- 06 Jun, 2015 28 commits
-
-
Alban Bedel authored
commit 8e71c04f upstream. In SPI mode the transfer buffer is locked with a mutex. However this mutex is only initilized after the probe, but some transfer needs to be done in the probe. To fix this bug we move the mutex initialization at the beginning of the device probe. Signed-off-by:
Alban Bedel <alban.bedel@avionic-design.de> Acked-by:
Denis Ciocca <denis.ciocca@st.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jacob Pan authored
commit d0716b0e upstream. Commit 65de7654 ("iio: iio: Fix iio_channel_read return if channel havn't info") added a check for valid info masks. This patch adds missing channel info masks for all ADC channels. Otherwise, iio_read_channel_raw() would return -EINVAL when called by consumer drivers. Note that the change of _processed to _raw actually fixes an ABI abuse in the original driver where it was used to avoid some special handling rather than because it was correct. Signed-off-by:
Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by:
-
Chris Lesiak authored
commit adba6575 upstream. When configured via device tree, the associated iio device needs to be measuring voltage for the conversion to resistance to be correct. Return -EINVAL if that is not the case. Signed-off-by:
Chris Lesiak <chris.lesiak@licor.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
David Vrabel authored
commit 77bb3dfd upstream. A non-percpu VIRQ (e.g., VIRQ_CONSOLE) may be freed on a different VCPU than it is bound to. This can result in a race between handle_percpu_irq() and removing the action in __free_irq() because handle_percpu_irq() does not take desc->lock. The interrupt handler sees a NULL action and oopses. Only use the percpu chip/handler for per-CPU VIRQs (like VIRQ_TIMER). # cat /proc/interrupts | grep virq 40: 87246 0 xen-percpu-virq timer0 44: 0 0 xen-percpu-virq debug0 47: 0 20995 xen-percpu-virq timer1 51: 0 0 xen-percpu-virq debug1 69: 0 0 xen-dyn-virq xen-pcpu 74: 0 0 xen-dyn-virq mce 75: 29 0 xen-dyn-virq hvc_console Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
-
Filipe Manana authored
commit a9629596 upstream. If while setting a block group read-only we end up allocating a system chunk, through check_system_chunk(), we were not doing it while holding the chunk mutex which is a problem if a concurrent chunk allocation is happening, through do_chunk_alloc(), as it means both block groups can end up using the same logical addresses and physical regions in the device(s). So make sure we hold the chunk mutex. Fixes: 2f081088 ("btrfs: delete chunk allocation attemp when setting block group ro") Signed-off-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
Chris Mason <clm@fb.com> Signed-off-by:
-
Ilya Dryomov authored
commit 521a04d0 upstream. This reverts commit ba9d114e. .. which introduced a regression that prevented all lingering requests requeued in kick_requests() from ever being sent to the OSDs, resulting in a lot of missed notifies. In retrospect it's pretty obvious that r_req_lru_item item in the case of lingering requests can be used not only for notarget, but also for unsent linkage due to how tightly actual map and enqueue operations are coupled in __map_request(). The assertion that was being silenced is taken care of in the previous ("libceph: request a new osdmap if lingering request maps to no osd") commit: by always kicking homeless lingering requests we ensure that none of them ends up on the notarget list outside of the critical section guarded by request_mutex. Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Reviewed-by:
Sage Weil <sage@redhat.com> Signed-off-by:
-
Ilya Dryomov authored
commit b0494532 upstream. This commit does two things. First, if there are any homeless lingering requests, we now request a new osdmap even if the osdmap that is being processed brought no changes, i.e. if a given lingering request turned homeless in one of the previous epochs and remained homeless in the current epoch. Not doing so leaves us with a stale osdmap and as a result we may miss our window for reestablishing the watch and lose notifies. MON=1 OSD=1: # cat linger-needmap.sh #!/bin/bash rbd create --size 1 test DEV=$(rbd map test) ceph osd out 0 rbd map dne/dne # obtain a new osdmap as a side effect (!) sleep 1 ceph osd in 0 rbd resize --size 2 test # rbd info test | grep size -> 2M # blockdev --getsize $DEV -> 1M N.B.: Not obtaining a new osdmap in between "osd out" and "osd in" above is enough to make it miss that resize notify, but that is a bug^Wlimitation of ceph watch/notify v1. Second, homeless lingering requests are now kicked just like those lingering requests whose mapping has changed. This is mainly to recognize that a homeless lingering request makes no sense and to preserve the invariant that a registered lingering request is not sitting on any of r_req_lru_item lists. This spares us a WARN_ON, which commit ba9d114e ("libceph: clear r_req_lru_item in __unregister_linger_request()") tried to fix the _wrong_ way. Signed-off-by:
-
Johan Hovold authored
commit e0c21530 upstream. Fix broken probe of da9052 regulators, which since commit b3f6c73d ("mfd: da9052-core: Fix platform-device id collision") use a non-deterministic platform-device id to retrieve static regulator information. Fortunately, adequate error handling was in place so probe would simply fail with an error message. Update the mfd-cell ids to be zero-based and use those to identify the cells when probing the regulator devices. Fixes: b3f6c73d ("mfd: da9052-core: Fix platform-device id collision") Signed-off-by:
Johan Hovold <johan@kernel.org> Acked-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Miklos Szeredi authored
commit cc6f67bc upstream. OpenWRT folks reported that overlayfs fails to mount if upper fs is full, because workdir can't be created. Wordir creation can fail for various other reasons too. There's no reason that the mount itself should fail, overlayfs can work fine without a workdir, as long as the overlay isn't modified. So mount it read-only and don't allow remounting read-write. Add a couple of WARN_ON()s for the impossible case of workdir being used despite being read-only. Reported-by:
Bastian Bittorf <bittorf@bluebottle.com> Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> Signed-off-by:
-
Miklos Szeredi authored
commit d377c5eb upstream. When removing an opaque directory we can't just call rmdir() to check for emptiness, because the directory will need to be replaced with a whiteout. The replacement is done with RENAME_EXCHANGE, which doesn't check emptiness. Solution is just to check emptiness by reading the directory. In the future we could add a new rename flag to check for emptiness even for RENAME_EXCHANGE to optimize this case. Reported-by:
Vincent Batts <vbatts@gmail.com> Signed-off-by:
Jordi Pujol Palomer <jordipujolp@gmail.com> Fixes: 263b4a0f ("ovl: dont replace opaque dir") Signed-off-by:
-
Rusty Russell authored
commit 83a35114 upstream. This bug has been there since day 1; addresses in the top guest physical page weren't considered valid. You could map that page (the check in check_gpte() is correct), but if a guest tried to put a pagetable there we'd check that address manually when walking it, and kill the guest. Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Dave Chinner authored
commit cddc1162 upstream. It was missed when we converted everything in XFs to use negative error numbers, so fix it now. Bug introduced in 3.17 by commit 2451337d ("xfs: global error sign conversion"), and should go back to stable kernels. Thanks to Brian Foster for noticing it. Signed-off-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Brian Foster <bfoster@redhat.com> Signed-off-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
-
Dave Chinner authored
commit 6dfe5a04 upstream. xfs_attr_inactive() is supposed to clean up the attribute fork when the inode is being freed. While it removes attribute fork extents, it completely ignores attributes in local format, which means that there can still be active attributes on the inode after xfs_attr_inactive() has run. This leads to problems with concurrent inode writeback - the in-core inode attribute fork is removed without locking on the assumption that nothing will be attempting to access the attribute fork after a call to xfs_attr_inactive() because it isn't supposed to exist on disk any more. To fix this, make xfs_attr_inactive() completely remove all traces of the attribute fork from the inode, regardless of it's state. Further, also remove the in-core attribute fork structure safely so that there is nothing further that needs to be done by callers to clean up the attribute fork. This means we can remove the in-core and on-disk attribute forks atomically. Also, on error simply remove the in-memory attribute fork. There's nothing that can be done with it once we have failed to remove the on-disk attribute fork, so we may as well just blow it away here anyway. Reported-by:
Waiman Long <waiman.long@hp.com> Signed-off-by:
-
Bob Copeland authored
commit c0345ee5 upstream. The count variable is used to iterate down to (below) zero from the size of the bitmap and handle the one-filling the remainder of the last partial bitmap block. The loop conditional expects count to be signed in order to detect when the final block is processed, after which count goes negative. Unfortunately, a recent change made this unsigned along with some other related fields. The result of is this is that during mount, omfs_get_imap will overrun the bitmap array and corrupt memory unless number of blocks happens to be a multiple of 8 * blocksize. Fix by changing count back to signed: it is guaranteed to fit in an s32 without overflow due to an enforced limit on the number of blocks in the filesystem. Signed-off-by:
Bob Copeland <me@bobcopeland.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Sasha Levin authored
commit dcbff39d upstream. match_token() expects a NULL terminator at the end of the token list so that it would know where to stop. Not having one causes it to overrun to invalid memory. In practice, passing a mount option that omfs didn't recognize would sometimes panic the system. Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
-
John Stultz authored
commit f7bcb70e upstream. It was noted that the 32bit implementation of ktime_divns() was doing unsigned division and didn't properly handle negative values. And when a ktime helper was changed to utilize ktime_divns, it caused a regression on some IR blasters. See the following bugzilla for details: https://bugzilla.redhat.com/show_bug.cgi?id=1200353 This patch fixes the problem in ktime_divns by checking and preserving the sign bit, and then reapplying it if appropriate after the division, it also changes the return type to a s64 to make it more obvious this is expected. Nicolas also pointed out that negative dividers would cause infinite loops on 32bit systems, negative dividers is unlikely for users of this function, but out of caution this patch adds checks for negative dividers for both 32-bit (BUG_ON) and 64-bit(WARN_ON) versions to make sure no such use cases creep in. [ tglx: Hand an u64 to do_div() to avoid the compiler warning ] Fixes: 166afb64 'ktime: Sanitize ktime_to_us/ms conversion' Reported-and-tested-by:
Trevor Cordes <trevor@tecnopolis.ca> Signed-off-by:
John Stultz <john.stultz@linaro.org> Acked-by:
Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Josh Boyer <jwboyer@redhat.com> Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk> Link: http://lkml.kernel.org/r/1431118043-23452-1-git-send-email-john.stultz@linaro.orgSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Liang Li authored
commit c447e76b upstream. The MPX feature requires eager KVM FPU restore support. We have verified that MPX cannot work correctly with the current lazy KVM FPU restore mechanism. Eager KVM FPU restore should be enabled if the MPX feature is exposed to VM. Signed-off-by:
Yang Zhang <yang.z.zhang@intel.com> Signed-off-by:
Liang Li <liang.z.li@intel.com> [Also activate the FPU on AMD processors. - Paolo] Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Xiao Guangrong authored
commit 0be0226f upstream. KVM may turn a user page to a kernel page when kernel writes a readonly user page if CR0.WP = 1. This shadow page entry will be reused after SMAP is enabled so that kernel is allowed to access this user page Fix it by setting SMAP && !CR0.WP into shadow page's role and reset mmu once CR4.SMAP is updated Signed-off-by:
Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by:
-
Andrea Arcangeli authored
commit e8fd5e9e upstream. memslot->userfault_addr is set by the kernel with a mmap executed from the kernel but the userland can still munmap it and lead to the below oops after memslot->userfault_addr points to a host virtual address that has no vma or mapping. [ 327.538306] BUG: unable to handle kernel paging request at fffffffffffffffe [ 327.538407] IP: [<ffffffff811a7b55>] put_page+0x5/0x50 [ 327.538474] PGD 1a01067 PUD 1a03067 PMD 0 [ 327.538529] Oops: 0000 [#1] SMP [ 327.538574] Modules linked in: macvtap macvlan xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT iptable_filter ip_tables tun bridge stp llc rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache xprtrdma ib_isert iscsi_target_mod ib_iser libiscsi scsi_transport_iscsi ib_srpt target_core_mod ib_srp scsi_transport_srp scsi_tgt ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm ipmi_devintf iTCO_wdt iTCO_vendor_support intel_powerclamp coretemp dcdbas intel_rapl kvm_intel kvm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd pcspkr sb_edac edac_core ipmi_si ipmi_msghandler acpi_pad wmi acpi_power_meter lpc_ich mfd_core mei_me [ 327.539488] mei shpchp nfsd auth_rpcgss nfs_acl lockd grace sunrpc mlx4_ib ib_sa ib_mad ib_core mlx4_en vxlan ib_addr ip_tunnel xfs libcrc32c sd_mod crc_t10dif crct10dif_common crc32c_intel mgag200 syscopyarea sysfillrect sysimgblt i2c_algo_bit drm_kms_helper ttm drm ahci i2c_core libahci mlx4_core libata tg3 ptp pps_core megaraid_sas ntb dm_mirror dm_region_hash dm_log dm_mod [ 327.539956] CPU: 3 PID: 3161 Comm: qemu-kvm Not tainted 3.10.0-240.el7.userfault19.4ca4011.x86_64.debug #1 [ 327.540045] Hardware name: Dell Inc. PowerEdge R420/0CN7CM, BIOS 2.1.2 01/20/2014 [ 327.540115] task: ffff8803280ccf00 ti: ffff880317c58000 task.ti: ffff880317c58000 [ 327.540184] RIP: 0010:[<ffffffff811a7b55>] [<ffffffff811a7b55>] put_page+0x5/0x50 [ 327.540261] RSP: 0018:ffff880317c5bcf8 EFLAGS: 00010246 [ 327.540313] RAX: 00057ffffffff000 RBX: ffff880616a20000 RCX: 0000000000000000 [ 327.540379] RDX: 0000000000002014 RSI: 00057ffffffff000 RDI: fffffffffffffffe [ 327.540445] RBP: ffff880317c5bd10 R08: 0000000000000103 R09: 0000000000000000 [ 327.540511] R10: 0000000000000000 R11: 0000000000000000 R12: fffffffffffffffe [ 327.540576] R13: 0000000000000000 R14: ffff880317c5bd70 R15: ffff880317c5bd50 [ 327.540643] FS: 00007fd230b7f700(0000) GS:ffff880630800000(0000) knlGS:0000000000000000 [ 327.540717] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 327.540771] CR2: fffffffffffffffe CR3: 000000062a2c3000 CR4: 00000000000427e0 [ 327.540837] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 327.540904] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 327.540974] Stack: [ 327.541008] ffffffffa05d6d0c ffff880616a20000 0000000000000000 ffff880317c5bdc0 [ 327.541093] ffffffffa05ddaa2 0000000000000000 00000000002191bf 00000042f3feab2d [ 327.541177] 00000042f3feab2d 0000000000000002 0000000000000001 0321000000000000 [ 327.541261] Call Trace: [ 327.541321] [<ffffffffa05d6d0c>] ? kvm_vcpu_reload_apic_access_page+0x6c/0x80 [kvm] [ 327.543615] [<ffffffffa05ddaa2>] vcpu_enter_guest+0x3f2/0x10f0 [kvm] [ 327.545918] [<ffffffffa05e2f10>] kvm_arch_vcpu_ioctl_run+0x2b0/0x5a0 [kvm] [ 327.548211] [<ffffffffa05e2d02>] ? kvm_arch_vcpu_ioctl_run+0xa2/0x5a0 [kvm] [ 327.550500] [<ffffffffa05ca845>] kvm_vcpu_ioctl+0x2b5/0x680 [kvm] [ 327.552768] [<ffffffff810b8d12>] ? creds_are_invalid.part.1+0x12/0x50 [ 327.555069] [<ffffffff810b8d71>] ? creds_are_invalid+0x21/0x30 [ 327.557373] [<ffffffff812d6066>] ? inode_has_perm.isra.49.constprop.65+0x26/0x80 [ 327.559663] [<ffffffff8122d985>] do_vfs_ioctl+0x305/0x530 [ 327.561917] [<ffffffff8122dc51>] SyS_ioctl+0xa1/0xc0 [ 327.564185] [<ffffffff816de829>] system_call_fastpath+0x16/0x1b [ 327.566480] Code: 0b 31 f6 4c 89 e7 e8 4b 7f ff ff 0f 0b e8 24 fd ff ff e9 a9 fd ff ff 66 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 <48> f7 07 00 c0 00 00 55 48 89 e5 75 2a 8b 47 1c 85 c0 74 1e f0 Signed-off-by:
Andrea Arcangeli <aarcange@redhat.com> Signed-off-by:
-
Xiao Guangrong authored
commit 7cbeed9b upstream. Current permission check assumes that RSVD bit in PFEC is always zero, however, it is not true since MMIO #PF will use it to quickly identify MMIO access Fix it by clearing the bit if walking guest page table is needed Signed-off-by:
-
Paolo Bonzini authored
commit 89876115 upstream. smep_andnot_wp is initialized in kvm_init_shadow_mmu and shadow pages should not be reused for different values of it. Thus, it has to be added to the mask in kvm_mmu_pte_write. Reviewed-by:
-
Ingo Molnar authored
commit e88221c5 upstream. The kernel's handling of 'compacted' xsave state layout is buggy: http://marc.info/?l=linux-kernel&m=142967852317199 I don't have such a system, and the description there is vague, but from extrapolation I guess that there were two kinds of bugs observed: - boot crashes, due to size calculations being wrong and the dynamic allocation allocating a too small xstate area. (This is now fixed in the new FPU code - but still present in stable kernels.) - FPU state corruption and ABI breakage: if signal handlers try to change the FPU state in standard format, which then the kernel tries to restore in the compacted format. These breakages are scary, but they only occur on a small number of systems that have XSAVES* CPU support. Yet we have had XSAVES support in the upstream kernel for a large number of stable kernel releases, and the fixes are involved and unproven. So do the safe resolution first: disable XSAVES* support and only use the standard xstate format. This makes the code work and is easy to backport. On top of this we can work on enabling (and testing!) proper compacted format support, without backporting pressure, on top of the new, cleaned up FPU code. Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Borislav Petkov authored
commit 17fea54b upstream. Derek noticed that a critical MCE gets reported with the wrong error type description: [Hardware Error]: CPU 34: Machine Check Exception: 5 Bank 9: f200003f000100b0 [Hardware Error]: RIP !INEXACT! 10:<ffffffff812e14c1> {intel_idle+0xb1/0x170} [Hardware Error]: TSC 49587b8e321cb [Hardware Error]: PROCESSOR 0:306e4 TIME 1431561296 SOCKET 1 APIC 29 [Hardware Error]: Some CPUs didn't answer in synchronization [Hardware Error]: Machine check: Invalid ^^^^^^^ The last line with 'Invalid' should have printed the high level MCE error type description we get from mce_severity, i.e. something like: [Hardware Error]: Machine check: Action required: data load error in a user process this happens due to the fact that mce_no_way_out() iterates over all MCA banks and possibly overwrites the @msg argument which is used in the panic printing later. Change behavior to take the message of only and the (last) critical MCE it detects. Reported-by:
Derek <denc716@gmail.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Link: http://lkml.kernel.org/r/1431936437-25286-3-git-send-email-bp@alien8.deSigned-off-by:
-
Paolo Bonzini authored
commit 0fdd74f7 upstream. This reverts commit 4473b570. We'll use the hook again. Signed-off-by:
-
Will Deacon authored
commit 5dc5616e upstream. Stage 1 translation is controlled by two sets of page tables (TTBR0 and TTBR1) which grow up and down from zero respectively in the ARMv8 translation regime. For the SMMU, we only care about TTBR0 and, in the case of a 48-bit virtual space, we expect to map virtual addresses 0x0 through to 0xffff_ffff_ffff. Given that some masters may be incapable of emitting virtual addresses targetting TTBR1 (e.g. because they sit on a 48-bit bus), the SMMU architecture allows bit 47 to be sign-extended, halving the virtual range of TTBR0 but allowing TTBR1 to be used. This is controlled by the SEP field in TTBCR2. The SMMU driver incorrectly enables this sign-extension feature, which causes problems when userspace addresses are programmed into a master device with the SMMU expecting to map the incoming transactions via TTBR0; if the top bit of address is set, we will instead get a translation fault since TTBR1 walks are disabled in the TTBCR. This patch fixes the issue by disabling sign-extension of a fixed virtual address bit and instead basing the behaviour on the upstream bus size: the incoming address is zero extended unless the upstream bus is only 49 bits wide, in which case bit 48 is used as the sign bit and is replicated to the upper bits. Reported-by:
Varun Sethi <varun.sethi@freescale.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Oded Gabbay authored
commit 1bf1b431 upstream. This patch fixes a bug in put_pasid_state_wait that appeared in kernel 4.0 The bug is that pasid_state->count wasn't decremented before entering the wait_event. Thus, the condition in wait_event will never be true. The fix is to decrement (atomically) the pasid_state->count before the wait_event. Signed-off-by:
Oded Gabbay <oded.gabbay@amd.com> Signed-off-by:
-
Eric W. Biederman authored
commit 820f9f14 upstream. This is needed to support lazily umounting locked mounts. Because the entire unmounted subtree needs to stay together until there are no users with references to any part of the subtree. To support this guarantee that the fs_pin m_list and s_list nodes are initialized by initializing them in init_fs_pin allowing for the possibility that pin_insert_group does not touch them. Further use hlist_del_init in pin_remove so that there is a hlist_unhashed test before the list we attempt to update the previous list item. Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Eric W. Biederman authored
commit cd4a4017 upstream. The only users of collect_mounts are in audit_tree.c In audit_trim_trees and audit_add_tree_rule the path passed into collect_mounts is generated from kern_path passed an audit_tree pathname which is guaranteed to be an absolute path. In those cases collect_mounts is obviously intended to work on mounted paths and if a race results in paths that are unmounted when collect_mounts it is reasonable to fail early. The paths passed into audit_tag_tree don't have the absolute path check. But are used to play with fsnotify and otherwise interact with the audit_trees, so again operating only on mounted paths appears reasonable. Avoid having to worry about what happens when we try and audit unmounted filesystems by restricting collect_mounts to mounts that appear in the mount tree. Signed-off-by:
-
- 17 May, 2015 12 commits
-
-
Greg Kroah-Hartman authored
-
Lv Zheng authored
commit 1d0a0b2f upstream. ACPICA commit b60612373a4ef63b64a57c124576d7ddb6d8efb6 For physical addresses, since the address may exceed 32-bit address range after calculation, we should use 0x%8.8X%8.8X instead of ACPI_PRINTF_UINT and ACPI_FORMAT_UINT64() instead of ACPI_FORMAT_NATIVE_UINT()/ACPI_FORMAT_TO_UINT(). This patch also removes above replaced macros as there are no users. This is a preparation to switch acpi_physical_address to 64-bit on 32-bit kernel builds. Link: https://github.com/acpica/acpica/commit/b6061237Signed-off-by:
Lv Zheng <lv.zheng@intel.com> Signed-off-by:
Bob Moore <robert.moore@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Dirk Behme <dirk.behme@gmail.com> Signed-off-by:
George G. Davis <george_davis@mentor.com> Signed-off-by:
-
Lv Zheng authored
commit cc2080b0 upstream. ACPICA commit 7f06739db43a85083a70371c14141008f20b2198 For physical addresses, since the address may exceed 32-bit address range after calculation, we should use %8.8X%8.8X (see ACPI_FORMAT_UINT64()) to convert the %p formats. This is a preparation to switch acpi_physical_address to 64-bit on 32-bit kernel builds. Link: https://github.com/acpica/acpica/commit/7f06739dSigned-off-by:
-
Lv Zheng authored
commit 6d3fd3cc upstream. ACPICA commit 154f6d074dd38d6ebc0467ad454454e6c5c9ecdf There are code pieces converting pointers using "(acpi_physical_address) x" or "ACPI_CAST_PTR (t, x)" formats, this patch cleans up them. Known issues: 1. Cleanup of "(ACPI_PHYSICAL_ADDRRESS) x" for a table field For the conversions around the table fields, it is better to fix it with alignment also fixed. So this patch doesn't modify such code. There should be no functional problem by leaving them unchanged. Link: https://github.com/acpica/acpica/commit/154f6d07Signed-off-by:
-
Lv Zheng authored
commit f254e3c5 upstream. ACPICA commit 7d9fd64397d7c38899d3dc497525f6e6b044e0e3 OSPMs like Linux expect an acpi_physical_address returning value from acpi_find_root_pointer(). This triggers warnings if sizeof (acpi_size) doesn't equal to sizeof (acpi_physical_address): drivers/acpi/osl.c:275:3: warning: passing argument 1 of 'acpi_find_root_pointer' from incompatible pointer type [enabled by default] In file included from include/acpi/acpi.h:64:0, from include/linux/acpi.h:36, from drivers/acpi/osl.c:41: include/acpi/acpixf.h:433:1: note: expected 'acpi_size *' but argument is of type 'acpi_physical_address *' This patch corrects acpi_find_root_pointer(). Link: https://github.com/acpica/acpica/commit/7d9fd643Signed-off-by:
-
Al Viro authored
commit 86cc0584 upstream. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Alexey Khoroshilov authored
commit bc26d4d0 upstream. A deadlock can be initiated by userspace via ioctl(SNDCTL_SEQ_OUTOFBAND) on /dev/sequencer with TMR_ECHO midi event. In this case the control flow is: sound_ioctl() -> case SND_DEV_SEQ: case SND_DEV_SEQ2: sequencer_ioctl() -> case SNDCTL_SEQ_OUTOFBAND: spin_lock_irqsave(&lock,flags); play_event(); -> case EV_TIMING: seq_timing_event() -> case TMR_ECHO: seq_copy_to_input() -> spin_lock_irqsave(&lock,flags); It seems that spin_lock_irqsave() around play_event() is not necessary, because the only other call location in seq_startplay() makes the call without acquiring spinlock. So, the patch just removes spinlocks around play_event(). By the way, it removes unreachable code in seq_timing_event(), since (seq_mode == SEQ_2) case is handled in the beginning. Compile tested only. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by:
-
Mark Rutland authored
commit c0978773 upstream. arm64 builds with GCC 5 have caused the __asmeq assertions in the PSCI calling code to fire, so move the ARM PSCI calls out of line into their own assembly file for consistency and to safeguard against the same issue occuring with the 32-bit toolchain. [will: brought into line with arm64 implementation] Reported-by:
Andy Whitcroft <apw@canonical.com> Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
Kevin Hilman <khilman@linaro.org> Signed-off-by:
-
Takeshi Kihara authored
commit bad4371d upstream. f9fd54f2 ("mmc: sh_mmcif: Use msecs_to_jiffies() for host->timeout") changed the timeout value from 1000 jiffies to 1s. In the case where HZ is 1000 the values are the same. However, for smaller HZ values the timeout is now smaller, 1s instead of 10s in the case of HZ=100. Since the timeout occurs in spite of a normal data transfer a timeout of 10s seems more appropriate. This restores the previous timeout in the case where HZ=100 and results in an increase over the previous timeout for larger values of HZ. Fixes: f9fd54f2 ("mmc: sh_mmcif: Use msecs_to_jiffies() for host->timeout") Signed-off-by:
Takeshi Kihara <takeshi.kihara.df@renesas.com> [horms: rewrote changelog to refer to HZ] Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Grygorii Strashko authored
commit 184af16b upstream. The PM_RESTORE_PREPARE is not handled now in mmc_pm_notify(), as result mmc_rescan() could be scheduled and executed at late hibernation restore stages when MMC device is suspended already - which, in turn, will lead to system crash on TI dra7-evm board: WARNING: CPU: 0 PID: 3188 at drivers/bus/omap_l3_noc.c:148 l3_interrupt_handler+0x258/0x374() 44000000.ocp:L3 Custom Error: MASTER MPU TARGET L4_PER1_P3 (Idle): Data Access in User mode during Functional access Hence, add missed PM_RESTORE_PREPARE PM event in mmc_pm_notify(). Fixes: 4c2ef25f (mmc: fix all hangs related to mmc/sd card...) Signed-off-by:
Grygorii Strashko <Grygorii.Strashko@linaro.org> Signed-off-by:
-
Chuanxiao Dong authored
commit 4e93b9a6 upstream. During kernel boot, it will try to read some logical sectors of each block device node for the possible partition table. But since RPMB partition is special and can not be accessed by normal eMMC read / write CMDs, it will cause below error messages during kernel boot: ... mmc0: Got data interrupt 0x00000002 even though no data operation was in progress. mmcblk0rpmb: error -110 transferring data, sector 0, nr 32, cmd response 0x900, card status 0xb00 mmcblk0rpmb: retrying using single block read mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 end_request: I/O error, dev mmcblk0rpmb, sector 0 Buffer I/O error on device mmcblk0rpmb, logical block 0 end_request: I/O error, dev mmcblk0rpmb, sector 8 Buffer I/O error on device mmcblk0rpmb, logical block 1 end_request: I/O error, dev mmcblk0rpmb, sector 16 Buffer I/O error on device mmcblk0rpmb, logical block 2 end_request: I/O error, dev mmcblk0rpmb, sector 24 Buffer I/O error on device mmcblk0rpmb, logical block 3 ... This patch will discard the access request in eMMC queue if it is RPMB partition access request. By this way, it avoids trigger above error messages. Fixes: 090d25fe ("mmc: core: Expose access to RPMB partition") Signed-off-by:
Yunpeng Gao <yunpeng.gao@intel.com> Signed-off-by:
Chuanxiao Dong <chuanxiao.dong@intel.com> Tested-by:
Michael Shigorin <mike@altlinux.org> Signed-off-by:
-
Doug Anderson authored
commit c5272a28 upstream. Way back, when the world was a simpler place and there was no war, no evil, and no kernel bugs, there was just a single pinctrl lock. That was how the world was when (57291ce2 pinctrl: core device tree mapping table parsing support) was written. In that case, there were instances where the pinctrl mutex was already held when pinctrl_register_map() was called, hence a "locked" parameter was passed to the function to indicate that the mutex was already locked (so we shouldn't lock it again). A few years ago in (42fed7ba pinctrl: move subsystem mutex to pinctrl_dev struct), we switched to a separate pinctrl_maps_mutex. ...but (oops) we forgot to re-think about the whole "locked" parameter for pinctrl_register_map(). Basically the "locked" parameter appears to still refer to whether the bigger pinctrl_dev mutex is locked, but we're using it to skip locks of our (now separate) pinctrl_maps_mutex. That's kind of a bad thing(TM). Probably nobody noticed because most of the calls to pinctrl_register_map happen at boot time and we've got synchronous device probing. ...and even cases where we're asynchronous don't end up actually hitting the race too often. ...but after banging my head against the wall for a bug that reproduced 1 out of 1000 reboots and lots of looking through kgdb, I finally noticed this. Anyway, we can now safely remove the "locked" parameter and go back to a war-free, evil-free, and kernel-bug-free world. Fixes: 42fed7ba ("pinctrl: move subsystem mutex to pinctrl_dev struct") Signed-off-by:
Doug Anderson <dianders@chromium.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
