- 05 Dec, 2006 3 commits
-
-
Grant Likely authored
Signed-off-by:
Grant Likely <grant.likely@secretlab.ca> Signed-off-by:
Paul Mackerras <paulus@samba.org>
-
Grant Likely authored
The support for the 52xx-based systems is now included under CONFIG_CLASSIC32, since the 52xx chips have a 603e-based core. Signed-off-by:
-
Geoff Levand authored
Add a powerpc make target that can be loaded by the ps3 bootloader (kboot) and set this as the default image to build for that platform. Until the compressed zImage wrapper is made, this arranges for a stripped vmlinux image to be built. Signed-off-by:
Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by:
-
- 04 Dec, 2006 37 commits
-
-
Grant Likely authored
Needed to support mpc52xx boards in arch/powerpc. This patch retains the platform_bus support when compiling for arch/ppc, but uses the of_platform bindings for arch/powerpc. Signed-off-by:
Sylvain Munaut <tnt@246tNt.com> Signed-off-by:
-
Grant Likely authored
Single typo fix and whitespace changes. In preparation for heavy changes to this driver when support for arch/powerpc is added. Since the driver will be changing significantly anyway, then may as well take the opportunity to clean it up first. Signed-off-by:
-
Sergei Shtylyov authored
Cure the damage done by the former PCI debug printks fix for the case of 64-bit resources (commit 685143ac) which broke it for the plain vanilla 32-bit resources... Signed-off-by:
Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by:
-
Yan Burman authored
Replace kmalloc+memset with kzalloc. Signed-off-by:
Yan Burman <burman.yan@gmail.com> Signed-off-by:
-
Guennadi Liakhovetski authored
Support for the Kurobox(HG)/LinkStation-I NAS systems by Buffalo Technology, should be also applicable to the PPC TeraStation family. Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
Kumar Gala <galak@kernel.crashing.org> Signed-off-by:
-
Scott Wood authored
This core is used in Freescale's 831x chips. Signed-off-by:
Scott Wood <scottwood@freescale.com> Signed-off-by:
-
Mariusz Kozlowski authored
Add missing bracket in definition for m48t35 RTC chip. Signed-off-by:
Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by:
-
Stephen Rothwell authored
Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Stephen Rothwell authored
Signed-off-by:
-
Stephen Rothwell authored
Remove CPU_FTR_16M_PAGE from the cupfeatures mask at runtime on iSeries. Signed-off-by:
-
Stephen Rothwell authored
and therefore combined builds. Signed-off-by:
-
Stephen Rothwell authored
xmon still does not run on iSeries, but this allows us to build a combined kernel that includes it. Signed-off-by:
-
Linas Vepstas authored
Defconfig ppc64 kernels running under late-model distros may hang in the automounter rc.d script, which seems to be expecting autofs version 4. This patch uses the newer autofs. Signed-off-by:
Linas Vepstas <linas@austin.ibm.com> Signed-off-by:
-
Paul Mackerras authored
This adds the "logical" PVR value used by POWER6 in "compatible" mode to the list of PVR values that the kernel tells firmware it is able to handle. Signed-off-by: -
Geert Uytterhoeven authored
Add a rule to clean up the various generated image files in arch/powerpc/boot. Signed-off-by:
Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by:
-
Olof Johansson authored
For PCI devices with only io ports, of_bus_pci_get_flags() will fall through and still mark the resource as IORESOURCE_MEM. Signed-off-by:
Olof Johansson <olof@lixom.net> Acked-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Grant Likely authored
Signed-off-by:
-
Grant Likely authored
Signed-off-by:
-
Grant Likely authored
Signed-off-by:
-
Grant Likely authored
Adds utility routines used by 52xx device drivers and board support code. Main functionality is to add device nodes to the of_platform_bus, retrieve the IPB bus frequency, and find+ioremap device registers. Signed-off-by:
-
Sylvain Munaut authored
There is no need to expose these settings outside the scope of the interrupt controller code itself. Signed-off-by:
-
Grant Likely authored
The Efika board isn't different enough from other 52xx based boards to justify a separate platform. This patch merges it with the support code for all other 52xx based boards. Signed-off-by:
-
Grant Likely authored
platforms/embedded6xx is probably going away, and 52xx boards need some extra support the 52xx interrupt controller and DMA engine anyway. It makes sense to group all the 52xx bits into a single path. Signed-off-by:
-
Grant Likely authored
No other chips use this device, it belongs in a 52xx-specific path. Signed-off-by:
-
Grant Likely authored
This document describes the device tree expectations for mpc52xx based boards. Signed-off-by:
-
Stephen Rothwell authored
It doesn't hurt to have this enabled on legacy iSeries and will mean it is available for a combined build. Signed-off-by:
-
Stephen Rothwell authored
Commit 3ccfc65c missed the same fixes for legacy iSeries specific code, so make some more symbols no longer global. Signed-off-by:
-
Rutger Nijlunsing authored
Mostly taken from corresponding Makefile's make-clean rule. Tested by (cross)compiling for $ARCH PPC and POWERPC and checking output of git-status. Signed-off-by:
Rutger Nijlunsing <git-commit@tux.tmfweb.nl> Signed-off-by:
-
Michael Ellerman authored
To allow arch/powerpc/kernel/crash.c to build on 32-bit we need a definition of hard_irq_disable(). 32-bit doesn't support the lazy interrupt disabling mechanism, so on 32-bit hard_irq_disable() is simply local_irq_disable(). Add a definition for hard_irq_enable() just for completeness. This allows (KEXEC=y && PPC32=y) to build again. Broken since d04c56f7. Signed-off-by:
Michael Ellerman <michael@ellerman.id.au> Signed-off-by:
-
Adrian Bunk authored
"extern inline" generates a warning with -Wmissing-prototypes and I'm currently working on getting the kernel cleaned up for adding this to the CFLAGS since it will help us to avoid a nasty class of runtime errors. If there are places that really need a forced inline, __always_inline would be the correct solution. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Vitaly Wool authored
This adds support for flash device descriptions to the OF device tree. It's inspired by and partially borrowed from Sergei's patch "[RFC] Adding MTD to device tree.patch". Signed-off-by:
Vitaly Wool <vwool@ru.mvista.com> Signed-off-by:
-
Mohan Kumar M authored
This allows any secondary CPU thread also to become boot cpu for POWER5. The patch is required to solve kdump boot issue when the kdump kernel is booted with parameter "maxcpus=1". XICS init code tries to match the current boot cpu id with "reg" property in each CPU node in the device tree. But CPU node is created only for primary thread CPU ids and "reg" property only reflects primary CPU ids. So when a kernel is booted on a secondary cpu thread above condition will never meet and the default distribution server is left as zero. This leads to route the interrupts to CPU 0, but which is not online at this time. We use ibm,ppc-interrupt-server#s to check for both primary and secondary CPU ids. Accordingly default distribution server value is initialized from "ibm,ppc-interrupt-gserver#s" property. We loop through ibm,ppc-interrupt-gserver#s property to find the global distribution server from the last entry that matches with boot cpuid. Signed-off-by:
Mohan Kumar M <mohan@in.ibm.com> Signed-off-by:
-
Arnd Bergmann authored
At least the ide driver calls pcibus_to_node, which is not defined when CONFIG_PCI is disabled. This adds a nop function for the !PCI case. Signed-off-by:Arnd Bergmann <arnd.bergmann@de.ibm.com>
-
Arnd Bergmann authored
sys_mmap is declared in asm/syscalls.h Signed-off-by: -
Arnd Bergmann authored
It's currently not possible to build the default zImage target if PS3 is the only selected platform. This is a hack to fall back to building the pseries style zImage, so the build is successful. This will probably change in the future, if someone writes a PS3 specific boot wrapper. Signed-off-by: -
Arnd Bergmann authored
A few code paths need to check whether or not they are running on the PS3's LV1 hypervisor before making hcalls. This introduces a new firmware feature bit for this, FW_FEATURE_PS3_LV1. Now when both PS3 and IBM_CELL_BLADE are enabled, but not PSERIES, FW_FEATURE_PS3_LV1 and FW_FEATURE_LPAR get enabled at compile time, which is a bug. The same problem can also happen for (PPC_ISERIES && !PPC_PSERIES && PPC_SOMETHING_ELSE). In order to solve this, I introduce a new CONFIG_PPC_NATIVE option that is set when at least one platform is selected that can run without a hypervisor and then turns the firmware feature check into a run-time option. The new cell oprofile support that was recently merged does not work on hypervisor based platforms like the PS3, therefore make it depend on PPC_CELL_NATIVE instead of PPC_CELL. This may change if we get oprofile support for PS3. Signed-off-by: -
Geert Uytterhoeven authored
When renaming CONFIG_PS3 to CONFIG_PPC_PS3, a few occurrences have been missed. I also fixed up the alignment in arch/powerpc/platforms/Makefile. Signed-off-by:
-
