- redefine "printk" as "srm_printk" for bootstrappers;
- fix stack corruption problem with bootp/bootpz loaders and older
  SRM consoles.

The high order bits of the input address should be cleared only after
IO type and base are determined.

- add missing "__user" annotations in csum_partial_copy.c;
- make io_remap_page_range more readable and fix a warning.

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Intel8x0 driver,RME96 driver,ICE1724 driver,NM256 driver
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

While looking at the signal.c coredumping BUG_ON race, I noticed a bug
(not directly related) in do_coredump.  It was setting the "core dumped"
flag even when the format dumping hook failed (e.g.  for memory
allocation failures).
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This is indeed a new bug, and it is not architecture-specific.  In my
recent changes to close some race conditions, I overlooked the case of a
process using PTRACE_ATTACH on its own children.  The new PT_ATTACHED flag
does not really mean "PTRACE_ATTACH was used", it means "PTRACE_ATTACH is
changing the ->parent link".

This fixes the problem that Stephane Eranian program demonstrates.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Oh, duh.  The race is obvious.  Sorry for the confusion there.

The BUG_ON's were useful for debugging, since they trigger on a lot of
errors, but they _also_ trigger on some unlikely (but valid) races.

So just remove them - just fall through to the regular exit code after
core-dumping (which does everything right).
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Doing access control checks with rq_lock held can cause deadlock when
audit messages are created (via printk or audit infrastructure) which
trigger a wakeup and deadlock, as noted by both SELinux and SubDomain
folks.  This patch will let the security checks happen w/out lock held,
then re-sample the p->policy in case it was raced. 

Originally from John Johansen <johansen@immunix.com>, reworked by me.
AFAIK, this version drew no objections from Ingo or Andrea. 

From: John Johansen <johansen@immunix.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Chris Wright <chrisw@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

* writes to PCI config space are non-functional since 2.4.21
* reads of full PCI config space are allowed for normal users
* I'm not aware of any applications using this interface
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* make __ide_dma_verbose() void and drop "__" prefix
* ide_dma_verbose() is always available now
* use it instead of ide_hwif_t->ide_dma_verbose
* sgiioc4.c version reported wrong mode
* icside.c version repeated info given by ->ide_dma_check()
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* add hwif->sg_mapped flag
* add idescsi_map_sg() converting scsi_cmd->sg into
  hwif->sg_table (this removes need for rq->bio)
* remove code (de)allocating rq->bio
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide_build_sglist() can be now used for REQ_DRIVE_TASKFILE requests.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* make Etrax ide.c, icside.c and ide-dma.c use ide_map_sg()
* use one sg for REQ_DRIVE_TASKFILE requests in ide-dma.c
  (no reason for 128 sectors per sg limit)
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Just use ide_dma_[raw_]build_sglist() from ide-dma.c.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

This marks sets change_bits to all ones when bringing up a hub, since
not all hubs seem to send change events for devices that were plugged in
when the hub was reset. 

David Miller confirms this fixes his boot-time lost keyboard/mouse
problem

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into kroah.com:/home/greg/linux/BK/usb-2.6

This updates debug messages, declaring that labels can be constant strings
and changing some old-school dbg() calls to driver model dev_dbg().
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

The recent patch to scrub out ep0 state earlier (to get rid of some of
the enumeration problems that started with about 2.6.6) requires EHCI
to handle endpoint_disable() calls in a slightly different context.

This makes those calls work when an endpoint's QH may still be on the
async schedule, rather than already unlinked.  (The QH stays on the async
schedule for a few milliseconds after it's empty, since it's routine to
issue another request almost immediately.)
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

This has minor PCI tweaks for the EHCI driver:

  - If the (nonfunctional) AMD 8111 controller shows up, ignore it.
    (Patch from Matt Dharm, with minor coding style tweaks).

  - Delete some code that interprets an EHCI capability code; it
    should be a PCI capability instead.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

New and Improved! "Woozy Numbat!"

Pick up the phone in the next two minutes and phone in your
order, and we'll throw in a second copy of Woozy Numbat,
ABSOLUTELY FREE! You too could start a Numbat farm!

lib/kobject_uevent.c:39: warning: `action_to_string' defined but not used
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

From: Keshavamurthy Anil S <anil.s.keshavamurthy@intel.com>

Remove cpu_run_sbin_hotplug() - use kobject_hotplug() instead.
Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>