- 10 Jan, 2024 7 commits
-
-
Cheng-Chieh Hsieh authored
DIG standing for dynamic initial gain that is used to adjust RX coverage, and PD lower threshold is packet detection power level by received signal strength to avoid false detection of the WiFi packet. Because of the hardware is different between WiFi 7 and 6 ICs, we adjust flow and add register definition for 8922A. Signed-off-by: Cheng-Chieh Hsieh <cj.hsieh@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240105064228.36580-5-pkshih@realtek.com
-
Chung-Hsuan Hung authored
Set values of LNA, TIA and RPL gain compensation read from firmware file when channel is changed. Signed-off-by: Chung-Hsuan Hung <hsuan8331@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240105064228.36580-4-pkshih@realtek.com
-
Chung-Hsuan Hung authored
Add RX gain offset dynamic setting flow according to different bands and bandwidths. RX gain offset values will be different according to different channel bands, therefore, this dynamic mechanism is needed while channel is changed. Add this to parse data from the element of firmware file, and then we can use them easier at runtime. Signed-off-by: Chung-Hsuan Hung <hsuan8331@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240105064228.36580-3-pkshih@realtek.com
-
Ping-Ke Shih authored
WiFi 7 chips use different bb_gain_info struct, so move existing struct to a union in advance. This doesn't change logic at all. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240105064228.36580-2-pkshih@realtek.com
-
Zong-Zhe Yang authored
Update TX power tables to RF version R37. Mainly update configurations for Canada 5.9 GHz (U-NII 4) according to IC (Industry Canada) certification. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240103014114.9558-2-pkshih@realtek.com
-
Zong-Zhe Yang authored
Update TX power tables to RF version R36. Mainly update configurations for Canada 5.9 GHz (U-NII 4) according to IC (Industry Canada) certification. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240103014114.9558-1-pkshih@realtek.com
-
Chin-Yen Lee authored
Sometimes driver can't use kernel API pci_read/write_config_byte to access the PCI config space of above address 0x100 due to the negotiated PCI setting. 8852AE/8852BE/8851BE provide another way called DBI function, which belongs to WiFi mac and could access all PCI config space for this case. Link: https://lore.kernel.org/linux-wireless/79fe81b7db7148b9a7da2353c16d70fb@realtek.com/T/#tSigned-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240103012346.6822-1-pkshih@realtek.com
-
- 08 Jan, 2024 2 commits
-
-
Jakub Kicinski authored
Revert "net/mlx5: Implement management PF Ethernet profile" This reverts commit 22c46406. Revert "net/mlx5: Enable SD feature" This reverts commit c88c49ac. Revert "net/mlx5e: Block TLS device offload on combined SD netdev" This reverts commit 83a59ce0. Revert "net/mlx5e: Support per-mdev queue counter" This reverts commit d72baceb. Revert "net/mlx5e: Support cross-vhca RSS" This reverts commit c73a3ab8. Revert "net/mlx5e: Let channels be SD-aware" This reverts commit e4f9686b. Revert "net/mlx5e: Create EN core HW resources for all secondary devices" This reverts commit c4fb94aa. Revert "net/mlx5e: Create single netdev per SD group" This reverts commit e2578b4f. Revert "net/mlx5: SD, Add informative prints in kernel log" This reverts commit c82d3603. Revert "net/mlx5: SD, Implement steering for primary and secondaries" This reverts commit 605fcce3. Revert "net/mlx5: SD, Implement devcom communication and primary election" This reverts commit a45af9a9. Revert "net/mlx5: SD, Implement basic query and instantiation" This reverts commit 63b9ce94. Revert "net/mlx5: SD, Introduce SD lib" This reverts commit 4a04a31f. Revert "net/mlx5: Fix query of sd_group field" This reverts commit e04984a3. Revert "net/mlx5e: Use the correct lag ports number when creating TISes" This reverts commit a7e7b40c. There are some unanswered questions on the list, and we don't have any docs. Given the lack of replies so far and the fact that v6.8 merge window has started - let's revert this and revisit for v6.9. Link: https://lore.kernel.org/all/20231221005721.186607-1-saeed@kernel.org/Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Revert "net: stmmac: Use interrupt mode INTM=1 for per channel irq" This reverts commit 36af9f25. Revert "net: stmmac: Add support for TX/RX channel interrupt" This reverts commit 9072e03d. Revert "net: stmmac: Make MSI interrupt routine generic" This reverts commit 477bd4be. Revert "dt-bindings: net: snps,dwmac: per channel irq" This reverts commit 67d47c8a. Device tree bindings need to be reviewed. Link: https://lore.kernel.org/all/2df9fe3e-7971-4aa2-89a9-0e085b3b00d7@linaro.org/Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 07 Jan, 2024 16 commits
-
-
Christophe JAILLET authored
ida_alloc() and ida_free() should be preferred to the deprecated ida_simple_get() and ida_simple_remove(). This is less verbose. Note that the upper bound of ida_alloc_range() is inclusive while the one of ida_simple_get() was exclusive. So calls have been updated accordingly. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christophe JAILLET authored
s/diffentiate/differentiate/ Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jamal Hadi Salim authored
Commit ba24ea12 ("net/sched: Retire ipt action") removed the ipt action but not the testcases. This patch removes the outstanding tdc tests. Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Swee Leong Ching says: ==================== net: stmmac: Enable Per DMA Channel interrupt Add Per DMA Channel interrupt feature for DWXGMAC IP. Patchset (link below) contains per DMA channel interrupt, But it was achieved. https://lore.kernel.org/lkml/20230821203328.GA2197059- robh@kernel.org/t/#m849b529a642e1bff89c05a07efc25d6a94c8bfb4 Some of the changes in this patchset are based on reviewer comment on patchset mentioned beforehand. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Swee Leong Ching authored
Enable per DMA channel interrupt that uses shared peripheral interrupt (SPI), so only per channel TX and RX intr (TI/RI) are handled by TX/RX ISR without calling common interrupt ISR. Signed-off-by: Teoh Ji Sheng <ji.sheng.teoh@intel.com> Signed-off-by: Swee Leong Ching <leong.ching.swee@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Swee Leong Ching authored
Enable TX/RX channel interrupt registration for MAC that interrupts CPU through shared peripheral interrupt (SPI). Per channel interrupts and interrupt-names are registered through, Eg: 4 tx and 4 rx channels: interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "dma_tx0", "dma_tx1", "dma_tx2", "dma_tx3", "dma_rx0", "dma_rx1", "dma_rx2", "dma_rx3"; Signed-off-by: Teoh Ji Sheng <ji.sheng.teoh@intel.com> Signed-off-by: Swee Leong Ching <leong.ching.swee@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Swee Leong Ching authored
There is no support for per DMA channel interrupt for non-MSI platform, where the MAC's per channel interrupt hooks up to interrupt controller(GIC) through shared peripheral interrupt(SPI) to handle interrupt from TX/RX transmit channel. This patch generalize the existing MSI ISR to also support non-MSI platform. Signed-off-by: Teoh Ji Sheng <ji.sheng.teoh@intel.com> Signed-off-by: Swee Leong Ching <leong.ching.swee@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Swee Leong Ching authored
Add dt-bindings for per channel irq. Signed-off-by: Rohan G Thomas <rohan.g.thomas@intel.com> Signed-off-by: Swee Leong Ching <leong.ching.swee@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Christian Marangi says: ==================== net: phy: at803x: even more generalization This is part 3 of at803x required patches to split the PHY driver in more specific PHY Family driver. While adding support for a new PHY Family qca807x it was notice lots of similarities with the qca808x cdt function. Hence this series is done to make things easier in the future when qca807x PHY will be submitted. Changes v4: - Fix Smatch warning Changes v3: - Rebase on top of net-next Changes v2: - Address request from Russell in a previous series on cdt get status improvement ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christian Marangi authored
Make read_status more generic in preparation on moving it to shared library as other PHY Family Driver will have the exact same implementation. The only specific part was a check for AR8031/33 if 1000basex was used. The check is moved to a dedicated function specific for those PHYs. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christian Marangi authored
QCA808x PHY Family supports Cable Diagnostic Test also for Cross Pair Short. Add all the define to make enable and support these additional tests. Cross Short test was previously disabled by default, this is now changed and enabled by default. In this mode, the mask changed a bit and length is shifted based on the fault condition. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christian Marangi authored
Refactor qca808x cable test get status function to remove code duplication and clean things up. The same logic is applied to each pair hence it can be generalized and moved to a common function. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christian Marangi authored
Generalize cable test fault length function since they all base on the same magic values (already reverse engineered to understand the meaning of it) to have consistenct values on every PHY. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Zhengchao Shao authored
In fib_nl2rule(), 'err' variable has been set to -EINVAL during declaration, and no need to set the 'err' variable to -EINVAL again. So, remove it. Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pedro Tammela authored
Instead of using two bools derived from a flags passed as arguments to the parent function of tc_action_load_ops, just pass the flags itself to tc_action_load_ops to simplify its parameters. Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christophe JAILLET authored
ida_alloc() and ida_free() should be preferred to the deprecated ida_simple_get() and ida_simple_remove(). This is less verbose. Note that the upper bound of ida_alloc_range() is inclusive while the one of ida_simple_get() was exclusive. So NFP_FL_LAG_GROUP_MAX has been decreased by 1. It now better watch the comment stating that "1 to 31 are valid". The only other user of NFP_FL_LAG_GROUP_MAX has been updated accordingly in nfp_fl_lag_put_unprocessed(). Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 06 Jan, 2024 5 commits
-
-
Ahmed Zaki authored
RXFH input_xfrm currently has three supported values: 0 (clear all), symmetric_xor and NO_CHANGE. Reject any other value sent from user-space. Fixes: 13e59344 ("net: ethtool: add support for symmetric-xor RSS hash") Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Link: https://lore.kernel.org/r/20240104212653.394424-1-ahmed.zaki@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Benjamin Poirier authored
The expression "source ../lib.sh" added to net/forwarding/lib.sh in commit 25ae948b ("selftests/net: add lib.sh") does not work for tests outside net/forwarding which source net/forwarding/lib.sh (1). It also does not work in some cases where only a subset of tests are exported (2). Avoid the problems mentioned above by replacing the faulty expression with a copy of the content from net/lib.sh which is used by files under net/forwarding. A more thorough solution which avoids duplicating content between net/lib.sh and net/forwarding/lib.sh has been posted here: https://lore.kernel.org/netdev/20231222135836.992841-1-bpoirier@nvidia.com/ The approach in the current patch is a stopgap solution to avoid submitting large changes at the eleventh hour of this development cycle. Example of problem 1) tools/testing/selftests/drivers/net/bonding$ ./dev_addr_lists.sh ./net_forwarding_lib.sh: line 41: ../lib.sh: No such file or directory TEST: bonding cleanup mode active-backup [ OK ] TEST: bonding cleanup mode 802.3ad [ OK ] TEST: bonding LACPDU multicast address to slave (from bond down) [ OK ] TEST: bonding LACPDU multicast address to slave (from bond up) [ OK ] An error message is printed but since the test does not use functions from net/lib.sh, the test results are not affected. Example of problem 2) tools/testing/selftests$ make install TARGETS="net/forwarding" tools/testing/selftests$ cd kselftest_install/net/forwarding/ tools/testing/selftests/kselftest_install/net/forwarding$ ./pedit_ip.sh veth{0..3} lib.sh: line 41: ../lib.sh: No such file or directory TEST: ping [ OK ] TEST: ping6 [ OK ] ./pedit_ip.sh: line 135: busywait: command not found TEST: dev veth1 ingress pedit ip src set 198.51.100.1 [FAIL] Expected to get 10 packets, but got . ./pedit_ip.sh: line 135: busywait: command not found TEST: dev veth2 egress pedit ip src set 198.51.100.1 [FAIL] Expected to get 10 packets, but got . ./pedit_ip.sh: line 135: busywait: command not found TEST: dev veth1 ingress pedit ip dst set 198.51.100.1 [FAIL] Expected to get 10 packets, but got . ./pedit_ip.sh: line 135: busywait: command not found TEST: dev veth2 egress pedit ip dst set 198.51.100.1 [FAIL] Expected to get 10 packets, but got . ./pedit_ip.sh: line 135: busywait: command not found TEST: dev veth1 ingress pedit ip6 src set 2001:db8:2::1 [FAIL] Expected to get 10 packets, but got . ./pedit_ip.sh: line 135: busywait: command not found TEST: dev veth2 egress pedit ip6 src set 2001:db8:2::1 [FAIL] Expected to get 10 packets, but got . ./pedit_ip.sh: line 135: busywait: command not found TEST: dev veth1 ingress pedit ip6 dst set 2001:db8:2::1 [FAIL] Expected to get 10 packets, but got . ./pedit_ip.sh: line 135: busywait: command not found TEST: dev veth2 egress pedit ip6 dst set 2001:db8:2::1 [FAIL] Expected to get 10 packets, but got . In this case, the test results are affected. Fixes: 25ae948b ("selftests/net: add lib.sh") Suggested-by: Ido Schimmel <idosch@nvidia.com> Suggested-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20240104141109.100672-1-bpoirier@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski authored
Daniel Borkmann says: ==================== pull-request: bpf-next 2024-01-05 We've added 40 non-merge commits during the last 2 day(s) which contain a total of 73 files changed, 1526 insertions(+), 951 deletions(-). The main changes are: 1) Fix a memory leak when streaming AF_UNIX sockets were inserted into multiple sockmap slots/maps, from John Fastabend. 2) Fix gotol in s390 BPF JIT with large offsets, from Ilya Leoshkevich. 3) Fix reattachment branch in bpf_tracing_prog_attach() and reject the request if there is no valid attach_btf, from Jiri Olsa. 4) Remove deprecated bpfilter kernel leftovers given the project is developed in user space (https://github.com/facebook/bpfilter), from Quentin Deslandes. 5) Relax tracing BPF program recursive attach rules given right now it is not possible to create tracing program call cycles, from Dmitrii Dolgov. 6) Fix excessive memory consumption for the bpf_global_percpu_ma for systems with a large number of CPUs, from Yonghong Song. 7) Small x86 BPF JIT cleanup to reuse emit_nops instead of open-coding memcpy of x86_nops, from Leon Hwang. 8) Follow-up for libbpf to support __arg_ctx global function argument tag semantics to complement the merged kernel side, from Andrii Nakryiko. 9) Introduce "volatile compare" macros for BPF selftests in order to make the latter more robust against compiler optimization, from Alexei Starovoitov. 10) Small simplification in verifier's size checking of helper accesses along with additional selftests, from Andrei Matei. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (40 commits) selftests/bpf: Test re-attachment fix for bpf_tracing_prog_attach bpf: Fix re-attachment branch in bpf_tracing_prog_attach selftests/bpf: Add test for recursive attachment of tracing progs bpf: Relax tracing prog recursive attach rules bpf, x86: Use emit_nops to replace memcpy x86_nops selftests/bpf: Test gotol with large offsets selftests/bpf: Double the size of test_loader log s390/bpf: Fix gotol with large offsets bpfilter: remove bpfilter bpf: Remove unnecessary cpu == 0 check in memalloc selftests/bpf: add __arg_ctx BTF rewrite test selftests/bpf: add arg:ctx cases to test_global_funcs tests libbpf: implement __arg_ctx fallback logic libbpf: move BTF loading step after relocation step libbpf: move exception callbacks assignment logic into relocation step libbpf: use stable map placeholder FDs libbpf: don't rely on map->fd as an indicator of map being created libbpf: use explicit map reuse flag to skip map creation steps libbpf: make uniform use of btf__fd() accessor inside libbpf selftests/bpf: Add a selftest with > 512-byte percpu allocation size ... ==================== Link: https://lore.kernel.org/r/20240105170105.21070-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Vadim Fedorenko authored
The fb.com domain is going to be deprecated. Use personal one for kernel contributions. Signed-off-by: Vadim Fedorenko <vadfed@fb.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240104172540.2379128-1-vadfed@meta.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Eric Dumazet authored
geneve updates dev->stats fields locklessly. Adopt DEV_STATS_INC() to avoid races. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240104163633.2070538-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 05 Jan, 2024 10 commits
-
-
Jakub Kicinski authored
Richard Gobert says: ==================== net: gro: reduce extension header parsing overhead This series attempts to reduce the parsing overhead of IPv6 extension headers in GRO and GSO, by removing extension header specific code and enabling the frag0 fast path. The following changes were made: - Removed some unnecessary HBH conditionals by adding HBH offload to inet6_offloads - Added a utility function to support frag0 fast path in ipv6_gro_receive - Added selftests for IPv6 packets with extension headers in GRO v2: https://lore.kernel.org/netdev/127b8199-1cd4-42d7-9b2b-875abaad93fe@gmail.com/ v1: https://lore.kernel.org/netdev/f4eff69d-3917-4c42-8c6b-d09597ac4437@gmail.com/ ==================== Link: https://lore.kernel.org/r/ac6fb684-c00e-449c-92c3-99358a927ade@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Richard Gobert authored
Currently there is no test which checks that IPv6 extension header packets successfully coalesce. This commit adds a test, which verifies two IPv6 packets with HBH extension headers do coalesce, and another test which checks that packets with different extension header data do not coalesce in GRO. I changed the receive socket filter to accept a packet with one extension header. This change exposed a bug in the fragment test -- the old BPF did not accept the fragment packet. I updated correct_num_packets in the fragment test accordingly. Signed-off-by: Richard Gobert <richardbgobert@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/69282fed-2415-47e8-b3d3-34939ec3eb56@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Richard Gobert authored
The existing code always pulls the IPv6 header and sets the transport offset initially. Then optionally again pulls any extension headers in ipv6_gso_pull_exthdrs and sets the transport offset again on return from that call. skb->data is set at the start of the first extension header before calling ipv6_gso_pull_exthdrs, and must disable the frag0 optimization because that function uses pskb_may_pull/pskb_pull instead of skb_gro_ helpers. It sets the GRO offset to the TCP header with skb_gro_pull and sets the transport header. Then returns skb->data to its position before this block. This commit introduces a new helper function - ipv6_gro_pull_exthdrs - which is used in ipv6_gro_receive to pull ipv6 ext headers instead of ipv6_gso_pull_exthdrs. Thus, there is no modification of skb->data, all operations use skb_gro_* helpers, and the frag0 fast path can be taken for IPv6 packets with ext headers. Signed-off-by: Richard Gobert <richardbgobert@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/504130f6-b56c-4dcc-882c-97942c59f5b7@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Richard Gobert authored
This commit adds net_offload to IPv6 Hop-by-Hop extension headers (as it is done for routing and dstopts) since it is supported in GSO and GRO. This allows to remove specific HBH conditionals in GSO and GRO when pulling and parsing an incoming packet. Signed-off-by: Richard Gobert <richardbgobert@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/d4f8825a-1d55-4b12-9d67-a254dbbfa6ae@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to all the CAIF sub-modules. Link: https://lore.kernel.org/r/20240104144855.1320993-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add description to net/packet/af_packet.c Acked-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20240104144119.1319055-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to all the DSA tag modules. The descriptions are copy/pasted Kconfig names, with s/^Tag/DSA tag/. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com> Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com> Acked-by: Kurt Kanzenbach <kurt@linutronix.de> Link: https://lore.kernel.org/r/20240104143759.1318137-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to all the ATM modules and drivers. Link: https://lore.kernel.org/r/20240104143737.1317945-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Jiri Pirko says: ==================== dpll: expose fractional frequency offset value to user Allow to expose pin fractional frequency offset value over new DPLL generic netlink attribute. Add an op to get the value from the driver. Implement this new op in mlx5 driver. ==================== Link: https://lore.kernel.org/r/20240103132838.1501801-1-jiri@resnulli.usSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jiri Pirko authored
Implement ffo_get() pin op filling it up to MSEED.frequency_diff value. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Acked-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Link: https://lore.kernel.org/r/20240103132838.1501801-4-jiri@resnulli.usSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-