- 07 Mar, 2014 39 commits
-
-
Christoph Hellwig authored
commit dff6efc3 upstream. Currently notify_change directly updates i_version for size updates, which not only is counter to how all other fields are updated through struct iattr, but also breaks XFS, which need inode updates to happen under its own lock, and synchronized to the structure that gets written to the log. Remove the update in the common code, and it to btrfs and ext4, XFS already does a proper updaste internally and currently gets a double update with the existing code. IMHO this is 3.13 and -stable material and should go in through the XFS tree. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Andreas Dilger <adilger@dilger.ca> Acked-by:
Jan Kara <jack@suse.cz> Reviewed-by:
Dave Chinner <dchinner@redhat.com> Signed-off-by:
Chris Mason <clm@fb.com> Signed-off-by:
Ben Myers <bpm@sgi.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michal Hocko authored
commit ecc736fc upstream. Hugh has reported an endless loop when the hardlimit reclaim sees the same group all the time. This might happen when the reclaim races with the memcg removal. shrink_zone [rmdir root] mem_cgroup_iter(root, NULL, reclaim) // prev = NULL rcu_read_lock() mem_cgroup_iter_load last_visited = iter->last_visited // gets root || NULL css_tryget(last_visited) // failed last_visited = NULL [1] memcg = root = __mem_cgroup_iter_next(root, NULL) mem_cgroup_iter_update iter->last_visited = root; reclaim->generation = iter->generation mem_cgroup_iter(root, root, reclaim) // prev = root rcu_read_lock mem_cgroup_iter_load last_visited = iter->last_visited // gets root css_tryget(last_visited) // failed [1] The issue seemed to be introduced by commit 5f578161 ("memcg: relax memcg iter caching") which has replaced unconditional css_get/css_put by css_tryget/css_put for the cached iterator. This patch fixes the issue by skipping css_tryget on the root of the tree walk in mem_cgroup_iter_load and symmetrically doesn't release it in mem_cgroup_iter_update. Signed-off-by:
Michal Hocko <mhocko@suse.cz> Reported-by:
Hugh Dickins <hughd@google.com> Tested-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit ed98df33 ] sock_alloc_send_pskb() & sk_page_frag_refill() have a loop trying high order allocations to prepare skb with low number of fragments as this increases performance. Problem is that under memory pressure/fragmentation, this can trigger OOM while the intent was only to try the high order allocations, then fallback to order-0 allocations. We had various reports from unexpected regressions. According to David, setting __GFP_NORETRY should be fine, as the asynchronous compaction is still enabled, and this will prevent OOM from kicking as in : CFSClientEventm invoked oom-killer: gfp_mask=0x42d0, order=3, oom_adj=0, oom_score_adj=0, oom_score_badness=2 (enabled),memcg_scoring=disabled CFSClientEventm Call Trace: [<ffffffff8043766c>] dump_header+0xe1/0x23e [<ffffffff80437a02>] oom_kill_process+0x6a/0x323 [<ffffffff80438443>] out_of_memory+0x4b3/0x50d [<ffffffff8043a4a6>] __alloc_pages_may_oom+0xa2/0xc7 [<ffffffff80236f42>] __alloc_pages_nodemask+0x1002/0x17f0 [<ffffffff8024bd23>] alloc_pages_current+0x103/0x2b0 [<ffffffff8028567f>] sk_page_frag_refill+0x8f/0x160 [<ffffffff80295fa0>] tcp_sendmsg+0x560/0xee0 [<ffffffff802a5037>] inet_sendmsg+0x67/0x100 [<ffffffff80283c9c>] __sock_sendmsg_nosec+0x6c/0x90 [<ffffffff80283e85>] sock_sendmsg+0xc5/0xf0 [<ffffffff802847b6>] __sys_sendmsg+0x136/0x430 [<ffffffff80284ec8>] sys_sendmsg+0x88/0x110 [<ffffffff80711472>] system_call_fastpath+0x16/0x1b Out of Memory: Kill process 2856 (bash) score 9999 or sacrifice child Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
David Rientjes <rientjes@google.com> Acked-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Florian Westphal authored
commit fe6cc55f upstream. Marcelo Ricardo Leitner reported problems when the forwarding link path has a lower mtu than the incoming one if the inbound interface supports GRO. Given: Host <mtu1500> R1 <mtu1200> R2 Host sends tcp stream which is routed via R1 and R2. R1 performs GRO. In this case, the kernel will fail to send ICMP fragmentation needed messages (or pkt too big for ipv6), as GSO packets currently bypass dstmtu checks in forward path. Instead, Linux tries to send out packets exceeding the mtu. When locking route MTU on Host (i.e., no ipv4 DF bit set), R1 does not fragment the packets when forwarding, and again tries to send out packets exceeding R1-R2 link mtu. This alters the forwarding dstmtu checks to take the individual gso segment lengths into account. For ipv6, we send out pkt too big error for gso if the individual segments are too big. For ipv4, we either send icmp fragmentation needed, or, if the DF bit is not set, perform software segmentation and let the output path create fragments when the packet is leaving the machine. It is not 100% correct as the error message will contain the headers of the GRO skb instead of the original/segmented one, but it seems to work fine in my (limited) tests. Eric Dumazet suggested to simply shrink mss via ->gso_size to avoid sofware segmentation. However it turns out that skb_segment() assumes skb nr_frags is related to mss size so we would BUG there. I don't want to mess with it considering Herbert and Eric disagree on what the correct behavior should be. Hannes Frederic Sowa notes that when we would shrink gso_size skb_segment would then also need to deal with the case where SKB_MAX_FRAGS would be exceeded. This uses sofware segmentation in the forward path when we hit ipv4 non-DF packets and the outgoing link mtu is too small. Its not perfect, but given the lack of bug reports wrt. GRO fwd being broken this is a rare case anyway. Also its not like this could not be improved later once the dust settles. Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Reported-by:
Marcelo Ricardo Leitner <mleitner@redhat.com> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Florian Westphal authored
commit d2069403 upstream. Will be used by upcoming ipv4 forward path change that needs to determine feature mask using skb->dst->dev instead of skb->dev. Signed-off-by:
-
Florian Westphal authored
commit de960aa9 upstream. [ no skb_gso_seglen helper in 3.10, leave tbf alone ] This moves part of Eric Dumazets skb_gso_seglen helper from tbf sched to skbuff core so it may be reused by upcoming ip forwarding path patch. Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit ffd59393 ] SCTP's sctp_connectx() abi breaks for 64bit kernels compiled with 32bit emulation (e.g. ia32 emulation or x86_x32). Due to internal usage of 'struct sctp_getaddrs_old' which includes a struct sockaddr pointer, sizeof(param) check will always fail in kernel as the structure in 64bit kernel space is 4bytes larger than for user binaries compiled in 32bit mode. Thus, applications making use of sctp_connectx() won't be able to run under such circumstances. Introduce a compat interface in the kernel to deal with such situations by using a 'struct compat_sctp_getaddrs_old' structure where user data is copied into it, and then sucessively transformed into a 'struct sctp_getaddrs_old' structure with the help of compat_ptr(). That fixes sctp_connectx() abi without any changes needed in user space, and lets the SCTP test suite pass when compiled in 32bit and run on 64bit kernels. Fixes: f9c67811 ("sctp: Fix regression introduced by new sctp_connectx api") Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Acked-by:
Vlad Yasevich <vyasevich@gmail.com> Signed-off-by:
-
Duan Jiong authored
[ Upstream commit a6254864 ] since commit 89aef892("ipv4: Delete routing cache."), the counter in_slow_tot can't work correctly. The counter in_slow_tot increase by one when fib_lookup() return successfully in ip_route_input_slow(), but actually the dst struct maybe not be created and cached, so we can increase in_slow_tot after the dst struct is created. Signed-off-by:
Duan Jiong <duanj.fnst@cn.fujitsu.com> Signed-off-by:
-
Jiri Bohac authored
[ Upstream commit 163c8ff3 ] aggregator_identifier is used to assign unique aggregator identifiers to aggregators of a bond during device enslaving. aggregator_identifier is currently a global variable that is zeroed in bond_3ad_initialize(). This sequence will lead to duplicate aggregator identifiers for eth1 and eth3: create bond0 change bond0 mode to 802.3ad enslave eth0 to bond0 //eth0 gets agg id 1 enslave eth1 to bond0 //eth1 gets agg id 2 create bond1 change bond1 mode to 802.3ad enslave eth2 to bond1 //aggregator_identifier is reset to 0 //eth2 gets agg id 1 enslave eth3 to bond0 //eth3 gets agg id 2 Fix this by making aggregator_identifier private to the bond. Signed-off-by:
Jiri Bohac <jbohac@suse.cz> Acked-by:
Veaceslav Falico <vfalico@redhat.com> Signed-off-by:
-
Emil Goode authored
[ Upstream commit eb85569f ] This patch removes a generic hard_header_len check from the usbnet module that is causing dropped packages under certain circumstances for devices that send rx packets that cross urb boundaries. One example is the AX88772B which occasionally send rx packets that cross urb boundaries where the remaining partial packet is sent with no hardware header. When the buffer with a partial packet is of less number of octets than the value of hard_header_len the buffer is discarded by the usbnet module. With AX88772B this can be reproduced by using ping with a packet size between 1965-1976. The bug has been reported here: https://bugzilla.kernel.org/show_bug.cgi?id=29082 This patch introduces the following changes: - Removes the generic hard_header_len check in the rx_complete function in the usbnet module. - Introduces a ETH_HLEN check for skbs that are not cloned from within a rx_fixup callback. - For safety a hard_header_len check is added to each rx_fixup callback function that could be affected by this change. These extra checks could possibly be removed by someone who has the hardware to test. - Removes a call to dev_kfree_skb_any() and instead utilizes the dev->done list to queue skbs for cleanup. The changes place full responsibility on the rx_fixup callback functions that clone skbs to only pass valid skbs to the usbnet_skb_return function. Signed-off-by:
Emil Goode <emilgoode@gmail.com> Reported-by:
Igor Gnatenko <i.gnatenko.brain@gmail.com> Signed-off-by:
-
Emil Goode authored
[ Upstream commit d43ff4cd ] The struct driver_info ax88178_info is assigned the function asix_rx_fixup_common as it's rx_fixup callback. This means that FLAG_MULTI_PACKET must be set as this function is cloning the data and calling usbnet_skb_return. Not setting this flag leads to usbnet_skb_return beeing called a second time from within the rx_process function in the usbnet module. Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Nithin Sujir authored
[ Upstream commit c6993dfd ] Quoting David Vrabel - "5780 cards cannot have jumbo frames and TSO enabled together. When jumbo frames are enabled by setting the MTU, the TSO feature must be cleared. This is done indirectly by calling netdev_update_features() which will call tg3_fix_features() to actually clear the flags. netdev_update_features() will also trigger a new netlink message for the feature change event which will result in a call to tg3_get_stats64() which deadlocks on the tg3 lock." tg3_set_mtu() does not need to be under the tg3 lock since converting the flags to use set_bit(). Move it out to after tg3_netif_stop(). Reported-by:
David Vrabel <david.vrabel@citrix.com> Tested-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by:
-
John Ogness authored
[ Upstream commit bf06200e ] Commit 46d3ceab ("tcp: TCP Small Queues") introduced a possible regression for applications using TCP_NODELAY. If TCP session is throttled because of tsq, we should consult tp->nonagle when TX completion is done and allow us to send additional segment, especially if this segment is not a full MSS. Otherwise this segment is sent after an RTO. [edumazet] : Cooked the changelog, added another fix about testing sk_wmem_alloc twice because TX completion can happen right before setting TSQ_THROTTLED bit. This problem is particularly visible with recent auto corking, but might also be triggered with low tcp_limit_output_bytes values or NIC drivers delaying TX completion by hundred of usec, and very low rtt. Thomas Glanzmann for example reported an iscsi regression, caused by tcp auto corking making this bug quite visible. Fixes: 46d3ceab ("tcp: TCP Small Queues") Signed-off-by:
John Ogness <john.ogness@linutronix.de> Signed-off-by:
Thomas Glanzmann <thomas@glanzmann.de> Signed-off-by:
-
Bjørn Mork authored
[ Upstream commit fbd3a77d ] This device was mentioned in an OpenWRT forum. Seems to have a "standard" Sierra Wireless ifnumber to function layout: 0: qcdm 2: nmea 3: modem 8: qmi 9: storage Signed-off-by:
-
Sabrina Dubroca authored
[ Upstream commit 00fe11b3 ] Currently, to make netconsole start over IPv6, the source address needs to be specified. Without a source address, netpoll_parse_options assumes we're setting up over IPv4 and the destination IPv6 address is rejected. Check if the IP version has been forced by a source address before checking for a version mismatch when parsing the destination address. Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Acked-by:
Cong Wang <cwang@twopensource.com> Signed-off-by:
-
Maciej Żenczykowski authored
[ Upstream commit 946c032e ] ip rules with iif/oif references do not update: (detach/attach) across interface renames. Signed-off-by:
Maciej Żenczykowski <maze@google.com> CC: Willem de Bruijn <willemb@google.com> CC: Eric Dumazet <edumazet@google.com> CC: Chris Davis <chrismd@google.com> CC: Carlo Contavalli <ccontavalli@google.com> Google-Bug-Id: 12936021 Acked-by:
-
Geert Uytterhoeven authored
[ Upstream commit 63b5f152 ] On m68k/ARAnyM: WARNING: CPU: 0 PID: 407 at net/ipv4/devinet.c:1599 0x316a99() Modules linked in: CPU: 0 PID: 407 Comm: ifconfig Not tainted 3.13.0-atari-09263-g0c71d68014d1 #1378 Stack from 10c4fdf0: 10c4fdf0 002ffabb 000243e8 00000000 008ced6c 00024416 00316a99 0000063f 00316a99 00000009 00000000 002501b4 00316a99 0000063f c0a86117 00000080 c0a86117 00ad0c90 00250a5a 00000014 00ad0c90 00000000 00000000 00000001 00b02dd0 00356594 00000000 00356594 c0a86117 eff6c9e4 008ced6c 00000002 008ced60 0024f9b4 00250b52 00ad0c90 00000000 00000000 00252390 00ad0c90 eff6c9e4 0000004f 00000000 00000000 eff6c9e4 8000e25c eff6c9e4 80001020 Call Trace: [<000243e8>] warn_slowpath_common+0x52/0x6c [<00024416>] warn_slowpath_null+0x14/0x1a [<002501b4>] rtmsg_ifa+0xdc/0xf0 [<00250a5a>] __inet_insert_ifa+0xd6/0x1c2 [<0024f9b4>] inet_abc_len+0x0/0x42 [<00250b52>] inet_insert_ifa+0xc/0x12 [<00252390>] devinet_ioctl+0x2ae/0x5d6 Adding some debugging code reveals that net_fill_ifaddr() fails in put_cacheinfo(skb, ifa->ifa_cstamp, ifa->ifa_tstamp, preferred, valid)) nla_put complains: lib/nlattr.c:454: skb_tailroom(skb) = 12, nla_total_size(attrlen) = 20 Apparently commit 5c766d64 ("ipv4: introduce address lifetime") forgot to take into account the addition of struct ifa_cacheinfo in inet_nlmsg_size(). Hence add it, like is already done for ipv6. Suggested-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Oliver Hartkopp authored
[ Upstream commit 0ae89beb ] Self generated skbuffs in net/can/bcm.c are setting a skb->sk reference but no explicit destructor which is enforced since Linux 3.11 with commit 376c7311 (net: add a temporary sanity check in skb_orphan()). This patch adds some helper functions to make sure that a destructor is properly defined when a sock reference is assigned to a CAN related skb. To create an unshared skb owned by the original sock a common helper function has been introduced to replace open coded functions to create CAN echo skbs. Signed-off-by:
Oliver Hartkopp <socketcan@hartkopp.net> Tested-by:
Andre Naujoks <nautsch2@gmail.com> Reviewed-by:
-
Richard Yao authored
[ Upstream commit b6f52ae2 ] The 9p-virtio transport does zero copy on things larger than 1024 bytes in size. It accomplishes this by returning the physical addresses of pages to the virtio-pci device. At present, the translation is usually a bit shift. That approach produces an invalid page address when we read/write to vmalloc buffers, such as those used for Linux kernel modules. Any attempt to load a Linux kernel module from 9p-virtio produces the following stack. [<ffffffff814878ce>] p9_virtio_zc_request+0x45e/0x510 [<ffffffff814814ed>] p9_client_zc_rpc.constprop.16+0xfd/0x4f0 [<ffffffff814839dd>] p9_client_read+0x15d/0x240 [<ffffffff811c8440>] v9fs_fid_readn+0x50/0xa0 [<ffffffff811c84a0>] v9fs_file_readn+0x10/0x20 [<ffffffff811c84e7>] v9fs_file_read+0x37/0x70 [<ffffffff8114e3fb>] vfs_read+0x9b/0x160 [<ffffffff81153571>] kernel_read+0x41/0x60 [<ffffffff810c83ab>] copy_module_from_fd.isra.34+0xfb/0x180 Subsequently, QEMU will die printing: qemu-system-x86_64: virtio: trying to map MMIO memory This patch enables 9p-virtio to correctly handle this case. This not only enables us to load Linux kernel modules off virtfs, but also enables ZFS file-based vdevs on virtfs to be used without killing QEMU. Special thanks to both Avi Kivity and Alexander Graf for their interpretation of QEMU backtraces. Without their guidence, tracking down this bug would have taken much longer. Also, special thanks to Linus Torvalds for his insightful explanation of why this should use is_vmalloc_addr() instead of is_vmalloc_or_module_addr(): https://lkml.org/lkml/2014/2/8/272Signed-off-by:
Richard Yao <ryao@gentoo.org> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 20e7c4e8 ] When a device ndo_start_xmit() calls again dev_queue_xmit(), lockdep can complain because dev_queue_xmit() is re-entered and the spinlocks protecting tx queues share a common lockdep class. Same issue was fixed for bonding/l2tp/ppp in commits 0daa2303 ("[PATCH] bonding: lockdep annotation") 49ee4920 ("bonding: set qdisc_tx_busylock to avoid LOCKDEP splat") 23d3b8bf ("net: qdisc busylock needs lockdep annotations ") 303c07db ("ppp: set qdisc_tx_busylock to avoid LOCKDEP splat ") Reported-by:
Alexander Aring <alex.aring@gmail.com> Signed-off-by:
-
Olivier Langlois authored
commit f78bccd7 upstream. rtl8192ce is disabling for too long the local interrupts during hw initiatialisation when performing scans The observable symptoms in dmesg can be: - underruns from ALSA playback - clock freezes (tstamps do not change for several dmesg entries until irqs are finaly reenabled): [ 250.817669] rtlwifi:rtl_op_config():<0-0-0> 0x100 [ 250.817685] rtl8192ce:_rtl92ce_phy_set_rf_power_state():<0-1-0> IPS Set eRf nic enable [ 250.817732] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.817796] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.817910] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.818024] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.818139] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.818253] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.818367] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.818472] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.818472] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.818472] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.818472] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.818472] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:98053f15:10 [ 250.818472] rtl8192ce:rtl92ce_sw_led_on():<0-1-0> LedAddr:4E ledpin=1 [ 250.818472] rtl8192c_common:rtl92c_download_fw():<0-1-0> Firmware Version(49), Signature(0x88c1),Size(32) [ 250.818472] rtl8192ce:rtl92ce_enable_hw_security_config():<0-1-0> PairwiseEncAlgorithm = 0 GroupEncAlgorithm = 0 [ 250.818472] rtl8192ce:rtl92ce_enable_hw_security_config():<0-1-0> The SECR-value cc [ 250.818472] rtl8192c_common:rtl92c_dm_check_txpower_tracking_thermal_meter():<0-1-0> Schedule TxPowerTracking direct call!! [ 250.818472] rtl8192c_common:rtl92c_dm_txpower_tracking_callback_thermalmeter():<0-1-0> rtl92c_dm_txpower_tracking_callback_thermalmeter [ 250.818472] rtl8192c_common:rtl92c_dm_txpower_tracking_callback_thermalmeter():<0-1-0> Readback Thermal Meter = 0xe pre thermal meter 0xf eeprom_thermalmeter 0xf [ 250.818472] rtl8192c_common:rtl92c_dm_txpower_tracking_callback_thermalmeter():<0-1-0> Initial pathA ele_d reg0xc80 = 0x40000000, ofdm_index=0xc [ 250.818472] rtl8192c_common:rtl92c_dm_txpower_tracking_callback_thermalmeter():<0-1-0> Initial reg0xa24 = 0x90e1317, cck_index=0xc, ch14 0 [ 250.818472] rtl8192c_common:rtl92c_dm_txpower_tracking_callback_thermalmeter():<0-1-0> Readback Thermal Meter = 0xe pre thermal meter 0xf eeprom_thermalmeter 0xf delta 0x1 delta_lck 0x0 delta_iqk 0x0 [ 250.818472] rtl8192c_common:rtl92c_dm_txpower_tracking_callback_thermalmeter():<0-1-0> <=== [ 250.818472] rtl8192c_common:rtl92c_dm_initialize_txpower_tracking_thermalmeter():<0-1-0> pMgntInfo->txpower_tracking = 1 [ 250.818472] rtl8192ce:rtl92ce_led_control():<0-1-0> ledaction 3 [ 250.818472] rtl8192ce:rtl92ce_sw_led_on():<0-1-0> LedAddr:4E ledpin=1 [ 250.818472] rtlwifi:rtl_ips_nic_on():<0-1-0> before spin_unlock_irqrestore [ 251.154656] PCM: Lost interrupts? [Q]-0 (stream=0, delta=15903, new_hw_ptr=293408, old_hw_ptr=277505) The exact code flow that causes that is: 1. wpa_supplicant send a start_scan request to the nl80211 driver 2. mac80211 module call rtl_op_config with IEEE80211_CONF_CHANGE_IDLE 3. rtl_ips_nic_on is called which disable local irqs 4. rtl92c_phy_set_rf_power_state() is called 5. rtl_ps_enable_nic() is called and hw_init()is executed and then the interrupts on the device are enabled A good solution could be to refactor the code to avoid calling rtl92ce_hw_init() with the irqs disabled but a quick and dirty solution that has proven to work is to reenable the irqs during the function rtl92ce_hw_init(). I think that it is safe doing so since the device interrupt will only be enabled after the init function succeed. Signed-off-by:
Olivier Langlois <olivier@trillion01.com> Acked-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Olivier Langlois authored
commit 2e8c5e56 upstream. rtl_ps_enable_nic() is called from loops that will loop until this function returns true or a maximum number of retries is performed. hw_init() returns non-zero on error. In that situation return false to restore the original design intent to retry hw init when it fails. Signed-off-by:
-
Stanislaw Gruszka authored
commit b6213e41 upstream. This patch fixes regression caused by commit a16dad77 "MIPS: Fix potencial corruption". That commit fixes one corruption scenario in cost of adding another one, which actually start to cause crashes on Yeeloong laptop when rtl8187 driver is used. For correct DMA read operation on machines without DMA coherence, kernel have to invalidate cache, such it will refill later with new data that device wrote to memory, when that data is needed to process. We can only invalidate full cache line. Hence when cache line includes both dma buffer and some other data (written in cache, but not yet in main memory), the other data can not hit memory due to invalidation. That happen on rtl8187 where struct rtl8187_priv fields are located just before and after small buffers that are passed to USB layer and DMA is performed on them. To fix the problem we align buffers and reserve space after them to make them match cache line. This patch does not resolve all possible MIPS problems entirely, for that we have to assure that we always map cache aligned buffers for DMA, what can be complex or even not possible. But patch fixes visible and reproducible regression and seems other possible corruptions do not happen in practice, since Yeeloong laptop works stable without rtl8187 driver. Bug report: https://bugzilla.kernel.org/show_bug.cgi?id=54391Reported-by:
Petr Pisar <petr.pisar@atlas.cz> Bisected-by:
Tom Li <biergaizi2009@gmail.com> Reported-and-tested-by:
Stanislaw Gruszka <stf_xl@wp.pl> Acked-by:
Larry Finger <Larry.Finger@lwfinger.next> Acked-by:
Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by:
-
Pavel Shilovsky authored
commit 2365c4ea upstream. SMB3 servers can respond with MaxTransactSize of more than 4M that can cause a memory allocation error returned from kmalloc in a lock codepath. Also the client doesn't support multicredit requests now and allows buffer sizes of 65536 bytes only. Set MaxTransactSize to this maximum supported value. Signed-off-by:
Pavel Shilovsky <piastry@etersoft.ru> Acked-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Jeff Layton authored
commit 5d81de8e upstream. It's possible for userland to pass down an iovec via writev() that has a bogus user pointer in it. If that happens and we're doing an uncached write, then we can end up getting less bytes than we expect from the call to iov_iter_copy_from_user. This is CVE-2014-0069 cifs_iovec_write isn't set up to handle that situation however. It'll blindly keep chugging through the page array and not filling those pages with anything useful. Worse yet, we'll later end up with a negative number in wdata->tailsz, which will confuse the sending routines and cause an oops at the very least. Fix this by having the copy phase of cifs_iovec_write stop copying data in this situation and send the last write as a short one. At the same time, we want to avoid sending a zero-length write to the server, so break out of the loop and set rc to -EFAULT if that happens. This also allows us to handle the case where no address in the iovec is valid. [Note: Marking this for stable on v3.4+ kernels, but kernels as old as v2.6.38 may have a similar problem and may need similar fix] Reviewed-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Chen Gang authored
commit 8d80390c upstream. For avr32 cross compiler, do not define '__linux__' internally, so it will cause issue with allmodconfig. The related error: CC [M] fs/coda/psdev.o In file included from include/linux/coda.h:64, from fs/coda/psdev.c:45: include/uapi/linux/coda.h:221: error: expected specifier-qualifier-list before 'u_quad_t' The related toolchain version (which only download, not re-compile): [root@gchen linux-next]# /upstream/toolchain/download/avr32-gnu-toolchain-linux_x86/bin/avr32-gcc -v Using built-in specs. Target: avr32 Configured with: /data2/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/src/gcc/configure --target=avr32 --host=i686-pc-linux-gnu --build=x86_64-pc-linux-gnu --prefix=/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/avr32-gnu-toolchain-linux_x86 --enable-languages=c,c++ --disable-nls --disable-libssp --disable-libstdcxx-pch --with-dwarf2 --enable-version-specific-runtime-libs --disable-shared --enable-doc --with-mpfr-lib=/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/avr32-gnu-toolchain-linux_x86/lib --with-mpfr-include=/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/avr32-gnu-toolchain-linux_x86/include --with-gmp=/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/avr32-gnu-toolchain-linux_x86 --with-mpc=/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/avr32-gnu-toolchain-linux_x86 --enable-__cxa_atexit --disable-shared --with-newlib --with-pkgversion=AVR_32_bit_GNU_Toolchain_3.4.2_435 --with-bugurl=http://www .atmel.com/avr Thread model: single gcc version 4.4.7 (AVR_32_bit_GNU_Toolchain_3.4.2_435) Signed-off-by:
Chen Gang <gang.chen.5i5j@gmail.com> Acked-by:
Hans-Christian Egtvedt <hegtvedt@cisco.com> Signed-off-by:
-
Paul Gortmaker authored
commit 5745d6a4 upstream. Causing this: In file included from arch/avr32/boards/mimc200/fram.c:13: include/linux/miscdevice.h:51: error: field 'list' has incomplete type include/linux/miscdevice.h:55: error: expected specifier-qualifier-list before 'mode_t' arch/avr32/boards/mimc200/fram.c:42: error: 'THIS_MODULE' undeclared here (not in a function) Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
Sergei Trofimovich <slyfox@gentoo.org> Acked-by:
Hans-Christian Egtvedt <egtvedt@samfundet.no> Signed-off-by:
-
Pekon Gupta authored
commit 980386d2 upstream. Fixes: commit 75d3625e ARM: OMAP2+: gpmc: add DT bindings for OneNAND OMAP SoC(s) depend on GPMC controller driver to parse GPMC DT child nodes and register them platform_device for ONENAND driver to probe later. However this does not happen if generic MTD_ONENAND framework is built as module (CONFIG_MTD_ONENAND=m). Therefore, when MTD/ONENAND and MTD/ONENAND/OMAP2 modules are loaded, they are unable to find any matching platform_device and remain un-binded. This causes on board ONENAND flash to remain un-detected. This patch causes GPMC controller to parse DT nodes when CONFIG_MTD_ONENAND=y || CONFIG_MTD_ONENAND=m Signed-off-by:
Pekon Gupta <pekon@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Pekon Gupta authored
commit 6b187b21 upstream. Fixes: commit bc6b1e7b ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND OMAP SoC(s) depend on GPMC controller driver to parse GPMC DT child nodes and register them platform_device for NAND driver to probe later. However this does not happen if generic MTD_NAND framework is built as module (CONFIG_MTD_NAND=m). Therefore, when MTD/NAND and MTD/NAND/OMAP2 modules are loaded, they are unable to find any matching platform_device and remain un-binded. This causes on board NAND flash to remain un-detected. This patch causes GPMC controller to parse DT nodes when CONFIG_MTD_NAND=y || CONFIG_MTD_NAND=m Signed-off-by:
-
Vinayak Kale authored
commit 39544ac9 upstream. Add DSB after icache flush to complete the cache maintenance operation. Signed-off-by:
Vinayak Kale <vkale@apm.com> Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Will Deacon authored
commit bae0ca2b upstream. During __v{6,7}_setup, we invalidate the TLBs since we are about to enable the MMU on return to head.S. Unfortunately, without a subsequent dsb instruction, the invalidation is not guaranteed to have completed by the time we write to the sctlr, potentially exposing us to junk/stale translations cached in the TLB. This patch reworks the init functions so that the dsb used to ensure completion of cache/predictor maintenance is also used to ensure completion of the TLB invalidation. Reported-by:
Albin Tonnerre <Albin.Tonnerre@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Marek Szyprowski authored
commit 10c8562f upstream. GFP_ATOMIC is not a single gfp flag, but a macro which expands to the other flags and LACK of __GFP_WAIT flag. To check if caller wanted to perform an atomic allocation, the code must test __GFP_WAIT flag presence. This patch fixes the issue introduced in v3.6-rc5 Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Theodore Ts'o authored
commit 19ea8060 upstream. If the i_crtime field is not present in the inode, don't leave the field uninitialized. Fixes: ef7f3835 ("ext4: Add nanosecond timestamps") Reported-by:
Vegard Nossum <vegard.nossum@oracle.com> Tested-by:
"Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
-
Theodore Ts'o authored
commit 3d2660d0 upstream. The set_flexbg_block_bitmap() function assumed that the number of blocks in a blockgroup was sb->blocksize * 8, which is normally true, but not always! Use EXT4_BLOCKS_PER_GROUP(sb) instead, to fix block bitmap corruption after: mke2fs -t ext4 -g 3072 -i 4096 /dev/vdd 1G mount -t ext4 /dev/vdd /vdd resize2fs /dev/vdd 8G Signed-off-by:
Jon Bernard <jbernard@tuxion.com> Signed-off-by:
-
Theodore Ts'o authored
commit b93c9535 upstream. If a file system has a large number of inodes per block group, all of the metadata blocks in a flex_bg may be larger than what can fit in a single block group. Unfortunately, ext4_alloc_group_tables() in resize.c was never tested to see if it would handle this case correctly, and there were a large number of bugs which caused the following sequence to result in a BUG_ON: kernel bug at fs/ext4/resize.c:409! ... call trace: [<ffffffff81256768>] ext4_flex_group_add+0x1448/0x1830 [<ffffffff81257de2>] ext4_resize_fs+0x7b2/0xe80 [<ffffffff8123ac50>] ext4_ioctl+0xbf0/0xf00 [<ffffffff811c111d>] do_vfs_ioctl+0x2dd/0x4b0 [<ffffffff811b9df2>] ? final_putname+0x22/0x50 [<ffffffff811c1371>] sys_ioctl+0x81/0xa0 [<ffffffff81676aa9>] system_call_fastpath+0x16/0x1b code: c8 4c 89 df e8 41 96 f8 ff 44 89 e8 49 01 c4 44 29 6d d4 0 rip [<ffffffff81254fa1>] set_flexbg_block_bitmap+0x171/0x180 This can be reproduced with the following command sequence: mke2fs -t ext4 -i 4096 /dev/vdd 1G mount -t ext4 /dev/vdd /vdd resize2fs /dev/vdd 8G To fix this, we need to make sure the right thing happens when a block group's inode table straddles two block groups, which means the following bugs had to be fixed: 1) Not clearing the BLOCK_UNINIT flag in the second block group in ext4_alloc_group_tables --- the was proximate cause of the BUG_ON. 2) Incorrectly determining how many block groups contained contiguous free blocks in ext4_alloc_group_tables(). 3) Incorrectly setting the start of the next block range to be marked in use after a discontinuity in setup_new_flex_group_blocks(). Signed-off-by:
-
Theodore Ts'o authored
commit 23301410 upstream. If an ext4 file system is created by some tool other than mke2fs (perhaps by someone who has a pathalogical fear of the GPL) that doesn't set one or the other of the EXT2_FLAGS_{UN}SIGNED_HASH flags, and that file system is then mounted read-only, don't try to modify the s_flags field. Otherwise, if dm_verity is in use, the superblock will change, causing an dm_verity failure. Signed-off-by:
-
Zheng Liu authored
commit 30d29b11 upstream. In swap_inode_boot_loader() we forgot to release ->i_mutex and resume unlocked dio for inode and inode_bl if there is an error starting the journal handle. This commit fixes this issue. Reported-by:
Ahmed Tamrawi <ahmedtamrawi@gmail.com> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Dr. Tilmann Bubeck <t.bubeck@reinform.de> Signed-off-by:
Zheng Liu <wenqing.lz@taobao.com> Signed-off-by:
-
Ilia Mirkin authored
commit a7f1c1e6 upstream. Commit 0a0afd28 ("drm/nv50-/disp: move DP link training to core and train from supervisor") added code that uses the wrong register for computing the display bpp, used for bandwidth calculation. Adjust to use the same register as used by exec_clkcmp and nv50_disp_intr_unk20_2_dp. Reported-by:
Torsten Wagner <torsten.wagner@gmail.com> Reported-by:
Michael Gulick <mgulick@mathworks.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67628Signed-off-by:
Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Ilia Mirkin authored
commit 7d3428cd upstream. Since commit 0fa9061a ("drm/nouveau/mc: handle irq-related setup ourselves"), drm_device->irq_enabled remained unset. This is needed in order to properly wait for a vblank event in the generic drm code. See https://bugs.freedesktop.org/show_bug.cgi?id=74195Reported-by:
Jan Janecek <janjanjanx@gmail.com> Signed-off-by:
-
- 22 Feb, 2014 1 commit
-
-
Greg Kroah-Hartman authored
-
