- 26 Aug, 2015 9 commits
-
-
Ville Syrjälä authored
Move the CHV clock buffer disable from chv_disable_pll() to the new encoder .post_pll_disable() hook. This is more symmetric since the clock buffer enable happens from the .pre_pll_enable() hook. We'll have more use for the new hook soon. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Deepak S <deepak.s@linux.intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
The docs give you the impression that the unique transition scale value shouldn't matter when unique transition scale is enabled. But as Imre found on BXT (and I verfied also on BSW) the value does matter. So from now on just program the same value 0x9a always. Cc: Imre Deak <imre.deak@intel.com> Signed-off-by:
-
Ville Syrjälä authored
When fractional m2 divider isn't used on CHV the fractional part is ignore by the hardware. Despite that, program the fractional value (0 in this case) to the hardware register just to keep things a bit more consistent. Might at least make register dumps a bit less confusing when there isn't some stale fractional part hanging around. Signed-off-by:
-
Dave Gordon authored
The current versions of these two macros don't work correctly if the argument expression happens to contain a modulo operator (%) -- when stringified, it gets interpreted as a printf formatting character! With a specifically crafted parameter, this could probably cause a kernel OOPS; consider WARN_ON(p%s) or WARN_ON(f %*pEp). Instead, we should use an explicit "%s" format, with the stringified expression as the coresponding literal-string argument. Signed-off-by:
Dave Gordon <david.s.gordon@intel.com> Reviewed-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
-
Ville Syrjälä authored
With MST there won't be a crtc assigned to the main link encoder, so trying to dig up the pipe_config from there is a recipe for an oops. Instead store the parameters (lane_count and link_rate) in the encoder, and use those values during link training etc. Since those parameters are now assigned only when the link is actually enabled, .compute_config() won't clobber them as it did before. Hardware state readout is still bonkers though as we don't transfer the link parameters from pipe_config intel_dp. We should do that during encoder sanitation. But since we don't even do a proper job of reading out the main link encoder state for MST there's littel point in worrying about this now. Fixes a regression with MST caused by: commit 90a6b7b0 Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Mon Jul 6 16:39:15 2015 +0300 drm/i915: Move intel_dp->lane_count into pipe_config v2: Different apporoach that should keep intel_dp_check_mst_status() somewhat less oopsy Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reported-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
-
Imre Deak authored
Due to a coherency issue on BXT A steppings we can't guarantee a coherent view of cached (CPU snooped) GPU mappings, so fail such requests. User space is supposed to fall back to uncached mappings in this case. v2: - limit the WA to A steppings, on later stepping this HW issue is fixed v3: - return error instead of trying to work around the issue in kernel, since that could confuse user space (Chris) Testcast: igt/gem_store_dword_batches_loop/cached-mapping Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Imre Deak authored
By running igt/store_dword_loop_render on BXT we can hit a coherency problem where the seqno written at GPU command completion time is not seen by the CPU. This results in __i915_wait_request seeing the stale seqno and not completing the request (not considering the lost interrupt/GPU reset mechanism). I also verified that this isn't a case of a lost interrupt, or that the command didn't complete somehow: when the coherency issue occured I read the seqno via an uncached GTT mapping too. While the cached version of the seqno still showed the stale value the one read via the uncached mapping was the correct one. Work around this issue by clflushing the corresponding CPU cacheline following any store of the seqno and preceding any reading of it. When reading it do this only when the caller expects a coherent view. v2: - fix using the proper logical && instead of a bitwise & (Jani, Mika) - limit the workaround to A stepping, on later steppings this HW issue is fixed v3: - use a separate get_seqno/set_seqno vfunc (Chris) Testcase: igt/store_dword_loop_render Signed-off-by:
-
Rodrigo Vivi authored
We also need to call the frontbuffer flip to trigger proper invalidations when disabling planes. Otherwise we will miss screen updates when disabling sprites or cursor. On core platforms where HW tracking also works, this issue is totally masked because HW tracking triggers PSR exit however on VLV/CHV that has only SW tracking we miss screen updates when disabling planes. It was caught with kms_psr_sink_crc sprite_plane_onoff and cursor_plane_onoff subtests running on VLV/CHV. This is probably a regression since I can also get this with the manual test case, but with so many changes on atomic modeset I couldn't track exactly when this was introduced. Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Arun Siluvery authored
MI_STORE_REGISTER_MEM, MI_LOAD_REGISTER_MEM instructions are not really variable length instructions unlike MI_LOAD_REGISTER_IMM where it expects (reg, addr) pairs so use fixed length for these instructions. v2: rebase Cc: Dave Gordon <david.s.gordon@intel.com> Signed-off-by:
Arun Siluvery <arun.siluvery@linux.intel.com> Reviewed-by:
Mika Kuoppala <mika.kuoppala@intel.com> [danvet: Appease checkpatch as Mika spotted in i915_reg.h - it seems terminally unhappy about i915_cmd_parser.c so that would be a separate patch.] Signed-off-by:
-
- 25 Aug, 2015 1 commit
-
-
Graham Whaley authored
In commit d1675198: drm/i915: Integrate GuC-based command submission the drm.tmpl include lines reference the intel_guc_submission.c but the patch adds the file i915_guc_submission.c. drm.tmpl fails to build with: docproc: .//drivers/gpu/drm/i915/intel_guc_submission.c: No such file or directory Change the file reference to the actual file. Signed-off-by:
Graham Whaley <graham.whaley@linux.intel.com> Signed-off-by:
-
- 14 Aug, 2015 30 commits
-
-
Jani Nikula authored
There's so much scaler debugging messages that it makes other debugging hard. Remove them. Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Dave Gordon authored
This provides a means of reading status and counts relating to GuC actions and submissions. v2: Remove surplus blank line in output [Chris Wilson] v5: Added GuC per-engine submission & seqno statistics v6: Add per-ring statistics to client, refactor client-dumper. Signed-off-by:Alex Dai <yu.dai@intel.com> Reviewed-by:
Tom O'Rourke <Tom.O'Rourke@intel.com> Signed-off-by:
-
Alex Dai authored
GuC-based submission is mostly the same as execlist mode, up to intel_logical_ring_advance_and_submit(), where the context being dispatched would be added to the execlist queue; at this point we submit the context to the GuC backend instead. There are, however, a few other changes also required, notably: 1. Contexts must be pinned at GGTT addresses accessible by the GuC i.e. NOT in the range [0..WOPCM_SIZE), so we have to add the PIN_OFFSET_BIAS flag to the relevant GGTT-pinning calls. 2. The GuC's TLB must be invalidated after a context is pinned at a new GGTT address. 3. GuC firmware uses the one page before Ring Context as shared data. Therefore, whenever driver wants to get base address of LRC, we will offset one page for it. LRC_PPHWSP_PN is defined as the page number of LRCA. 4. In the work queue used to pass requests to the GuC, the GuC firmware requires the ring-tail-offset to be represented as an 11-bit value, expressed in QWords. Therefore, the ringbuffer size must be reduced to the representable range (4 pages). v2: Defer adding #defines until needed [Chris Wilson] Rationalise type declarations [Chris Wilson] v4: Squashed kerneldoc patch into here [Daniel Vetter] v5: Update request->tail in code common to both GuC and execlist modes. Add a private version of lr_context_update(), as sharing the execlist version leads to race conditions when the CPU and the GuC both update TAIL in the context image. Conversion of error-captured HWS page to string must account for offset from start of object to actual HWS (LRC_PPHWSP_PN). Issue: VIZ-4884 Signed-off-by: -
Dave Gordon authored
Turn on interrupt steering to route necessary interrupts to GuC. v6: Rebased Issue: VIZ-4884 Signed-off-by: -
Dave Gordon authored
A GuC client has its own doorbell and workqueue. It maintains the doorbell cache line, process description object and work queue item. A default guc_client is created for the i915 driver to use for normal-priority in-order submission. Note that the created client is not yet ready for use; doorbell allocation will fail as we haven't yet linked the GuC's context descriptor to the default contexts for each ring (see later patch). v2: Defer adding structure members until needed [Chris Wilson] Rationalise type declarations [Chris Wilson] v5: Add GuC per-engine submission & seqno statistics. Move wq locking to encompass both get_space() and add_item(). Take forcewake lock in host2guc_action() [Tom O'Rourke] v6: Fix GuC doorbell cacheline selection code (the cacheline-within-page calculation was wrong). Rename GuC priorities to make them closer to the names used in the GuC firmware source, matching what the autogenerated versions will (probably) be. Add per-ring statistics to client. Issue: VIZ-4884 Signed-off-by: -
Alex Dai authored
Allocate a GEM object to hold GuC log data. A debugfs interface (i915_guc_log_dump) is provided to print out the log content. v2: Add struct members at point of use [Chris Wilson] v6: Rebased Issue: VIZ-4884 Signed-off-by: -
Alex Dai authored
This adds the first of the data structures used to communicate with the GuC (the pool of guc_context structures). We create a GuC-specific wrapper round the GEM object allocator as all GEM objects shared with the GuC must be pinned into GGTT space at an address that is NOT in the range [0..WOPCM_TOP), as that range of GGTT addresses is not accessible to the GuC (from the GuC's point of view, it's permanently reserved for other objects such as the BootROM & SRAM). Later, we will need to allocate additional GuC-sharable objects for the submission client(s) and the GuC's debug log. v2: Remove redundant initialisation [Chris Wilson] Defer adding struct members until needed [Chris Wilson] Local functions should pass dev_priv rather than dev [Chris Wilson] v5: Invalidate GuC TLB after allocating and pinning a new object v6: Rebased Issue: VIZ-4884 Signed-off-by: -
Dave Gordon authored
GuC submission is basically execlist submission, but with the GuC handling the actual writes to the ELSP and the resulting context switch interrupts. So to describe a context for submission via the GuC, we need one of the same functions used in execlist mode. This commit exposes one such function, changing its name to better describe what it does (it's related to logical ring contexts rather than to execlists per se). v2: Replaces previous "drm/i915: Move execlists defines from .c to .h" v3: Incorporates a change to one of the functions exposed here that was previously part of an internal patch, but which was omitted from the version recently committed to drm-intel-nightly: 7a01a0a2 drm/i915/lrc: Update PDPx registers with lri commands So we reinstate this change here. v4: Drop v3 change, update function parameters due to collision with 8ee36152 drm/i915: Convert execlists_ctx_descriptor() for requests v5: Don't expose execlists_update_context() after all. The current version is no longer compatible with GuC submission; trying to share the execlist version of this function results in both GuC and CPU updating TAIL in the context image, with bad results when they get out of step. The GuC submission path now has its own private version that just updates the ringbuffer start address, and not TAIL or PDPx. v6: Rebased Issue: VIZ-4884 Signed-off-by: -
Alex Dai authored
The new node provides access to the status of the GuC-specific loader; also the scratch registers used for communication between the i915 driver and the GuC firmware. v2: Changes to output formats per Chris Wilson's suggestions v6: Rebased Issue: VIZ-4884 Signed-off-by: -
Alex Dai authored
This fetches the required firmware image from the filesystem, then loads it into the GuC's memory via a dedicated DMA engine. This patch is derived from GuC loading work originally done by Vinit Azad and Ben Widawsky. v2: Various improvements per review comments by Chris Wilson v3: Removed 'wait' parameter to intel_guc_ucode_load() as firmware prefetch is no longer supported in the common firmware loader, per Daniel Vetter's request. Firmware checker callback fn now returns errno rather than bool. v4: Squash uC-independent code into GuC-specifc loader [Daniel Vetter] Don't keep the driver working (by falling back to execlist mode) if GuC firmware loading fails [Daniel Vetter] v5: Clarify WOPCM-related #defines [Tom O'Rourke] Delete obsolete code no longer required with current h/w & f/w [Tom O'Rourke] Move the call to intel_guc_ucode_init() later, so that it can allocate GEM objects, and have it fetch the firmware; then intel_guc_ucode_load() doesn't need to fetch it later. [Daniel Vetter]. v6: Update comment describing intel_guc_ucode_load() [Tom O'Rourke] Issue: VIZ-4884 Signed-off-by: -
Ville Syrjälä authored
We only need the link_bw/rate_select parameters when starting link training, and they should be computed based on the currently active config, so throw them out from intel_dp and just compute on demand. Toss in an extra debug print to see rate_select in addition to link_bw, as the latter may be 0 for eDP 1.4. Signed-off-by:
Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> Signed-off-by:
-
Ville Syrjälä authored
intel_dp->link_bw is going away, so consul the port_clock instead when choosing between TP1 and TP3. Signed-off-by:
-
Ville Syrjälä authored
Currently we clobber intel_dp->lane_count in compute config, which means after a rejected modeset we may no longer be able to retrain the current link. Move lane_count into pipe_config to avoid that. v2: Add missing ':' to the pipe config debug dump Signed-off-by:
-
Ville Syrjälä authored
Use a separate variable for the TRANS_DP_CTL value instead of reusing 'tmp' that otherwise contains the DP port register value. Signed-off-by:
-
Ville Syrjälä authored
All the *_ddi_pll_select() functions get passed the port_clock and pipe config as parameters. We only need to pass the pipe config, and the functions can dig up the port_clock themselves. Signed-off-by:
-
Ville Syrjälä authored
Use port_clock instead of link_bw when picking the PLL parameters for DP. link_bw may be zero with an eDP 1.4 sink that supports DP_LINK_RATE_SET so we shouldn't use it for anything other than feed it to the sink appropriately. v2: Fix typo in commit message (Sivakumar) Reviewed-by:
-
Ville Syrjälä authored
Currently we treat intel_{dp,hdmi}->color_range as partly user controller value (via the property) but we also change it during .compute_config() when using the "Automatic" mode. That is a bit confusing, so let's just change things so that we store the user property values in intel_dp, and only change what's stored in pipe_config during .compute_config(). There should be no functional change. Signed-off-by: -
Chris Wilson authored
When we queue the command or operation to change the scanout address, we mark the flip as in progress. We can use this flag to prevent us from checking for a stalled flip prior to its existence! Signed-off-by:
-
Ville Syrjälä authored
Currently we don't clflush on pin_to_display if the bo is already UC/WT and is not in the CPU write domain. This causes problems with pwrite since pwrite doesn't change the write domain, and it avoids clflushing on UC/WT buffers on LLC platforms unless the buffer is currently being scanned out. Fix the problem by marking the cache dirty and adjusting i915_gem_object_set_cache_level() to clflush when the cache is dirty even if the cache_level doesn't change. My last attempt [1] at fixing this via write domain frobbing was shot down, but now with the cache_dirty flag we can do things in a nicer way. [1] http://lists.freedesktop.org/archives/intel-gfx/2014-November/055390.html v2: Drop the I915_CACHE_NONE/WT checks from pwrite Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=86422 Testcase: igt/kms_pwrite_crc Testcase: igt/gem_pwrite_snooped Signed-off-by:
-
Sonika Jindal authored
WA for BXT A0/A1, where DDIB's HPD pin is swapped to DDIA, so enabling DDIA HPD pin in place of DDIB. v2: For DP, irq_port is used to determine the encoder instead of hpd_pin and removing the edp HPD logic because port A HPD is not present(Imre) v3: Rebased on top of Imre's patchset for enabling HPD on PORT A. Added hpd_pin swapping for intel_dp_init_connector, setting encoder for PORT_A as per the WA in irq_port (Imre) v4: Dont enable interrupt for edp, also reframe the description (Siva) v5: Don’t check for PORT_A in intel_ddi_init to update dig_port, instead avoid setting hpd_pin itself (Imre) Signed-off-by:
Sonika Jindal <sonika.jindal@intel.com> Reviewed-by:
-
Sonika Jindal authored
Also remove redundant comments. Signed-off-by:
-
Michel Thierry authored
And fix 0-DAY kernel test infrastructure warning. Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Michel Thierry <michel.thierry@intel.com> Reviewed-by:
-
Michel Thierry authored
With the offset length being taken care of in ("drm/i915/gtt: Allow >= 4GB offsets in X86_32"), the code should be finally safe in 32-bit kernels. This reverts commit 501fd70f Author: Michel Thierry <michel.thierry@intel.com> Date: Fri May 29 14:15:05 2015 +0100 drm/i915: limit PPGTT size to 2GB in 32-bit platforms Signed-off-by: -
Michel Thierry authored
Similar to commit c44ef60e ("drm/i915/gtt: Allow >= 4GB sizes for vm"), i915_gem_obj_offset and i915_gem_obj_ggtt_offset return an unsigned long, which in only 4-bytes long in 32-bit kernels. Change return type (and other related offset variables) to u64. Since Global GTT is always limited to 4GB, this change would not be required in i915_gem_obj_ggtt_offset, but this is done for consistency. v2: Remove unnecessary offset variable in do_pin, as we already have vma->node.start (Chris). Update GGTT offset too (Tvrtko). Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by:
-
Rodrigo Vivi authored
By Vesa DP 1.2 spec TEST_CRC_COUNT is a "4 bit wrap counter which increments each time the TEST_CRC_x_x are updated." However if we are trying to verify the screen hasn't changed we get same (count, crc) pair twice. Without this patch we would return -ETIMEOUT in this case. So, if in 6 vblanks the pair (count, crc) hasn't changed we return it anyway instead of returning error and let test case decide if it was right or not. Signed-off-by:
Rafael Antognolli <rafael.antognolli@intel.com> Signed-off-by:
-
Rodrigo Vivi authored
By Vesa DP 1.2 Spec TEST_CRC_COUNT should be "reset to 0 when TEST_SINK bit 0 = 0." However for some strange reason when PSR is enabled in certain platforms this is not true. At least not immediatelly. So we face cases like this: first get_sink_crc operation: count: 0, crc: 000000000000 count: 1, crc: c101c101c101 returned expected crc: c101c101c101 secont get_sink_crc operation: count: 1, crc: c101c101c101 count: 0, crc: 000000000000 count: 1, crc: 0000c1010000 should return expected crc: 0000c1010000 But also the reset to 0 should be faster resulting into: get_sink_crc operation: count: 1, crc: c101c101c101 count: 1, crc: 0000c1010000 should return expected crc: 0000c1010000 So in order to know that the second one is valid one we need to compare the pair (count, crc) with latest (count, crc). If the pair changed you have your valid CRC. Signed-off-by:
-
Rodrigo Vivi authored
By Vesa DP spec, test counter at DP_TEST_SINK_MISC just reset to 0 when unsetting DP_TEST_SINK_START, so let's force this stop here. But let's minimize the aux transactions and just do it when we know it hasn't been properly stoped. Signed-off-by:
-
Michel Thierry authored
GTT was only 32b and its max value is 4GB. In order to allow objects bigger than 4GB in 48b PPGTT, i915_gem_userptr_ioctl we could check against max 48b range (1ULL << 48). But since the check no longer applies, just kill the limit. v2: Use the default ctx to infer the ppgtt max size (Akash). v3: Just kill the limit, it was only there for early detection of an error when used for execbuffer (Chris). Cc: Akash Goel <akash.goel@intel.com> Reviewed-by:
Akash Goel <akash.goel@intel.com> Signed-off-by:
-
Michel Thierry authored
Otherwise it can overflow in 48-bit mode, and cause an incorrect exec_start. Before commit 5f19e2bf ("drm/i915: Merged the many do_execbuf() parameters into a structure"), it was already an u64. Signed-off-by:
-
Michel Thierry authored
In a 48b world, users can try to allocate buffers bigger than 4GB; in these cases it is important that size is a 64b variable. v2: Drop the warning about bind with size 0, it shouldn't happen anyway. Signed-off-by:
-
