Skip to content

L
linux
Switch branch/tag
  1. 02 Mar, 2016 11 commits
  3. 01 Mar, 2016 12 commits
  5. 29 Feb, 2016 9 commits
    • Vignesh R's avatar
      ARM: dts: DRA7: Add dt nodes for PWMSS · 5fcc6730
      Vignesh R authored 
      Add PWMSS device tree nodes for DRA7 SoC family and add documentation
for dt bindings.
Signed-off-by: default avatarVignesh R <vigneshr@ti.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
      5fcc6730
    • Vignesh R's avatar
      ARM: dts: DRA7: Add TBCLK for PWMSS · c60f9e29
      Vignesh R authored 
      tbclk is used by ehrpwm to generate PWM waveform on DRA7 SoC. Add Linux
clock to control ehrpwm tbclk.
The TRM says, tbclk is derived from SYSCLKOUT. SYSCLKOUT is nothing but
ehrpwm functional clock derived from the gateable interface and
functional clock of PWMSS(l4_root_clk_div).
Refer AM57x TRM SPRUHZ6[1], October 2014, Table 29-4 and Section 29.2.2.1,
Table 29-19 and the NOTE at the end of the table.

[1] www.ti.com/lit/ug/spruhz6/spruhz6.pdf
Signed-off-by: default avatarVignesh R <vigneshr@ti.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
      c60f9e29
    • Arnd Bergmann's avatar
      Merge tag 'pxa-dt-4.6' of https://github.com/rjarzmik/linux into next/dt · 53b28f1c
      Arnd Bergmann authored 
      Merge pxa dt for v4.6 from Robert Jarzmik:

This device-tree pxa update brings :
 - a single fix for nand dmaengine node

* tag 'pxa-dt-4.6' of https://github.com/rjarzmik/linux:
  ARM: dts: pxa: fix dma engine node to pxa3xx-nand
      53b28f1c
    • Arnd Bergmann's avatar
      Merge tag 'sunxi-dt-for-4.6' of... · 8898cb41
      Arnd Bergmann authored 
      Merge tag 'sunxi-dt-for-4.6' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt

Merge "Allwinner DT Additions for 4.6" from Maxime Ripard:

Quite a few changes, among which:
  - Support for the A83t
  - Support for the eMMC DDR on a few boards
  - Support for the OTG controller on a few boards
  - New boards: Itead Ibox, Cubietruck plus, Homlet v2, Lamobo R1

* tag 'sunxi-dt-for-4.6' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (34 commits)
  ARM: dts: sun8i: Add leds and switch on Orangepi Plus boards
  ARM: dts: sun8i: Add ir receiver nodes to H3 dtsi
  ARM: dts: sun8i-h3: Add R_PIO controller node to the dtsi
  dts: sun8i-h3: Add APB0 related clocks and resets
  ARM: dts: sun7i: Add dts file for the lamobo-r1 board
  ARM: dts: sun4i: Enable USB DRC on Hyundai-a7hd
  ARM: dts: sun4i: Enable USB DRC on the MK802
  ARM: dts: sun8i: q8-common: Add AXP223 PMIC device and regulator nodes
  ARM: dts: sun8i: sinlinx-sina33: Add AXP223 PMIC device and regulator nodes
  ARM: dts: sun7i: Enable USB DRC on Olimex A20 EVB
  ARM: dts: sun7i: Enable USB DRC on MK808C
  ARM: dts: sunxi: Fix #interrupt-cells for PIO in H3
  ARM: dts: sun8i-a83t: Correct low speed oscillator clocks
  ARM: dts: sun9i: a80-optimus: Remove i2c3 and uart4
  ARM: dts: sun4i: Itead Iteaduino to use common code
  ARM: dts: sun7i: Add Itead Ibox support
  ARM: dts: sunxi: Add sunxi-itead-core-common.dtsi
  ARM: dts: sun9i: cubieboard4: Enable hardware reset and HS-DDR for eMMC
  ARM: dts: sun9i: a80-optimus: Enable hardware reset and HS-DDR for eMMC
  ARM: dts: sun9i: Include SDC2_RST pin in mmc2_8bit_pins
  ...
      8898cb41
    • Lokesh Vutla's avatar
      ARM: dts: DRA7: change address-cells and size-cells · dae320ec
      Lokesh Vutla authored 
      DRA7 SoC has the capability to support DDR memory upto 4GB. In order to
represent this in memory dt node, the address-cells and size cells
should be 2. So, changing the address-cells and size-cells to 2 and
updating the memory nodes accordingly.
Signed-off-by: default avatarLokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
      dae320ec
    • Arnd Bergmann's avatar
      Merge tag 'mvebu-dt-4.6-2' of git://git.infradead.org/linux-mvebu into next/dt · eff01adb
      Arnd Bergmann authored 
      Merge "mvebu dt for 4.6 (part 2)" from Gregory CLEMENT:

- Reorder Ethernet node on Armada 38x SoCs
- Add device tree for buffalo linkstation ls-gl
- Use the more accurate armada-370-sata string for SATA on Armada 375
- Add NAND description to Armada 370 DB and Armada XP DB

* tag 'mvebu-dt-4.6-2' of git://git.infradead.org/linux-mvebu:
  ARM: dts: mvebu: add NAND description to Armada 370 DB and Armada XP DB
  ARM: dts: armada-375: use armada-370-sata for SATA
  ARM: dts: orion5x: add device tree for buffalo linkstation ls-gl
  ARM: dts: orion5x: split linkstation lswtgl into common and device parts
  ARM: dts: armada-38x: add reference to ETH connectors for A385-AP
  ARM: dts: armada-38x: change order of ethernet DT nodes on Armada 38x
  ARM: dts: orion5x: fix the missing mtd flash on linkstation lswtgl
  ARM: dts: kirkwood: use unique machine name for ds112
      eff01adb
    • Paul Kocialkowski's avatar
      ARM: dts: omap3-sniper: USB OTG support · 4d91e285
      Paul Kocialkowski authored 
      This adds support for USB OTG on the Optimus Black.
The HSUSB0 interface is connected to the TWL4030 USB PHY.
Signed-off-by: default avatarPaul Kocialkowski <contact@paulk.fr>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
      4d91e285
    • Paul Kocialkowski's avatar
      ARM: dts: LG Optimus Black codename sniper basic support · 999400d4
      Paul Kocialkowski authored 
      The LG Optimus Black codename sniper is a smartphone that was designed and
manufactured by LG Electronics (LGE) and released back in 2011.
It is using an OMAP3630 SoC, GP version.

This adds devicetree support for the device, with only a few basic features
supported, such as debug uart, i2c, internal emmc and external mmc.
Signed-off-by: default avatarPaul Kocialkowski <contact@paulk.fr>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
      999400d4
    • Arnd Bergmann's avatar
      Merge tag 'renesas-dt2-for-v4.6' of... · ca2942cc
      Arnd Bergmann authored 
      Merge tag 'renesas-dt2-for-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Merge "Second Round of Renesas ARM Based SoC DT Updates for v4.6" from
Simon Horman:

* Add L2 cache-controller nodes to r8a779[0134] and r8a73a4
* Add etheravb support to r8a7794
* Correct JP3 jumper description on Porter
* Enable thermal zone on  r8a779[013]
* Replace gpio-key, wakeup with wakeup-source property on r8a7794
* Use demuxer for IIC0/I2C0 on lager
* Use fallback etheravb, pci and pcie compatibility strings as appropriate

* tag 'renesas-dt2-for-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: dts: r8a7790: use fallback etheravb compatibility string
  ARM: dts: r8a7790: lager: use demuxer for IIC0/I2C0
  ARM: dts: r8a7794: add EtherAVB support
  ARM: dts: r8a7794: add EtherAVB clock
  ARM: dts: r8a7794: replace gpio-key, wakeup with wakeup-source property
  ARM: dts: r8a7794: Add L2 cache-controller node
  ARM: dts: r8a7793: Add L2 cache-controller node
  ARM: dts: r8a7791: Add L2 cache-controller node
  ARM: dts: r8a7790: Add L2 cache-controller nodes
  ARM: dts: r8a73a4: Add L2 cache-controller nodes
  ARM: dts: r8a7793: enable to use thermal-zone
  ARM: dts: r8a7791: enable to use thermal-zone
  ARM: dts: r8a7790: enable to use thermal-zone
  ARM: dts: porter: fix JP3 jumper description
  ARM: dts: r8a7794: use fallback pci compatibility string
  ARM: dts: r8a7791: use fallback pci compatibility string
  ARM: dts: r8a7790: use fallback pci compatibility string
  ARM: dts: r8a7791: use fallback pcie compatibility string
  ARM: dts: r8a7790: use fallback pcie compatibility string
      ca2942cc
  7. 28 Feb, 2016 1 commit
  9. 26 Feb, 2016 7 commits
    • Robert Jarzmik's avatar
      ARM: dts: pxa: fix dma engine node to pxa3xx-nand · 07c6b2d0
      Robert Jarzmik authored 
      Since the switch from mmp_pdma to pxa_dma driver for pxa architectures,
the pxa_dma requires 2 arguments, namely the requestor line and the
requested priority.

Fix the only left device node which was still passing only one argument,
making the pxa3xx-nand driver misbehave in a device-tree configuration,
ie. failing all data transfers.

Fixes: c943646d ("ARM: dts: pxa: add dma engine node to pxa3xx-nand")
Signed-off-by: default avatarRobert Jarzmik <robert.jarzmik@free.fr>
      07c6b2d0
    • Arnd Bergmann's avatar
      Merge tag 'arm-soc/for-4.6/devicetree' of http://github.com/Broadcom/stblinux into next/dt · 240b1c6e
      Arnd Bergmann authored 
      Merge "Broadcom devicetree changes for 4.6" from Florian Fainelli:

This pull request contains Broadcom ARM-based SoCs Device Tree changes:

- Rafal adds a Device Tree for the D-Link DIR-885L router which is based on the
  BCM47094 SoC similar to the BCM4709

- Simran adds proper audio clock Device Tree nodes to the Cygnus platforms

- Martin adds the auxiliary SPI controllers, makes the UART naming convention
  more standard, and finally adds the auxiliary UART found in the BCM2835 to the
  BCM2835 Device Tree

- Remi adds PWM clock support to the BCM2835 Device Tree

- Lubomir adds a Device Tree for the Raspberry Pi Model A

- Alexander adds Device Tree information for the Raspberry Pi USB power domain

- Dhananjay enables the GPIO-A controller for the Northstar Plus SoCs

- Jon fixes the PCIE Device Tree nodes by pulling them out of the bus-level node,
  removes duplicate CPU definitions, adds PMU nodes, SP804 timers, and SP805 watchdog
  to the Northstar Plus SoCs

* tag 'arm-soc/for-4.6/devicetree' of http://github.com/Broadcom/stblinux:
  ARM: bcm2835: add bcm2835-aux-uart support to DT
  ARM: dts: NSP: Add SP805 Support to DT
  ARM: dts: NSP: Add SP804 Support to DT
  ARM: dts: NSP: Add PMU Support to DT
  ARM: dts: NSP: Fix CPU DT issue
  ARM: dts: NSP: Fix PCIE DT issue
  ARM: dts: enable GPIO-a for Broadcom NSP
  ARM: bcm2835: Add the Raspberry Pi power domain driver to the DT.
  ARM: bcm2835: dt: Add Raspberry Pi Model A
  ARM: bcm2835: follow dt uart node-naming convention
  ARM: bcm2835: Add PWM clock support to the device tree
  ARM: bcm2835: add the auxiliary spi1 and spi2 to the device tree
  ARM: dts: Add audio clock to the existing Broadcom Cygnus clock DT
  ARM: BCM5301X: Add DT for D-Link DIR-885L
      240b1c6e
    • Antoine Tenart's avatar
      ARM: dts: alpine: add the MSIX node · ac037ee0
      Antoine Tenart authored 
      With the newly available MSIX driver for Alpine, add the corresponding
node in the Alpine device tree.
Signed-off-by: default avatarAntoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      ac037ee0
    • Arnd Bergmann's avatar
      Merge tag 'zynq-dt-for-4.6' of https://github.com/Xilinx/linux-xlnx into next/dt · b880bf09
      Arnd Bergmann authored 
      Merge "ARM: Xilinx Zynq dt patches for v4.6" from Michal Simek

- Add usb phy for Zybo
- Use earlycon instead of earlyprintk

* tag 'zynq-dt-for-4.6' of https://github.com/Xilinx/linux-xlnx:
  ARM: zynq: Use earlycon instead of earlyprintk
  ARM: dts: zynq: Enable USB and USB PHY for ZYBO
      b880bf09
    • Arnd Bergmann's avatar
      Merge tag 'keystone_dts_for_4.6_v2' of... · 8be31869
      Arnd Bergmann authored 
      Merge tag 'keystone_dts_for_4.6_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/dt

Merge "ARM: Keystone DTS for 4.6" from Santosh Shilimkar:

ARM: DTS: Add new bindings for K2G and the K2G evm

K2G SoC family is the newest version of the Keystone family of processors.

The technical reference manual for K2G can be found here:
http://www.ti.com/lit/ug/spruhy8/spruhy8.pdf

* tag 'keystone_dts_for_4.6_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
  ARM: dts: keystone: Add minimum support for K2G evm
  ARM: dts: keystone: Add Initial DT support for TI K2G SoC family
  ARM: keystone: Create new binding for K2G SoC
      8be31869
    • Arnd Bergmann's avatar
      Merge tag 'omap-for-v4.6/dt-pt1' of... · 0314df77
      Arnd Bergmann authored 
      Merge tag 'omap-for-v4.6/dt-pt1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Device tree changes for omaps for v4.6 merge window. Mostly just
adding board specific devices and few new boards:

- N900 improvments for adp1653 and gpio keys

- Add missing bandgap data for omap3

- Add more devices for compulab cm-t335

- Add n950 WLAN support, enable modem, add pinctrl for SSI

- Correct dm814x and dra62x auxclk rate, add support for GPMC and NAND

- Add syscon node for PHY's on dra7

- Add support more devices on logicpd torpedo

- Add USB host support for igep and specify boot console

- Fix audio clock for am335x-sl50 and specify boot console

- Remove deprecated tx-fifo-resize for dwc3 that was only used on
  omap5 es1.0

- Add dra7 thermal data

- Update am43x-epos-evm compatible string to am438

- Add support for logicpd dm3730 som-lv

* tag 'omap-for-v4.6/dt-pt1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (38 commits)
  ARM: dts: am57xx-beagle-x15: Add eeprom information
  ARM: dts: Add HSUSB2 EHCI Support to Logic PD DM37xx SOM-LV
  ARM: dts: n900: Use linux input defines instead hardcoded constants
  ARM: DTS: Add minimal Support for Logic PD DM3730 SOM-LV
  ARM: dts: omap3logic: Add PWM-Backlight
  ARM: dts: omap3-n900: Allow gpio keys to be disabled
  ARM: dts: am43x-epos-evm: Add the am438 compatible string
  ARM: dts: DRA7: Add missing IVA and DSPEVE thermal domain data
  ARM: dts: DRA7: Add IVA thermal data
  ARM: dts: DRA7: Add DSPEVE thermal data
  ARM: dts: remove deprecated property dwc3
  ARM: dts: OMAP3-N950-N9: Add ssi idle pinctrl state
  ARM: dts: am335x-sl50: Fix audio codec setup.
  ARM: dts: am335x-sl50: Specify the device to be used for boot console output.
  ARM: dts: omap3-igep0030-common: Add USB Host support
  ARM: dts: igep00x0: Specify the device to be used for boot console output.
  ARM: dts: LogicPD Torpedo: Set HSUSB0 Pin Mux
  ARM: dts: OMAP3-N950-N9: Enable modem
  ARM: dts: OMAP3-N950-N9: Enable SSI module
  ARM: dts: LogicPD Torpedo: Add SPI EEPROM
  ...
      0314df77
    • Arnd Bergmann's avatar
      Merge tag 'v4.5-next-dts' of https://github.com/mbgg/linux-mediatek into next/dt · 1df1e5bf
      Arnd Bergmann authored 
      Merge "ARM: mediatek: dts updates for v4.6" from Matthias Brugger:

Add support for mt7623 SoC.
Enable SMP support for mt7623.
Enable SMP support for mt2701
Add pinctrl for mt2701

* tag 'v4.5-next-dts' of https://github.com/mbgg/linux-mediatek:
  arm: dts: Add pinctrl/GPIO/EINT node for mt2701
  ARM: dts: mt2701: enable basic SMP bringup for mt2701
  ARM: dts: mt7623: enable SMP bringup
  ARM: dts: mediatek: add MT7623 basic support
  Document: DT: Add bindings for mediatek MT7623 SoC Platform
      1df1e5bf
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7