- 20 May, 2016 4 commits
-
-
Daniel Vetter authored
I just wanted to get rid of the rmw cycle for gen9, but this also fixes some bugs we haven't carried over, like using recommended precharge and timeout values. Also I noticed that we don't set the fastwake sync length on skl, and that's used by PSR2 selective updates. Fix that. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Sonika Jindal <sonika.jindal@intel.com> Cc: Durgadoss R <durgadoss.r@intel.com> Cc: "Pandiyan, Dhinakaran" <dhinakaran.pandiyan@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by:
Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463590036-17824-6-git-send-email-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
On bdw/hsw we have a separate psr dp aux registers to set up, but on bdw it's shared with the main dp aux thing. Which means any subsequent dp aux transaction will trample over it, and hence must be done beforehand. Also this means we can't do any dp aux transactions while PSR is active, or at least we must restore the old state. Probably need a psr disable/enable pair around dp aux transactions in general. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Sonika Jindal <sonika.jindal@intel.com> Cc: Durgadoss R <durgadoss.r@intel.com> Cc: "Pandiyan, Dhinakaran" <dhinakaran.pandiyan@intel.com> Reviewed-by:
-
Daniel Vetter authored
This reverts commit dfaf37ba Author: Rodrigo Vivi <rodrigo.vivi@intel.com> Date: Mon Dec 7 14:45:20 2015 -0800 drm/i915: Fix idle_frames counter. and commit 97173eaf Author: Rodrigo Vivi <rodrigo.vivi@intel.com> Date: Tue Jul 7 16:28:55 2015 -0700 drm/i915: PSR: Increase idle_frames and implements commit d44b4dcb Author: Rodrigo Vivi <rodrigo.vivi@intel.com> Date: Fri Nov 14 08:52:31 2014 -0800 drm/i915: HSW/BDW PSR Set idle_frames = VBT + 1 without the hack to use 2 idle frames when VBT says 1. We keep the + 1 just for safety, although I haven't really figured out why that one exists. It's nonsense. idle_frames = number of frames where the screen is entirely idle before we think about entering PSR. idle_patter = part of link training, and we probably totally butchered link training because we told the hw to entirely skip it. No wonder PSR occasionally just fell over. I suspect the reason we've increased idle frames is that it makes PSR entry slightly less likely, and more likely to happen in a quite system, which probably increased the changes the panel came back up without link training. The proper fix is to implement link training for PSR. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Sonika Jindal <sonika.jindal@intel.com> Cc: Durgadoss R <durgadoss.r@intel.com> Cc: "Pandiyan, Dhinakaran" <dhinakaran.pandiyan@intel.com> Reviewed-by:
-
Daniel Vetter authored
The default of 0 is 500us of link training, but that's not enough for some platforms. Decoding this correctly means we're using 2.5ms of link training on these platforms, which fixes flickering issues associated with enabling PSR. v2: Unbotch the math a bit. v3: Drop debug hunk. v4: Improve commit message. Tested-by:
Lyude <cpaul@redhat.com> Cc: Lyude <cpaul@redhat.com> Cc: stable@vger.kernel.org Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95176 Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Sonika Jindal <sonika.jindal@intel.com> Cc: Durgadoss R <durgadoss.r@intel.com> Cc: "Pandiyan, Dhinakaran" <dhinakaran.pandiyan@intel.com> Tested-by:
-
- 19 May, 2016 22 commits
-
-
Chris Wilson authored
userptr directly only uses drm_device in a single interface where it meant to use drm_i915_private (everywhere else we have to derive it from the drm_i915_gem_object and so require going from drm_device). Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463671036-3235-1-git-send-email-chris@chris-wilson.co.uk
-
-
Maarten Lankhorst authored
If planes are added to the state after the call to drm_atomic_helper_check_planes planes_changed may not be set and we will not unpin the old framebuffer. This results in a pin leak long after the framebuffer is destroyed, so to find this add some checks when it happens. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463490484-19540-21-git-send-email-maarten.lankhorst@linux.intel.comReviewed-by:
Patrik Jakobsson <patrik.jakobsson@linux.intel.com>
-
Maarten Lankhorst authored
This reapplies commit acf4e84d. With async unpin this should no longer break. Signed-off-by:
-
Maarten Lankhorst authored
All of intel_post_plane_update is handled there now, so move it over. This is run after the hw state checker because it can't handle checking crtc's separately yet. Signed-off-by:
-
Maarten Lankhorst authored
intel_unpin_work may not take the list lock because it requires the connector_mutex. To prevent taking locks we add an array of old and new state. The old state to free, the new state to commit and verify. Signed-off-by:
-
Maarten Lankhorst authored
This is required to let fbc updates run async. It has a lot of checks whether certain locks are taken, which can be removed when the relevant states are passed in as pointers. Signed-off-by:
-
Maarten Lankhorst authored
With the removal of cs-based flips all mmio waits will finish without requiring the reset counter, because the waits will complete during gpu reset. Signed-off-by:
-
Maarten Lankhorst authored
With the removal of cs support this is no longer reachable. Can be revived if needed. Signed-off-by:
-
Maarten Lankhorst authored
With the removal of cs flips this is always force enabled. Signed-off-by:
-
Maarten Lankhorst authored
With mmio flips now available on all platforms it's time to remove support for cs flips. Signed-off-by:
-
Maarten Lankhorst authored
Create a work structure that will be used for all changes. This will be used later on in the atomic commit function. Changes since v1: - Free old_crtc_state from unpin_work_fn properly. Changes since v2: - Add hunk for calling hw state verifier. - Add missing support for color spaces. Signed-off-by:
-
Maarten Lankhorst authored
Set plane_state->base.fence to the dma_buf exclusive fence, and add a wait to the mmio function. This will make it easier to unify plane updates later on. Signed-off-by:
-
Maarten Lankhorst authored
This will be required to allow more than 1 update in the future. Signed-off-by:
-
Maarten Lankhorst authored
With intel_pipe_update begin/end we ensure that the mmio updates don't run during vblank interrupt, using the hw counter we can be sure that when current vblank count != vblank count at the time of pipe_update_end the mmio update is complete. This allows us to use mmio updates on all platforms, using the update_plane call. With Chris Wilson's patch to skip waiting for vblanks for legacy_cursor_update this potentially leaves a small race condition, in which update_plane can be called with a freed crtc_state. Because of this commit acf4e84d ("drm/i915: Avoid stalling on pending flips for legacy cursor updates") is temporarily reverted. Changes since v1: - Split out the flip_work rename. Signed-off-by:
-
Maarten Lankhorst authored
This reverts commit acf4e84d. Unfortunately this breaks the next commit with a use-after-free, so temporarily revert until we can apply a solution. Signed-off-by:
-
Maarten Lankhorst authored
Rename intel_unpin_work to intel_flip_work and use it for mmio flips and unpinning. Use flip_queued_req to hold the wait request in the mmio case, and the vblank counter from intel_crtc_get_vblank_counter. MMIO flips get their own path through intel_finish_page_flip_mmio, handled on vblank. CS page flips go through *_cs. Changes since v1: - Clean up destinction between MMIO and CS flips. Signed-off-by:
-
Maarten Lankhorst authored
This uses the newly created drm_accurate_vblank_count_and_time to accurately get a vblank count when the hw counter is unavailable. Signed-off-by:
-
Maarten Lankhorst authored
Instead of calling prepare_flip right before calling finish_page_flip do everything from prepare_page_flip in finish_page_flip. Putting prepare and finish page_flip in a single step removes the need for INTEL_FLIP_COMPLETE, so it can be removed. This simplifies the code slightly. Changes since v1: - Invert if case to simplify code. - Add missing barrier. - Reword commit message. Changes since v2: - intel_page_flip_plane is removed. - work->pending is turned into a bool. Signed-off-by:
-
Maarten Lankhorst authored
This function is duplicated with intel_finish_page_flip, and is only ever used from planes that could use the other function anyway. Signed-off-by:
-
Maarten Lankhorst authored
Both intel_unpin_work.pending and intel_unpin_work.enable_stall_check were used to see if work should be enabled. By only using pending some special cases are gone, and access to unpin_work can be simplified. A flip could previously be queued before stallcheck was active. With the addition of the pending member enable_stall_check became obsolete and can thus be removed. Use this to only access work members untilintel_mark_page_flip_active is called, or intel_queue_mmio_flip is used. This will prevent use-after-free, and makes it easier to verify accesses. Changes since v1: - Reword commit message. - Do not access unpin_work after intel_mark_page_flip_active. - Add the right memory barriers. Changes since v2: - atomic_read() needs a full smp_rmb. Signed-off-by:
-
Maarten Lankhorst authored
This function is useful for gen2 intel devices which have no frame counter, but need a way to determine the current vblank count without racing with the vblank interrupt handler. intel_pipe_update_start checks if no vblank interrupt will occur during vblank evasion, but cannot check whether the vblank handler has run to completion. This function uses the timestamps to determine when the last vblank has happened, and interpolates from there. Changes since v1: - Take vblank_time_lock and don't use drm_vblank_count_and_time. Changes since v2: - Don't return time of last vblank. Changes since v3: - Change pipe to unsigned int. (Ville) - Remove unused documentation for tv_ret. (kbuild) Changes since v4: - Add warning to docs when the function is useful. - Add a WARN_ON when get_vblank_timestamp is unavailable. - Use drm_vblank_count. Cc: Mario Kleiner <mario.kleiner.de@gmail.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Mario Kleiner <mario.kleiner.de@gmail.com>
-
- 18 May, 2016 1 commit
-
-
Peter Antoine authored
This patch resizes the GuC WOPCM (specifically on BXT) so that the GuC and RC6 memory spaces do not overlap. v2: Made calculation of WOPCM size into a separate function, so that it's consistent between the firmware size-check and the register-programming operations [Dave Gordon]. Issue: https://jira01.devtools.intel.com/browse/VIZ-6638Signed-off-by:Peter Antoine <peter.antoine@intel.com> Signed-off-by:
Dave Gordon <david.s.gordon@intel.com> Reviewed-by:
Nick Hoath <nicholas.hoath@intel.com> Tested-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463494365-26330-1-git-send-email-david.s.gordon@intel.com
-
- 17 May, 2016 4 commits
-
-
Daniel Vetter authored
- Unconditionally add plane states. Core helpers would have done this in drm_atomic_helper_check_modeset, doing it once more won't cause harm and is less fragile. - Simplify the continue logic when disabling a pipe. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by:
-
Deepak M authored
In CABC (Content Adaptive Brightness Control) content grey level scale can be increased while simultaneously decreasing brightness of the backlight to achieve same perceived brightness. The CABC is not standardized and panel vendors are free to follow their implementation. The CABC implementaion here assumes that the panels use standard SW register for control. CABC is supported only when the PWM source for backlight is from the panel. v2 by Jani: rebase, renames, check cabc support earlier, etc. Signed-off-by:
Deepak M <m.deepak@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/883faade74d2e598b143221ccc7df6daf4393a13.1461676337.git.jani.nikula@intel.com
-
Jani Nikula authored
If the source of the backlight PWM is from the panel then the PWM can be controlled by DCS command, this patch adds the support to enable/disbale panel PWM, control backlight level etc... v2: Moving the CABC bkl functions to new file.(Jani) v3: Rebase v4: Rebase v5: Use mipi_dsi_dcs_write() instead of mipi_dsi_dcs_write_buffer() (Jani) Move DCS macro`s to include/video/mipi_display.h (Jani) v6: Rename the file to intel_dsi_panel_pwm.c Removing the CABC operations v7 by Jani: renames, rebases, etc. v8 by Jani: s/INTEL_BACKLIGHT_CABC/INTEL_BACKLIGHT_DSI_DCS/ v9 by Jani: rename init function to intel_dsi_dcs_init_backlight_funcs Cc: Jani Nikula <jani.nikula@intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Yetunde Adebisi <yetundex.adebisi@intel.com> Signed-off-by:Yetunde Adebisi <yetundex.adebisi@intel.com> Signed-off-by:
-
Daniel Vetter authored
Backmerge request by Jani to get at commit 249c4f53 Author: Deepak M <m.deepak@intel.com> Date: Wed Mar 30 17:03:39 2016 +0300 drm: Add new DCS commands in the enum list Some simple conflicts in intel_dp.c. Signed-off-by:
-
- 16 May, 2016 3 commits
-
-
git://anongit.freedesktop.org/drm-intelDave Airlie authored
I kinda hoped that I could still sneak in Noralf's drm_simple_display_pipe, since there's intereset by others now (for tilcdc at least). But it wasn't ready by a hair. Oh well. Otherwise random stuff plus prep patches from Noralf. * tag 'topic/drm-misc-2016-05-13' of git://anongit.freedesktop.org/drm-intel: drm/atomic: Add drm_atomic_helper_best_encoder() drm/atomic: Don't skip drm_bridge_*() calls if !drm_encoder_helper_funcs drm/fb-cma-helper: Hook up to DocBook and fix some docs drm/fb-helper: Remove mention of CONFIG_FB_DEFERRED_IO in docs drm/sti: include linux/seq_file.h where needed drm/tegra: Use lockless gem BO free callback drm/exynos: Use lockless gem BO free callback drm: Make drm_encoder_helper_funcs optional
-
Dave Airlie authored
Merge branch 'topic-arcpgu-updates' of https://github.com/foss-for-synopsys-dwc-arc-processors/linux into drm-next Please pull this mini-series that allows ARC PGU to use dedicated memory location as framebuffer backing storage. * 'topic-arcpgu-updates' of https://github.com/foss-for-synopsys-dwc-arc-processors/linux: ARC: [axs10x] Specify reserved memory for frame buffer drm/arcpgu: use dedicated memory area for frame buffer
-
Jani Nikula authored
Also make the code more readable. Reviewed-by:
-
- 14 May, 2016 4 commits
-
-
Chris Wilson authored
Under full-ppgtt, access to the global GTT is carefully regulated through hardware functions (i.e. userspace cannot read and write to arbitrary locations in the GGTT via the GPU). With this restriction in place, we can forgo clearing stale entries from the GGTT as they will not be accessed. For aliasing-ppgtt, we could almost do the same except that we do allow userspace access to the global-GTT via execbuf in order to workraound some quirks of certain instructions. (This execbuf path is filtered out with EINVAL on full-ppgtt.) The most dramatic effect this will have will be during resume, as with full-ppgtt the GGTT is only used sparingly. References: https://bugs.freedesktop.org/show_bug.cgi?id=94722Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Tested-by:
David Weinehall <david.weinehall@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463207195-22076-4-git-send-email-chris@chris-wilson.co.uk
-
Chris Wilson authored
Now that we mark the object domains for having been restored from the hibernation image, we not need to flush everything during resume and can instead rely on the normal domain tracking to flush only when required. The only caveat here are objects that are pinned for use by the hardware, whose contents must be coherent for when the device resumes reading from then (shortly afterwards with the driver assuming the objects are in the correct domain). References: https://bugs.freedesktop.org/show_bug.cgi?id=94722Signed-off-by:
-
Chris Wilson authored
When creating the hibernation image, the CPU will read the pages of all objects and thus conflict with our domain tracking. We need to update our domain tracking to accurately reflect the state on restoration. v2: Perform the domain tracking inside freeze, before the image is written, rather than upon restoration. Signed-off-by:
Imre Deak <imre.deak@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463207195-22076-2-git-send-email-chris@chris-wilson.co.uk
-
Chris Wilson authored
Currently for handling the extra hibernation phases we just call the equivalent suspend/resume phases. In the next couple of patches, I wish to specialise the hibernation phases to reduce the amount of work required for handling GEM objects. v2: There are more! Don't forget the freeze phases. Signed-off-by:
-
- 13 May, 2016 2 commits
-
-
Ville Syrjälä authored
When we resume the watermark register may contain some BIOS leftovers, or just the hardware reset values. We should ignore those as the pipes will be off anyway, and so frobbing around with intermediate watermarks doesn't make much sense. In fact I think we should just throw the skip_intermediate_wm flag out, and instead properly sanitize the "active" watermarks to match the current plane and pipe states. The actual wm state readout might also need a bit of work. But for now, let's continue with the skip_intermediate_wm to keep the fix more minimal. Fixes this sort of errors on resume [drm:ilk_validate_pipe_wm] LP0 watermark invalid [drm:intel_crtc_atomic_check] No valid intermediate pipe watermarks are possible [drm:intel_display_resume [i915]] *ERROR* Restoring old state failed with -22 and a boatload of subsequent modeset BAT fails on my ILK. v2: - Rebase; the SKL atomic WM patches that just landed changed the WM structure fields in intel_crtc_state slightly. (Matt) Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: ed4a6a7c ("drm/i915: Add two-stage ILK-style watermark programming (v11)") Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
Ville Syrjälä authored
When we read out the watermark state from the hardware we're supposed to transfer that into the active watermarks, but currently we fail to any part of the active watermarks that isn't explicitly written. Let's clear it all upfront. Looks like this has been like this since the beginning, when I added the readout. No idea why I didn't clear it up. Cc: Matt Roper <matthew.d.roper@intel.com> Fixes: 243e6a44 ("drm/i915: Init HSW watermark tracking in intel_modeset_setup_hw_state()") Signed-off-by:
-
