- 28 Jan, 2014 10 commits
-
-
Ville Syrjälä authored
WaApplyL3ControlAndL3ChickenMode is only relevant to early HSW steppings.. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
WaDisableRCZUnitClockGating was needed with early HSW steppings only. Signed-off-by:
-
Ville Syrjälä authored
Someone copy pasted the comment from the SNB code w/o reading it. We never actually implemented the workaround to disable RCPB unit clock gating on IVB. It would have been needed for early steppings, but we don't care about those anymore, so just remove the stale comment. Signed-off-by:
-
Ville Syrjälä authored
Can't find WaDisableRHWOOptimizationForRenderHang listed for VLV. Signed-off-by:
-
Ville Syrjälä authored
Can't find WaDisableRHWOOptimizationForRenderHang listed for HSW. Signed-off-by:
-
Ville Syrjälä authored
WaDisableRCCUnitClockGating is only relevant for SNB. Signed-off-by:
-
Ville Syrjälä authored
WaDisableRCCUnitClockGating is only relevant for SNB. Signed-off-by:
-
Ville Syrjälä authored
Can't find any mention of WaDisableVDSUnitClockGating ever being relevant for SNB. Remove it. Signed-off-by:
-
Ville Syrjälä authored
Signed-off-by:
-
Ben Widawsky authored
There are cases where we want to know if there is a full, or aliased PPGTT. Currently, in fact the only distinction we ever need to make is when we're using full PPGTT. This patch is simply to promote readability and clarify for the confusing existing usage where "aliasing" meant aliasing and full. v2: Remove USES_ALIASING_PPGTT since there are currently no cases where we need to check if we're using aliasing, but not full PPGTT. (Daniel) Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
Ben Widawsky <ben@bwidawsk.net> Signed-off-by:
-
- 27 Jan, 2014 15 commits
-
-
Jani Nikula authored
Having to use i915.i915_foo is inconsistent and a bit on the verbose side. Drop the prefix per Daniel's request, who also says this is not ABI we need to maintain. Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Daniel Vetter authored
At least I couldn't find it in the Haswell Bspec any more and we've tried to test-boot a Haswell machine with num_pipes forced to 0 (i.e. hit the PCH_NOP path) and the unclaimed register logic complained. So restrict this dance to just ivb platforms. v2: Art pointed out that the bits simply moved on hsw+ v3: Buy code terseneness with a notch of sublety as suggested by Chris. v4: Frob the right bit, spotted by Art. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Arthur Ranyan <arthur.j.runyan@intel.com> Cc: Dave Airlie <airlied@gmail.com> Reviewed-by:
Art Runyan <arthur.j.runyan@intel.com> Signed-off-by:
-
Damien Lespiau authored
A lot of the WM functions are only reading from that structure and are already using const. While converting the code to use dev_priv instead of dev, I noticed a few places where we can give that hint. Signed-off-by:
Damien Lespiau <damien.lespiau@intel.com> Reviewed-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
-
Jani Nikula authored
With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by:
-
Ville Syrjälä authored
WaMiSetContext_Hang tells us that a MI_NOOP must follow MI_SET_CONTEXT. The other thing WaMiSetContext_Hang seems to say is that URB_FENCE isn't allowed to straddle two cachelines. But we don't issue those from the kernel so we don't care. Signed-off-by:
-
Ville Syrjälä authored
Signed-off-by:
-
Ville Syrjälä authored
WaApplyL3ControlAndL3ChickenMode is only listed for IVB and HSW in W/A database and BSpec. Signed-off-by:
-
Ville Syrjälä authored
Signed-off-by:
-
Ville Syrjälä authored
The w/a database lists both WaPsdDispatchEnable and WaDisablePSDDualDispatchEnable for VLV. They appear to be the same thing, so list both names. Signed-off-by:
-
Ville Syrjälä authored
Signed-off-by:
-
Ville Syrjälä authored
Signed-off-by:
-
Chris Wilson authored
Many times in the past we have concluded that the cause of the GPU hang has been that the hw status page was stale, usually because the GPU and CPU disagreed over the address of the page. Having stumbled across yet another issue that seems to be related to the HWSP, it is time to include that information in the GPU error dump. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
Chris Wilson authored
Through a twisty and circuituous path it is possible to currently trick the code into creating a default context and forgetting to pin it immediately into the GGTT. (This requires a system using contexts without an aliasing ppgtt, which is currently restricted to Baytrails machines manually specifying a module parameter to force enable contexts, or on Sandybridge and later that manually disable the aliasing ppgtt.) The consequence is that during module unload we attempt to unpin the default context twice and encounter a BUG remonstrating that we attempt to unpin an unbound object. [ 161.002869] Kernel BUG at f84861f8 [verbose debug info unavailable] [ 161.002875] invalid opcode: 0000 [#1] SMP [ 161.002882] Modules linked in: coretemp kvm_intel kvm crc32_pclmul aesni_intel aes_i586 xts lrw gf128mul ablk_helper cryptd hid_sensor_accel_3d hid_sensor_gyro_3d hid_sensor_magn_3d hid_sensor_trigger industrialio_triggered_buffer kfifo_buf industrialio hid_sensor_iio_common snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_page_alloc snd_seq_midi snd_seq_midi_event dm_multipath scsi_dh asix ppdev usbnet snd_rawmidi mii hid_sensor_hub microcode snd_seq rfcomm bnep snd_seq_device bluetooth snd_timer snd parport_pc binfmt_misc soundcore dw_dmac_pci dw_dmac_core mac_hid lp parport dm_mirror dm_region_hash dm_log hid_generic usbhid hid i915(O-) drm_kms_helper(O) igb dca ptp pps_core i2c_algo_bit drm(O) ahci libahci video [ 161.002991] CPU: 0 PID: 2114 Comm: rmmod Tainted: G W O 3.13.0-rc8+ #2 [ 161.002997] Hardware name: NEXCOM VTC1010/Aptio CRB, BIOS 5.6.5 09/24/2013 [ 161.003004] task: dbdd6800 ti: dbe0e000 task.ti: dbe0e000 [ 161.003010] EIP: 0060:[<f84861f8>] EFLAGS: 00010246 CPU: 0 [ 161.003044] EIP is at i915_gem_object_ggtt_unpin+0x88/0x90 [i915] [ 161.003050] EAX: dfce3840 EBX: 00000000 ECX: dfafd690 EDX: dfce3874 [ 161.003056] ESI: c0086b40 EDI: df962e00 EBP: dbe0fe1c ESP: dbe0fe0c [ 161.003062] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 161.003068] CR0: 8005003b CR2: b7718000 CR3: 1bec0000 CR4: 001007f0 [ 161.003076] Stack: [ 161.003081] 00afc014 00000004 c0086b40 dfafc000 dbe0fe38 f8487e5a dfaa5400 c0086b40 [ 161.003099] dfafc000 dfaa5400 dfaa5414 dbe0fe58 f84741aa 00000000 f89c34b9 dfaa5414 [ 161.003117] dfaa5400 dfaa5400 f644b000 dbe0fe6c f89a5443 dfaa5400 f8505000 f644b000 [ 161.003134] Call Trace: [ 161.003169] [<f8487e5a>] i915_gem_context_fini+0xba/0x1c0 [i915] [ 161.003202] [<f84741aa>] i915_driver_unload+0x1fa/0x2f0 [i915] [ 161.003232] [<f89a5443>] drm_dev_unregister+0x23/0x90 [drm] [ 161.003259] [<f89a54ed>] drm_put_dev+0x3d/0x70 [drm] [ 161.003294] [<f8470615>] i915_pci_remove+0x15/0x20 [i915] [ 161.003306] [<c1338a6f>] pci_device_remove+0x2f/0xa0 [ 161.003317] [<c140c871>] __device_release_driver+0x61/0xc0 [ 161.003328] [<c140d12f>] driver_detach+0x8f/0xa0 [ 161.003341] [<c140c54f>] bus_remove_driver+0x4f/0xc0 [ 161.003353] [<c140d708>] driver_unregister+0x28/0x60 [ 161.003362] [<c10cee42>] ? stop_cpus+0x32/0x40 [ 161.003372] [<c10bd510>] ? module_refcount+0x90/0x90 [ 161.003383] [<c13378c5>] pci_unregister_driver+0x15/0x60 [ 161.003413] [<f89a739f>] drm_pci_exit+0x9f/0xb0 [drm] [ 161.003458] [<f84e624a>] i915_exit+0x1b/0x1d [i915] [ 161.003468] [<c10bf8a8>] SyS_delete_module+0x158/0x1f0 [ 161.003480] [<c1173d5d>] ? ____fput+0xd/0x10 [ 161.003488] [<c106f0fe>] ? task_work_run+0x7e/0xb0 [ 161.003499] [<c165a68d>] sysenter_do_call+0x12/0x28 [ 161.003505] Code: 0f b6 4d f3 8d 51 0f 83 e1 f0 83 e2 0f 09 d1 84 d2 88 48 54 75 07 80 a7 91 00 00 00 7f 83 c4 04 5b 5e 5f 5d c3 8d b6 00 00 00 00 <0f> 0b 8d b6 00 00 00 00 55 89 e5 57 56 53 83 ec 64 3e 8d 74 26 [ 161.003586] EIP: [<f84861f8>] i915_gem_object_ggtt_unpin+0x88/0x90 [i915] SS:ESP 0068:dbe0fe0c v2: Rename the local variable (is_default_ctx) to avoid confusion with the function is_default_ctx(). And correct Jesse's email address. Reported-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73985Signed-off-by:
Ben Widawsky <benjamin.widawsky@intel.com> [danvet: Fix up the rebase fail from my first attempt, thankfully pointed out by Ville.] Signed-off-by:
-
Rodrigo Vivi authored
This debugfs interface will allow intel-gpu-tools test case to verify if screen has been updated properly on cases like PSR. v2: Accepted all Daniel's suggestions: * grab modeset lock * loop over connector and check DPMS on * return errors * use _eDP1 suffix for easy future extension * don't cache crc_supported neither latest crc * return crc as a full array and read it at once with aux. * use 0 to turn TEST_SINK off. * split the drm_helpers definitions in another patch. v3: Accepted 2 Damien's suggestion: remove h from printf hexa and return ENODEV when eDP not present instead of EAGAIN. v4: Accepted 2 Jani' s suggestion: 1 path for unlock and remove _retry from aux read. v5: removing last missing useless _retry (by Damien) Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Damien Lespiau <damien.lespiau@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: -
Rodrigo Vivi authored
This address will be used to verify panel CRC for test and validation purposes. Signed-off-by:
Dave Airlie <airlied@gmail.com> Signed-off-by:
-
- 25 Jan, 2014 14 commits
-
-
Ville Syrjälä authored
Having a 4 byte register at 0x321b seems unlikely as that's not 4 byte aligned. Since later platforms have more or less the same FBC registers with new names, assume that FBC_FENCE_OFF is at 0x3218 just like DPFC_FENCE_YOFF. This feels like a simple typo in BSpec. 321Bh looks a lot like 3218h after all. Should still be tested on real hardware of course. But I don't have any mobile gen4 systems. Signed-off-by:
-
Ville Syrjälä authored
The debug message telling FBC1 has been enabled is missing a newline. Add it. Signed-off-by:
-
Ville Syrjälä authored
On CTG and IVB+ we don't try to preserve any bits from the DPFC_CONTROL register. Follow suit on ILK/SNB. Signed-off-by:
-
Ville Syrjälä authored
We will anyway re-enable FBC normally after resume, so trying to save and restore the register makes little sense. We do need to preserve the FBC1 interval bits in FBC_CONTROL since we only initialize them during driver load, and try to preserve them after that. v2: s/I915_HAS_FBC/HAS_FBC/ and fix the check for gen4 Signed-off-by:
-
Ville Syrjälä authored
We set up all the bits for DPFC_CONTROL but forgot to actually write them to the register. Oops. Signed-off-by:
-
Ville Syrjälä authored
Signed-off-by:
-
Ville Syrjälä authored
Make the FBC plane macros take the plane as a parameter. Signed-off-by:
-
Ville Syrjälä authored
The ILK/SNB docs don't really mention the the DPFC_HT_MODIFY bit. CTG docs clearly state that it should be set only when tracking back buffer modification in persistent mode. The bit is supposed to be set by software after the first CPU modification to the back buffer, and it would get automagically cleared by the hardware on the next page flip. Since we only track front buffer modification we don't need to set this bit. GTT modification tracking still appears to work on ILK and SNB with the bit unset. I don't have a CTG to verify how that behaves. Signed-off-by:
-
Ville Syrjälä authored
The ILK/SNB docs are a bit unclear what the persistent mode does, but the CTG docs clearly state that it was meant to be used when we're tracking back buffer modifications. We never do that, so leave it in non-persistent mode. Signed-off-by:
-
Ville Syrjälä authored
We use nuking instead of render tracking on IVB+, so there's no point in writing IVB_FBC_RT_BASE. v2: Drop the IVB_FBC_RT_BASE write too v3: Move the SNB stuff elsewhere, leaving only IVB+ here Signed-off-by:
-
Daniel Vetter authored
Because whatever.* * This should contain a fairly long list of issues and still unresolved resgressions, but I didn't really get a vote. Signed-off-by: -
Ville Syrjälä authored
I want to see these without having full debugs enabled. Signed-off-by:
-
Ville Syrjälä authored
Currently we print all pipe underruns on GMCH platforms. Hook up the same logic we use on PCH platforms where we disable the underrun reporting after the first underrun. Underruns don't actually generate interrupts themselves on GMCH platforms, we just can detect them whenever we service other interrupts. So we don't have any enable bits to worry about. We just need to remember to clear the underrun status when enabling underrun reporting. Note that the underrun handling needs to be moved to the non-locked pipe_stats[] loop in the interrupt handlers to avoid having to rework the locking in intel_set_cpu_fifo_underrun_reporting(). Signed-off-by:
-
Chris Wilson authored
This is useful for debugging as we then know that the first entry is always the global GTT, and all later entries the per-process GTT VM. Signed-off-by:
-
- 24 Jan, 2014 1 commit
-
-
Jesse Barnes authored
Forgot to convert to using the refclk variable when I added refclk readout support, and Paulo noticed the resulting calculation was off due to the way p & r are stored. Reported-by:
Paulo Zanoni <przanoni@gmail.com> Signed-off-by:
-
