver-core-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is the set of driver core changes for 5.18-rc1.

  Not much here, primarily it was a bunch of cleanups and small updates:

   - kobj_type cleanups for default_groups

   - documentation updates

   - firmware loader minor changes

   - component common helper added and take advantage of it in many
     drivers (the largest part of this pull request).

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'driver-core-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (54 commits)
  Documentation: update stable review cycle documentation
  drivers/base/dd.c : Remove the initial value of the global variable
  Documentation: update stable tree link
  Documentation: add link to stable release candidate tree
  devres: fix typos in comments
  Documentation: add note block surrounding security patch note
  samples/kobject: Use sysfs_emit instead of sprintf
  base: soc: Make soc_device_match() simpler and easier to read
  driver core: dd: fix return value of __setup handler
  driver core: Refactor sysfs and drv/bus remove hooks
  driver core: Refactor multiple copies of device cleanup
  scripts: get_abi.pl: Fix typo in help message
  kernfs: fix typos in comments
  kernfs: remove unneeded #if 0 guard
  ALSA: hda/realtek: Make use of the helper component_compare_dev_name
  video: omapfb: dss: Make use of the helper component_compare_dev
  power: supply: ab8500: Make use of the helper component_compare_dev
  ASoC: codecs: wcd938x: Make use of the helper component_compare/release_of
  iommu/mediatek: Make use of the helper component_compare/release_of
  drm: of: Make use of the helper component_release_of
  ...

Pull char/misc and other driver updates from Greg KH:
 "Here is the big set of char/misc and other small driver subsystem
  updates for 5.18-rc1.

  Included in here are merges from driver subsystems which contain:

   - iio driver updates and new drivers

   - fsi driver updates

   - fpga driver updates

   - habanalabs driver updates and support for new hardware

   - soundwire driver updates and new drivers

   - phy driver updates and new drivers

   - coresight driver updates

   - icc driver updates

  Individual changes include:

   - mei driver updates

   - interconnect driver updates

   - new PECI driver subsystem added

   - vmci driver updates

   - lots of tiny misc/char driver updates

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (556 commits)
  firmware: google: Properly state IOMEM dependency
  kgdbts: fix return value of __setup handler
  firmware: sysfb: fix platform-device leak in error path
  firmware: stratix10-svc: add missing callback parameter on RSU
  arm64: dts: qcom: add non-secure domain property to fastrpc nodes
  misc: fastrpc: Add dma handle implementation
  misc: fastrpc: Add fdlist implementation
  misc: fastrpc: Add helper function to get list and page
  misc: fastrpc: Add support to secure memory map
  dt-bindings: misc: add fastrpc domain vmid property
  misc: fastrpc: check before loading process to the DSP
  misc: fastrpc: add secure domain support
  dt-bindings: misc: add property to support non-secure DSP
  misc: fastrpc: Add support to get DSP capabilities
  misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP
  misc: fastrpc: separate fastrpc device from channel context
  dt-bindings: nvmem: brcm,nvram: add basic NVMEM cells
  dt-bindings: nvmem: make "reg" property optional
  nvmem: brcm_nvram: parse NVRAM content into NVMEM cells
  nvmem: dt-bindings: Fix the error of dt-bindings check
  ...

Pull pin control updates from Linus Walleij:
 "No core changes this time. Just new driver code and improvements!

  New drivers:

   - New driver for the Broadcom BCM4908 SoC.

   - New subdriver for Tesla FSD (Full Self Driving) SoC, a derivative
     of the Samsung Exynos pin control driver.

   - New driver for the Amlogic Meson S4 SoC.

   - New driver for the Sunplus SP7021 SoC.

   - New driver for the Microsemi Ocelot family ServalT SoC.

   - New subdriver for Intel Alder Lake-M SoC.

   - New subdriver for Intel Ice Lake-N SoC, including PCH support.

   - New subdriver for Renesas R8A779F0 SoC.

   - New subdriver for Mediatek MT8186 SoC.

   - New subdriver for NXP Freescale i.MX93 SoC.

   - New driver for Nuvoton WPCM450 SoC.

   - New driver for Qualcomm SC8280XP SoC.

  Improvements:

   - Wakeup support on Samsung Exynos850 and ExynosAutov9.

   - Serious and voluminous maintenance cleanup and refactoring in the
     Renesas drivers. Mainly sharing similar data between the different
     SoC subdrivers.

   - Qualcomm SM8450 EGPIO support.

   - Drive strength support on the Mediatek MT8195.

   - Add some missing groups and functions to the Ralink RT2880"

* tag 'pinctrl-v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (188 commits)
  pinctrl: mediatek: common-v1: fix semicolon.cocci warnings
  pinctrl: nuvoton: wpcm450: Fix build error without OF
  pinctrl: qcom-pmic-gpio: Add support for pm8450
  dt-bindings: pinctrl: aspeed: Update gfx node in example
  dt-bindings: pinctrl: rt2880: add missing pin groups and functions
  pinctrl: ingenic: Fix regmap on X series SoCs
  pinctrl: nuvoton: Fix return value check in wpcm450_gpio_register()
  pinctrl: nuvoton: wpcm450: off by one in wpcm450_gpio_register()
  pinctrl: nuvoton: wpcm450: select GENERIC_PINCTRL_GROUPS
  pinctrl: nuvoton: Fix sparse warning
  pinctrl: mediatek: mt8186: Account for probe refactoring
  pinctrl: mediatek: common-v1: Commonize spec_ies_smt_set callback
  pinctrl: mediatek: common-v1: Commonize spec_pupd callback
  pinctrl: mediatek: common-v1: Use common probe function
  pinctrl: mediatek: common-v1: Add common probe function
  pinctrl: mediatek: paris: Unify probe function by using OF match data
  pinctrl/rockchip: Add missing of_node_put() in rockchip_pinctrl_probe
  pinctrl: nomadik: Add missing of_node_put() in nmk_pinctrl_probe
  pinctrl: berlin: fix error return code of berlin_pinctrl_build_state()
  pinctrl: qcom: Introduce sc8280xp TLMM driver
  ...

Halil Pasic points out [1] that the full revert of that commit (revert
in bddac7c1), and that a partial revert that only reverts the
problematic case, but still keeps some of the cleanups is probably
better.  

And that partial revert [2] had already been verified by Oleksandr
Natalenko to also fix the issue, I had just missed that in the long
discussion.

So let's reinstate the cleanups from commit aa6f8dcb ("swiotlb:
rework "fix info leak with DMA_FROM_DEVICE""), and effectively only
revert the part that caused problems.

Link: https://lore.kernel.org/all/20220328013731.017ae3e3.pasic@linux.ibm.com/ [1]
Link: https://lore.kernel.org/all/20220324055732.GB12078@lst.de/ [2]
Link: https://lore.kernel.org/all/4386660.LvFx2qVVIh@natalenko.name/ [3]
Suggested-by: Halil Pasic <pasic@linux.ibm.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Cc: Christoph Hellwig" <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The objcg is not cleared and put for kfence object when it is freed,
which could lead to memory leak for struct obj_cgroup and wrong
statistics of NR_SLAB_RECLAIMABLE_B or NR_SLAB_UNRECLAIMABLE_B.

Since the last freed object's objcg is not cleared,
mem_cgroup_from_obj() could return the wrong memcg when this kfence
object, which is not charged to any objcgs, is reallocated to other
users.

A real word issue [1] is caused by this bug.

Link: https://lore.kernel.org/all/000000000000cabcb505dae9e577@google.com/ [1]
Reported-by: syzbot+f8c45ccc7d5d45fc5965@syzkaller.appspotmail.com
Fixes: d3fb45f3 ("mm, kfence: insert KFENCE hooks for SLAB")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fixes: 70010521 ("Merge tag 'x86_core_for_5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Brown-paper-bag-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull landlock updates from Mickaël Salaün:
 "These two commits contain a minor fix for the sandboxer sample, and a
  Landlock ruleset FD name standardization"

* tag 'landlock-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
  landlock: Use square brackets around "landlock-ruleset"
  samples/landlock: Fix path_list memory leak

Pull mailbox updates from Jassi Brar:
 "qcom:
   - add support for MSM8976

  mtk:
   - enable mt8186
   - add ADSP controller driver

  ti:
   - use poll mode during suspend

  tegra:
   - fix tx channel flush

  imx:
   - add i.MX8 SECO MU support
   - prepare for, and add iMX93 support"

* tag 'mailbox-v5.18' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  dt-bindings: mailbox: add definition for mt8186
  mailbox: ti-msgmgr: Operate mailbox in polled mode during system suspend
  mailbox: ti-msgmgr: Refactor message read during interrupt handler
  mailbox: imx: support i.MX93 S401 MU
  mailbox: imx: support dual interrupts
  mailbox: imx: extend irq to an array
  dt-bindings: mailbox: imx-mu: add i.MX93 S4 MU support
  dt-bindings: mailbox: imx-mu: add i.MX93 MU
  mailbox: imx: add i.MX8 SECO MU support
  mailbox: imx: introduce rxdb callback
  dt-bindings: mailbox: imx-mu: add i.MX8 SECO MU support
  mailbox: imx: enlarge timeout while reading/writing messages to SCFW
  mailbox: imx: fix crash in resume on i.mx8ulp
  mailbox: imx: fix wakeup failure from freeze mode
  mailbox: mediatek: add support for adsp mailbox controller
  dt-bindings: mailbox: mtk,adsp-mbox: add mtk adsp-mbox document
  mailbox: qcom-apcs-ipc: Add compatible for MSM8976 SoC
  dt-bindings: mailbox: Add compatible for the MSM8976
  mailbox: tegra-hsp: Flush whole channel

Pull LED updates from Pavel Machek:
 "Nothing major here, there are two drivers that need review and did not
  make it into this round"

* tag 'leds-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds:
  leds: pca955x: Allow zero LEDs to be specified
  leds: pca955x: Make the gpiochip always expose all pins
  leds: simatic-ipc-leds: Don't directly deref ioremap_resource() returned ptr
  leds: simatic-ipc-leds: Make simatic_ipc_led_mem_res static
  leds: lm3692x: Return 0 from remove callback
  leds: sgm3140: Add ocs,ocp8110 compatible
  dt-bindings: vendor-prefixes: Add ocs prefix
  dt-bindings: leds: common: fix unit address in max77693 example

Merge tag 'perf-tools-for-v5.18-2022-03-26' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools updates from Arnaldo Carvalho de Melo:
 "New features:

  perf ftrace:

   - Add -n/--use-nsec option to the 'latency' subcommand.

     Default: usecs:

     $ sudo perf ftrace latency -T dput -a sleep 1
     #   DURATION     |      COUNT | GRAPH                          |
          0 - 1    us |    2098375 | #############################  |
          1 - 2    us |         61 |                                |
          2 - 4    us |         33 |                                |
          4 - 8    us |         13 |                                |
          8 - 16   us |        124 |                                |
         16 - 32   us |        123 |                                |
         32 - 64   us |          1 |                                |
         64 - 128  us |          0 |                                |
        128 - 256  us |          1 |                                |
        256 - 512  us |          0 |                                |

     Better granularity with nsec:

     $ sudo perf ftrace latency -T dput -a -n sleep 1
     #   DURATION     |      COUNT | GRAPH                          |
          0 - 1    us |          0 |                                |
          1 - 2    ns |          0 |                                |
          2 - 4    ns |          0 |                                |
          4 - 8    ns |          0 |                                |
          8 - 16   ns |          0 |                                |
         16 - 32   ns |          0 |                                |
         32 - 64   ns |          0 |                                |
         64 - 128  ns |    1163434 | ##############                 |
        128 - 256  ns |     914102 | #############                  |
        256 - 512  ns |        884 |                                |
        512 - 1024 ns |        613 |                                |
          1 - 2    us |         31 |                                |
          2 - 4    us |         17 |                                |
          4 - 8    us |          7 |                                |
          8 - 16   us |        123 |                                |
         16 - 32   us |         83 |                                |

  perf lock:

   - Add -c/--combine-locks option to merge lock instances in the same
     class into a single entry.

     # perf lock report -c
                    Name acquired contended avg wait(ns) total wait(ns) max wait(ns) min wait(ns)

           rcu_read_lock   251225         0            0              0            0            0
      hrtimer_bases.lock    39450         0            0              0            0            0
     &sb->s_type->i_l...    10301         1          662            662          662          662
        ptlock_ptr(page)    10173         2          701           1402          760          642
     &(ei->i_block_re...     8732         0            0              0            0            0
            &xa->xa_lock     8088         0            0              0            0            0
             &base->lock     6705         0            0              0            0            0
             &p->pi_lock     5549         0            0              0            0            0
     &dentry->d_lockr...     5010         4         1274           5097         1844          789
               &ep->lock     3958         0            0              0            0            0

      - Add -F/--field option to customize the list of fields to output:

     $ perf lock report -F contended,wait_max -k avg_wait
                     Name contended max wait(ns) avg wait(ns)

           slock-AF_INET6         1        23543        23543
        &lruvec->lru_lock         5        18317        11254
           slock-AF_INET6         1        10379        10379
               rcu_node_1         1         2104         2104
      &dentry->d_lockr...         1         1844         1844
      &dentry->d_lockr...         1         1672         1672
         &newf->file_lock        15         2279         1025
      &dentry->d_lockr...         1          792          792

   - Add --synth=no option for record, as there is no need to symbolize,
     lock names comes from the tracepoints.

  perf record:

   - Threaded recording, opt-in, via the new --threads command line
     option.

   - Improve AMD IBS (Instruction-Based Sampling) error handling
     messages.

  perf script:

   - Add 'brstackinsnlen' field (use it with -F) for branch stacks.

   - Output branch sample type in 'perf script'.

  perf report:

   - Add "addr_from" and "addr_to" sort dimensions.

   - Print branch stack entry type in 'perf report --dump-raw-trace'

   - Fix symbolization for chrooted workloads.

  Hardware tracing:

  Intel PT:

   - Add CFE (Control Flow Event) and EVD (Event Data) packets support.

   - Add MODE.Exec IFLAG bit support.

     Explanation about these features from the "Intel® 64 and IA-32
     architectures software developer’s manual combined volumes: 1, 2A,
     2B, 2C, 2D, 3A, 3B, 3C, 3D, and 4" PDF at:

        https://cdrdv2.intel.com/v1/dl/getContent/671200

     At page 3951:
      "32.2.4

       Event Trace is a capability that exposes details about the
       asynchronous events, when they are generated, and when their
       corresponding software event handler completes execution. These
       include:

        o Interrupts, including NMI and SMI, including the interrupt
          vector when defined.

        o Faults, exceptions including the fault vector.

           - Page faults additionally include the page fault address,
             when in context.

        o Event handler returns, including IRET and RSM.

        o VM exits and VM entries.¹

           - VM exits include the values written to the “exit reason”
             and “exit qualification” VMCS fields. INIT and SIPI events.

        o TSX aborts, including the abort status returned for the RTM
          instructions.

        o Shutdown.

       Additionally, it provides indication of the status of the
       Interrupt Flag (IF), to indicate when interrupts are masked"

  ARM CoreSight:

   - Use advertised caps/min_interval as default sample_period on ARM
     spe.

   - Update deduction of TRCCONFIGR register for branch broadcast on
     ARM's CoreSight ETM.

  Vendor Events (JSON):

  Intel:

   - Update events and metrics for: Alderlake, Broadwell, Broadwell DE,
     BroadwellX, CascadelakeX, Elkhartlake, Bonnell, Goldmont,
     GoldmontPlus, Westmere EP-DP, Haswell, HaswellX, Icelake, IcelakeX,
     Ivybridge, Ivytown, Jaketown, Knights Landing, Nehalem EP,
     Sandybridge, Silvermont, Skylake, Skylake Server, SkylakeX,
     Tigerlake, TremontX, Westmere EP-SP, and Westmere EX.

  ARM:

   - Add support for HiSilicon CPA PMU aliasing.

  perf stat:

   - Fix forked applications enablement of counters.

   - The 'slots' should only be printed on a different order than the
     one specified on the command line when 'topdown' events are
     present, fix it.

  Miscellaneous:

   - Sync msr-index, cpufeatures header files with the kernel sources.

   - Stop using some deprecated libbpf APIs in 'perf trace'.

   - Fix some spelling mistakes.

   - Refactor the maps pointers usage to pave the way for using refcount
     debugging.

   - Only offer the --tui option on perf top, report and annotate when
     perf was built with libslang.

   - Don't mention --to-ctf in 'perf data --help' when not linking with
     the required library, libbabeltrace.

   - Use ARRAY_SIZE() instead of ad hoc equivalent, spotted by
     array_size.cocci.

   - Enhance the matching of sub-commands abbreviations:
	'perf c2c rec' -> 'perf c2c record'
	'perf c2c recport -> error

   - Set build-id using build-id header on new mmap records.

   - Fix generation of 'perf --version' string.

  perf test:

   - Add test for the arm_spe event.

   - Add test to check unwinding using fame-pointer (fp) mode on arm64.

   - Make metric testing more robust in 'perf test'.

   - Add error message for unsupported branch stack cases.

  libperf:

   - Add API for allocating new thread map array.

   - Fix typo in perf_evlist__open() failure error messages in libperf
     tests.

  perf c2c:

   - Replace bitmap_weight() with bitmap_empty() where appropriate"

* tag 'perf-tools-for-v5.18-2022-03-26' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (143 commits)
  perf evsel: Improve AMD IBS (Instruction-Based Sampling) error handling messages
  perf python: Add perf_env stubs that will be needed in evsel__open_strerror()
  perf tools: Enhance the matching of sub-commands abbreviations
  libperf tests: Fix typo in perf_evlist__open() failure error messages
  tools arm64: Import cputype.h
  perf lock: Add -F/--field option to control output
  perf lock: Extend struct lock_key to have print function
  perf lock: Add --synth=no option for record
  tools headers cpufeatures: Sync with the kernel sources
  tools headers cpufeatures: Sync with the kernel sources
  perf stat: Fix forked applications enablement of counters
  tools arch x86: Sync the msr-index.h copy with the kernel sources
  perf evsel: Make evsel__env() always return a valid env
  perf build-id: Fix spelling mistake "Cant" -> "Can't"
  perf header: Fix spelling mistake "could't" -> "couldn't"
  perf script: Add 'brstackinsnlen' for branch stacks
  perf parse-events: Move slots only with topdown
  perf ftrace latency: Update documentation
  perf ftrace latency: Add -n/--use-nsec option
  perf tools: Fix version kernel tag
  ...

Pull memblock updates from Mike Rapoport:
 "Test suite and a small cleanup:

   - A small cleanup of unused variable in __next_mem_pfn_range_in_zone

   - Initial test suite to simulate memblock behaviour in userspace"

* tag 'memblock-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock: (27 commits)
  memblock tests: Add TODO and README files
  memblock tests: Add memblock_alloc_try_nid tests for bottom up
  memblock tests: Add memblock_alloc_try_nid tests for top down
  memblock tests: Add memblock_alloc_from tests for bottom up
  memblock tests: Add memblock_alloc_from tests for top down
  memblock tests: Add memblock_alloc tests for bottom up
  memblock tests: Add memblock_alloc tests for top down
  memblock tests: Add simulation of physical memory
  memblock tests: Split up reset_memblock function
  memblock tests: Fix testing with 32-bit physical addresses
  memblock: __next_mem_pfn_range_in_zone: remove unneeded local variable nid
  memblock tests: Add memblock_free tests
  memblock tests: Add memblock_add_node test
  memblock tests: Add memblock_remove tests
  memblock tests: Add memblock_reserve tests
  memblock tests: Add memblock_add tests
  memblock tests: Add memblock reset function
  memblock tests: Add skeleton of the memblock simulator
  tools/include: Add debugfs.h stub
  tools/include: Add pfn.h stub
  ...

Pull OpenRISC updates from Stafford Horne:
 "Not much for OpenRISC this merge window, I do have some things on the
  back burner like sparse warning cleanups and new defconfigs. But I
  didn't get time to polish the patches off for this round. There are
  OpenRISC updates coming in via other queues like removal of set_fs()
  and possibly new generic ticket locks.

  This just has a small fixup to remove duplicate initializer in memcpy
  from Kuniyuki Iwashima"

* tag 'for-linus' of https://github.com/openrisc/linux:
  openrisc/boot: Remove unnecessary initialisation in memcpy().

Pull x86 CET-IBT (Control-Flow-Integrity) support from Peter Zijlstra:
 "Add support for Intel CET-IBT, available since Tigerlake (11th gen),
  which is a coarse grained, hardware based, forward edge
  Control-Flow-Integrity mechanism where any indirect CALL/JMP must
  target an ENDBR instruction or suffer #CP.

  Additionally, since Alderlake (12th gen)/Sapphire-Rapids, speculation
  is limited to 2 instructions (and typically fewer) on branch targets
  not starting with ENDBR. CET-IBT also limits speculation of the next
  sequential instruction after the indirect CALL/JMP [1].

  CET-IBT is fundamentally incompatible with retpolines, but provides,
  as described above, speculation limits itself"

[1] https://www.intel.com/content/www/us/en/developer/articles/technical/software-security-guidance/technical-documentation/branch-history-injection.html

* tag 'x86_core_for_5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
  kvm/emulate: Fix SETcc emulation for ENDBR
  x86/Kconfig: Only allow CONFIG_X86_KERNEL_IBT with ld.lld >= 14.0.0
  x86/Kconfig: Only enable CONFIG_CC_HAS_IBT for clang >= 14.0.0
  kbuild: Fixup the IBT kbuild changes
  x86/Kconfig: Do not allow CONFIG_X86_X32_ABI=y with llvm-objcopy
  x86: Remove toolchain check for X32 ABI capability
  x86/alternative: Use .ibt_endbr_seal to seal indirect calls
  objtool: Find unused ENDBR instructions
  objtool: Validate IBT assumptions
  objtool: Add IBT/ENDBR decoding
  objtool: Read the NOENDBR annotation
  x86: Annotate idtentry_df()
  x86,objtool: Move the ASM_REACHABLE annotation to objtool.h
  x86: Annotate call_on_stack()
  objtool: Rework ASM_REACHABLE
  x86: Mark __invalid_creds() __noreturn
  exit: Mark do_group_exit() __noreturn
  x86: Mark stop_this_cpu() __noreturn
  objtool: Ignore extra-symbol code
  objtool: Rename --duplicate to --lto
  ...

drivers/pinctrl/mediatek/pinctrl-mtk-common.c:171:2-3: Unneeded semicolon

 Remove unneeded semicolon.

Generated by: scripts/coccinelle/misc/semicolon.cocci

Fixes: 156f7217 ("pinctrl: mediatek: common-v1: Commonize spec_ies_smt_set callback")
CC: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20220322130308.GA21877@65fc916127a5Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Pull trace event string verifier fix from Steven Rostedt:
 "The run-time string verifier checks all trace event formats as
  they are read from the tracing file to make sure that the %s pointers
  are not reading something that no longer exists.

  However, it failed to account for the valid case of '%*.s' where the
  length given is zero, and the string is NULL. It incorrectly flagged
  it as a null pointer dereference and gave a WARN_ON()"

* tag 'trace-v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Have trace event string test handle zero length strings

Pull USB/Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt changes for 5.18-rc1.

  Nothing major in here, just lots of little improvements and cleanups
  and new device support. Highlights are:

   - list iterator fixups for when we walk past the end of the list (a
     common problem that was cut/pasted in almost all USB gadget
     drivers)

   - xen USB driver "hardening" for malicious hosts

   - xhci driver updates and fixes for more hardware types

   - xhci debug cable fixes to make it actually work again

   - usb gadget audio driver improvements

   - usb gadget storage fixes to work with OS-X

   - lots of other small usb gadget fixes and updates

   - USB DWC3 driver improvements for more hardware types

   - Lots of other small USB driver improvements

   - DTS updates for some USB platforms

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits)
  usb: gadget: fsl_qe_udc: Add missing semicolon in qe_ep_dequeue()
  dt-bindings: usb: mtk-xhci: add compatible for mt8186
  usb: dwc3: Issue core soft reset before enabling run/stop
  usb: gadget: Makefile: remove ccflags-y
  USB: usb-storage: Fix use of bitfields for hardware data in ene_ub6250.c
  usb: gadget: eliminate anonymous module_init & module_exit
  usb: usbip: eliminate anonymous module_init & module_exit
  xen/usb: harden xen_hcd against malicious backends
  usb: dwc3: gadget: Wait for ep0 xfers to complete during dequeue
  usb: dwc3: gadget: move cmd_endtransfer to extra function
  usb: dwc3: gadget: ep_queue simplify isoc start condition
  xen/usb: don't use arbitrary_virt_to_machine()
  usb: isp1760: remove redundant max_packet() macro
  usb: oxu210hp-hcd: remove redundant call to max_packet() macro
  usb: common: usb-conn-gpio: Make VBUS supply completely optional
  USB: storage: ums-realtek: fix error code in rts51x_read_mem()
  usb: early: xhci-dbc: Fix xdbc number parsing
  usb: early: xhci-dbc: Remove duplicate keep parsing
  x86/tsc: Be consistent about use_tsc_delay()
  usb: gadget: udc: s3c2410: remove usage of list iterator past the loop body
  ...

Pull i2c updates from Wolfram Sang:

 - tracepoints when Linux acts as an I2C client

 - added support for AMD PSP

 - whole subsystem now uses generic_handle_irq_safe()

 - piix4 driver gained MMIO access enabling so far missed controllers
   with AMD chipsets

 - a bulk of device driver updates, refactorization, and fixes.

* 'i2c/for-mergewindow' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (61 commits)
  i2c: mux: demux-pinctrl: do not deactivate a master that is not active
  i2c: meson: Fix wrong speed use from probe
  i2c: add tracepoints for I2C slave events
  i2c: designware: Remove code duplication
  i2c: cros-ec-tunnel: Fix syntax errors in comments
  MAINTAINERS: adjust XLP9XX I2C DRIVER after removing the devicetree binding
  i2c: designware: Mark dw_i2c_plat_{suspend,resume}() as __maybe_unused
  i2c: mediatek: Add i2c compatible for Mediatek MT8168
  dt-bindings: i2c: update bindings for MT8168 SoC
  i2c: mt65xx: Simplify with clk-bulk
  i2c: i801: Drop two outdated comments
  i2c: xiic: Make bus names unique
  i2c: i801: Add support for the Process Call command
  i2c: i801: Drop useless masking in i801_access
  i2c: tegra: Add SMBus block read function
  i2c: designware: Use the i2c_mark_adapter_suspended/resumed() helpers
  i2c: designware: Lock the adapter while setting the suspended flag
  i2c: mediatek: remove redundant null check
  i2c: mediatek: modify bus speed calculation formula
  i2c: designware: Fix improper usage of readl
  ...

Pull iomap fixlet from Andreas Gruenbacher:
 "Fix buffered write page prefaulting.

  I forgot to send it the previous merge window. I've only improved the
  patch description since"

* tag 'write-page-prefaulting' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  fs/iomap: Fix buffered write page prefaulting

Pull array-bounds updates from Kees Cook:
 "This enables -Warray-bounds and -Wzero-length-bounds, now that the
  many bug fixes have landed all over the place in the kernel, and in
  GCC itself[1].

  A couple fixes[2] for known corner-case issues currently live in my
  "pending-fixes" tree which I'm expecting to send next week if other
  maintainers still haven't picked them up.

  I'm also expecting we can enable -Wstringop-overflow next cycle, as
  there are only a few stragglers[3], but it might even be possible for
  this release"

[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99578
[2] https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git/commit/?h=for-next/pending-fixes&id=2d253138910eec553fc706379914243d71de9b85
[3] https://github.com/KSPP/linux/issues/181

* tag 'array-bounds-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  Makefile: Enable -Wzero-length-bounds
  Makefile: Enable -Warray-bounds

Pull FORTIFY_SOURCE updates from Kees Cook:
 "This series consists of two halves:

   - strict compile-time buffer size checking under FORTIFY_SOURCE for
     the memcpy()-family of functions (for extensive details and
     rationale, see the first commit)

   - enabling FORTIFY_SOURCE for Clang, which has had many overlapping
     bugs that we've finally worked past"

* tag 'memcpy-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  fortify: Add Clang support
  fortify: Make sure strlen() may still be used as a constant expression
  fortify: Use __diagnose_as() for better diagnostic coverage
  fortify: Make pointer arguments const
  Compiler Attributes: Add __diagnose_as for Clang
  Compiler Attributes: Add __overloadable for Clang
  Compiler Attributes: Add __pass_object_size for Clang
  fortify: Replace open-coded __gnu_inline attribute
  fortify: Update compile-time tests for Clang 14
  fortify: Detect struct member overflows in memset() at compile-time
  fortify: Detect struct member overflows in memmove() at compile-time
  fortify: Detect struct member overflows in memcpy() at compile-time

Pull block layer 64-bit data integrity support from Jens Axboe:
 "This adds support for 64-bit data integrity in the block layer and in
  NVMe"

* tag 'for-5.18/64bit-pi-2022-03-25' of git://git.kernel.dk/linux-block:
  crypto: fix crc64 testmgr digest byte order
  nvme: add support for enhanced metadata
  block: add pi for extended integrity
  crypto: add rocksoft 64b crc guard tag framework
  lib: add rocksoft model crc64
  linux/kernel: introduce lower_48_bits function
  asm-generic: introduce be48 unaligned accessors
  nvme: allow integrity on extended metadata formats
  block: support pi with extended metadata

Pull bio allocation fix from Jens Axboe:
 "We got some reports of users seeing:

	Unexpected gfp: 0x2 (__GFP_HIGHMEM). Fixing up to gfp: 0x1192888

  which is a regression caused by the bio allocation cleanups"

* tag 'for-5.18/alloc-cleanups-2022-03-25' of git://git.kernel.dk/linux-block:
  fs: do not pass __GFP_HIGHMEM to bio_alloc in do_mpage_readpage

Pull NVMe write streams removal from Jens Axboe:
 "This removes the write streams support in NVMe. No vendor ever really
  shipped working support for this, and they are not interested in
  supporting it.

  With the NVMe support gone, we have nothing in the tree that supports
  this. Remove passing around of the hints.

  The only discussion point in this patchset imho is the fact that the
  file specific write hint setting/getting fcntl helpers will now return
  -1/EINVAL like they did before we supported write hints. No known
  applications use these functions, I only know of one prototype that I
  help do for RocksDB, and that's not used. That said, with a change
  like this, it's always a bit controversial. Alternatively, we could
  just make them return 0 and pretend it worked. It's placement based
  hints after all"

* tag 'for-5.18/write-streams-2022-03-18' of git://git.kernel.dk/linux-block:
  fs: remove fs.f_write_hint
  fs: remove kiocb.ki_hint
  block: remove the per-bio/request write hint
  nvme: remove support or stream based temperature hint

Pull devicetree updates from Rob Herring:

 - Add Krzysztof Kozlowski as co-maintainer for DT bindings providing
   much needed help.

 - DT schema validation now takes DTB files as input rather than
   intermediate YAML files. This decouples the validation from the
   source level syntax information. There's a bunch of schema fixes as a
   result of switching to DTB based validation which exposed some errors
   and incomplete schemas and examples.

 - Kbuild improvements to explicitly warn users running 'make
   dt_binding_check' on missing yamllint

 - Expand DT_SCHEMA_FILES kbuild variable to take just a partial
   filename or path instead of the full path to 1 file.

 - Convert various bindings to schema format: mscc,vsc7514-switch,
   multiple GNSS bindings, ahci-platform, i2c-at91, multiple UFS
   bindings, cortina,gemini-sata-bridge, cortina,gemini-ethernet, Atmel
   SHA, Atmel TDES, Atmel AES, armv7m-systick, Samsung Exynos display
   subsystem, nuvoton,npcm7xx-timer, samsung,s3c2410-i2c, zynqmp_dma,
   msm/mdp4, rda,8810pl-uart

 - New schemas for u-boot environment variable partition, TI clksel

 - New compatible strings for Renesas RZ/V2L SoC

 - Vendor prefixes for Xen, HPE, deprecated Synopsys, deprecated
   HiSilicon

 - Add/fix schemas for QEMU Arm 'virt' machine

 - Drop unused of_alias_get_alias_list() function

 - Add a script to check DT unittest EXPECT message output. Pass
   messages also now print by default at PR_INFO level to help test
   automation.

* tag 'devicetree-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (96 commits)
  dt-bindings: kbuild: Make DT_SCHEMA_LINT a recursive variable
  dt-bindings: nvmem: add U-Boot environment variables binding
  dt-bindings: ufs: qcom: Add SM6350 compatible string
  dt-bindings: dmaengine: sifive,fu540-c000: include generic schema
  dt-bindings: gpio: pca95xx: drop useless consumer example
  Revert "of: base: Introduce of_alias_get_alias_list() to check alias IDs"
  dt-bindings: virtio,mmio: Allow setting devices 'dma-coherent'
  dt-bindings: gnss: Add two more chips
  dt-bindings: gnss: Rewrite sirfstar binding in YAML
  dt-bindings: gnss: Modify u-blox to use common bindings
  dt-bindings: gnss: Rewrite common bindings in YAML
  dt-bindings: ata: ahci-platform: Add rk3568-dwc-ahci compatible
  dt-bindings: ata: ahci-platform: Add power-domains property
  dt-bindings: ata: ahci-platform: Convert DT bindings to yaml
  dt-bindings: kbuild: Use DTB files for validation
  dt-bindings: kbuild: Pass DT_SCHEMA_FILES to dt-validate
  dt-bindings: Add QEMU virt machine compatible
  dt-bindings: arm: Convert QEMU fw-cfg to DT schema
  dt-bindings: i2c: at91: Add SAMA7G5 compatible strings list
  dt-bindings: i2c: convert i2c-at91 to json-schema
  ...

This reverts commit aa6f8dcb.

It turns out this breaks at least the ath9k wireless driver, and
possibly others.

What the ath9k driver does on packet receive is to set up the DMA
transfer with:

  int ath_rx_init(..)
  ..
                bf->bf_buf_addr = dma_map_single(sc->dev, skb->data,
                                                 common->rx_bufsize,
                                                 DMA_FROM_DEVICE);

and then the receive logic (through ath_rx_tasklet()) will fetch
incoming packets

  static bool ath_edma_get_buffers(..)
  ..
        dma_sync_single_for_cpu(sc->dev, bf->bf_buf_addr,
                                common->rx_bufsize, DMA_FROM_DEVICE);

        ret = ath9k_hw_process_rxdesc_edma(ah, rs, skb->data);
        if (ret == -EINPROGRESS) {
                /*let device gain the buffer again*/
                dma_sync_single_for_device(sc->dev, bf->bf_buf_addr,
                                common->rx_bufsize, DMA_FROM_DEVICE);
                return false;
        }

and it's worth noting how that first DMA sync:

    dma_sync_single_for_cpu(..DMA_FROM_DEVICE);

is there to make sure the CPU can read the DMA buffer (possibly by
copying it from the bounce buffer area, or by doing some cache flush).
The iommu correctly turns that into a "copy from bounce bufer" so that
the driver can look at the state of the packets.

In the meantime, the device may continue to write to the DMA buffer, but
we at least have a snapshot of the state due to that first DMA sync.

But that _second_ DMA sync:

    dma_sync_single_for_device(..DMA_FROM_DEVICE);

is telling the DMA mapping that the CPU wasn't interested in the area
because the packet wasn't there.  In the case of a DMA bounce buffer,
that is a no-op.

Note how it's not a sync for the CPU (the "for_device()" part), and it's
not a sync for data written by the CPU (the "DMA_FROM_DEVICE" part).

Or rather, it _should_ be a no-op.  That's what commit aa6f8dcb
broke: it made the code bounce the buffer unconditionally, and changed
the DMA_FROM_DEVICE to just unconditionally and illogically be
DMA_TO_DEVICE.

[ Side note: purely within the confines of the swiotlb driver it wasn't
  entirely illogical: The reason it did that odd DMA_FROM_DEVICE ->
  DMA_TO_DEVICE conversion thing is because inside the swiotlb driver,
  it uses just a swiotlb_bounce() helper that doesn't care about the
  whole distinction of who the sync is for - only which direction to
  bounce.

  So it took the "sync for device" to mean that the CPU must have been
  the one writing, and thought it meant DMA_TO_DEVICE. ]

Also note how the commentary in that commit was wrong, probably due to
that whole confusion, claiming that the commit makes the swiotlb code

                                  "bounce unconditionally (that is, also
    when dir == DMA_TO_DEVICE) in order do avoid synchronising back stale
    data from the swiotlb buffer"

which is nonsensical for two reasons:

 - that "also when dir == DMA_TO_DEVICE" is nonsensical, as that was
   exactly when it always did - and should do - the bounce.

 - since this is a sync for the device (not for the CPU), we're clearly
   fundamentally not coping back stale data from the bounce buffers at
   all, because we'd be copying *to* the bounce buffers.

So that commit was just very confused.  It confused the direction of the
synchronization (to the device, not the cpu) with the direction of the
DMA (from the device).
Reported-and-bisected-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Reported-by: Olha Cherevyk <olha.cherevyk@gmail.com>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Toke Høiland-Jørgensen <toke@toke.dk>
Cc: Maxime Bizon <mbizon@freebox.fr>
Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Improve the error message returned on failed perf_event_open() on AMD
systems when using IBS (Instruction-Based Sampling).

Output of executing 'perf record -e ibs_op// true' as a non root user
BEFORE this patch (perf will add the 'u' modifier at the end to exclude
kernel/hypervisor sampling):

  The sys_perf_event_open() syscall returned with 22 (Invalid argument)for event (ibs_op//u).
  /bin/dmesg | grep -i perf may provide additional information.

Output after:

  AMD IBS can't exclude kernel events.  Try running at a higher privilege level.

Output of executing 'sudo perf record -e ibs_op// true' BEFORE this patch:

  Error:
  The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (ibs_op//).
  /bin/dmesg | grep -i perf may provide additional information.

Output after:

  Error:
  Invalid event (ibs_op//) in per-thread mode, enable system wide with '-a'.

Folowing the suggestion:

  $ sudo perf record -a -e ibs_op// true
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 1.664 MB perf.data (194 samples) ]
  $
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: João Martins <joao.m.martins@oracle.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20220322221517.2510440-12-eranian@google.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The AMD IBS error message enhancements will use these, but we're not
using evsel__open_strerror() in the python binding so far.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

We support short command 'rec*' for 'record' and 'rep*' for 'report' in
lots of sub-commands, but the matching is not quite strict currnetly.

It may be puzzling sometime, like we mis-type a 'recport' to report but
it will perform 'record' in fact without any message.

To fix this, add a check to ensure that the short cmd is valid prefix
of the real command.

Committer testing:

  [root@quaco ~]# perf c2c re sleep 1

   Usage: perf c2c {record|report}

      -v, --verbose         be more verbose (show counter open errors, etc)

  # perf c2c rec sleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.038 MB perf.data (16 samples) ]
  # perf c2c recport sleep 1

   Usage: perf c2c {record|report}

      -v, --verbose         be more verbose (show counter open errors, etc)

  # perf c2c record sleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.038 MB perf.data (15 samples) ]
  # perf c2c records sleep 1

   Usage: perf c2c {record|report}

      -v, --verbose         be more verbose (show counter open errors, etc)

  #
Signed-off-by: Wei Li <liwei391@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Rui Xiang <rui.xiang@huawei.com>
Link: http://lore.kernel.org/lkml/20220325092032.2956161-1-liwei391@huawei.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

This patch corrects typos in error messages. I should be "evlist", not
"evsel" as the function that fails is perf_evlist__open().

Fixes: 3ce311af ("libperf: Move to tools/lib/perf")
Fixes: a7f3713f ("libperf tests: Add test_stat_multiplexing test")
Signed-off-by: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220325043829.224045-2-nakamura.shun@fujitsu.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Bring-in the kernel's arch/arm64/include/asm/cputype.h into tools/
for arm64 to make use of all the core-type definitions in perf.

Replace sysreg.h with the version already imported into tools/.

Committer notes:

Added an entry to tools/perf/check-headers.sh, so that we get notified
when the original file in the kernel sources gets modified.

Tester notes:

LGTM. I did the testing on both my x86 and Arm64 platforms, thanks for
the fixing up.
Signed-off-by: Ali Saidi <alisaidi@amazon.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrew Kilroy <andrew.kilroy@arm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick.Forrington@arm.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20220324183323.31414-2-alisaidi@amazon.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Pull IPMI updates from Corey Minyard:

 - Little fixes for various things people have noticed.

 - One enhancement, the IPMI over IPMB (I2c) is modified to allow it to
   take a separate sender and receiver device. The Raspberry Pi has an
   I2C slave device that cannot send.

* tag 'for-linus-5.17-1' of https://github.com/cminyard/linux-ipmi:
  ipmi: initialize len variable
  ipmi: kcs: aspeed: Remove old bindings support
  ipmi:ipmb: Add the ability to have a separate slave and master device
  ipmi:ipmi_ipmb: Unregister the SMI on remove
  ipmi: kcs: aspeed: Add AST2600 compatible string
  ipmi: ssif: replace strlcpy with strscpy
  ipmi/watchdog: Constify ident
  ipmi: Add the git repository to the MAINTAINERS file

Pull reiserfs updates from Jan Kara:
 "The biggest change in this pull is the addition of a deprecation
  message about reiserfs with the outlook that we'd eventually be able
  to remove it from the kernel. Because it is practically unmaintained
  and untested and odd enough that people don't want to bother with it
  anymore...

  Otherwise there are small udf and ext2 fixes"

* tag 'fs_for_v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  udf: remove redundant assignment of variable etype
  reiserfs: Deprecate reiserfs
  ext2: correct max file size computing
  reiserfs: get rid of AOP_FLAG_CONT_EXPAND flag

Pull fsnotify updates from Jan Kara:
 "A few fsnotify improvements and cleanups"

* tag 'fsnotify_for_v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  fsnotify: remove redundant parameter judgment
  fsnotify: optimize FS_MODIFY events with no ignored masks
  fsnotify: fix merge with parent's ignored mask

Pull drm fixes from Dave Airlie:
 "Some fixes were queued up in and in light of the fbdev regressions,
  I've pulled those in as well.

  core:
   - Make audio and color plane support checking only happen when a CEA
     extension block is found.
   - Small selftest fix.

  fbdev:
   - two regressions fixes from speedup patches.

  ttm:
   - Fix a small regression from ttm_resource_fini()

  i915:
   - Reject unsupported TMDS rates on ICL+
   - Treat SAGV block time 0 as SAGV disabled
   - Fix PSF GV point mask when SAGV is not possible
   - Fix renamed INTEL_INFO->media.arch/ver field"

* tag 'drm-next-2022-03-25' of git://anongit.freedesktop.org/drm/drm:
  fbdev: Fix cfb_imageblit() for arbitrary image widths
  fbdev: Fix sys_imageblit() for arbitrary image widths
  drm/edid: fix CEA extension byte #3 parsing
  drm/edid: check basic audio support on CEA extension block
  drm/i915: Fix renamed struct field
  drm/i915: Fix PSF GV point mask when SAGV is not possible
  drm/i915: Treat SAGV block time 0 as SAGV disabled
  drm/i915: Reject unsupported TMDS rates on ICL+
  drm/selftest: plane_helper: Put test structures in static storage
  drm/ttm: Fix a kernel oops due to an invalid read

Pull backlight updates from Lee Jones:
 "New Device Support:
   - Add support for PM6150L to Qualcomm WLED

  Fix-ups"
   - Use kcalloc() to avoid open-coding; pwm_bl
   - Device Tree changes; qcom-wled
   - Cleanup or simplify code; backlight"

* tag 'backlight-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: backlight: Slighly simplify devm_of_find_backlight()
  backlight: qcom-wled: Add PM6150L compatible
  dt-bindings: backlight: qcom-wled: Add PM6150L compatible
  backlight: pwm_bl: Avoid open coded arithmetic in memory allocation