Merge tag 'qcom-dts-fixes-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes

Qualcomm DTS fixe for 5.19

The pinctrl state was lost in the recent refactoring of the MSM8974
Devicetree, this contains a fix for this.

* tag 'qcom-dts-fixes-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  ARM: dts: qcom: msm8974: re-add missing pinctrl

Link: https://lore.kernel.org/r/20220713030627.1371156-1-bjorn.andersson@linaro.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'arm-soc/for-5.19/devicetree-arm64-fixes' of https://github.com/Broadcom/stblinux into arm/fixes

This pull request contains Broadcom ARM64-based SoCs Device Tree fixes
for 5.19, please pull the following:

- William corrects the BCM4906 DTS to have an armv8-timer Device Tree,
  necessary for booting, and fixes the BCM4908 DTS to have a proper
  'enable-method' and 'cpu-release-addr' properties for the kernel to boot
  when using u-boot

* tag 'arm-soc/for-5.19/devicetree-arm64-fixes' of https://github.com/Broadcom/stblinux:
  arm64: dts: broadcom: bcm4908: Fix cpu node for smp boot
  arm64: dts: broadcom: bcm4908: Fix timer node for BCM4906 SoC

Link: https://lore.kernel.org/r/20220712231222.97850-1-f.fainelli@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'imx-fixes-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

i.MX fixes for 5.19, round 3:

- Fix GPIO property for imx6qdl-ts7970 board.
- Fix touchscreen pinctrl for imx6ull-colibri board by moving iomuxc-snvs
  pin to the correct controller device.
- Fix SFP node of fsl-ls1028a to have a required clock property.

* tag 'imx-fixes-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: dts: colibri-imx6ull: fix snvs pinmux group
  ARM: dts: imx6qdl-ts7970: Fix ngpio typo and count
  arm64: dts: ls1028a: Update SFP node to include clock

Link: https://lore.kernel.org/r/20220709032716.GA9868@dragonSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'sunxi-fixes-for-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes

- Fix SPI NOR compatible on Orange Pi Zero

* tag 'sunxi-fixes-for-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  ARM: dts: sunxi: Fix SPI NOR campatible on Orange Pi Zero

Link: https://lore.kernel.org/r/Ysh44qUmdmF6TWS6@kista.localdomainSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'sunxi-fixes-for-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes

- fix binding for D1 display pipeline

* tag 'sunxi-fixes-for-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  dt-bindings: display: sun4i: Fix D1 pipeline count

Link: https://lore.kernel.org/r/YshiPKZRq6NHxPzO@kista.localdomainSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'at91-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes

AT91 fixes for 5.19 #2

It contains 2 DT fixes:
- one for SAMA5D2 to fix the i2s1 assigned-clock-parents property
- one for kswitch-d10 (LAN966 based) enforcing proper settings
  on GPIO pins

* tag 'at91-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  ARM: dts: at91: sama5d2: Fix typo in i2s1 node
  ARM: dts: kswitch-d10: use open drain mode for coma-mode pins

Link: https://lore.kernel.org/r/20220708151621.860339-1-claudiu.beznea@microchip.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Add spin-table enable-method and cpu-release-addr properties for
cpu0 node. This is required by all ARMv8 SoC. Otherwise some
bootloader like u-boot can not update cpu-release-addr and linux
fails to start up secondary cpus.

Fixes: 2961f69f ("arm64: dts: broadcom: add BCM4908 and Asus GT-AC5300 early DTS files")
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

The cpu mask value in interrupt property inherits from bcm4908.dtsi
which sets to four cpus. Correct the value to two cpus for dual core
BCM4906 SoC.

Fixes: c8b404fb ("arm64: dts: broadcom: bcm4908: add BCM4906 Netgear R8000P DTS files")
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

The device tree should include generic "jedec,spi-nor" compatible, and a
manufacturer-specific one.
The macronix part is what is shipped on the boards that come with a
flash chip.

Fixes: 45857ae9 ("ARM: dts: orange-pi-zero: add node for SPI NOR")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220708174529.3360-1-msuchanek@suse.de

Fix typo in i2s1 causing errors in dt binding validation.
Change assigned-parrents to assigned-clock-parents
to match i2s0 node formatting.

Fixes: 1ca81883 ("ARM: dts: at91: sama5d2: add nodes for I2S controllers")
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
[claudiu.beznea: use imperative addressing in commit description, remove
 blank line after fixes tag, fix typo in commit message]
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220707215812.193008-1-Ryan.Wanner@microchip.com

Merge tag 'tee-fixes-for-v5.19' of https://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes

Fixes for TEE subsystem

A fix for the recently merged commit ed8faf6c ("optee: add
OPTEE_SMC_CALL_WITH_RPC_ARG and OPTEE_SMC_CALL_WITH_REGD_ARG").
Two small fixes in comment, repeated words etc.

* tag 'tee-fixes-for-v5.19' of https://git.linaro.org/people/jens.wiklander/linux-tee:
  tee: tee_get_drvdata(): fix description of return value
  optee: Remove duplicate 'of' in two places.
  optee: smc_abi.c: fix wrong pointer passed to IS_ERR/PTR_ERR()

Link: https://lore.kernel.org/r/20220708134607.GA901814@jadeSigned-off-by: Arnd Bergmann <arnd@arndb.de>

This patch fixes the description of tee_get_drvdata()'s return value.
It actually returns the driver_data pointer supplied to
tee_device_alloc() since the TEE subsystem was added to the kernel.

Fixes: 967c9cca ("tee: generic TEE subsystem")
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>

file: ./drivers/tee/optee/optee_smc.h
line: 192
 * a2   Size of of SHM
chanegd to
 * a2   Size of SHM
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>

The driver use the coma-mode pins as open-drain. Flag them in the device
tree accordingly. This avoids the following error:
[   14.114180] gpio-2007 (coma-mode): enforced open drain please flag it properly in DT/ACPI DSDT/board file

Fixes: 46a9556d ("ARM: dts: kswitch-d10: enable networking")
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220704150808.1104295-1-michael@walle.cc

A pin controlled by the iomuxc-snvs pin controller must be
specified under the dtb's iomuxc-snvs node.

Move the one and only pin of that category from the iomuxc node
and set the pinctrl-0 using it accordingly.

Fixes: 2aa9d620 ("ARM: dts: imx6ull-colibri: add touchscreen device nodes")
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

In optee_smc_do_call_with_arg() there is a code path when the argument
struct for RPC is passed appended to the primary argument struct. When
the address of the RPC struct is retrieved there's an invalid check for
success. It should be 'rpc_arg' pass to IS_ERR/PTR_ERR().

Fixes: ed8faf6c ("optee: add OPTEE_SMC_CALL_WITH_RPC_ARG and OPTEE_SMC_CALL_WITH_REGD_ARG")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
[jw: added background to the problem]
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>

Reset controller fixes for v5.19

Fix the MAINTAINERS entry for the Synopsys AXS10x reset controller
driver, which still points to a nonexistent .txt file after the device
tree binding .yaml conversion.
Also, fix the devm_reset_control_bulk_get_optional_exclusive() call,
which was defective since its introduction due to a copy & paste error.

* tag 'reset-fixes-for-v5.19' of git://git.pengutronix.de/pza/linux:
  reset: Fix devm bulk optional exclusive control getter
  MAINTAINERS: rectify entry for SYNOPSYS AXS10x RESET CONTROLLER DRIVER

Link: https://lore.kernel.org/r/20220707101344.3329314-1-p.zabel@pengutronix.deSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Hardware random, PCI and clock drivers for the PolarFire SoC have been
upstreamed but are not covered by the MAINTAINERS entry, so add them.
Daire is the author of the clock & PCI drivers, so add him as a
maintainer in place of Lewis.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20220707142041.4096246-1-conor.dooley@microchip.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The email address sleep_walker@suse.com and the url http://hackndev.com/,
provided in the ARM/PALM TREO SUPPORT section, are not reachable anymore.

Make this machine support orphan, and give somebody the chance to step up.
Move the maintainer into CREDITS to keep the attribution to his work.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v5.19-rockchip-socfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes

Add a missing of_node_put in suspend code error path.

* tag 'v5.19-rockchip-socfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: rockchip: Add missing of_node_put() in rockchip_suspend_init()

Link: https://lore.kernel.org/r/7527945.6fTUFtlzNn@philSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v5.19-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes

rk3399 vdu clock-rate fix, otg port fix on Quartz64-A and ethernet
fix on Quartz64-B (actual production model)

* tag 'v5.19-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: Assign RK3399 VDU clock rate
  arm64: dts: rockchip: Fix Quartz64-A dwc3 otg port behavior
  arm64: dts: rockchip: Fix ethernet on production Quartz64-B

Link: https://lore.kernel.org/r/7723415.29KlJPOoH8@philSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Device-tree incorrectly used "ngpio" which caused the driver to
fallback to 32 ngpios.

This platform has 62 GPIO registers.

Fixes: 9ff8e9fc ("ARM: dts: TS-7970: add basic device tree")
Signed-off-by: Kris Bahnsen <kris@embeddedTS.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

The clocks property is now mandatory. Add it to avoid warning message.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Fixes: eba5bea8 ("arm64: dts: ls1028a: add efuse node")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

When adding the bindings for the D1 display engine, I missed the
condition for the number of pipelines. D1 has two mixers, so it
will have two pipeline references.

Fixes: ae5a5d26 ("dt-bindings: display: Add D1 display engine compatibles")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220702032921.22433-1-samuel@sholland.org

Merge tag 'stm32-dt-for-v5.19-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/fixes

STM32 DT fixes for v5.19, round 2

Highlights:
-----------

 -Fixes STM32MP15:
  - Add missing usbh clock and fix clk order for usbh to avoid PLL
    issue.
  - Fix SCMI version: use scmi regulator and update missing SCMI
    clocks to be able to correcly boot.

* tag 'stm32-dt-for-v5.19-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
  ARM: dts: stm32: add missing usbh clock and fix clk order on stm32mp15
  ARM: dts: stm32: delete fixed clock node on STM32MP15-SCMI
  ARM: dts: stm32: DSI should use LSE SCMI clock on DK1/ED1 STM32 board
  ARM: dts: stm32: use the correct clock source for CEC on stm32mp151
  ARM: dts: stm32: fix pwr regulators references to use scmi

Link: https://lore.kernel.org/r/1259e082-a3a4-96a5-ec9c-05dbb893a746@foss.st.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

When compiling with -Wformat, clang emits the following warnings:

drivers/soc/qcom/smem.c:847:41: warning: format specifies type 'unsigned
short' but the argument has type 'unsigned int' [-Wformat]
                        dev_err(smem->dev, "bad host %hu\n", remote_host);
                                                     ~~~     ^~~~~~~~~~~
                                                     %u
./include/linux/dev_printk.h:144:65: note: expanded from macro 'dev_err'
        dev_printk_index_wrap(_dev_err, KERN_ERR, dev, dev_fmt(fmt), ##__VA_ARGS__)
                                                               ~~~     ^~~~~~~~~~~
./include/linux/dev_printk.h:110:23: note: expanded from macro 'dev_printk_index_wrap'
                _p_func(dev, fmt, ##__VA_ARGS__);                       \
                             ~~~    ^~~~~~~~~~~
drivers/soc/qcom/smem.c:852:47: warning: format specifies type 'unsigned
short' but the argument has type 'unsigned int' [-Wformat]
                        dev_err(smem->dev, "duplicate host %hu\n", remote_host);
                                                           ~~~     ^~~~~~~~~~~
                                                           %u
./include/linux/dev_printk.h:144:65: note: expanded from macro 'dev_err'
        dev_printk_index_wrap(_dev_err, KERN_ERR, dev, dev_fmt(fmt), ##__VA_ARGS__)
                                                               ~~~     ^~~~~~~~~~~
./include/linux/dev_printk.h:110:23: note: expanded from macro 'dev_printk_index_wrap'
                _p_func(dev, fmt, ##__VA_ARGS__);                       \
                             ~~~    ^~~~~~~~~~~

The types of these arguments are unconditionally defined, so this patch
updates the format character to the correct one and change type of
remote_host to "u16" to match with other types.
Signed-off-by: Bill Wendling <morbo@google.com>
Tested-by: Justin Stitt <jstitt007@gmail.com>
Reviewed-by: Justin Stitt <jstitt007@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/378Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The USBH composed of EHCI and OHCI controllers needs the PHY clock to be
initialized first, before enabling (gating) them. The reverse is also
required when going to suspend.
So, add USBPHY clock as 1st entry in both controllers, so the USBPHY PLL
gets enabled 1st upon controller init. Upon suspend/resume, this also makes
the clock to be disabled/re-enabled in the correct order.
This fixes some IRQ storm conditions seen when going to low-power, due to
PHY PLL being disabled before all clocks are cleanly gated.

Fixes: 949a0c0d ("ARM: dts: stm32: add USB Host (USBH) support to stm32mp157c")
Fixes: db7be2cb ("ARM: dts: stm32: use usbphyc ck_usbo_48m as USBH OHCI clock on stm32mp151")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

Delete the node fixed clock managed by secure world with SCMI.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

LSE clock is provided by SCMI.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

The peripheral clock of CEC is not LSE but CEC.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

Fixes stm32mp15*-scmi DTS files introduced in [1] to also access PWR
regulators through SCMI service. This is needed since enabling secure
only access to RCC clock and reset controllers also enables secure
access only on PWR voltage regulators reg11, reg18 and usb33 hence
these must also be accessed through SCMI Voltage Domain protocol.
This change applies on commit [2] that already corrects issues from
commit [1].

Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Link: [1] https://lore.kernel.org/linux-arm-kernel/20220422150952.20587-7-alexandre.torgue@foss.st.com
Link: [2] https://lore.kernel.org/linux-arm-kernel/20220613071920.5463-1-alexandre.torgue@foss.st.comSigned-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

Merge tag 'qcom-arm64-fixes-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes

Qualcomm ARM64 DT fixes for v5.19

This removes duplicate includes in the sc7180-trogdor files, which
accidentally ended up disabling nodes intended to be enabled.

It corrects identifiers for CPU6/7 on MSM8994. On SM8450 the UFS node's
interconnects property is updated to match the #interconnect-cells,
avoiding sync_state issues and the GIC ITS is defined, to correct the
references from the PCIe nodes. On SDM845 the display subsystem's AHB
clock is corrected and on msm8992 devices, the supplies for lvs 1 and 2
are correctly specified.

Lastly, a welcome addition of Konrad as reviewer for the Qualcomm SoC.

* tag 'qcom-arm64-fixes-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  arm64: dts: qcom: msm8992-*: Fix vdd_lvs1_2-supply typo
  MAINTAINERS: Add myself as a reviewer for Qualcomm ARM/64 support
  arm64: dts: qcom: sdm845: use dispcc AHB clock for mdss node
  arm64: dts: qcom: sm8450 add ITS device tree node
  arm64: dts: qcom: msm8994: Fix CPU6/7 reg values
  arm64: dts: qcom: sm8450: fix interconnects property of UFS node
  arm64: dts: qcom: Remove duplicate sc7180-trogdor include on lazor/homestar

Link: https://lore.kernel.org/r/20220703030208.408109-1-bjorn.andersson@linaro.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'amlogic-arm-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/fixes

Amlogic ARM mach-meson changes for v5.20:
- Fix refcount leak in meson_smp_prepare_cpus

* tag 'amlogic-arm-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
  ARM: meson: Fix refcount leak in meson_smp_prepare_cpus

Link: https://lore.kernel.org/r/cbf6bcb5-c7be-40fe-4436-4578c9d6c532@baylibre.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'scmi-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes

Arm SCMI firmware driver fixes for v5.19

Few more fixes to address:
1. Issue reported on Juno with HDLCD clock which turned out to be yet
   another firmware issue. The firmware is not conformant to the spec and
   we now have to workaround as this may be copied to other platforms as
   well. The spec expects to return size of 3 for a range clock rate
   description while the firmware returns 1. We have other ways to validate
   all the 3 entries the driver reads are polpulated and we use the same
   to workaround this firmware bug.

2. Optee transport not setting the correct reponse length which is similar
   to the one reported earlier on Rockchip platform.

3. Drop the usage of the deprecated ida_simple_{get,remove} and migrate to the
   ida_{alloc,free}

* tag 'scmi-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  firmware: arm_scmi: Remove usage of the deprecated ida_simple_xxx API
  firmware: arm_scmi: Fix response size warning for OPTEE transport
  firmware: arm_scmi: Relax CLOCK_DESCRIBE_RATES out-of-spec checks

Link: https://lore.kernel.org/r/20220628133315.699803-1-sudeep.holla@arm.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'imx-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

i.MX fixes for 5.19, round 2:

- Fix the SDIO description for imx7d-smegw01 board to ensure there is
  no communication made at 1.8V.
- Fix pgc_ispdwp power-domain clock, which should be
  IMX8MP_CLK_MEDIA_ISP_ROOT.
- Re-enable framebuffer support in mxs_defconfig to fix a Kconfig
  regression.
- A series from Peng Fan (and Sherry Sun) fixing various pads on i.MX8MP
  based boards to leave reserved bits untouched.

* tag 'imx-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  arm64: dts: imx8mp-icore-mx8mp-edim2.2: correct pad settings
  arm64: dts: imx8mp-phyboard-pollux-rdk: correct i2c2 & mmc settings
  arm64: dts: imx8mp-phyboard-pollux-rdk: correct eqos pad settings
  arm64: dts: imx8mp-phyboard-pollux-rdk: correct uart pad settings
  arm64: dts: imx8mp-venice-gw74xx: correct pad settings
  arm64: dts: imx8mp-evk: correct I2C3 pad settings
  arm64: dts: imx8mp-evk: correct I2C1 pad settings
  arm64: dts: imx8mp-evk: correct I2C5 pad settings
  arm64: dts: imx8mp-evk: correct vbus pad settings
  arm64: dts: imx8mp-evk: correct eqos pad settings
  arm64: dts: imx8mp-evk: correct vbus pad settings
  arm64: dts: imx8mp-evk: correct gpio-led pad settings
  arm64: dts: imx8mp-evk: correct the uart2 pinctl value
  arm64: dts: imx8mp-evk: correct mmc pad settings
  ARM: mxs_defconfig: Enable the framebuffer
  arm64: dts: imx8mp: correct clock of pgc_ispdwp
  ARM: dts: imx7d-smegw01: Fix the SDIO description

Link: https://lore.kernel.org/r/20220629021244.GL819983@dragonSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'at91-fixes-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes

AT91 fixes for 5.19

It contains 3 SoC fixes and 2 DT fixes:
SoC:
- fix the wakeup from RTC and RTT for ULP1 mode
- fix section mismatch warning
- fix SAM9X60 SiP detection

DT:
- fixes the EEPROMs compatibles for sama5d2_icp and sam9x60ek and EEPROM
  size for sam9x60ek

* tag 'at91-fixes-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  ARM: at91: pm: Mark at91_pm_secure_init as __init
  ARM: at91: fix soc detection for SAM9X60 SiPs
  ARM: dts: at91: sama5d2_icp: fix eeprom compatibles
  ARM: dts: at91: sam9x60ek: fix eeprom compatible and size
  ARM: at91: pm: use proper compatibles for sama7g5's rtc and rtt
  ARM: at91: pm: use proper compatibles for sam9x60's rtc and rtt
  ARM: at91: pm: use proper compatible for sama5d2's rtc

Link: https://lore.kernel.org/r/20220628135130.3114878-1-claudiu.beznea@microchip.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

The kernel test robot found this inconsistency:

  drivers/soc/ixp4xx/ixp4xx-npe.c:737:34: warning:
  'ixp4xx_npe_of_match' defined but not used [-Wunused-const-variable=]
     737 | static const struct of_device_id ixp4xx_npe_of_match[] = {

This is because the match is enclosed in the of_match_ptr()
which compiles into NULL when OF is disabled and this
is unnecessary.

Fix it by dropping of_match_ptr() around the match.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220626074315.61209-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

As part of a recent cleanup commit, the pinctrl for a few uart and i2c
nodes was removed. Adjust the names and/or add it back and assign it to
the uart and i2c nodes.

Fixes: 1dfe967e ("ARM: dts: qcom-msm8974*: Consolidate I2C/UART/SDHCI")
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220606160421.1641778-1-luca@z3ntu.xyz

Most likely due to copy-paste mistake the device managed version of the
denoted reset control getter has been implemented with invalid semantic,
which can be immediately spotted by having "WARN_ON(shared && acquired)"
warning in the system log as soon as the method is called. Anyway let's
fix it by altering the boolean arguments passed to the
__devm_reset_control_bulk_get() method from
- shared = true, optional = false, acquired = true
to
+ shared = false, optional = true, acquired = true
That's what they were supposed to be in the first place (see the non-devm
version of the same method: reset_control_bulk_get_optional_exclusive()).

Fixes: 48d71395 ("reset: Add reset_control_bulk API")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20220624141853.7417-2-Sergey.Semin@baikalelectronics.ru

Commit 820f722c ("dt-bindings: reset: snps,axs10x-reset: Convert to
yaml") converts snps,axs10x-reset.txt to yaml, but misses to adjust its
reference in MAINTAINERS.

Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.

Repair this file reference in SYNOPSYS AXS10x RESET CONTROLLER DRIVER.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20220601082239.12009-1-lukas.bulwahn@gmail.com